Program stops immediately after pressing any key on the keyboard.  Can no longer enter data in data fields.

Similar Questions

• Computer off, showing U2913WM "there is no signal from your computer press any key on the keyboard.

  Hi all

  Any help on this incredibly annoying would be much appreciated; I googled the out of him, but without success. I have a month or so old Dell U2913WM which I am more than happy with picturewise, but he demonstrated a very annoying problem. Whenever my PC goes to sleep, or worse, when I turn off my system, the monitor goes power save mode BUT after 30 minutes or so flashes upward:
  "There is no signal from your computer. Press any key on the keyboard or move the mouse to wake him up. If there is no display, place the monitor button now to select the correct input in the on-screen Display menu source. »
  It then repeats this message every 3 minutes approximately.

  I tried to reset the options in the menu of the screen, change the PC drivers (although this may not be the issue once the PC is turned off) and checking the dual link cable DVI for bent pins. Nothing worked and he drives me crazy! I have also another 22 "Dell Ultrasharp plugged on the GTX 780 and who falls asleep without problem. Any help would be most welcome!

  Thanks :)

  OK I fixed this annoying problem. I thought I'd post here in case someone else falls on this problem.

  To remedy this I simply connected via DisplyPort and the monitor is no longer wakes himself of no apparent reason.

• After turning on the computer, the Touchpad does not work until I have press a key on the keyboard

  Original title: Touch Pad issue

  Hello

  Every time I turn on the computer touchpad does not work (in the form of connection), first I press any key on the keyboard once I press a button and then press the mouse will start to work, I don't know what exactly is the problem... I reinstalled the drivers, checked in services but still the same. Can someone help me on this.

  Kind regards

  NGO

  Hello, NGO,

  Changes were made on the computer before the show?

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps.

  Method 2:

  I suggest you to return the item and check if it helps:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

  Let us know if it helps.

• Satellite P205 - hit ANY key on the keyboard opens the default browser

  Very strange problem with our Toshiba Satellite P205.
  Hit ANY key on the keyboard opens the default browser. For example, type a ten letter word ten browser windows opens. We have replaced the keyboard but the problem persists. Toshiba repair center suggested replacing the motherboard at $500 (which isn't on the cost of a new cell phone?).

  Works very well without any problem using an external keyboard.
  It came with Vista, but we installed XP with the same results. Also tried upgrading the Bios.

  * Water was spilled on this computer laptop previously.*
  * It is out of EMCO.*

  Is there maybe a registry tweak that can block the default browser to open this way?
  Anyone has any ideas on this one?

  There is a 'hard' switch just above the keyboard that opens the browser. I guess the connectors or printed circuits are corroded or damaged somehow so that any input on the keyboard also triggers this hard switch.

  Possibly a hack software to disable or block the button "Open browser" would solve the problem. How to turn off or reassign these hard buttons?

  Any help or ideas would be appreciated.

  > Toshiba repair center suggested replacing the motherboard at $500 (which isn't on the cost of a new cell phone?).
  Looks like you need to replace the motherboard if you do not want to use the computer's internal keyboard correctly
  You said that the water was reversed on this laptop previously, I think that's the reason why this keyboard problem happened

  > Is it may be a registry tweak that can block the default browser to open this way?
  It s unclear not for me if something like this is not possible, but in my opinion has nothing to do with the software (register), but with the hardware problem caused by spilled water
  You could try to reinstall the clean Windows operating system in order to check if this will help you
  But if the new facility doesn't help then you should use the external keyboard because I doubt a replacement of the motherboard would be an option due to high costs.

• When I press any key on my keyboard, my mouse click but the pointer move.

  My computer is a Gateway NV53 with Windows 7.  My mouse pad is a Synaptics TouchPad V7.2.  Whenever I press any of the buttons on my keyboard, if I play a game or not, it "replaces" the ability to move the pointer.  I find nothing in any of the menus "Control Panel > mouse properties > device settings > settings...". ' who have yet set.  That maybe somebody has some ideas about how to "disable" the "substitution"?

  Found this on techsupportforum.com and this worked for me...

  "Posted by kaufmann91 .

  Great success!

  One of my friends understood the problem.
  Go to control panel and the properties of the mouse, click on the device settings tab and select "Synaptics TouchPad". Click settings, and it should bring up another window.

  In the list select Pointing > sensitivity > PalmCheck and by default, the bar is more to the right, between Minimum and Maximum, slide the bar completely to a Minimum and the problem should be solved! You can now move the pointer when you type. : D »

• When I click on the address bar or any key on the keyboard, I have more strong click and can print only at the rate of oneletter every three seconds. Any help, please?

  When I click on the address bar I get loud click and cannot enter a letter by pressing the button for 3 or 4 seconds. Any help, please?

  It seems that if you have enabled accessibility or ease of Access Options in Windows (perhaps keys filters). Without knowing which version of Windows you have, I can't point you to specific instructions, but here are some useful pages:

  Windows 7: http://www.microsoft.com/enable/products/windows7/
  http://Windows.Microsoft.com/en-us/Windows7/make-the-keyboard-easier-to-use

  Windows Vista: http://www.microsoft.com/enable/products/windowsvista/

  Windows XP: http://www.microsoft.com/enable/products/windowsxp/

• How to create a keypress event to ANY key of the keyboard key? (not a specific key.)

  I realize that if I use:

  If (e.which == 81) {}

  No matter what

  }

  I can activate an action based on the key being pressed 81.

  
  But how can I do the same thing, regardless of which key is pressed?
  
  

  Sorry, thought about it...
  I just don't need to specify an if... at all.
  Duh!

• my audio keys on the keyboard are no longer works

  I have a laptop dv7020 that I bought recently and I've updated my software (Windows 7) and now my audio keys on my keyboard don't seem to work. Could someone tell me what I should do to fix this problem, it's driving me crazy!

  Only the multimedia keys don't work in the volume control, mute, etc.? Or your Audio does not at all?

  Enter the BIOS by typing/holding the F10 key immediately after switching on the laptop. Reset to the default settings by pressing the F9 key, (maybe F5-check wallpaper for the correct key) Save & Exit.

• Press any key to put an end to an exe BACKS run in system.exe VI

  Hi I am running some old programs exe based BACK.  Two programs that run one after the other, loop and redo (variables are modified for each loop) the first exe program requires the user to "press any key" to put an end (close window CMD.  When I start my VI using the sub - VI system.exe to run DOS programs I have to "Press any key" to close the window and leave my VI to continue a loop.  Or if I use the option 'Until the end', I find myself with a bunch of Windows CMD to close at the end.  There must be a simple way to "simulate a key shot" Plan B is to train a monkey to sit in front of the key board...

  I using Labview 2013 under windows XP / 7

  Thank you

  Check out this post.  If this does not work for you, you can try to use SendKey in a Powershell script.  Good luck.

  Full disclosure, I did none of these, can't vouch for their usefulness.

• My calculator is open several times.without by pressing any key

  whenever I touch any key on the keyboard and then several calculators are open.

  Hi Waqar,

  Thank you for the information.

  1. have you tried the suggestions provided by Babu V?

  2. If so, what are the results?

  If the problem persists, I suggest you perform a file system (CFS) Checker scan and get back to us with the results.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Please get back to us with the information above to help you accordingly.

• slide show by using the keys on the keyboard for nav in flash professional CS5 with animated images

  recently, I discovered how to create a slideshow using the keys on the keyboard for the market front and rear in flash professional CS5 thanks entirely to kglad of this forum. I used still images for each slide, since, then with one of the slides, I added a slight undulation of water in one of the images in a separate document. is it possible to include this file in my slideshow now?

  original questions and answers using still pictures below

  I'm a graphic designer who has a presentation of my portfolio. I'm not too experienced in flash and do not use it much, but he needs to do this on the thing. I can do a fade in and out slide show, but I want to create a slide show where the screen remains out of the blade and does ' t until what I press the next or previous button. I don't want these keys on the screen, I want to be able to press a key on the keyboard as F1. is this possible and do you know in adobe flash Professional (or other adobe products) where I could get resources/tutorials to do. Any help so what would never be great.

  response

  create tweens to fade for each slide.  You'll probably want to fade out the image on image 1 (from frames 1 to 11).  Bland-in the image of frame 11 frame 1 to 11.  fade the image frame 11 11 to 21 etc.

  You can then use:

  var image: int = 1;

  var dir:uint;

  stage.addEventListener (KeyboardEvent.KEY_DOWN, downF);

  function downF(e:KeyboardEvent):void {}

  {if(e.keycode==Keyboard.Left)}

  dir = Keyboard.LEFT

  Frame = Math.Max (Frame-10, 1);

  this.addEventListener (Event.ENTER_FRAME, nextF);

  } else {if(e.keyCode==Keyboard.RIGHT)

  dir = Keyboard.RIGHT;

  Frame = Math.min (this.totalFrames, Frame + 10);

  this.addEventListener (Event.ENTER_FRAME, nextF);

  }

  }

  function nextF(e:Event):void {}

  {if(dir==Keyboard.Left)}

  prevFrame();

  } else {}

  nextFrame();

  }

  {if(this.currentFrame==Frame)}

  this.removeEventListener (Event.ENTER_FRAME, nextF);

  }

  }

  you have the fla that created the swf file?

  If so, just copy images from this fla and paste into a new movieclip in your fla slideshow.  Add this movieclip to your timeline.

• slide show by using the keys on the keyboard for before back in flash professional CS5

  I'm a graphic designer who has a presentation of my portfolio. I'm not too experienced in flash and do not use it much, but he needs to do this on the thing. I can do a fade in and out slide show, but I want to create a slide show where the screen remains out of the blade and does ' t until what I press the next or previous button. I don't want these keys on the screen, I want to be able to press a key on the keyboard as F1. is this possible and do you know in adobe flash Professional (or other adobe products) where I could get resources/tutorials to do. Any help so what would never be great.

  the best way to do what you want (but not the most flexible/changeable) would be to add each slide a key frame to its own layer.  It is a design decision, but start with keyframes at 1, 11, 21 etc.

  create tweens to fade for each slide.  You'll probably want to fade out the image on image 1 (from frames 1 to 11).  Bland-in the image of frame 11 frame 1 to 11.  fade the image frame 11 11 to 21 etc.

  You can then use:

  var image: int = 1;

  var dir:uint;

  stage.addEventListener (KeyboardEvent.KEY_DOWN, downF);

  function downF(e:KeyboardEvent):void {}

  {if(e.keycode==Keyboard.Left)}

  dir = Keyboard.LEFT

  Frame = Math.Max (Frame-10, 1);

  this.addEventListener (Event.ENTER_FRAME, nextF);

  } else {if(e.keyCode==Keyboard.RIGHT)

  dir = Keyboard.RIGHT;

  Frame = Math.min (this.totalFrames, Frame + 10);

  this.addEventListener (Event.ENTER_FRAME, nextF);

  }

  }

  function nextF(e:Event):void {}

  {if(dir==Keyboard.Left)}

  prevFrame();

  } else {}

  nextFrame();

  }

  {if(this.currentFrame==Frame)}

  this.removeEventListener (Event.ENTER_FRAME, nextF);

  }

  }

• Hello. I recently got a new computer and transfer all my files across using Time Machine. Whenever I try to connect to any CC (including CC) program, the program stops immediately and an Apple error happens. I uninstalled and reinstalled CC

  Hello. I recently got a new computer and transfer all my files across using Time Machine. Whenever I try to connect to any CC (including CC) program, the program stops immediately and an Apple error happens. I have uninstalled and reinstalled CC twice with no result and removed all Adobe products on my computer and nothing works.

  I've seen similar discussions before... transfer does not work, you must install

  Discussions of re - install

  -http://forums.adobe.com/thread/1408331?tstart=0

  -http://forums.adobe.com/thread/1398961?tstart=0

  - and http://helpx.adobe.com/creative-cloud/help/install-apps.html

  -using the vacuum after you have uninstalled and before reinstalling will usually help

  -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Here

• Canon 5 d MK IV LiveView stops immediately after having been pressed with Tamron SP 70-200mm F/2.8

  My Canon 5 d MK IV Live View will stop immediately after having been pressed with a Tamron SP 70-200 F/2.8 Di lenses.

  I don't see the problem happens with my lens F / 2.8 Canon 24-70mm.

  This problem happened in video mode.

  I hope that there is a setting I have to toggle to make this objective work in Live View mode?

  Thank you

  Mark

  I spoke to my local camera shop, they said, that it should be referred to the Tamron for the update of the firmware, they said, that Tamron has a fairly good hand around time of approximately 5 days. I've probably will send mine once I'm done with a shoot.

  The lens works very well for me, normally, the only problem for me is Live View. If this is not the case, use the LIve View, it seems to work great so it's not paralyze me right now, but it would be nice to just get it fixed if Live View will work.

  The camera is also on Firmware V1.01 so their will be updates firmware for it also and as a previous post said that Canon will also address the issues with 3rd party lenses. Great! After that all the Canon doesn't want people who have glasses of third parties avoiding the body of the camera for this problem. It's logical Canon would solve this problem.

  So far it is a minor bump with third party lenses. I've always been able to work with my Tamron and Sigma lenses. Just a couple of workarounds until the firmware is updated. It isn't a deal breaker for me. This camera is a pleasure to shoot with and I am very pleased with the Canon has advanced in the development, image quality with the dynamic range and low light performance. I am happy and have no regrets.

  I would still recommend this camera to a friend.