Program to backup under Vista

Similar Questions

• Delete files from backup under Vista

  Recently made a backup under Vista.  Now, get the message saying I need to delete files from D: drive to create more space.  Have you tried the various responses on previous assignments, but nothing works

  Thanks for this Bill.  I have since gone on the Dell forum and discovered how to delete the backup.  It is very easy - for anyone else who has this problem: computer goto, drive d, select the folder with your name or nickname of PC (usually the first folder) and delete it.

  See you soon,.

  Debs

• Backup under Vista, Shadow copy to hard drive provider unable 0x8004230F error there was an error.

  The above error when I try to backup my hard drive or create a restore point. There is no restore point on my HP Pavilion while I run CHKDSK. In all other respects, the machine works fine. When you try to save the program starts but fails with the above error 10 seconds later.

  Hi Anthony,.

  What is the full error message?

  Follow the suggestions below for a possible solution:

  Check if all files have been created on the hard drive (or anywhere where you are trying to save).

  Check the VSS service in the services window. Use the following steps to check:

  a. click Start and type services.msc in the search box

  b. search for the shadow copy volume service

  Make sure that the Startup type is Automatic.  Steps to set the auto services

  c. search for the service

  d. right-click on the service

  e. If the service is stopped and then Start the service

  f. Select Properties

  g and in the Startup type , select Automatic

  You can also see the following article for more information:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

   

  Hope it will be useful. Incase if you have further queries please reply and we will be happy to help you.

• How to remove old files from backup under vista

  How can I delete old backup files?

  Hi AcieWorkman,
  Thanks for posting in the Microsoft community!
  I understand that you want to remove old backup files created using the Backup Wizard. Please correct me if I'm wrong.
  Please follow the steps under How can I delete a backup I created using the back up files Wizard?
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.
  We can't wait to hear back on your part.

• Error when you try to run Windows backup under Vista

  I keep getting error messages when I try to run the Windows backup to an external drive. Aired these backups every month for a while with no problems, but now he keeps by default. An old laptop, so I am running vista.

  First of all, I got this message "error 0x8007045D: the request could not be performed because of an i/o device error." After looking on the suggestion of a forum has been a problem with the external hard drive, so I ran check disk but who gave the fire. At the same time, I tried to open a file on a separate external drive to get a similar error message - seems a little by chance...

  Because the disk check gave the fire I tried to climb back again, to get the message ' the shadow copy creation timed out. " Repeat (0 x 81000101).

  Hoping that someone would have an idea of how to fix this?

  Thank you!

  Try this link suggestions

• You try to run the backup under Vista, error 800704 3

  My computer uses windows vista Home premium. When I try to run a backup I get error code 800704 3. I don't know what is this error, anyone know and how to fix it.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• I wrote a program using windows visual with windows 95 that does not run the 300 in vist compatibility dll file, how can I make it work under vista

  I need instructions for details on how to get this written self program for working under vista

  responsible to: * address email is removed from the privacy *

  I call this Whatday program, it is a calendar program

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
   
  http://social.msdn.Microsoft.com/forums/en-us/categories/  
  

• How to run a BACK 16-bit based program under Vista

  Original title: back based progamme
  conducting a program of CAD old back, but when I execute execute sequence window flashes upward, then disappears, do not get enough time to read what he said. How to run a 16-bit program back under vista? is it possible to run a program of back under vista. I'm kinda a noob so keep it light wieght for me...

  Hello

  Windows Vista does not include a 16-bit subsystem. So, you will not be able to run 16-bit applications on Windows Vista directly. However, you can install Virtual PC on your
  Vista computer and then you can install Windows XP on your virtual PC to run 16-bit applications.

  You can download Virtual PC for Vista from the link below:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=04D26402-3199-48A3-AFA2-2DC0B40A73B6&displaylang=en

  Also check out this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Virtual-PC-2007-run-multiple-operating-systems-without-multibooting

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install any program because not supported under Vista, but my PC is Windows 7 Pro 64-bit

  I try to install Rockwell Automation Studio 5000, but I get an error message saying "Studio 5000 is not supported on Windows Visa without Service Pack 1 or higher". However my PC is under Windows 7 Pro (64 bit) and Vista that is covered by the requirements of this program.

  Any ideas?

  What is the version number of Studio 5000 you have?

  You can try to install using the "compatibility mode".

  What is program compatibility?
  Program compatibility is a mode in Windows that allows you to run programs written
  for earlier versions of Windows. Most programs written for Windows Vista are also running Windows 7,
  but some older programs might run poorly or not at all.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Compatibility mode - make sure to run older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Windows 7 Compatibility Center
  See if your software or hardware is listed and what options you have

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Learn how to use the Mode of Windows 7 compatibility with legacy applications

  http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps

  Using Windows 7 or Vista Compatibility Mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html

  J W Stuart: http://www.pagestart.com

• Can I run an old program BACK under Vista?

  Is it possible to run an old program BACK on a Vista operating system. either 32 or 64 bit?

  I found a simple painless 3rd party open source solution. It is simply done by running a BACK EMU called Dosbox.

  Use the latest version of www.dosbox.com.

  Read the easy to understand by the Doc for the command line interface commands. Worked perfectly the first time to run an old (something 80) BACK ASCII B & W strategy game that I use to start BACK on a 4 platform mghz v3.2 clone IBM XT.

• Program under Vista

  Help for the program I run Windows Vista 32-bit. I tried to use the program to help with different software and get the message Windows Vista can't HELP them. Microsoft has a program that you download which will allow programs to work in Vista. I tried to download the correct version(32bit) and it won't download. What can I do?

  Hello

  You can download the Windows Help program (WinHlp32.exe) for Windows Vista from here:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=6EBCFAD9-D3F5-4365-8070-334CD175D4BB&displaylang=en

• How were you completely delete a / profile under vista user account?

  How were you completely delete a / profile under vista user account?

  I have a virus on a different user profile, and I just want to remove this profile.

  (ON VISTA)

  Hello

  How to remove a Vista user account - even if you do this, you should check as well
  for malware.
  http://www.Vistax64.com/tutorials/93026-user-account-delete.html

  Even if you do not see the virus on your other profiles, it might be in areas that will subsequently
  cause problems in the other profiles. It would be preferable to eliminate malware from the machine
  that can be done without using the profile infected from an ADMIN account.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

• Satellite A500 PSAM3A - how to get the HARD market under Vista 64-bit disk Protection System

  Hello

  I would like to know how to get the HARD drive Protection system up and running under Vista Home Premium 64 bit operating system. I downloaded the program 64 bit of Toshiba for this program and install it I tried but doesn't seem to work. I have uninstalled and try to install the program, but still does not work.

  Unable to find the problem, why it won't work. If anyone knows how to solve this problem it would be a great
  help for me. If anyone knows how to solve this problem please answer me as soon as possible.

  Thank you for your time.

  Kind regards
  Nigel.

  Hello!

  What you downloaded exactly on the Toshiba site?

  As written Akuma you must install first added value Package you will find also on the Toshiba site. Check this box!

  An interesting thing: it does not work if you are using the preinstalled operating system? It should have everything installed for your laptop.

  Good bye

• Why 2 partitions of OS on HP dv9628 laptop computer under Vista Home Premium?

  I was just checking my wife of the older HP Pavilion dv9628nr under Vista Home Premium with 2 HARD drives.  I didn't even know he had 2 HARD drives.  I opened the case to make sure.

  Here is a screenshot of disk for system management.  I have a few questions:

  1. Why is there a system operating on each HARD drive partition?

  2 are 2 necessary and deleted maybe?

  

  Generally however, the C: drive is not always your primary. This may change if based on the installation program. The installer in this book, could be Raid. This is where the 2 drives are used to create a combined drive. Based on the laptop being adverstised as a drive of 240 GB, but with 2 120 GB drives in it. This is most likely how it was setup. To know for sure you'd have to check to see if this feature is enabled in the BIOS.  Before you change any settings that you would like to make sure that you have recovery discs and backed up all the content. As having the OS on a single disk, you will need to disable Raid in bios and probably to format both drives. Then reinstall the operating system on you get (the one listed as C:, to avoid complications).

  This article (from ehow.com) can help with your Bios check, so that you can see if Raid is enabled and if you choose to disable. How to disable Raid BIOS

  I hope you're able to help.

• Move the Users folder to another drive or partition under Vista 64

  I want to move my full users folder to another drive or partition under Vista 64-bit.

  I found these instructions to do with Windows 7 and confirm that they work very well on a Windows 7 computer I set up yesterday.
  http://Lifehacker.com/5467758/move-the-users-directory-in-Windows-7
  ROBOCOPY, RMDIR, MKLINK programs all exist in Vista and have all the command line switches such as specified in section of Windows 7.
  I want to use junction points as described in the article, rather than messing around with search-and-replace in registry. The use of junction points is cleaner and easier to reverse if I ever need to move the Users back folder to its original location.
  These same instructions for Windows 7 works with Vista 64 bit to move my users folder to a different hard disk or partition?

  Well, I couldn't wait any longer for a response.

  So I gave him a test and Windows 7 instructions work perfectly with Vista 64 - bit word. Hope it will be useful to someone else.