SMU, used for the measurement of current
Hello
I need to measure current in the range 5 to exit 10uA by a current source PIN. I would have usually connected PXI4065 on this PIN and measured current. But in this case the current to be measured is low.
I have EMS 4130, which has high accuracy of current measurement to 200mA range (0.03%+0.02)uA.
Can I use the current part of the EMS (CH1) measurement to measure current? What should I activate CV outputs (Hi = 0V) who appears in the soft front panel?
Or just without activating the outputs I can measure the current sink. The program of flexible panel displays current measurements, but I don't know if the EMS can be used like that.
Thank you
Not sure NI SMEs, as I have not had the chance to use it yet. SMU of Agilent could be used this way, so I guess with OR as well. You must use out SMU in constant voltage source / I measure mode. Would you say the SMU to hold the voltage at 0V, and allow current to the sink (or source) as necessary to maintain this 0V output.
Tags: NI Products
Similar Questions
-
The pp Skycure is interesting to use for the security of the iPhone?
I doubt it. You need some protection when the computer opened and then install and use a VPN. SaturnVPN is effective and inexpensive.
-
What is the MTBF method, used for the cRIO 9012, is the method of counting of Telcordia under what conditions? (Temperature, humidity, etc.)
Hi jojosalud,
According to the specifications for the cRIO-9012, the MTBF is 330 481 hours at 25 ° C; Question of Bellcore level II.
Kind regards
-
The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation. I can't do this because even when you type the parental email address in the password recovery, it does not recognize because because it is inactive. I need a Windows Live technician to reactivate the account and I don't know if I should put the email address of the account here for security reasons. My other question is also if you can't reactivate can you switch parental permissions to another account.
-Thanks, MichaelHello
What version of the Windows operating system is installed on your computer?
I suggest you to refer to the following article in the Xbox and check if it helps.
Xbox LIVE connection issues:
http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in
If the steps in the section of the Xbox did not help, then it would be better to post the same question in the Windows Live ID portal and forum Xbox to get help. We have a dedicated team to help you with questions of this type.
Windows Live ID Portal: http://www.windowslivehelp.com/product.aspx?ProductID=10
Forums Xbox: http://forums.xbox.com/
Hope the information is useful.
-
This license to use for the banks of the device Indian co
If the Bank is already a licensee for Windows now this license should be used for the renewal. (Indian co-operative bank)
Volume Licensing is the solution for organizations who would like to keep their PC fleet up-to-date with the latest Microsoft Software. such as Windows and Microsoft Office.
-
Which card to use for the backup of Win8
Windows 8 requires a minimum of 32 GB card to use for the backup. I bought a PNY 32 GB (http://www3.pny.com/32GB-Pro-Elite-Series-Hi-Speed-SDHC-Class-10-UHS-1---35MBs-233X-P3122C442.aspx ), but it wouldn't work. Even though it says 32 GB it is actually a little less. If I buy a 32 GB SanDisk will, that I meet the same problem? Exactly what the size is a SanDisk 32 GB card? (http://www.sandisk.com/products/memory-cards/sd/standard-class4/?capacity=32GB)
Thank you
Ed P2
any card 32 GB will be less than 32GB after it is formatted to be used in a computer. It is a standard for all types of storage.
If you need 32 GB of actual useful storage space, you will have to get a 64 GB card.
-
What type of glass or plastic is used for the lens of the camera
What type of glass or plsastic is used for the protection of camera lens?
No glass is plastic sony replay for me
-
Original title: trouble installing the drivers for my printer.
Hello
I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.
Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.
I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.
TKS
Gerard
Hi, Germain,.
This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.
See the articles for more information.
Find and install printer drivers in Windows 7
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
All,
version: 12.1.3
I am trying to create a new area where I wanted to use the same scheme used in the existing domain. It failed with the below error
com.oracle.cie.domain.security.external.ConfigSecurityException: oracle.security.opss.tools.lifecycle.LifecycleException: security of the store DB configuration error. Oracle.security.opss.tools.lifecycle.LifecycleException of exception: the SOA12C_OPSS schema is already used for the safety of the point of sale. Please create a new schema.
Is it mandatory that the scheme (creating the UCR) used in a field cannot be used for the new domain? or am I missing something? Please notify.
Thank you
Sen
That's the point... So actually you were never more than one domain using the same patterns, you have never shared patterns on different fields... You had a domain which would sometimes... Not possible in 12 c but because of OPSS more... Maybe you could just the OPSS schema duplicated, but you would always use the platform so that it was not intended to...
-
Can I use other Adobe ID instead of the Adobe ID, used for the command to install and activate the Photoshop CS6?
Thank you
Only ID authorized to use the software is the ID of the software license.
-
I have a mac with el capitan on it. This computer is not going to used for the design, but I need Acrobat 9 put on. I have Acrobat 9 on a CD, I did drag the file in my folder of the application and double-click the Acrobat pro icon, nothing happens, I'm stuck.
You must install, copy... and 9 version does not work with El Capitan
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
I am very new to the software online, please bear with me. My question is this: I want to create my own designs I want to use for the manufacture of silk scarves. I'll have to provide professional silk production houses these designs so that they can use my design patterns to create these scarves in silk for retail customers. What application Adobe should I consider, and I can get a first experimental? Thanks a lot for your help. Looking forward to your response. Best regards, Sunaura
Hello
You can try to use Illustrator or Indesign.
Desktop publishing software | Free download Adobe InDesign CC trial
Hope that helps!
Kind regards
Sheena
-
I bought the plan for photography 6 months ago and still pay every month.
but I can't use photoshop only after update. and they need to join a plan.
How can I do?
I can only use for the same test version that I pay every month.
Hi yejik42305752,
Please see the following article: https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Kind regards
Tanuj
-
Liquid markup - how to use (for the rest of us)?
I read a lot of things in the developer section BC liquid. Clearly for the programmers out there, it's like plain English what she gets. However, for the rest of us, designers and our customers, there are large gaps in the way it is presented. It assumes that we have a basic understanding of the functions on the server side and on the side of customer calls. I would say it seems intense collaboration between the province of British Colombia and the "expert" group of advisers in the liquid application with BC is ahead of the rest of the customers of BC scratching their heads.
What seems to be missing is the step by step guides that BC developed for its previous syntax, with examples for each module, even examples of HTML work. And does not suggest that it subscribes to a course of Liquid by a third party. BC made the changes, and I'm expecting BC to provide the best documentation, guides, and tutorials.
For example, after reading and re-reading the liquid documentation BC (for developers) I googled liquid to see if anyone had made any sense it to '' the rest of us. '' I came across a tutorial (Infinite business catalyst product detail Layouts |) Joe Watkins | Adobe Business Catalyst tutorials - tips & tricks) which explained mustache (a solution javascript much debated and turned in derision by some people in this forum; although debate reads like a pretty eyes and devoid of logic for "the rest of us"). Now before you say that moustache is not the same thing, etc. client-side's point was that it was EASY to understand. BC seems to have forgotten the "rest of us" in his excitement.
BC seems to have become more complex than ever, creating a wide gap between those who are experienced programmers and customers who wanted a simple CMS to manage their Web site. I am sure that liquid offers brilliant functional solutions, but it can be difficult to access without understanding how to use it.
However, attractive interface and functionality of Squarespace we makes you wonder what is happening on Earth at BC. You can all you like to argue about the technology behind Squarespace, but it totally works on BC in the way in which it is marketed, presented and used by the very market that BC is intended.
I hope that BC, with the release of liquid, at least with a "how to use (for the rest of us).
I can't help to wonder if the redevelopment of Colombia-British got hijacked by the developers, when he should have been hijacked by marketing initially.
Hey Simon,
Its a templating language and the programming language basic, must never anything the customer needs to see, touch or concern. We have been running the stuff of bedbugs in brass on the liquid for a few months and I know the sandpile a running as well things - I think that say there are a lot of people happy and I have not seen a case of head scratching total with everyone. Some people of course, but you must also be aware that liquid is not final, it isn't here for all sites and developers forum is above all the work to ensure that it has the features he needs, his work at 100% and ready for prime time. With this documentation is largely up to date in many areas and guides etc will.
You have all these:
And the ready reference information and existing code snippets in - the Developer Reference
But like I said, its not direct things yet if are still ongoing, evolving and updated.
In terms of saying moustache - it is pretty much the same language in many ways - much the creation of models of language are.
In terms of BC - they tried the simple way, they went with Muse, they did more with the ice, the more simple things - BC has not progressed and lost big BC partners etc. Dreamweaver saw what he removed from the main application and so on. BC needs to move forward and this is the real way forward, must pick up digital agencies, many sites of coherent long-term based on the platform so that it can develop. Of course, Squarespace has a nice interface in version 7, but have you used? VERY limiting, your will not build sites Web tailored to your customers that meet the needs of their online business can grow.
But yes, what your ask Simon, is already past and you have to remember the liquid is NOT yet final.
-
What vmnic driver to use for the spine of 10g
Hi any recommendation on what vmnic driver to use for the virtual machine if I have a spine of 10g? I use Vcentre 4.1 U2
Hello.
This will depend on the guest OS, but if you just want pure performance then VMXNET 3 would be the one to try. Also check out the kb VMware "choose one network adapter for your virtual machine.
Good luck!
Maybe you are looking for
-
all of a sudden all the gmail in very small print pages
Firefox is rendered pages gmail in lowercase characters. The background image is not affected. Text and zoom Firefox and Gmail settings have no effect. Other sites Web is not affected. Internet Explorer is not having this problem with gmail. Can not
-
Satellite A100 does not illuminate
When I press the power button the orange battery light flashes but nothing happens.It worked fine until he slid my knees yesterday. He has not hit the ground because I caught, but now it will not work.I wonder if the battery or the charger may be dam
-
DirectX problem - cannot install Directx 9
Just re-installed windows 7 because I got a new material and had some driver compatibility issues. I play a game that requires DirectX 9, so I went to http://www.microsoft.com/en-us/download/details.aspx?id=35 and downloaded, but it won't install - s
-
How to find my document is saved as a project?
HelloI generally save my new documents as drafts before finishing them and publish them to the community. Where can I find my project without the exact URL documents? I lost a few drafts before I learned to keep the URL, so I was able to locate the d
-
Cannot install Lightroom on my new laptop Windows 10
I go so far as to fill out the "Installer initializing" progress bar but the window disappears and nothing more. I tried the compatibility for Windows 8 and 7 mode with no luck