Programatically assign button comfort - is it possible?

Similar Questions

• ASSIGNABLE button 6 doesn't seem to work.

  I tried to affect 'assignable button 6' to 'steadyshot' on my FS7, but it doesn't seem to work.

  Countermeasures that I tried:
  Thinking that I might need to reboot the camera, I have it turned on and then turning off. I also tried to unplug and re - connect my connection the handlegrip LANC and swapping of lenses (all the Sony E-mount). I also tried other functions as peaking to assinging but no matter how hard or soft how I push the number 6, he's as dead as a dodo.

  Has anyone else had this problem or is there something that I'm not just doing?

  Sorry everyone. I'm afraid that the culprit was myself. I expected a menu pop up and did not notice that the icon has been change to reflect the State.

  Therefore, the button works very well - it was my brain and eyes (I didn't put my glasses on!) which were defective.

• Add salary on the form of assignment button

  Hi, hopefully an easy question...
  
  I created a new responsibility that the form of the person and on this form he assignment button, once on the form of assignment, I added the button to pay. in the definition of workflow, I used the SALREVIEW node that uses the launch of the Administration of treatment Page. I thought that everything was set up correctly, but I must be missing something... when I click on the pay button, I get an error box indicating "feature is not available to this responsibility... ».
  
  Thanks for any help

  Dear Sir

  You must add this function that in which you are faced with the question of responsibility.

  Add SAL_ADMIN_LAUNCH this function

• Chapters you can assign buttons automatically?

  I turn and go up marriages. All my projects are very similar, but I can't seem to create a model of the still with the same menus and titles. But is it possible to have yet to detect the chapters that I've already put on the timeline and automatically assign to all buttons. After all, the menus are named cronologically 1-4 (or 5) and all the buttons are in order, but I select each button and assign a chapter that takes time.

  Fairly limited, but try the chapter index option.

  http://help.Adobe.com/en_US/Encore/CS/using/WS185296FB-D1BB-4D52-ABC4-316DF795FD05.html

• Sculpt ergonomic mouse - how to assign buttons to tilt left/right wheel?

  Hello

  I just got the new MS sculpt ergonomic mice and the latest Microsoft Mouse and keyboard Center, and there is no way to assign the wheel of the mouse to the left or right tilt click.  This feature is clearly demonstrated in the marketing of the device but there is no way to assign it, nor it does nothing by default.
  Then... How are you?
  Thank you
  Roman

  I managed to make the Sculpt ergonomic mouse scrolling horizontally in Excel by using a third-party driver.

  I use X-Mouse button control (XMBC) for years already with my previous mouse, because it helped me:

  • to remap double click on the middle button and
  • to make windows scroll the window that the pointer is positioned on.

  I now remapped 'Tilt Wheel left/right' to "scrolling window left/right", and it works perfectly.

  Next step: try to remap the Windows key. No luck so far.

  

• Optical 5 buttons-comfort mouse

  I have a new HP comfort optical 5 buttons mouse, but I can't install the drivers I downloaded from the hp site.

  I get an error no. 1401. My operating system is Windows Vista.

  How can I install the software please?

  Thank you

  Hello

  OK, I'll try that.

  Thanks for the reply

• IntelliMouse Optical assign buttons

  Win7 64 bit.  I downloaded the driver, but the list for the right button function has more a key option "escape".  Nobody knows why they got rid of this?  It is very useful in the Autocad environment

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the model number of mouse Intellimouse?

  2 did you do changes on the computer before the show?

  You can try the steps listed in the article mentioned below and check if it works.

  Assign the macro or function to your mouse buttons

  http://support.Microsoft.com/kb/258892

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Broken E320 trackpoint scroll button. Is it possible to get a replacement?

  In a rushed situation, by removing the laptop keyboard to clean, I removed the Middle above the trackpad button, making it break. My question is simple. Is it possible to buy a replacement just this button or do I have to buy a new keyboard/get what he maintained.

  I pulled a little too hard and broke down at the bottom plastic. I guess I'll have to consider getting a new keyboard to get their hands on this button (or just live with it).

• Helps the assignment buttons that control video clips

  I'm pretty new to flash and my teacher gave us an assignment with little help or tutorials.

  He wants us to create a SWF file that has a House and it is the front yard and two buttons.

  A button that says who says the sunset and Sunrise.

  When I push the button of the Sunrise, the Sun must rise above the House and stay there.  When I push the button to sleep the Sun, it must set - and then a UFO must land on the lawn.

  
  So I think I have a pretty good understanding about the assignment, but the actionscript code is shake me up.  How do I make buttons that will control the video for sun to stay mounted above the House and then set?  The UFO is a whole new question.   The button of the Sun should make Sun down and then a UFO land on the lawn.

  Please help explain/link me to the good tutorials.   One thing that worries me is that the Sun will be mounted - and then stay on top of the House, even if I click on the button of the sunset.

  Your help is greatly appreciated.

  You should talk to your professor or classmates about of what you already know of your lessons which would allow you to do these tasks.  The risk you run in seeking help as it becomes a solution that your teacher would never expect to have knowledge of, one that you could never explain how it works... which can be detrimental to your teacher you coast.

• A "back" button on history is possible?

  I know that Captivate has treasures without papers or should I say very imaginative solutions for those in the know; but I think this might be one of the exceptions.

  I would like to know if there is a way to have a button with several "BACK" option [you know, the last slide visited, the last slide visited before... and that... and that]... as a previous browser (history) button?

  Unfortunately not.  (It is another area where the script beats Captivate).

  Go to slide previous action stores only a stage of history.  If you were hoping for more, you need to create some sophisticated advanced Actions. But as shares of Captivate advances don't really gives you the opportunity to create tables, you must create several user variables to contain the slide numbers and it would be quite difficult to manage.

  If you are a hand dab to JavaScript, this would probably be a better option.

  I also encourage you to connect with an enhancement to this feature request.  It has long been.

• Is it possible to save a part of the data from when you press a button 'save '?

  Hello

  The attached vi below acquires data from a sensor. The signal of the sensor output can be set to zero and the data stored in a file. However, the saved data includes the portion of data when vi starts to run until you press the stop"" button. Is it possible to save the data game from when 'save' button until the button "stop"?

  Best regards

  Ninjatovitch

  This should be at 8.2

• Is it possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Problem - one of my clients recently tested my new LabVIEW application and asked how the arrested LabVIEW application can be restarted without clicking on the "Run" (right arrow) button.

  Is possible solution - possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Thank you!

  Barry

  The big problem is in your Acquistion to stop audio event. You run the LabVIEW stop sign which is the equivalent of hitting the Cancel button in the toolbar.  (See contextual help on that).  You can stop the acquisition, but you don't want to stop your LabVIEW program.  You need this case in the event your computer to transition state in a sleep mode when you do not make any purchase.  Then hit the purchase button to start again transitions the machine state in the acquisition.

  In your case of program output, you want really to leave LabVIEW it.  You want to run and stop commands like closing the com port and one of these activeX references.  Then allow it to stop the while loop.  Turn the LabVIEW out outside the loop so that once everything is cleaned, your application may close.  You probably want to wrap this command in a case structure so that if you are in the execution environment, it leaves your application.  But if you are in the development environment, you don't want to cause your LabVIEW environment stop.  Another thing is that right now, you actually have a race condition in the Exit event.  The com port will close first or LabVIEW will come out.  There is no defined order of execution.

  Alternatively, you can have an event to close panel? in this way, you haven't accidentally short circuit all your program by pressing the X key.  You want to capture this event, discard it.  And if you want to not actually closed, did trigger the Exit Program button so that you can gracefully shutdown.

• Is it possible to have the search field input in the toolbar without going through the search button in RoboHelp 10?

  I would just have the toolbar and not the extra button.  Is this possible?

  Thank you!

  I guess one way would involve creating a tiny 1 pixel by 1 pixel transparent image and replace the image search.

  See you soon... Rick

• Is radio buttons - possible to select multiple boxes?

  Hey people,

  If I have a group of option buttons 10, is it possible to make them instead of a box, that EVERYTHING 2 boxes in this group can be selected?

  If not, does anyone know how to do this by using the check boxes, or similar?

  I use Acrobat Pro 9.

  See you soon.

  You can't do that with radio buttons (at least you don't really want to), but you can with boxes, as shown in the following demonstration PDF: https://workspaces.acrobat.com/?d=j-aUbc3YTz1uu8Jx0LvzHg

  Study of the function at the level of the document that is called in each of the Mouse Up event checkbox to see how it works.

• To make the location field fill empty when you create a new assignment

  Hi all

  I have a requirement to customize the form of assignment.

  Whenever develops a new employee and the assignment button is selected to go to the form of assignment, a default assignment is created for the new employee with a default organization and location. The requirement is not to fill the site with the default and keep it empty.

  I understand that the location that is labeled to the default organization is filled on the default assignment form. Is it possible using customization of the form where I can achieve.

  Kind regards

  I guess you should be able to achieve this by using the customization of forms, but you must select the correct triggering event to achieve. In a TIMES-NEW-ITEM - INSTANCE of the item ASSGT. Status of the ASSGT. LOCATION_CODE with a NULL value.

  This is because, according to the movement of the cursor/insertion sign, I could see that the STATUS is the next item to be created after the LOCATION. So we do not know how the data is dtermined in LOCATION_CODE. In order to better clean this value after it was created.

  Kind regards

  Stephanie.