Sculpt ergonomic mouse - how to assign buttons to tilt left/right wheel?

Similar Questions

• is there a single mouse driver to carve microsoft ergonomic mouse? The "Mouse and keyboard Centre 2.3" driver/software is not compatible with my other keyboard...

  Hello!

  So I went on the microsoft Web site to download the software/driver for my "Microsoft sculpt ergonomic mouse", but is the only driver/software they listed the "mouse and keyboard Centre 2.3", which seems to be for their mouse and keyboard...» I tried to install, but after installation than my other brand non-microsoft (mark i-rocks) 2.4 ghz wireless keyboard Connect is more to his receiver and I am unable to use the keyboard. I tried resynciing and everything but nothing works only as long as this "keyboard and mouse center 2.3" driver/software is installed, so now I have to uninstall that and just use the regular driver for the "microsoft sculpt ergonomic mouse" I have, so I can use my keyboard...

  I want to know, is there another older version of mouse only driver/software that I can use with my "ms sculpt ergonomic mosue?  Maybe the latest intellipoint mouse driver would work? What is the latest version and how to find?    or only the "keyboard and mouse Center 2.3" works with this mouse?  so in this case, I have no other choice than to use the generic mouse driver?

  Thanks in advance for the help!

  lendbz

  I finally thought to it. Apparently, when you install the software/driver "Mouse and keyboard Centre 2.3" for the "mouse sculpt ergonomic microsoft", it will install both the driver for mouse and keyboard correspondence pilot as well, even if I only have the keyboard.  I tried this software even with my old microsoft natural wireless laser mouse 7000 and time that he installed only the mouse driver. I'm guessing that the nano-receiver for the mouse ergonomic sculpt can receive both the ergonomic keyboard and ergonomic mouse? .

  If the software installed one "microsoft USB dual receiver Wireless Mouse" under "Mice and other pointing device" in the Device Manager and a "receiver double USB microsoft wireless keyboard' under 'keyboard '.  What I did is simply to go into the Device Manager and uninstalled the driver "microsoft USB receiver double wireless keyboard" and check the box to "delete the driver for this device" so that the keyboard driver will not return and be a pilot and leave just installed microsoft mouse, so now I don't have that the "microsoft USB dual receiver Wireless Mouse" and the generic driver keyboard "HID Keyboard Device" in Device Manager to the the microsoft place unwanted, one, now I can go ahead and install any brand wireless/wired keyboard and the microsoft keyboard driver no longer interfere with it.

• L5V-00001 Sculpt ergonomic keyboard mouse with KVM and Wireless Office

  Transmitter/receiver plugs directly into the PC, the keyboard and mouse both work very well.

  When the transmitter/receiver plugs into the USB port on the KVM switch, only works for keyboard, the mouse seems dead, but gives PC meet the win button (blue button) on the mouse.

  I have to use KVM in my env work and also really want to use Sculpt costume

  so please help me what KVM switch could support L5V - 00001 Sculpt ergonomic Wireless Desktop

  Hello

  Please contact Microsoft Community.

  I want to tell you that the KVM are you using currently has a problem. All KVM switches generally support the mouse model you mentioned...

  So, you can contact the KVM manufacturer in this regard. Or you can use your favorite search engine to buy a new one.

  Note:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• How to make text disappear when the mouse is over a button?

  Hello, I'm completely new to Flash, and well I need help. I created a page that contains static text in the Center.

  Page has buttons on the side and when I rollover a button text is displayed, but the problem is that when I rollover a button, static text in the Center is here and I want to hide as I can't read anything either because the texts are overlapping.

  How can I make the text in the centre disappear / hide when I rollover a button and how do I make it reappear when the mouse is the off button?

  I hope what I said makes sense.

  You can assign the code onRollOver and onRollOut buttons to the dispappear of text, but you will need make the text a movieclip with instance name that you can use to target to make it invisible.  In the example below, the button has an instance name of "btn" and the movieclip of text has an instance name of "text_mc".

  btn.onRollOver = function() {}

  text_mc._visible = false;

  }

  btn.onRollOut = function() {}

  text_mc._visible = true;

  }

• How to enable vertical and horizontal scrolling with sculpt Touch Mouse (W7-64). When I activate horizontal disables vertical scrolling to scroll.

  Load the IntelliPoint software that is more recent, although she did not recover that (!). Scrolling works when you use the Synaptics Touchpad.

  When I turn on all the other functions in the IntelliPoint vertical scrolling is disabled.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
  The description of the question, I understand that you can not use horizontal and vertical scrolling with sculpt the touch mouse.
  Let me go ahead and help you with the issue.
   
  As you have been told that the IntelliPoint software is updated, but sometimes Sculpt mouse drivers may be outdated which causes this problem.
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  I suggest for the link and follow the steps in the article:
  Install IntelliPoint software and the mouse
  http://support.Microsoft.com/kb/258785#top
   
  Method 2:
  Download and install the drivers from the link:
  http://www.Microsoft.com/hardware/en-in/d/sculpt-touch-mouse
   
  See also:
  http://www.Microsoft.com/hardware/en-in/help/support/how-to/mouse/use-sculpt-touch-mouse
   
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Microsoft sculpt mouse - how to disable vibrations

  How can I turn off the vibration of the "scroll band" on the mouse to carve Microsoft in Windows 8?

  Thank you...
  Brian

  Garak salvation,

  The Sculpt mouse has a built-in vibration function.

  I suggest that allows you to check the settings of the application, using the application settings to disable the vibration might be possible.

  Please take a look at the screenshot below:

  

  I suggest you to download mouse and keyboard Center to get the most out of Windows 8

  You can also check this link:

  http://www.Microsoft.com/hardware/en-in/help/Windows-8/How-to/mouse/use-sculpt-touch-mouse

  Please let us know if you need help on this problem or any questions related to the window.

• How to assign URLs dynamically using button/link on the page of peoplesoft? Please provide detailed instructions.

  How to assign URLs dynamically using button/link on the page of peoplesoft? Please provide detailed instructions.

  1. define the URL, the Z_URL1 or the Z_URL2 definitions

  2. in the change of field button:

  If true Condition then

  ViewURL (URL. Z_URL1);

  On the other

  ViewURL (URL. Z_URL2);

  End - if

• can not find how to run Sculpt comfort mouse on Windows 7, no option bluetooth not found

  I'm running in circles.  Control Panel does not appear to have a bluetooth option.

  Try to find the drivers to download?  thought this would be a wink

  Hello

  Thank you for giving us the opportunity to help you on the forum.

  I want to suggest to go through the link provided below where you can get the drivers, tutorial in PDF format and all important information about the comfort mouse sculpt.

  http://www.Microsoft.com/hardware/en-us/d/sculpt-comfort-mouse

  Note: Make sure that you download the correct version of the drivers from the links provided. If it's 32-bit then you must download the same version, or if you have 64 -bit , you will need to download the same.

  Try to follow the steps given in the following link to check what version of the operating system that you are using.

  My PC running the 32-bit version or 64-bit Windows?

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows.

  Kind regards.

• Re: Satellite T130-15F left and right mouse buttons both work as right click

  We have a Toshiba Satellite Pro T130-15F which presents a strange problem when any user logs on to the laptop and they try and use the left button of the mouse on the laptop it works like the right mouse button, if the laptop is not a left mouse button to work as a left and right work as right button.

  I tried to rebuild the laptop several times I tried also to restore the bios default settings, I would be very grateful if anyone has any ideas on this.

  Thank you

  Peter

  > When a user logs on to the laptop and they try and use the left button of the mouse on the laptop it works like the right mouse button.

  You can connect the usb mouse to check how it will act? If the usb mouse works properly, it may be malfunction of touchpad.

• ASSIGNABLE button 6 doesn't seem to work.

  I tried to affect 'assignable button 6' to 'steadyshot' on my FS7, but it doesn't seem to work.

  Countermeasures that I tried:
  Thinking that I might need to reboot the camera, I have it turned on and then turning off. I also tried to unplug and re - connect my connection the handlegrip LANC and swapping of lenses (all the Sony E-mount). I also tried other functions as peaking to assinging but no matter how hard or soft how I push the number 6, he's as dead as a dodo.

  Has anyone else had this problem or is there something that I'm not just doing?

  Sorry everyone. I'm afraid that the culprit was myself. I expected a menu pop up and did not notice that the icon has been change to reflect the State.

  Therefore, the button works very well - it was my brain and eyes (I didn't put my glasses on!) which were defective.

• Compatibility Microsoft Sculpt ergonomic desktop with Linux

  Hello!!!

  I intend to buy the whole Microsoft Sculpt ergonomic desktop (keyboard and mouse) and I wonder if it is compatible with the Linux operating systems.

  I tried to find an answer online and did not...

  Thank you!

  Hello

  Welcome to the Microsoft community.

  Under the "features" chapter from "Microsoft Sculpt ergonomic office compatibility ' Linux is not listed. We don't have the keyboard in Linux compatibility information.

  https://www.Microsoft.com/accessories/en-us/products/keyboards/sculpt-ergonomic-desktop/L5V-00001#specsColumns-OS

  Kind regards

• How to assign the TAB sequence?

  Hey...

  Can someone tell me how to assign tab...? I mean if I have a few buttons and controls on the front panel are trying to view the login Panel; whenever I press TAB on the keyboard, I want that the selection of buttons & controls should be in order... Can someone tell me how...?

  See the order of Edit\Tabbing, and with the right button on the control of Navigation Advanced\Key

  See you soon!

• Sculpt Comfort mouse

  I have a comfort sculpt mouse and it worked amazingly 1 month.

  https://www.Microsoft.com/hardware/en-us/p/sculpt-comfort-mouse

  It suddenly started to not recognize my finger when I switched it on tactile browser functionality (previous / next),

  and now it's random answer and activate the function back without even touching.

  I am browsing, but it is suddenly decides to go back on its own...

  This faliure continued even after the touch features have been disabled by using the keyboard and the mouse Center.

  is anyone know something about this phenomenon?

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the below the Microsoft Help article:

  How can I use my touch mouse sculpt?

  http://www.Microsoft.com/hardware/en-us/help/support/how-to/mouse/use-sculpt-touch-mouse

  Also, try the procedure described in the following Microsoft article and check.

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/mouse/wireless-Bluetooth

  I suggest you to refer to the troubleshooting section on here -http://www.microsoft.com/hardware/en-us/support/troubleshooting

  If nothing helps then contact the material from Microsoft supports the link below:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Back to us for problems with Windows. We will be happy to help you.

• Sculpt ergonomic keyboard does more - batteries becomes extremely hot...

  I have a Sculpt ergonomic keyboard which also comes with a mouse and a keyboard. I only used it for about 3 months. The batteries in the keyboard run out in a few days and I have to replace them very often. This morning the keyboard doesn't quite work. The keyboard and the mouse still work. The batteries become very, very hot and I took now them. Even when I change the batteries in the keyboard does not work at all (I have replaced twice now) and the new batteries heat up less than a minute, so hot I can't touch them. What could be the problem?

  Hello Geriannede,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because the parameters or corrupt device drivers.

  I suggest you run the hardware and devices Troubleshooter and check if that helps. Please follow these steps:

  a. press Windows + C keys and click on Search.
  b. type Troubleshooting in the search box and click on it in the search results.
  c. click 'show all' and then click 'hardware and devices'.
  d. click on 'Next' and follow the on-screen instructions.

  Please also this link keyboard driver update and verify.
  Reference:
  http://www.Microsoft.com/hardware/en-us/d/sculpt-ergonomic-keyboard-for-business

  Additional information:
  http://www.Microsoft.com/hardware/en-us/help/Windows-8/troubleshooting/keyboard/using-keyboard

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How to assign the value to the application-level element

  Hello

  I'm learning to APEX.  I use version 4.2.6.

  My question is, I set a text field called 'FINANCIAL_YEAR' in the login page.  I wanted to know how to assign this value to a text element of Application level (on page sent), so that I can get this value through at my request.

  Thank you

  -Anand

  anand_gp wrote:

  Yes, I created a 'text area' under 'HTML' in the 'Home' page  Who accepts the exercise of a table through LOV.  I intend to assign this value to a global variable so that this variable can be read in any of the application to filter the result set from different tables (not yet built the rest of the application).  To do this, I was intending to use "Shared components"-> "Elements of Application".  I'm still not quite sure how it works.

  Start by reading the documentation on elements of application.

  Go to the shared components > Application parts and create your G_FINANCIAL_YEAR item. Value Session State Protection Restricted - can not be set the browser so that the value is not editable by the user, falsification of URLS or scripts.

  On the home page, if there is not already a button to submit the value of the fiscal year, add one in the HTML area, with the Action as a submit Pageclick. Otherwise, you can do without the button and using submit Page in Page Action when the changed value select the parameter in the list so he can undergo.

  Then, in the section of the Page processing, create a calculation:

  Point Type: Application-level element

  Calculate Item: Application: G_FINANCIAL_YEAR

  Point calculation: After submit

  Type of calculation: Value of the element

  Calculation:

  Run the application, select a value in the list of the fiscal year and submit the page. Review of current session state in the viewer of session state by clicking on the link of Session in the toolbar developer. Select the Elements of Application in the view list, and then click set. The element of your application and its current value must be visible. You can now reference value throughout your application by using the appropriate syntax.

  You should also consider if a default value (for example the current year) using a calculation Application from the point of calculation on the new Instance and coordinate the application point and part of the homepage using point application as the Source of value or an expression with Source page element, the value always, replacement of value that exists in the session state.