Programmatic checking for the presence of sbRIO in the network

Similar Questions

• Windows cannot check for the error code 80070424 updates.

  I have windows vista premium x 64
  Windows Update stopped working and when I they do it manually it says windows cannot check for the error code 80070424 updates.
  I searched everywhere for an answer... Please help

  ----

• How to check for the two first digits?

  Can someone please... There is demand to have a hidden field on the form that will be filled with data. It's going to be 6 digits long and could start with 02 or 04. I need to check on the DocReady event, for the first two digits. If the first two digits are 02, the presentation of the form will remain as it is. If the first two numbers are 04, I'll have to show two hidden subforms. Can someone please provide an explanation on how to check for the first two digits of field 6 digits and do some actions.

  Thank you very much

  No, only in the event: Exchange.

• restore service dependency for the network and sharing Center

  How to restore the dependency service or group who couldn't start for network and sharing Center?

  Hi patto1708,

  If it was something that was already previously and failed after certain activities on the computer for which you are not aware of, then the best possible thing to do is run a system restore. This will ensure that your computer is back to operational status.

  For more information about the system restore, you can see the link: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  Or you may need to check for the dependency of the network and sharing center services and start them manually when they are stopped manually.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Manage-services-in-Windows-Vista-from-Windows-Vista-Inside-Out to learn more about how to manage services in Windows Vista

  Kind regards

  SAP U G - Microsoft Support

• ' Error' the settings saved on this computer for the network do not match the requirements of the network "while trying to connect to the wireless network

  Title: Cannot get an Internet connection!

  Connection Wi - Fi comes with a warning that 'the settings saved on this computer for the network do not match the requirements of the network"what should I do to get a connection?

  Hello

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you follow the steps to run the troubleshooter from the
  link and check if the problem persists.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Method 2: I also suggest you to follow the steps from the link and check if it helps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3: Follow the steps below to remove and add the wireless network.
  (a) click Start and select Panel.
  (b) select network and sharing Center and manage the networks without wire (on the left).
  (c) in the list, click on your network and Remove top.
  (d) you can then search for available wireless networks again and reconnect it to your network.
   
  Hope this information helps.

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• 'the settings saved on this computer for the network do not match the requirements of the network.

  original title: securtity settings in my computers. where should I go and see what are my security settings?

  the settings saved on this computer for the network do not match the requirements of the network.

  where should I go and see the settings?

  Hello Arturito1,

  Thanks for posting in the Microsoft Answers forum! For assistance with your question, I would recommend that you follow the steps provided by Srinivas R in the thread below:

  http://social.answers.Microsoft.com/forums/en/vistanetworking/thread/a82432f2-9312-480A-b2ea-720033c73387

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Check for the presence of malware

  How can I check for viruses/malware on my iMac with OS X El Capitan

  Go to http://www.etresoft.com/etrecheck , download and run EtreCheck, copy paste here the status report.  If there is any malware/adware on your system, it will appear, and then we'll tell you how to dispose of it here.

• I also get the error code 80070005 when you try to use Windows Update to check for the updates

  I get this error code as soon as I try to check updates. It does not even say there are updates tells me to enable updates, but when I try it gives the code. I used Microsoft Fix and now it says everything is fixed and ok but it is not. So now what?

  Hello

  1. what Microsoft fixit did you run?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Note: When you perform a virus scan Malware, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• How to bulk to check for the import?

  I'm new to LR and am importing photographs from a master file disk.  Is there a way to bulk select for import, without using the audit of all the / check option no or checking them one at a time?  For example, I want to import 100 to 200 photos in a folder.  How can I bulk check the 100 without having to do them one at a time? I would normally expect a selected choice of context for "check images", but I don't see that anywhere.

  Select the first. SHIFT selects the last. Hit the SPACEBAR to check all the.

• Check for the existing index

  I'm a DBA working with 3 application developers, they want to know how to check for existing indexes for some columns
  in a table in their schema.
  
  a friend told me to check the existing index for some column you have to query
  view dba_ind_columns so you must be a sysdba user
  
  but I don't want to give the developers of the application of the privilege sysdba
  
  but my friend told me, to avoid sysdba grant for application developers, they can query the user_indexes view in their scheme, but after watching the user_indexes view,.
  
  It gives me a lot of data but does not give me the NAME of COLUMN
  
  How can I solve this problem, which is:
  
  Let application developers check existing indexes for some columns in their schema without granting them sysdba privilege.

  user_ind_columns

• Check for the empty table row before adding the date

  On the form below, when I click on the green button (extreme right) plus a new row in the table is created with today's date. the user can then enter more text to the right of the date. Problem is when the form is saved and reopened, the text that the user entered is removed and today new is added because it is in the intialize event. How do I script to check and make sure that each dated line is empty before you add today's date?

  https://Acrobat.com/#d=qTINfyoXA-U6cDxOGgcSEw

  Thank you

  ~ Gift

  Hi Don,

  One possibility would be to use the box caption of the textfield for the date and leave the value part free for the user to enter their data:

  if (xfa.resolveNode("this.caption.value.#text").value === "") {
            this.caption.value.text = util.printd("[mm/dd/yy] ", new Date() );
  }
  

  See here: https://acrobat.com/#d=VjJ-YsXLKmV6QU84JrAAIw.

  Hope that helps,

  Niall

• How to check for the application ID in a function of connection?

  Hello
  
  I have a connection procedure which is something like this:
  

  wwv_flow_custom_auth_std.login(
      P_UNAME       => :P58_USERNAME,
      P_PASSWORD    => :P58_PASSWORD,
      P_SESSION_ID  => v('APP_SESSION'),
      P_FLOW_PAGE   => :APP_ID||':15'
      );

  And the authentication procedure is this:
  

  create or replace
  FUNCTION  "ACL_CUSTOM_AUTH" (
      p_username IN VARCHAR2,
      p_password IN VARCHAR2
      )
  RETURN BOOLEAN IS
  BEGIN
    FOR c1 IN (SELECT 1 
                FROM acl_employees
               WHERE upper(userid) = upper(p_username)
                 AND mot_de_passe = p_password)
    LOOP
      RETURN TRUE;
    END LOOP;
    RETURN FALSE;
  END;

  I want to check for an application in the acl_employees table ID, because I want to check if this user is credited for THIS specific APP_ID, adding a following kind of code to the function of authentication:

  AND application_id = :app_id)

  The problem is that the connection API takes in charge only two parameters for custom authentication: user name and password. How can I switch the APP_ID to authentication?
  
  Thank you for your help.
  
  Christian
  
  Published by: France Christian February 23, 2010 06:23
  
  Published by: France Christian February 23, 2010 06:24

  It is sometimes easier to check the user before calling the connection custom Apex then past just a password to NULL to the connection works if the check fails. Something like that before the connection:

  DECLARE
  v_dummy NUMBER;
  BEGIN
  SELECT 1
  INTO v_dummy
  FROM acl_employees
  WHERE upper(userid) = upper(p_username)
  AND application_id = :app_id;
  EXCEPTION WHEN NO_DATA_FOUND THEN :P58_PASSWORD := NULL;
  END;
  

• check for the delete operation

  Hi all
  
  I'm a deletion of a table. How can I check if the removal of deleted rows?
  
  Thanks in advance
  BN

  I'm guessing that you want to check SQL ROWCOUNT % immediately after the DELETE statement (if you are not in a PL/SQL block when you issue DELETE it, your API client probably has a different appeal for this information).

  BEGIN
    DELETE FROM some_table
     WHERE some_column = some_value;
  
    IF( SQL%ROWCOUNT = 0 )
    THEN
      dbms_output.put_line( 'No rows were deleted' );
    ELSE
      dbms_output.put_line( 'We deleted some rows' );
    END IF;
  END;
  

  Justin

• Check for the required amount - point application

  Hello
  
  During the creation of point of Application, we get a drop down menu where we have to choose
  
  1 check sum required - Application level
  2 check amount required - user level
  3. check sum require - Session survey
  
  
  I'm creating an application-level element that allows to store USER_ID and ACCESS_LEVEL using the query
  «SELECT USER_ID, ACCESS_LEVEL IN FX_UID, FX_ACCESS_LEVEL FROM USERS WHERE UPPER (EMAIL_ID) =: APP_USER.»
  
  My question is what is the function of each of them and that will be suitable for the review above the request in the light of these values are used in the authorization of the page. If Access_level = 3, all pages are made available where as if Access_level is 1 then only read_only is enabled for the user.
  
  
  Thank you
  Shijesh

  OK, now I see what you were saying before. Then use this setting that I have described, and that should be all you need. Furthermore, your statement "select into" must reference the elements of the application as a bind variable.

  Scott