Programmatically change the name of the value axis on a second value axis

Similar Questions

• How to programmatically change the z axis limits

  Could show you how to change axis limits (min and max) z programmatically in the attached VI?  It's a simple VI that uses the 3D curve.  Wouldn't be the same on x and thus value axes?  Would appreciate your ideas.  Thank you.

  Hello

  I don't have a LV 7 installed so I can't post the sorry VI... Here's the answer to your question, you must use property nodes and method in the palette of ActiveX (see screenshot), 0 is X, item 1 scale scale Y and point 2 is titled Z scale.

  

  More generally there are lots of discussions on issues of 3D graphics, just do a forum search .

  Hope this helps

• Programmatically change the chart axis interval c#

  I got mine to work, but I wanted to just make sure I do it correctly.  I only ask because I had to use the cast and hard-coded item recovery.

  This is what works for me:

  Yaxis = (AxisDouble) Graph.Axes.ElementAt AxisDouble (0);
  
  Yaxis.Range = new range(-25000, 25000);

  I put also adjuster = 'None' in XAML.

  Thank you.

  Your approach is very good. Given that you declare the axis in XAML, you can also use a name instead of referring to it in the index location:

  x:Name="Yaxis" Adjuster="None" ... />

• Cannot change the value of mousewheel scroll

  After you have reinstalled windows and all I had on my old desktop, I seem to be unable to change my amount of scrolling the mouse on firefox. I looked through all the troubleshooting questions that have already been posted, and all users have responded that I had to access about: config and change the value of mousewheel.withnokey.numlines.

  However, when you access everything: config, I discovered that not only I don't the integer specified, I don't have any integer with a preferably name that contains "withnokey", so I tried to add it in me, but not to use. Currently my parchment done on lines 6 and 7 and I would like to go down to about 3.

  Hello, Skarlath, the scrolling behavior has been overhauled in firefox 17 (see for reference https://wiki.mozilla.org/Gecko:Mouse_Wheel_Scrollingtechnical information) - the old setting longer reverberate.

  It must still be possible to set a different frame rate. You can enter about: config in the firefox address bar (confirm the message information where it appears), search preferences starting with mousewheel.default.delta_multiplier_ ..., you can double-click on these parameters and assign a different value to - then a restart of firefox is required for the changed settings is taken into account.

• Can I programmatically change the default property to create for all elements of the front panel?

  Can I programmatically change the default property to create for all elements of the front panel?

  I need to make the logout button, when click on, takes care of all the default values of my fron Panel.

  There is no way to programmatically call the functionality of an editor 'Use default' or 'Load Default'. To do it yourself, you will need to write your default values for each control explicitly in the diagram, when the user press the logout button.

• Programmatically change the selected cell/line of control multi-column listbox

  I want to programmatically change the selected cell of a multicolumn list box whose selection Mode is set to highlight the whole line.  I would use this to highlight the line whatever the list box, I chose to.  It would work the same way if the user has clicked on a line to select and highlight that particular line.  Set Active cell does not fulfill this.

  Steve

  Try to use the property value; p

• How do you programmatically set the value of an enumeration

  I would like to be able to select the value of an enumeration (programmatically).  I don't seem to be able to find a reference on how to do it.

  Thank you.

  Hummer1 wrote:

  Right... When you change the value (windows) or value property... You change it the number of the slot in the ring (1,2,3...) or the word that is in this location... (Single, double, triple...) ?

  Thank you.

  Provided that the nodes property is for a ring, you present with the value numric. The text of the ring is just a tip chart fantasy and has nothing to do with the value of the ring (no similar enums where the numbers and strings are part of the data type).

  Ben

• Is it possible to change the values of particular #define of the various controls in CVI.

  In my application, I have different panels to file single .uir. When I save the .uir file, I get the same values of #define for different controls in different panels. For this reason, I am not able to use these #defines block switch. Is it possible to change the values of #define according to my condition.

  Hi, a little more Wolfgang post. It is the combination of the Panel to manage and control the unique ID: as you know, you can load the same panel more than once, so even if you recover the full chain of PANEL_CONTROL you have duplication. items that exactly identifies a particular control in a particular group are the combination control panel manage AND panel_control ID.

  On the one hand which guarantees more flexibility to your application, you can design only a few panels and reuse them whenever you want, even having some of them loded several times in the same instant. On the other hand, as you have discovered, there is the possibility (Finally, almost certain) duplicated in your app ID.

  To resolve the problem of duplicated IDS you can act in two ways:

  1. If you know that no Panel is never loaded several timer in your application, you can retrieve the name of constant of Panel with GetPanelAttribute (panelHandle, ATTR_CONSTANT_NAME, string); and to distinguish between the name of constant, then switch between control ID

  2. If you happen to have duplicate panels you will need to store each panelHandles in the non-volatile variables, switch between them and then switch between the control ID

  An alternative might be to use Panel callbackData attribute and assign a significant value during the loading of the Panel, other callbackData finally from a control ID. Something like this:

  Loading panels:

  panelHandle = LoadPanel (0, "myfile.uir", PANEL1);

  SetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, (void *) 1);   Assign different callbackData in each instance

  During the failover between controls:

  void * cbkd;

  GetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, &cbkd);)
  Switch (cbkd (int)) {}
  case 1: / / elements of the PANEL1
  switch (command) {}
  case PANEL1_NUMERIC:

  your code here
  break;
  case PANEL1_STRING:
  your code here
  break;
  }
  break;
  case 2:
  // .....
  break;
  }

  One final note: it seems to me that all this is necessary in a very limited situation, where you have the same callback called on various panels/controls. Whenever the reminder is unique to a specific panel or controls on a single panel you don't need to work that way.

• Change the values of the cluster in while loop and in the face at the same time

  Hello.

  I have a little problem in a test program, that I'm working on. I'll try to simplify as much as possible. I have a cluster control that contains two controls A and B. I want to:

  1. switch to update the value of the command A a while loop
  2. allow the user to change the value of the B control through the face, while the loop is running

  To change the value of order in the while loop, I first get the cluster control cluster, update the value of the control for a way to group by name and finally rewrite the cluster in the cluster control.

  The problem is that if the user changes the value of the B control while control that is in the middle of the update, the new value of B control is lost because it was read before updating in the face. Is there a way to get around this?

  DennisBengs wrote:

  1. switch to update the value of the command A a while loop
  2. allow the user to change the value of the B control through the face, while the loop is running

  Then they do not belong in the same cluster.  They are disconnected obviously enough that they do not go hand in hand.

  Where it can get really complicated, it is that you're talking about the user and code changing the same cluster.  It is very dangerous and very difficult to manage.  You might be able to get there with a driving force.  But walk slightly, my friend.

• Interactive report - out has changed the value of the column selectlist

  Hello

  I try to use a selectlist in an interactive report. I used "APEX_ITEM. SELECT_LIST' for this. My interactive report request is

  SELECT APEX_ITEM.checkbox (1, CUSTOMER_ID, NULL, NULL, 'onclick = "javascript:setvalue (this.value)" ') as "-",

  CUST_FIRST_NAME,

  CUST_LAST_NAME,

  APEX_ITEM. SELECT_LIST)

  p_idx = > 2,

  p_value = > TEST.

  p_list_values = > ' Y; Y, N; NO

  ) 'test' for DEMO_CUSTOMERS

  I had a "Override" button on the page. I try to get the modified values (for the field "test") and the customer ID selected as a semicolon-separated list just by clicking on the ignore"" button. The process code on submit is

  : P8_TEST_VALUE: = NULL;

  BECAUSE me in 1... APEX_APPLICATION. G_F01. COUNTING LOOP

  : P8_TEST_VALUE: =: P8_TEST_VALUE | « ; » || APEX_APPLICATION. G_F01 (i) | APEX_APPLICATION. G_F02 (i);

  END LOOP;

  But I still get the data value, not the value for column 'test '.

  For example if I'm changing the value of "N" to 'Y' after selecting the checkbox (client code corresponds to "6") and click on 'Ignore' button. I get the value '; 6n 'instead of '; 6Y'. is it possible that I can get the value of seelectlist has changed?.

  Thank you

  JJ

  Your problem is in the values of the selection list. The element is not sent to use in PL/SQL, best way to do it is with jQuery

  try adding this to your report:

  SELECT APEX_ITEM.checkbox (1, CUSTOMER_ID, NULL, NULL, 'onclick = "javascript:setvalue (this.value)" ') as "-",

  CUST_FIRST_NAME,

  CUST_LAST_NAME,

  APEX_ITEM. SELECT_LIST)

  p_idx-online 2

  p_item_id => CUSTOMER_ID,

  p_value => TEST,

  p_list_values => ' Y; Y, N; NO

  ) 'test' for DEMO_CUSTOMERS

  and to add actions to the lick... button or other trigger.

  $x("P8_TEST_VALUE").value ="";

  $("input: checkbox[name='f01']:checked").each(function())

  {var val = $("select [id ='" + $(this) .val () + "']") .val ();}

  $x("P8_TEST_VALUE").value = $x ("P8_TEST_VALUE") .value + $(this) .val () + val + ";". " » ;

  });

  Hope that this post will be useful for you.
  Andrej Grlica

• change the value of swatch

  Is it possible to change a specific color swatches value?  What I have so far changes the color, but does not maintain its overall value. I'm trying to change the value of set color chart, in turn changing the work already defined in a model.  Hope it makes sense.  Any input would be appreciated.

  var docRef = activeDocument;

  docRef.swatches ['color 1' Base] .color = new RGBColor (0,0,0);

  (1) your code doesn't really, because it's not how you define the new color object. It seems to work because the shade changes from white to black, but it is actually by default all black is not recognize all numbers in your new RGB color. Try to put it to any other color other than black, and you will always get black. The way to do it properly for a sample of process is here:

      var docRef = activeDocument;
      var newColor = new RGBColor();
      newColor.red = 255;
      newColor.green = 0;
      newColor.blue = 0;
      docRef.swatches ['Base Color 1'].color = newColor;
  

  BUT WAIT! There is MORE!

  (2) we will assume that you are using the Global checkbox and not simply rely on the color chart of regular processes to act as if they were global. So in order to correctly set the global shades, you actually do this way, not through nuances, but through 'points '. Fortunately, the tasks of the document have the same name as the nuances related to them, is almost the same statement.

      docRef.spots['Base Color 1'].color = newColor;
  

• change the value of the location attribute in db jca file with the configuration file

  Hello

  How can I change the value of attribute of 'place' in the jca adapter db file by using the configuration level if possible?

  I have the database map file where the first two lines are:

  < name of the adapter-config = "getParty" = 'Database adapter' adapter wsdlLocation = "getParty.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/DB/CRP1"UIConnectionName ="crp1_apps"adapterRef =" "/ >

  ...

  I need to replace the configuration file

  EIS/DB/CRP1

  with

  EIS/DB/DEV

  but this isn't the case. I think that I am not referencing correctly but I don't know how he is correct, that I couldn't find examples for composites and wsdl content, JCA file.

  Please share the idea.

  Thank you

  Anatoliy

  Anatolly salvation,

  You can assign a new value to the property of JCA by using either the Ombudsman as BPEL.

  Pick click entitled value option and add the right attribute to the property JCA jca.db.DataSourceName.

  In BPEL will zoom click the invoke for the DB adapter, go to the Properties tab and add the right attribute to the property JCA jca.db.DataSourceName.

  (edit)

  If you want to use a configuration file to set the value, I suggest a BPEL property, the value can be replaced by using a configuration file and can be assigned to the JCA property using ora: getPreference ("prefName as string");

  When you use a mediator does not have a preference, and you can use a placeholder that you change when you compile the SCA composite. With ANT in combination with hudson, you can easily replace the value (hard) by the environment.

  See you soon,.

  Robert van Molken

  Specialist of the integration of Oracle

  Post edited by: robertvm

• $esxcli to change the value of IOPS / s?

  So im trying to change the value of IOPS / s by '1' it seems im on the right track in looking at a few other scripts that had something similar, but mine does not seem to the entire cluster in loop, look like it does, but only the last host gets the values updates, so I'm missing here?

  Is it a snippet of code to connect to a VC, good practice get guests on a Cluster / Datacenter, then run agaisnt them? ID like to be able to keep a good labour code and then re use it on all my scripts? Now that I see this error Im curious to know if I was fooled into thinking that my other scripts worked not only on all hosts in a Cluster, which is a good way to check that?

  THX!

  # Script Variables
  $VC = Read-Host "Please enter the name of the VirtualCenter.
  $mycluster = Read-Host "Please enter the name of the Cluster or Datacenter Edition"
  $DiskID = "naa.600".
  $esxlogin = get-Credential
  # Connect to VC and get the ESX hosts per cluster named
  SE connect-VIServer $VC | Out-Null
  foreach ($esx Get-cluster $mycluster |) Get - VMHost) {}
  SE connect-VIServer $esx - Credential | Out-Null
  }
  #Retrieve instances esxcli and loop through them
  {foreach ($esxcli in Get-EsxCli)
  $esxcli.system.hostname.get)
  $esxcli.storage.nmp.device.list () | where {$_.} Device-match $DiskID} | % {
  $esxcli.storage.nmp.psp.roundrobin.deviceconfig.set ($null, $_.) Device, [long] 1, "IOPS", $false)
  }
  #Disconnect of ESX host
  foreach ($esx Get-cluster $mycluster |) Get - VMHost) {}
  Disconnect-VIServer $esx.name - confirm: $false
  }
  VCenter #Disconnect
  Disconnect VIServer $VC - confirm: $false | Out-Null

  You get the same behavior (white screen) when you run the script directly from the PowerCLI prompt?

  This could be a phenomenon of PowerGui

• change the value limit in default graphic view, obiee 11g

  Hello
  
  I have two measures with the columns of the year in my report, I have generated a graph.
  
  
  In x - axis, the values of a single measure is beginning with 10,00,000
  
  but another of the measurement values is no more than 10,000. If the second bar lines are not visible in the chart. My question is how to manually change the values on the x - axis.

  Modify the report-> change the properties of the graph-> scale-> change the limit from the default axis manually and enter the values min and max of the axes limits...

  PLS, mark it contributes to...

• Please, do I have with the help of Javascript can change the values of tones? for example my color of nail POLISH with c: 0, m:10, y: 15, k: 0 to change to c: 0, m:0, y: 0, k: 0? Thank you

  Please, I beg you, with the help of Javascript change the values of specific spot color? for example, I have the color called VARNISH with c values: 0, m:10, y: 15 k: 0 and it would help me to change to c: 0, m:0, y: 0, k: 0, in an action. Is this possible? Thank you

  Hello Kon Verter,

  You can change the values in your sample of spot, but you need to check a lot of things before.

  for example, you can do something like this:

  var Vcolor = app.activeDocument.swatches.getByName("Varnish");
  if (Vcolor.color.spot.colorType == ColorModel.SPOT && Vcolor.color.spot.spotKind == SpotColorKind.SPOTCMYK) {
      alert("Black value before: "+Vcolor.color.spot.color.black);
      Vcolor.color.spot.color.black= 0; // and so on
      alert("Black value after: "+Vcolor.color.spot.color.black);
      }
  

  This will change the black value of the task of CMYK color with name Nail Polish 0

  Have fun

• Check box to change the value of the field and reveal hidden text

  Hello

  I need to change a value in a field when you press a checkbox

  the default value can be $ 10 in 'formfield1 '.

  But when the checbox is checked, the value of 'formfield1' must spend $ 8

  I also need a reval text function in "textfield2' of the text hidden to visible.

  Is it still possible to combine in a box?

  I found a code on the forum and changed it, but it does not work as expected, it affects the field, it shouldn't and it behaves a bit funny, here is the code to calculate.

  I also tried to change the value of Off to On, but who has not reversed the procedure than I hoped.

  Well its a start, maybe someone can understand a give me help on the way?

  ________________________________

  custom for the discount calculation

  var nDiscount = 2;

  name of the Sub total field

  var cSubTotal = "formfield1";

  name of the non-Discount checkbox

  var cbNonDiscount = "CheckBox1";

  default value for the non-Discount

  Event.Value = 10;

  see if the purchase is with discount or not non-Discount

  If (this.getField ("cbNonDiscount") .value == 'Off') {}

  Event.Value = this.getField ("cSubTotal") .value - nDiscount;

  }

  put an end to a custom calculation

  Ah, if you want the calculation to take place when the box is checked, use this:

  If (this.getField (cbNonDiscount) .value! = "Off") {}

  Instead:

  If (this.getField ("cbNonDiscount") .value == 'Off') {}