Programming detection devices OR IMAQ in LabVIEW

Similar Questions

• Could not detect USB RIO 7856R in labview 2012 SP1

  Hi @all,

  Why I couldn't detect 7856R USB RIO in labview 2012 SP1? I already install drivers include DVD, see (USB-7856R) in max or, but can not add it to the project manager.

  Data sheet says its compatible (between LV2012 and 7856R)!

  Hey damienski86,

  According to the product page (tab "Panorama"):

  Required software 
  This product requires the LabVIEW FPGA Module 2013 or later Version and NEITHER-RIO Version 13.0 or later driver software.

  I think that you will have to go up to the latest software (2013 SP1 came out today) in order to be able to use your new hardware. Where do you see that the device is compatible with 12.0 specifications?

• How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  Hung Nguyen

  Hung Nguyen,

  The installation of drivers for all targets in real-time remotely is more or less the same. First install the driver (in your case the NO-Sync) on your PC, then install it on your system remotely through MAX. For step-by-step instructions, see install the software on your NI CompactRIO controller.

  See you soon,.

• When I plug my IPOD to the computer, there is no indication of a detected device or in ITunes there is no "peripheral" in the sidebar.

  Original title: IPOD

  When I plug my IPOD to the computer, there is no indication of a detected device or in ITunes there is no "peripheral" in the sidebar.

  Any ideas?

  Hello

  1. were you able to use the IPod even without any problem before?
  2 have you made changes on the computer before this problem?
  3 have you tried plugging it into different USB ports and check?
  4. are you able to use other USB devices on the computer?
  5. have you try to use the IPod even on check and another computer?
  6. what operating system do you use?

  Answering these questions could help us help you better.

  Run the following article fixit tool and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

• Microsoft Picture It! 2001 will not be installed on my computer. The installation program detects that IE 5.5 installation is incomplete.

  Microsoft Picture It! 2001 will not be installed on my computer.  The installation program detects that IE 5.5 installation is incomplete, but I have IE 8.  I'm running Windows XP Version 2002 SP 3.

  My hard drive has been replaced and I can't reinstall Picture It! program.

  Microsoft Picture It! 2001 will not be installed on my computer.  The installation program detects that IE 5.5 installation is incomplete, but I have IE 8.  I'm running Windows XP Version 2002 SP 3.

  My hard drive has been replaced and I can't reinstall Picture It! program.

  ======================================
  You may need to go back to IE6 so that PI2001 to install. Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• The upgrade of Windows will affect the following programs or devices I (need help)

  The upgrade of Windows will affect the following programs or devices:

  These devices may not work properly after the upgrade. Before the upgrade, we recommend that you update the drivers for those devices. Cancel the upgrade, open the control panel and search for "update device drivers" or go to the website of the manufacturer of the device to search for updated drivers.
  • • Keyboard filter

  I want to know how to uninstall it. And

  where I can get this update for the device.

  I have 1215ee DV6

  Product no. - NZ341EA

  Please provide the right solution.

  Launch Control Panel, in the section "Programs" click "Uninstall program. Select 'HP Quick Launch Buttons' in the list, and then click the uninstall

• Scan for Instruments does not detect devices

  Hi, I am using Labview 2011 with a NI USB 6009 and a USB-5133. I don't really know if I can use this scope in my vi as I'm not terribly familiar with Labview in general, but no matter; I've got each of these devices connected to my PC, and eahc of their lights of guard dog is on so that they are actually able to. However, when in Labview I try to use the Instrument Driver Finder to update/install drivers because the devices are currently not available everywhere in my tools, the finder tells me

  "No detected connected instrument.

  I went to find the drivers for the scope of my own and downloaded, but to try to install a message pops up informing me that above all versions had already been installed (it is a work pc shared by many). So apparently the drivers already exist in the computer, and yet he always says that there is no connected instruments.

  When I go to my palette of functions, under the Instrument of e / s-> instrument Drivers, OR-Scope is not listed.

  Any help/advice would be much appreciated.

  Also if it's not put it in the right forum I apologize.

  Thank you!

  Wolley

  Its possible the NOR-Scope driver has been installed after LabVIEW. Try to uninstall the version you have and install later. A repair can also work.

• How to detect the camera firewire on labview?

  I set up my camera IEEE 1394 Basler A 601F. It is detectable on MAX and video it is displayed by the wizard of vision. I have labview 8.2.1 installed with the kit of vision and movement. I need to get the stream in labview for furthur video processing. Should I have the Vision Development module for this?

  Furthermore, what is the process to get the video from a firewire camera in labview. It is similar to the video for USB cameras getting?

  Normal 0 false false false fr X-NONE X-NONE / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  Dear Asad,

  There are three different Modules in National Instruments Vision:

  1. Vision Development (VDM) module
  2. Vision Builder for Automated Inspection (VBAI)
  3. Vision acquisition software (SAV)

  You can perform a basic image acquisition, display and record requests with just the drivers included in the Service, but for any transformation or manipulation, you will need VBAI or VDM and more to GO. See this link for these products: what is the difference between software Vision VDM, VBAI and going TO?

  To see your camera in LabVIEW, I recommend using one of the examples to start shopping. In LabVIEW so you navigate to help > find examples > Input and Output material > IMAQ. You will find lots of well documented examples to help you get started. In addition, the 'Vision and Motion' that you have installed are not a Toolbox. It is a collection of functions that move depending on which driver you have installed.

  Thank you and have a nice day.

   

  Esmail Hamdan | Engineering applications. National Instruments

• iTunes does not detect devices not

  recently downloaded iTunes for Windows (64-bit) 12.5.1. Whenever I connect my devices in my computer, it doesn't detect everything in itunes. They appear in my windows files and I can import pictures and videos but I can't just something again sync on my devices. I tried to restart my computer and its devices as well. has nothing. Please, can someone help me? I have an ipad and an iPhone (ios 9.3.5) 5s mini gen.2 (ios 9.3.5).

  Am having exactly the same problem after upgrading my Iphone 6 to 7 Iphone. Very frustrating!

  I tried to uninstall ITunes and perform diagnostics, but nothing works.

• Note K5 Lenovo VIBE does not detect device Bluetooth Jabra

  Hello

  It's disappointing to start with. Less than 24 hours since I got my hands on the new Lenovo VIBE K5 Note.

  With long journeys to work and given the connectivity bluetooth with the phone is an essential feature to have for me. It worked very well with my previous Samsung phone. However, the same bluetooth device Jabra is getting not even detected in the new Lenovo VIBE K5 Note.

  Please suggest a solution as soon as possible.

  Waiting for a quick solution and intervention.

  Tejas Jani

  It's weird... I used many devices different bluetooth, including headphones and stereo speakers. A connected with bluetooth BMW and mercedes. Sometimes look a little longer and matching is always a concern on ANY bluetooth system.

  But once it is coupled his uber fast. What rom are you on? Already point Marshmallow?

  Is the problem still not solved? You reassign your jabra to sail again?

• Cannot close the dump imaq link to imaq in labview

  Hi there and thanks for opening up this post

  I'm still new in machine vision. I'm working on a project in Labview, but I am not able to connect to the session of vi IMAQ grab to close the session in the IMAQ vi... LabVIEW tells me that the two sons are of different data types: the first type is IMAQdx.ctl, the second is a class IMAQ.

  Can you help me?

  Thank you

  Hello

  It seems that you use close IMAQ but have IMAQdx screw everything else. NOR-IMAQdx and NOR-IMAQ separated driver API, it should be consistent with what set of screw you are using. Since you use IMAQdx, you just use the palette IMAQdx closing.

• My compiled program crashes after the first run (LabVIEW 2009)

  I have a compiled program created with LabVIEW 2009 which, in the first round, once the computer is restarted, works fine but after discontinuation of the program, it will not work properly.

  The program uses a compiled Launcher to dynamically activate a set of VI containing the expectation driven by State Machines (QDSM).  Begins subsequent program launcher module appears fine, and his progress bar shows that she starts each of the VI.  Once the Launcher is complete it removes memory launched Dynamics VI and caressed.  The spear that do not reach the main UI that VI is barely long enough for the observer to see (if there is one) then stops.  The program then went from memory I can say.  There is no process in memory or anything.

  Also, when I try to run the installed version of the exe file on a computer with installed 2009 development environment I get this behavior consistently successful launch once again.

  In both case, my program does raise all errors (that are connected), or runtime generates everything I can see.  Also, when I run my program in the development environment the program does that way.  He has no problem at all.

  I have used this style of architecture front of LV8.6 with all the problems.  Can anyone suggest some possible solutions or even a few debugging tips?  I've never had a problem that I could not duplicate in the development environment, so I'm not sure how to start to attack my question.

  Thanks for any help.

  Jason

  

  I solved the problem I think that (at least with regard to the tests on this point revealed).   After that I added the possibility to connect the past States to of the QDSM, I was able to determine that the program was 'plant' after that I dynamically closed the Panel front of the Launcher.  My program is designed to close the Panel before the pitcher, then pop up the façade of the main user interface.   My EXE is inspired to hold the Launcher with my other files QDSM kept outdoors in specific directories.  What seemed to be happening is that when Launcher closed its façade and before UI opening upward the runtime engine decide since it is y no Windows Open he was closing down.  It's my guess on what might happen any way.  I modified my code to change the Launcher window to hidden and delay for 1/2 second to give a chance to fully start running to the main user interface.  This will correct the problem, or at least worked around her.  If someone out there can explain me exactly what is happening that I sure would appreciate it.

  Thanks for all the help that those of you who responded.  Your advice has been very beneficial and certainly led me to a faster resolution.

  Jason

• Card programming for devices

  Where you turn for specific information, programming interface for devices such as webcams, etc.

  All MFG seems to keep the details of the Protocol between W7 and a private aircraft.
  It must exist somewhere.  Need to write an application for a specific camera: HP KQ246AA.

  Hello

  You must contact the HP Support, see their books online and there may be
  more help in the HP Forums. You can also see the sales of HP.

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Run the program without the need to license labview labview. is this possible?

  Hello

  I'm wondering - is it possible to have a labview program that can be run without the need to license labview?

  Now we can produce programs executables labview but they need licenses for labview.

  Best regards

  s Farashi

  You can create an exe from your source code. In order to make the exe, you need the professional version of LabVIEW or generator of the app to buy separately. The app Builder includes the ability to create a Setup program. You can run the Setup program on the supported of a windows OS versions.

• HowTo detect device only workperimeter

  Sometimes it is important to know if an application is running in work or personal perimeter

  It has always worked for white devices with personal and professional scope:

  bool ApplicationUI::isWorkPerimeter()
  {
      return QDir::currentPath().contains("enterprise");
  }
  

  just found out that it does not work if it is a device of work-scope only.

  is there a way to detect if an application is running in work-perimeter-only devices?

  THX

  I just created a KB article, that you can access:

  How to determine the scope of an Application is running in