programming for PXI-6071e with SCXI1125

Similar Questions

• best program for an artist with a wacom stylus?

  I'm an artist/Illustrator reclassification to digital work and need to know what programs are best suited for high-end, fully digital illustrations. I have a Wacom Intuous Pro pen and press the key. Is Photoshop the best "canvas" for it? Illustrator? ... other?

  Is Photoshop the best "canvas" for it? Illustrator? ... other?

  There is no better. It's just what works for you to do the work and depends on your style of illustration.

  Both are high-quality, versatile and professional tools. The arts community for both is huge and dynamic.

  At the very least, if you learn together, you always want to have the right tools to do your work and collaborate with others.

• Remote access for PXI with DAQmx

  I have a PXI chassis with a real-time embedded (PXI-8186) controller and some modules DAQ (PXI-6259) x 2. I've been programming this via LabWindows with a kind of client-server of RT - UI thing by using network variables and others. For some applications, it would be enough and more convenient to be able to interact with the PXI hardware directly from a connected PC network DAQ.

  The controller running a VISA server, it seems that I could connect to a remote machine with a kind of viOpen ("visa://pxi.somewhere.com//PXI0::15:INSTR"); ") and then contact a particular data acquisition card. But I can't find any information on the programming of the 6259 in any way other than DAQmx or similar.

  First question then: is the interface PXI - 6259 VISA described anywhere?

  More practical would be to continue to use DAQmx, through something like DAQmxCreateDOChan (taskHandle,"pxi.somewhere.com//Dev1/port0/line0:4",...)

  I found references to what we call 'Remote access appliance', for example:

  http://digital.NI.com/public.nsf/allkb/5CC9792C6CD4A34C862565BC0072D5DF

  that seems to put in place something equivalent, but I don't find it to watch it in MAX:

  Start-> all programs-> National Instruments-> NI - DAQ-> the remote device access server

  and I've seen suggestions that maybe it isn't that for traditional DAQ or only pre 7.0, or in any other way was no longer applicable.

  Second question: "Remote device access" are always and how to I install/activate it on my PXI controller?

  Someone at - it clues as to the foregoing, or any other way to get the same kind of features?

  Thank you

  Mike Schacht

  LANL

  Hello Mike,.

  Remote device access was a feature in NOR-DAQ traditional long just now.  This feature was not worn on OR-DAQmx because the framework it was built on does not really correspond with the need of modern times for network security.

  Unfortunately, there is no functionality you describe by saying to DAQmx.  Currently, this type of control is limited to deploying applications to the target of RT.  While the VISA is used for some parts of the DAQmx interaction, these function calls are not documented.  Someone else on the forums may be able to help if they tried to implement something like this in the past.

  Good luck!

• I have wrong associated with a DLL block note as the default program for opening. Can I reset this?

  I have wrong associated with a DLL block note as the default program for opening.  Can someone tell me how to reset it?

  See: http://support.microsoft.com/kb/307859
  TaurArian [MVP] 2005-2010 - Update Services

• Why are there people tecsavy call me to get money for my microsoft programs I already bought with my computers and they crashed my good computer

  Why are there people tecsavy call me to get money for my microsoft programs I already have bought with my computers and they crashed my good computer, I am a stay home Grandma take care my 3 grandchildren, they wanted 300. for my computer with windows vista and now they want 190. for this computer, why microsoft would let people do such things

  s7cwa7

  Hi Julie,.

  Microsoft has none of the unsolicited telephone calls to help you fix your computer. You can consult the following documentation to learn more about the same.

  Avoid phone scams | A cybercriminal Tech Support Scam | Security threats

  Fraudulent emails and credit scam advice cards | Microsoft Security

• Program for a game always ask to choose which program to open it with

  Original title: how to remove programs from my list of default programs without deleting them from my computer?

  Since I had a rogue software, whenever I open something that I have to choose what kind of program to open it with. But I have two files with the same name (one is the installation of a game and the other the actual game) and I can't select the game to go to the list of default programs, as I already have the installation file! Sorry if this makes no sense. :)

  Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and highlight the EXE option and click or double-click the EXE to fix the EXE files file association.  Do the same for LNK.  I think that it can take care of your problem 'open with '.  Then the other problem is more a problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a Lenovo thinkpad and I need a program for working with Laser KX-p7105 pse adv

  I have a Lenovo thinkpad and I need a program for working with Laser KX-p7105 pse adv where is the best download to work with my computer?

  Hello

  Do you mean you want a software that allows the printer Panasonic to work?

  You can download the drivers for your printer from here:

  http://Panasonic.NET/PCC/products/printer/download/p7105download.html#download1

• I paid for a year with the full creative cloud but can't find p´the program to download

  I paid for a year with the full creative cloud but couldn't findthe program to download

  To start https://helpx.adobe.com/creative-cloud.html the Cloud

  -Installation, update or uninstall and launching after installation

• A program of Photoshop for beginners help with things and advertising brochures

  What would be a good program of Photoshop for beginners help with things and advertising brochures

  ' Advertising brochures and things ' seems to imply elements that will be printed on both sides of a piece of paper or make multipage documents.

  Photoshop is an image editor and can have only 1 page per document.

  In short, Photoshop is the application bad for something more than a single item from the front.

  Adobe InDesign is a page layout program that is specifically designed to create multipage documents.

  You can type or place text, photos of the place and the other images and have better control over the placement and arrangement of the elements on the page.

  InDesign, like Photoshop, Illustrator has a steep learning curve.

  You can download Adobe trial versions (these will only work for 30 days) and raise you some books or sign for video lessons on Lynda.com

• PXI-6071e offset drift on the analog inputs

  Hi, I have three cards PXI-6071E, sitting in a PXI-1042 chassis that is controlled by a computer with windows XP.  The 6071Es are connected to the SCB-100 break out boxes that are wired to a pannel of BNC female Panel Mount on twisted pair.

  I noticed that all of my analog inputs will drift around-10 V to + 10 V if they are not connected to what whether forcing them to a certain tension.  This has always happened.  We also see a bit of crosstalk between channels.  For example if I open a panel of test in the measurement and automation Explorer I can watch the voltage read on the drift tickets through their full range, and alteration of the signals on nearby channels will appear on the channel, I am able.

  Is this just standard behavior and to predict?  Is there something more I could do to minimize this drift and crosstalk?  I am trying to reduce noise in my system so I figure optimize my DAQ could not hurt.

  Thank you

  With nothing plugged into the catch to high impedance, drifting you see is quite normal. The front end of the circuitry builds up a charge, crosstalk is proabably due to the multiplexer input (did not check but I think that the 6071 has a) transferring the load to the other channels when they are analyzed.

  Search the Forum of ghosting, you will find related discussions.

  -AK2DM

• Example DDK for PXI-6225

  Hello, I am trying to get the DDK AI working for a PXI-6225 card examples and still receive an output value of 10.599597. I HAVE 0 (68 pins) short-circuited for AI 8 (34 pin) that should lead to a value of 0.0 VDC. I also tried to connect a battery of 9V to terminals and stilll get the 10.599597 value. I know that the Council works because I see all the correct values in the measurement and Automation Explorer. I have already programmed a PXI-6511 and PXI - 6513 PXI - 6704 Council using the DDK examples so I'm quite familiar with the DDK sample Setup, but I can not get this example to work, no matter what I do. Help, please!

  Hi computer guy.

  What example DDK are you using?  Make sure you remove the call to adcReset() because it is only applicable to 625 x materials.  Additionally, make sure that convert it output polarity (selected by aiPersonalize()) and the gain setting and match of research (see ai.h and scale.h) scale factor values you are going for.

  I've also posted a few specific tips 6225 in this thread.

  I hope this helps.

• Software update for PXI

  Hi all!!

  Please help me!

  I PXI-8183 with Labview Real Time 8.5.1 software and I want to change my Labview 8.6 real-time, how can I do?

  Thank you

  concerning

  Kaliman salvation!

  You must first check to see if your software is under the SSP program, if it is then the original buyer should get the free update for it and you should ask for disks, serial number remains the same.

  If you don't have a SSP, you must purchase the upgrade.

  In any case, I recommend call you National Instruments at the number following if you're in the Mexico: 018000100793. It for a representative sale andgive ask your serial number, it can tell you if you're due for upgrade or if you need to buy and the price in the case where you do it.

  Have a great day!

• HP Color LaserJet CP2025n Prin: I need to download the older driver because a program does not work with the new driver

  Where can I find the olderdriver that I can use windows 64 bits 10,

  because a program does not with the new driver.

  The year may be 2014 or almost.

  Your Timo

  @tisalmet

  Thanks for the reply with the details,

  You can activate the Device Manager to view hidden devices by following the steps mentioned below:

  To work around this behavior and display devices when you click Show hidden devices:

  1. Click Start, point to programs, point to Accessories, and then click command prompt.
  2. At a command prompt, type the following command and press ENTER:

     Set devmgr_show_nonpresent_devices = 1

  3. Type the following command a command prompt and press ENTER:

     Start devmgmt.msc

  4. Troubleshoot the devices and drivers in Device Manager.

  For more details: click here

  Uninstall all software and drivers for printers:

  When you need to uninstall a driver completely, the best and safest method is to use the uninstaller of the device (if it has one). If you have added the device to your system with a Setup program (as is the case with most of the graphics card and sound card drivers, for example), you can uninstall it as you would any other program.

  1. Click Start, type uninstall program, and then press enter.
  2. In the uninstall window, which appears, scroll through the list and find your device or drivers. Double-click the entry to start the uninstall process.

  Sometimes devices will not have an uninstall program or the uninstall program will not appear in the list. In these cases, you can use Device Manager to remove the driver completely.

  1. Click Start, type Device Managerand press enter.
  2. Find and double click on the category of the device you want to uninstall (for example, the graphic card would be listed under display card) driver.
  3. Right click on the device, and then click Uninstall.
  4. Windows prompts you to confirm the removal of the device. Click OK to remove the driver.
  5. Once the uninstall is complete, restart your computer as soon as possible.

  Once the above steps are done, click here to download the full software features for your printer and follow the Setup process to start to use your printer again.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Extract and save all the channels of the PXI-5105 with 4 M of edge detection... Help!

  Dear collegaues!

  Please help me to improve my request, exhibit attached and sorry for my English.

  So my task is to extract and save all the channels (eight) of the PXI-5105 with 4 M of detection of peaks and sample rate 4 M with loop 1 sec...

  Entered all my channels are wiring detectors NaI with 0, 5... 1 microsec pulse (really) width and 0 kHz at not more than 40 kHz freq.

  Why I chose the registration of 4 M and the sampling frequency of 4 M namely? Answer is that I tested previously PXI-5105 40 kHz generator and pulse width 0.5 microsec. It works great and detection of peaks indicate 40000 pulses/s for me. If I set lower than 4M record and sample rate of 4 M, it is without work. In my honest opinion record 4 M and the frequency of sampling of 4 M are parameters very min.

  In the detection of peaks time present only 6 working channels... When I connected to diagram more 6 "detector.vi peak" - I see the error "...". out of memory... ».

  Advise me please, what needs to be done to it, it's all working well.

  
  

• GPIB PROGRAM FOR TEMPFORCE

  Hi all

  I want to write a program for tempforce (temptronic), so that my program will control the tempforce as the compressor, head down, heat and cold.

  Please help me to write the program its very urgent now.

  Thank you.

  First, find the manual.  It should contain commands, you can send it via the GPIB bus.  Those who learn.  From there, he is to use some string manipulations to build these commands and with VISAS to send them.