Progressive loading

Similar Questions

• loop a progressive loaded flv without button

  Is it possible to have a progressive FLV recovery after that is done without the need to have all of the button controls? I have four flv files that are loaded onto the main statge via the "loadMovie" command Each film is loaded in a film click support. You can see what I'm trying to do here
  
  http://www.cheltoninc.com/userfiles/Flash/LearJet35video.html
  
  for now, these films are incorporated as it was the only I can bring to loop.
  
  I do not want to incorporate movie files as are about 500 KB to 1 MB. I can drop the quality down of some or create preloaders, but I want to just flow and proofreading. How is that possible?
  
  Thanks in advance.

  Answer!

  on {(full)
  this.autoRewind = true;
  This.Play ();
  }

  We thank for pointing me in the right direction.

• Preloader does not close after that primary site is loaded

  Hi guys,.

  I know it's a really really basic problem, but I am very new to flash and still don't understand AS3.

  I use the sample file external preloader provided with CS5 as a basis for my front loader on measure. It works fine except that once the main site has loaded and is open, the preloader is loaded in the background.

  My code is as follows:

  var contentLoader:Loader;

  loadContent ("index.swf");

  function loadContent(url:String):void {}

  contentLoader = new Loader();

  contentLoader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, loading);

  contentLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, contentLoaded);

  contentLoader.load (new URLRequest (url));

  }

  function contentLoaded(evt:Event):void {}

  Change in //Optionally a portecrochet and the visibility of all of the progressbar.

  addChild (contentLoader);

  removeChildAt (0);

  }

  function loading(evt:ProgressEvent):void {}

  var loaded: number = evt.bytesLoaded / evt.bytesTotal;

  setBarProgress (loaded);

  }

  function setBarProgress(value:Number) {}

  progressbar.bar.scaleX = value;

  }

  How can I make the pre-loader close itself once the main site has been loaded correctly?

  Any help would be really appreciated!

  Thank you!!!

  use:

  var contentLoader:Loader;

  loadContent ("index.swf");

  function loadContent(url:String):void {}

  contentLoader = new Loader();

  contentLoader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRES S, loading);

  contentLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, contentLoaded);

  contentLoader.load (new URLRequest (url));

  }

  function contentLoaded(evt:Event):void {}

  Possibly set up a support clamp and adjust the visibility of the progressbar.

  addChild (contentLoader);

  removeChild (progressbar);

  ProgressBar = null;

  }

  function loading(evt:ProgressEvent):void {}

  var loaded: number = evt.bytesLoaded / evt.bytesTotal;

  setBarProgress (loaded);

  }

  function setBarProgress(value:Number) {}

  progressbar.bar.scaleX = value;

  }

• image slideshow with the counter variable loader

  OK, what I'm trying to do is the following. I want when someone clicks on the prev_btn so he could load imageCounter-1 '.jpg', but I do not know how to propperly this code. Also, is there a way to have fixed a position for Y of the charger and also it's X centered? The pictures are all the hieht side, but the widths are different. I write only the code in question, but if there's more I'll post it as well.

  prev_btn.addEventListener (MouseEvent.CLICK, prevImage);
  function prevImage(event:MouseEvent):void
  {
  clickSound.play ();
  myLoader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, prevLoading);
  myLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, prevLoaded);
  preLoader.visible = true;
  myLoader.load (new URLRequest (imageCount - 1 + '.jpg'));
  function prevLoading(e:ProgressEvent):void
  {
  var loaded: number = e.bytesLoaded / e.bytesTotal;
  preLoader.SetProgress (loaded);
  }
  function prevLoaded(evt:Event):void
  {
  close_btn. Visible = true;
  preLoader.visible = false;
  var tweenAlpha:Tween = new Tween(myLoader,"alpha",None.easeOut,0,1,10,false);
  myLoader.x = 0;
  myLoader.y = 0;
  addChild (myLoader);
  }
  imageCount = imageCount-1;
  }

  next_btn.addEventListener (MouseEvent.CLICK, nextImage);
  function nextImage(event:MouseEvent):void
  {
  clickSound.play (); myLoader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, prevLoading);
  myLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, prevLoaded);
  preLoader.visible = true;
  myLoader.load (new URLRequest(imageCount++1+".jpg"));
  function prevLoading(e:ProgressEvent):void
  {
  var loaded: number = e.bytesLoaded / e.bytesTotal;
  preLoader.SetProgress (loaded);
  }
  function prevLoaded(evt:Event):void
  {
  close_btn. Visible = true;
  preLoader.visible = false;
  var tweenAlpha:Tween = new Tween(myLoader,"alpha",None.easeOut,0,1,10,false);
  myLoader.x = 0;
  myLoader.y = 0;
  addChild (myLoader);
  }
  imageCount = imageCount + 1;
  }

  First of all, you should NEVER use the functions nested - they are a recipe for disaster.

  For starters, you with, the following code should do the same as your original. Do not all what you intend, but, once again, this is something at first (the code is more compact and easier to handle):

  myLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loading);
  myLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loaded);
  
  prev_btn.addEventListener(MouseEvent.CLICK, imageProgression);
  next_btn.addEventListener(MouseEvent.CLICK, imageProgression);
  
  function imageProgression(e:MouseEvent):void
  {
       clickSound.play();
       preLoader.visible = true;
       if (e.currentTarget == prev_btn) {
            imageCount--;
       }
       else {
            imageCount++;
       }
       myLoader.load(new URLRequest(imageCount + ".jpg"));
  }
  
  function loading(e:ProgressEvent):void
  {
       var loaded:Number = e.bytesLoaded / e.bytesTotal;
       preLoader.SetProgress(loaded);
  }
  
  function loaded(e:Event):void
  {
       close_btn.visible = true;
       preLoader.visible = false;
       var tweenAlpha:Tween = new Tween(myLoader, "alpha", None.easeOut, 0, 1, 10, false);
       myLoader.x = 0;
       myLoader.y = 0;
       addChild(myLoader);
  }
  

• loading of the ASO

  Hi guru,.
  
  is someone can you please tell me how the loading process is different in aso and bso? can we use the incremental data load process in aso only model. as on the contrary the loading data for the whole year can load us data for the last three months. or does run every time full load
  
  Thank you

  BSO charges directly to the database, ASO in a buffer, then committed to the database. You have more control over the process with ASO, which allows more flexible incremental loads. You can load incrementally with BSO, but aggregation can become a problem. With ASO, you can progressively load and not prevent users to keep reports while the load is in progress.

• Breaking point taking up too much time for each step for every time to Jdeveloper 11.1.1.7

  Hi all

  I use Jdeveloper to ADF application development 11.1.1.7 and I use 64 bit JDK. When I run my application in debug mode, if the program control passes to the location of the breakpoint taking too in time for the next step (F8) a few times because of this I need to restart the server from WL. During this time of progress/loading showing symbol on the screen. I don't know why this is happening... ? Please someone help me on this.

  Vinoth-

  Try closing the Panel of the Structure of the ADF. I noticed a lot of requres JDev struggle to maintain synchronization with the Structure of the ADF. It helps in the design of JSF page and in brakepoints in support beans and other JSF related classes.

  I also had problems with 64 bit JDK on Windows and came back to 32-bit. (do not remember if I had WLS crashes but I know I had a lot of problems)

  Try growing JDev memory and heap WLS.

• Requirments for URLLoader() on Android SSL certificate

  Recently the certificate SSL on my site https://www.jollysnpas.com has been updated and now all https requests, made by the URLLoader() on Android are denied. This is only a problem when running on a real android device.

  I try to get my hosting provider to investigate, however they may not be very useful so I hope someone here can determine why the new SSL certificate is rejected so I can get to fix their SSL certificate.

  to reproduce the error, the following code illustrates the problem.

  package

  {

  import flash.display.Sprite;

  import flash.events.Event;

  import flash.events.HTTPStatusEvent;

  import flash.events.IOErrorEvent;

  to import flash.events.ProgressEvent;

  import flash.events.SecurityErrorEvent;

  import flash.net.URLLoader;

  import flash.net.URLLoaderDataFormat;

  import flash.net.URLRequest;

  import flash.net.URLRequestMethod;

  to import flash.net.URLVariables;

  SerializableAttribute public class URLLoaderExample extends Sprite

  {

  private var loader: URLLoader;

  public void URLLoaderExample()

  {

  Super();

  var url: String = " " https://www.jollysnaps.com/ ";

  var request: URLRequest = new URLRequest (url);

  var requestVars:URLVariables = new URLVariables();

  Request.Data = requestVars;

  Request.Method = URLRequestMethod.POST;

  loader = new URLLoader();

  loader.dataFormat = URLLoaderDataFormat.TEXT;

  loader.addEventListener (ProgressEvent.PROGRESS, loading, false, 0, true);

  loader.addEventListener (Event.COMPLETE, complete, false, 0, true);

  loader.addEventListener (HTTPStatusEvent.HTTP_STATUS, httpStatusHandler, false, 0, true);

  loader.addEventListener (SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler, false, 0, true);

  loader.addEventListener (IOErrorEvent.IO_ERROR, error, false, 0, true);

  Loader.Load (request);

  }

  private void Completed(e:Event):void {}

  trace (e.Target.Data);

  try {}

  var responseVars:Object = JSON.parse (e.target.data);

  } catch (err: error) {}

  trace (err.name + "" + err.message);

  }

  }

  private void Loading(e:ProgressEvent):void {}

  If {(e.bytesTotal)

  trace ((Math.round ((100 / e.bytesTotal) * e.bytesLoaded)) m:System.NET.SocketAddress.ToString () + '%');

  } else {}

  trace ("file has no size");

  }

  return;

  }

  private void httpStatusHandler (e:HTTPStatusEvent): void {}

  trace ("httpStatusHandler:" + e.type);

  return;

  }

  private void securityErrorHandler (e:SecurityErrorEvent): void {}

  trace ("securityErrorHandler:" + e.text);

  return;

  }

  private void error(e:IOErrorEvent):void {}

  trace ("error:" + e.text + "Type:" + e.type);

  return;

  }

  }

  }

  The code works correctly by running anywhere, but android, showing the contents of the file returned by the URL query. The managed code correctly with the old SSL certificate, but not the new SSL certificate. now, it will fail with the error.

  error: Error #2032: error in workflow. URL: https://www.jollysnaps.com/ Type: ioError

  It's a bit missleading error like what actually happens is android refuses to make the URL request, because it does not trust the SSL certificate and therefore will not send the data over an unreliable link.

  If the URL is replaced by a Web server with a real such as SSL certificate.

  https://www.GoDaddy.com/

  Then, the code works correctly.

  To be clear that I am looking to establish what is inconsistent between the SSL for the site certificate https://www.jollysnaps.com/ and the URLLoader running on an Android device, so I can report to my Web host because they don't seem to take seriously my problem.

  Thanks in advance

  Well it turns out that after watching this post

  olation-error-in-Adobe-Flash-MOVI http://StackOverflow.com/questions/6142137/Bad-Certificate-Name-causes-Security-sandbox-VI

  I discovered the solution.

  The certificate was changed from

  www.jollysnaps.com

  TO

  jollysnaps.com

  While https://www.jollysnaps.com/ applications work well in iOS, BlackBerry and OSX on Android, they fail, however, wish to https://jollysnaps.com/ work.

• does not expect the external preloader?

  Hello! I have a new dilemma regarding external preloaders.

  Now, I've learned that sometimes external preloaders do not wait to load the entire swf file before it runs.

  I read a few tutorials, more precisely, this: http://Sierakowski.EU/list-of-tips/45--two-ways-of-preloading-in-ActionScript-3.html .

  I understand the concept and I applied two methods explained, but always impossible to find a solution: the SWF is running before the preloader finishes loading.

  Can someone help me?

  This is my (useless) code so far:

  import flash.display.MovieClip;

  var myLoadedMovieClip:MovieClip;

  var contentLoader:Loader;

  loadContent ("Index11.swf");

  function loadContent(url:String):void

  {

  contentLoader = new Loader();

  contentLoader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, loading);

  contentLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, contentLoaded);

  contentLoader.load (new URLRequest (url));

  }

  function contentLoaded(evt:Event):void

  {

  myLoadedMovieClip = MovieClip (contentLoader.content);

  myLoadedMovieClip.play ();

  removeChild (progressbar);

  addChild (myLoadedMovieClip);

  }

  function loading(evt:ProgressEvent):void

  {

  var loaded: number = evt.bytesLoaded / evt.bytesTotal;

  setBarProgress (loaded);

  }

  function setBarProgress(value:Number)

  {

  progressbar.bar.scaleX = value;

  contentLoader.visible = true;

  }

  This output shows that everything works as you want, at least, when you test.  everything looks ok when you test?

  and, what is your url where 'see you' a problem?

• problem with external preloader bar with percentage number?

  Hello!
  I'm learning just AS3 with flash cs5 and I used the template "preloader for external file" with the big red bar. The bar is progressing very well! But then, I wanted to add a percentage number so I tried a number of things with the code. The result: the bar does not move forward and the percentage number works allright. I leave the code. Can someone help me?

  
  
  var contentLoader:Loader;
  loadContent ("painting1.swf");
  
  function loadContent(url:String):void
  {
  contentLoader = new Loader();
  contentLoader.contentLoaderInfo.addEventListener (P rogressEvent.PROGRESS, loading);
  contentLoader.contentLoaderInfo.addEventListener (vent.COMPLETE, contentLoaded (E);
  contentLoader.load (new URLRequest (url));
  }
  
  function contentLoaded(evt:Event):void
  {
  removeChild (progressbar);
  removeChild (myLoadText);
  addChild (contentLoader);
  }
  
  function loading(evt:ProgressEvent):void
  {
  var loaded: number = evt.bytesLoaded / evt.bytesTotal;
  load = Math.round(loaded * 100);
  myLoadText.text = String (uint (loaded)) + '% ';
  setBarProgress (loaded);
  
  }
  
  function setBarProgress(value:Number)
  {
  progressbar.bar.scaleX = value;
  }

  You want to set the progress bar scaleX from 0 to 1, but you set it to 0 to 100 so that your bar is 100 times larger than it should be.

  You can change your function of loading in order to:

  ...
  var loaded:Number = evt.bytesLoaded / evt.bytesTotal;
  myLoadText.text = Math.round(loaded * 100) + "%";
  setBarProgress(loaded);
  ...
  

• AS3 Flash Preloader

  Hey guys,.

  I tried to get this preloader days! I finally got it to work, and now when I download on my site and you refresh the page, the .swf file is glued to the screen of the preloader.

  This is my code:

  Stop the framework
  Stop();

  Create a listener to call the function of loading as loads of film
  this.loaderInfo.addEventListener (ProgressEvent.PROGRESS, loading);

  Runs when the loading progress has changed
  function loading(event:ProgressEvent):void
  {
  Determine the charge percentage of bytesLoaded and bytesTotal
  var p: Number = event.bytesLoaded / event.bytesTotal * 100;

  Stretch a progress bar
  progressBar.scaleX = % / 100;

  Define progressText to the charge percentage text box
  progressText.text = int (percent) + "%";

  When the charge is complete, go to section 2
  if(percent == 100)
  {
  this.gotoAndStop (2);
  }
  }

  I read up on this subject for a while now, but I can't seem to understand. I would really appreciate if I can get some tips on what to do.

  clear your cache and change f() to:

  function f (e: Event) {}

  this.gotoAndStop (2);

  }

• some problem in number

  my project bellows
  
  var Total: Number
  var Num:Number;
  loadVariablesNum("Document.txt",0);
  {this.onData = function ()}
  Total = Number (total);
  NUM = Number (num)
  trace (total);
  trace (num);
  }
  out put is the following:
  NaN
  10
  NaN
  5
  ??
  Why is that?
  
  another:
  var Total: Number
  var Num:Number;
  loadVariablesNum("Document.txt",0);
  {this.onData = function ()}
  Total = Number (total);
  NUM = Number (num)
  If (isNaN (Total) {}
  trace (total);
  }
  trace (num);
  }
  }
  The sequel is released
  NaN
  5
  
  so altogether and the Num are not number?
  Why is that?
  need help!
  the rest of my Document
  total = 10 & num = 5 & Munite = 10
  

  Hello

  No need to change the text file.
  This is an error is due to the progressive loading of the .onData functions.
  You use just like that...

  this.onData = {function (success)}
  If (total! = undefined) {}
  Total = Number (total);
  NUM = Number (num);
  trace (total);
  trace (num);
  }
  };

  This will show the correct when output fully charged document.txt.

  Arun

• & quot; tracing for cent & quot;...

  Hi all, I need help I just can't understand this point myself - I have spent a few hours pulling out and try different things and I think I know where I'm wrong-, but may not know how to solve this problem?
  
  When I work on the total bytes, it is seems to be the holder.swf and not the content of the loader, which prevents I would say the work load function:
  
  If anyone knows how I can track the charge percentage of the charger and not the holder.swf? any help would be really appreciated at this stage...
  
  PHP code:
  package {}
  import flash.display. *;
  
  import flash.events. *;
  
  import flash.display.StageAlign;
  import flash.display.StageScaleMode;
  Fl.transitions import. *;
  Fl.transitions.easing import. *;
  import flash.net.URLRequest;
  
  Intro to public class extends MovieClip {}
  private var go here
  private var eBtn.
  private var ldr;
  private var fadeTween:Tween;
  private var loader: Loader = new Loader();
  
  public void intro() {}
  init();
  }
  private function init (): void {}
  example code goes here
  stage.scaleMode = StageScaleMode.NO_SCALE;
  internship. Align = StageAlign.TOP_LEFT;
  
  eBtn = new enterBtn();
  addChild (eBtn);
  eBtn.addEventListener (MouseEvent.CLICK, onClickenterBtn);
  
  LDR = new preloader();
  
  addChild (loader);
  
  
  addEventListener (Event.ENTER_FRAME, onEnterFrame);
  }
  public void onEnterFrame(event:Event):void {}
  
  eBtn.x = stage.stageWidth/2;
  eBtn.y = 350;
  
  }
  private void onClickenterBtn(event:MouseEvent):void {}
  trace ("enter a click on the button");
  fadeTween = new Tween(eBtn,"alpha",Strong.easeOut,1,0,3,true);
  fadeTween.addEventListener (TweenEvent.MOTION_FINISH, remove_eBtn);
  
  
  }
  private void remove_eBtn(event:TweenEvent):void {}
  removeChild (eBtn);
  removeEventListener (MouseEvent.CLICK, onClickenterBtn);
  addChild (ldr);
  LDR.x = stage.stageWidth/2;
  LDR.y = stage.stageHeight/2;
  ldr.addEventListener (ProgressEvent.PROGRESS, loading);
  Loader.Load (new URLRequest ("main.swf"));
  
  
  }
  private void loading(event:ProgressEvent):void {}
  var loader.content.loaderInfo.bytesTotal = bytesTotal;
  var loader.content.loaderInfo.bytesLoaded = bytesLoaded;
  % var = Math.round ((bytesloaded/bytestotal) * 100);
  trace (percent);
  ldr.gotoAndPlay (percent);
  If (bytesloaded > = bytestotal) {}
  removeEventListener (ProgressEvent.PROGRESS, loading);
  removeChild (ldr);
  }
  }
  }
  }

  It would be

  ldr.gotoAndPlay (percentLoaded);

• iPad 2 Mini stuck on the progress bar with the Apple logo and progress bar is not loaded, his impasse

  I pressed on restart all the settings on my iPad Mini 2, so it loaded but it drained. So I rebooted it until he turned back when he turned his back, it was still showing the progress bar, but it was quite moving. I tried to hold down the lock button and the home button, but still, it loads, its stuck on the progress bar and did not progress. I tried to connect to my computer to connect to itunes, but it does Duke host because its deadlock on the progress bar with the apple logo.  .pls help me!

  Try restoring your backup and recovery mode: If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• How can I get the page loading in the visible progress and 3.6 meter?

  1)
  When a page is slow to load, it would be nice to see his progress, if any, that I used to have in the previous ' FF-version. Is it possible somehow?

  2)
  If I choose "without tab" to save space on the screen I the tabs you see when necessary, without going into preferences?

  1. https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

  2. This pref removes the tab bar when there is only one tab open. With two or more tabs Firefox should always show the tab bar. Unless you are referring to a preference added to Firefox by an add-on.

• Firefox 5 adjustable to stop a connection and/or exposure has a bar of progression rather than a single "load"? I miss my 3 version after update.

  Firefox 5 adjustable to stop a connection and/or exposure has a bar of progression rather than a single "load"? I miss my version 3

  You can use this extension.

  • Evar-4-status: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/