Project components appear in another project in JDeveloper

Similar Questions

• How is - a removes all components of a project in Jdeveloper?

  Hi all
  
  I am new to using JDeveloper. I would like to know how to remove a JDeveloper project until the end. Even when I delete the project using the browser of the Application and then create another, earlier JDeveloper invites a warning that such file already exists and should he be crushed. This happens with xml and transformations, a little.
  I would like to delete all the components of the project. Is there a checklist when you remove?
  Once again, since I'm new to the forum, I hope I posted this in the right place and apologies if this sounds too basic.
  
  See you soon,.
  Saida.

  When you delete a JDeveloper project, you are really only to remove the reference to the definition file for the project (*.jpr) from the application definition file (*.jws). This means that even if you want to start over, maybe you want to keep certain files in the original project. If you really want to clean up everything, and then after you remove the project in JDeveloper, use normal file of your system (for example Windows Explorer) management tools to remove the project directory and everything what it. Use your version control for this do if the project or whatever it is that he is under version control.

• Rename a project in JDeveloper 10 g?

  I discovered the urgent need of re - name of a local project in JDeveloper 10 g.
  I doubt that it is as simple as simply rename the file of TJS high, because of the underlying elements that derive their names from the project parent.
  I searched the documentation JDev and have not found a reference that would help me rename my project without instantly breaking the whole project.
  Any of you know how I should address this need for change of name?

  Hello

  seletc project and choose File/Rename from the menu. Thic changes the name of file project.jpr. All directory names are

  Frank

• Whenever I start my PC, a message appears, says another user using the same IP address. Is this a problem

  Whenever I start my PC, a message appears, says another user using the same IP address.

  Is this a problem

  Yes.  One or both may not work properly.  If you use static IP ADDRESS a simple reboot of all devices should correct this.

• How to import the class from another project in Jdeveloper 11.1.1.7

  I have an application with many projects. I create new project with the application and I want to import a class from another project with demand.

  But I am getting error ( found import.somePackge.someClass). I have red that I need to add it to the path of bulid project but no idea how.

  I use Jdeveloper 11.1.1.7

  Click the project--> project properties, dependencies, click here to change the Righ pencil icon and check the build output

• Convert JDeveloper 11 g (11.1.2.3.0) project in JDeveloper 11 g (11.1.1.6.0)

  I built an application using JDeveloper 11 g (11.1.2.3.0) and would like to convert the project to work with JDeveloper 11 g (11.1.1.6.0). Is there an easy way to do this?

  The proposed model is normally not the problem. View controller is a problem if you used jsf2.0 (jsf files) instead of jsf1.2 (jspx files). In this case, you have to redesign the user interface as the jsf2.0 does not work in 11.1.1.x.
  According to the number of pages, this task takes a long time, but can be made.

  Timo

• How to import a maven project in jDeveloper 11.1.1.5.0

  I have some maven projects I want to work in jDeveloper (11.1.1.5.0). How can I turn it in?
  
  First I created a generic project and tried to import my maven in it projects, but when I did the import, jDeveloper does not give the maven project.
  
  Article in the following link does not work for 11.1.1.5.0.
  
  http://www.Oracle.com/technetwork/developer-tools/jdev/maven11g-090173.HTML#5
  
  Could someone please help?
  
  Thank you.
  C

  You will need to download the extensions of the integration of maven. Set the correct proxy tools-> Preferences-> Web Browser & Proxy and then visit help-> updates. You will find two extensions maven to download.

• How to access a project using JDeveloper Extension libraries

  Hello
  
  I am working on a class for JDeveloper Extension loader. My scenario is:
  
  1. I created a new java using JDeveloper Extension file.
  2 based on setup of libraries in the project properties, COMPILE this new java file and load the current ContextClassLoader.
  3. use the class responsible for doing something else (generate a new artifact).
  
  Step 3 is unlikely to change, so what I have to do is to compile the new java file and load it into the ClassLoader. However, I can not get the list of libraries in the context of the project dependencies. When I look in the JDeveloper extension API, I found this example:
  
  Import oracle.jdeveloper.model.JProjectLibraries;
  Import oracle.jdeveloper.library.JDK;
  Import oracle.jdeveloper.library.JLibrary;
  
  Connect the adapter.
  JProjectLibraries projLibs = JProjectLibraries.getInstance (project);
  
  Download the project JDK.
  JDK jdk = projLibs.getJDK ();
  
  Get an array of libraries referenced by this project.
  Library [libs = projLibs.getLibraries ();
  
  However, I can not find oracle.jdeveloper.model.JProjectLibraries under JDevelop 11.1.2.0.0 (11 GR 2). The document is 11 GR 1 material. I don't know if this one is obsolete, or is it anyway to get the list of library to a project.
  
  I tried the following:
  
  JdevClassLocatorFactory jdevClassLocator = new JdevClassLocatorFactory();
  ProjectClassLocator projClassLocator = (ProjectClassLocator) jdevClassLocator.getProjectLocator (app, currentProject);
  projClassLocator.getLibrariesFor (currentProject);
  
  However, getLibrariesFor (Project) is a protected method, non-public method. Is there anyway that I can compile and load the java file newly created programmatically?
  
  Best regards
  
  Harry

  Harry,

  For the execution of a project class path, use oracle.jdeveloper.model.PathsConfiguration.getInstance (project) .getRunClassPath () which includes required to carry pots and .class files.

  Keimpe Bronkhorst
  JDeveloper team

• compile projects in Jdeveloper

  I have an ADF web application that has 2 projects. After the compilation of each project, Jdeveloepr creates files?
  If I compile these projects in the second time, jdeveloper, create new files and cover the 'old'?

  After the compilation of each project, Jdeveloepr creates files?

  Yes, that's the point of compiling all - create .class files in your .java files

  If I compile these projects in the second time, jdeveloper, create new files and cover the 'old'?

  If a .java file has changed since the first compilation, then Yes; Moreover, '' maybe. '' If you do a 'make', JDeveloper must detect the .java file is no need to recompile and skip - 'rebuild' should recompile everything whether or not she needs.

  John

• How to share common classes across multiple projects in Jdeveloper?

  Hi Experts,
  
  I have a basic question.
  I use Jdeveloper 11 g and have divided my app in 2 projects (Model (ejb's) and Viewcontroller (jsf + beans controlled etc.)).
  The pilot project has a (named VisitingScholarBean) stateless session bean that uses a java bean class (named VisitingScholarDetails) defined in the ViewController project.
  The method used in the stateless session bean is public Sub saveVSDetails (VisitingScholarDetails vsDetails).
  Now the question is that the class is VisitingScholarDetails part of the ViewController project only but is used in the template project.
  Then, when I try to run the application, it gives an error saying that

  weblogic.application.ModuleException: Exception preparing module: EJBModule(VisitingScholar-Model-ejb)
  [EJB:011023]An error occurred while reading the deployment descriptor. The error was:
   edu/nyu/ecoms/oaa/vs/web/backing/VisitingScholarDetails.
       at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
       at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
       at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
       at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
       at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
       Truncated. see log file for complete stacktrace
  java.lang.ClassNotFoundException: edu.nyu.ecoms.oaa.vs.web.backing.VisitingScholarDetails
       at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
       at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
       at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)

  I can't reproduce the same class of VisitingScholarDetails in two projects that will lead to duplication.
  Please let me know how to include the VisitingScholarDetails class in the ejb - jar without replication there in projects and model view controller.
  Thanks for your time and your help.
  
  Published by: user10376431 on January 24, 2010 06:25

  Welcome to in OTN.

  to do two projects can access its classes you should goto the project---> dependencies property and then add the other project.

  in your case:

  try to goto you model project---> dependencies property---> change the dependencies.

  you will find your ViewController project. Expand it check thin in the release build.

  You can do this for the project also ViewContoller as:

  GoTo you project ViewContoller---> dependencies property---> change the dependencies.

  you will find your model project. Expand it check thin in the release build.

  Sameh Nassar

• Cargo space for Panel automatically appear on another monitor

  I know that with Adobe Premiere and After Effects, I can create a workspace where a Panel automatically opens on another monitor when I open the software.  I note however with Adobe InDesign, Photoshop or Illustrator it's not a way to do what I can see.  I want to how far my real project opens on a separate monitor when I open the project.  Currently, once the project opened I still drag it to my other monitor.  Is there a way for the project window automatically opens on a different screen when I open the program?  Thank you.

  I'm on a PC and I can save my workspace so it appears on the screen you want.

  Everything I do is open all panels I need on the individual view and arrange them how I wish. Then you go to the window > workspace > new workspace...

  

  Then name your new workspace...

  

  Once you have done this, you, workspace is saved, and each time you close the application and open that workspace will be as you left it.

• Cannot open links that are supposed to appear in another page.

  Whenever I left click to open a link that is designed to open in another window, as a PDF file or a few sites Web which are supposed to the top of the page open in another window, the site opens very briefly with the words subject: empty, then it closes immediately.

  How can I fix it?

  Thank you!

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Album appears in another list of artists

  When I see all the albums Dylan an album by Baez appears because he was the composer of a track.  If I list all the albums of Cohen from the same album Baez appears because he was the composer of another track.  This only happens with a specific Baez albu

  See the grouping of tracks in albums. Having the same composer should not cause any connection between the various albums or artists. More likely is an irregular use of the sort fields.

  TT2

• Changes made in a symbol appear in another

  I have a symbol called "a". I needed 2 copies, so I duplicated A and renamed the new symbol to B. I have now have A and B, identical copies of each other.

  I've sailed inside the symbol A where I entered another symbol, 'A1 '. Inside > A1, I removed an image and added another image. No problems so far.

  Then, I returned on the stage and sailed in the symbol B > B1. To my surprise, the same image change, I did has > A1 already appeared in B > B1 (even though I duplicated A * before * this change).

  When I change the image inside B > B1, this same change is this back to A > A1.

  It's as if these two symbols, A and B, are mirrors of each other, even after modification. Problem is, I don't want mirrors. I need that they are slightly different.

  I thought that duplicate stage may be my problem. I started on (by unscrewing several steps and by closing and by creating a new document entirely). This time, I copied A and stuck on the scene. I came across the same problems.

  OK, then guess: this time, I went in a symbol and copied its elements/sub-symboles. I went back to the scene and they stuck here. Selected items/symbols and converted into a new symbol. Same problem!

  I'm puzzled. I * really * don't want to recreate each element/sub-symbole. There are many of them, and it would be very tedious. Please help me to avoid this!

  You need to duplicate symbols in the library not in the assets Panel. This way you can modify them as you wish.

• Touch the touch screen moves the cursor appear on another monitor in a multi-monitor for Windows 7 system

  There are three 3 monitors on this system. Two of them are the screens LCD Dell 2407WFP-HC and one is the touchscreen Acer T230H. Dell monitors are connected to a NVIDIA Quadro FX3500 and identify as monitors 1 and 2. The Acer monitor is connected to a NVIDIA GeForce 7600GS and identifies as monitor 3. The system runs Windows 7 Ultimate x 64, with updates. Everything works fine except for the touch screen feature.

  According to the instructions I used the Tablet PC configuration to configure the touch screen. In the installation program, reports monitor 2 Dell incorrectly as having entered touch available and the Acer monitor 3 reports as not having NOT available - also incorrect enter key.

  When I touch the Acer screen, the cursor appears on the monitor Dell 2 and moves according to the movement of my finger on the Acer screen.

  1. Go to the control panel and search for "Touch".
  2. Click on 'The Tablet PC settings'
  3. Click on "Setup"... "right" configure your stylus and touch displays.
  4. Choose "enter." »
  5. Press the 'Enter' key until you see the instructions displayed on your actual touchscreen.  Tap the screen and it will say something like "press ENTER to move to the next step.

  You should now see your contact to events (and mouse) are displayed on the touch screen when you... Well, touch.

  Hope that helps.