compile projects in Jdeveloper

Similar Questions

• How is - a removes all components of a project in Jdeveloper?

  Hi all
  
  I am new to using JDeveloper. I would like to know how to remove a JDeveloper project until the end. Even when I delete the project using the browser of the Application and then create another, earlier JDeveloper invites a warning that such file already exists and should he be crushed. This happens with xml and transformations, a little.
  I would like to delete all the components of the project. Is there a checklist when you remove?
  Once again, since I'm new to the forum, I hope I posted this in the right place and apologies if this sounds too basic.
  
  See you soon,.
  Saida.

  When you delete a JDeveloper project, you are really only to remove the reference to the definition file for the project (*.jpr) from the application definition file (*.jws). This means that even if you want to start over, maybe you want to keep certain files in the original project. If you really want to clean up everything, and then after you remove the project in JDeveloper, use normal file of your system (for example Windows Explorer) management tools to remove the project directory and everything what it. Use your version control for this do if the project or whatever it is that he is under version control.

• Rename a project in JDeveloper 10 g?

  I discovered the urgent need of re - name of a local project in JDeveloper 10 g.
  I doubt that it is as simple as simply rename the file of TJS high, because of the underlying elements that derive their names from the project parent.
  I searched the documentation JDev and have not found a reference that would help me rename my project without instantly breaking the whole project.
  Any of you know how I should address this need for change of name?

  Hello

  seletc project and choose File/Rename from the menu. Thic changes the name of file project.jpr. All directory names are

  Frank

• 11.1.1.7 to 12.1.3 Migration - Compilation project ADF error

  Hello

  I have a BPM Application that has been developed in 11.1.1.7 and tested.

  It has a BPM project and a project of the ADF with TaskForms created from human tasks.

  I downloaded JDeveloper BPM 12.1.3 and open the same application.

  The Migration of 11.1.1.7 to 12.1.3 succeeds according to JDeveloper.

  The BPM project gets compiled successfully.

  But the ADF project with task form gives the following compile error. Tried to build after having cleaned the request also.

  I have not found any information on the details of error also. (even after the verbose activation in JDeveloper)

  So I tried to open some other BPM applications working in 11.1.1.7 and migrated to 12.1.3.

  Each of them gave the same error.

  Some of my BPM applications have ADF projects that do not contain the TaskForms created from human tasks and they get compiled successfully.

  I tried to create a new Application of BPM with a TaskForm new since a human task, and it gets compiled successfully.

  Error

  ----

  Error: < J2EE > < BEA-160187 > < weblogic.appc failed compile the application. Recompile with the option - verbose for more details on this issue. >

  It seems that this problem was confronted over early also in earlier versions, but couldn't see it answered in the following positions

  Re: BEA-160187 error try to migrate 11.1.1.4 app to 12 c

  https://community.Oracle.com/thread/2593716

  I was wondering if anyone found a solution for this.

  Appreciate any help.

  Thank you

  Sameer

  I have this same problem.

  I had the same error after importing my 11g 12 c Jdev asks...

  Error:

  I turned verbose on my ADF and BPM projects.

  My BPM project built without any problem.

  My ADF project was the problem... after he complained of the namespace in my weblogic.xml.

  On the weblogic.xml, I've changed that...

  http://www.BEA.com/ns/WebLogic/WebLogic-Web-app">

  for this...

  http://xmlns.Oracle.com/WebLogic/WebLogic-Web-app">

• How to access a project using JDeveloper Extension libraries

  Hello
  
  I am working on a class for JDeveloper Extension loader. My scenario is:
  
  1. I created a new java using JDeveloper Extension file.
  2 based on setup of libraries in the project properties, COMPILE this new java file and load the current ContextClassLoader.
  3. use the class responsible for doing something else (generate a new artifact).
  
  Step 3 is unlikely to change, so what I have to do is to compile the new java file and load it into the ClassLoader. However, I can not get the list of libraries in the context of the project dependencies. When I look in the JDeveloper extension API, I found this example:
  
  Import oracle.jdeveloper.model.JProjectLibraries;
  Import oracle.jdeveloper.library.JDK;
  Import oracle.jdeveloper.library.JLibrary;
  
  Connect the adapter.
  JProjectLibraries projLibs = JProjectLibraries.getInstance (project);
  
  Download the project JDK.
  JDK jdk = projLibs.getJDK ();
  
  Get an array of libraries referenced by this project.
  Library [libs = projLibs.getLibraries ();
  
  However, I can not find oracle.jdeveloper.model.JProjectLibraries under JDevelop 11.1.2.0.0 (11 GR 2). The document is 11 GR 1 material. I don't know if this one is obsolete, or is it anyway to get the list of library to a project.
  
  I tried the following:
  
  JdevClassLocatorFactory jdevClassLocator = new JdevClassLocatorFactory();
  ProjectClassLocator projClassLocator = (ProjectClassLocator) jdevClassLocator.getProjectLocator (app, currentProject);
  projClassLocator.getLibrariesFor (currentProject);
  
  However, getLibrariesFor (Project) is a protected method, non-public method. Is there anyway that I can compile and load the java file newly created programmatically?
  
  Best regards
  
  Harry

  Harry,

  For the execution of a project class path, use oracle.jdeveloper.model.PathsConfiguration.getInstance (project) .getRunClassPath () which includes required to carry pots and .class files.

  Keimpe Bronkhorst
  JDeveloper team

• Compilation project Playbook

  I have a project I want to compile for the Playbook.  I wonder how to proceed.  When I run this...

  cd C:\Program Files\Research In Motion\BlackBerry WebWorks Packager for PlayBook\bbwp
  bbwp C:\Blackberry\myapp /o C:\Blackberry\myapp\build
  

  I get...

  [INFO]            Parsing command line options
  [ERROR]             Failed to find WebWorks archive
  

  Looks like it's looking for a .zip file compile?  Every time I change the request that I need to create a zip, compile it, and install it then?

  You will need to firstly zip all the files that make up the application (inside the app dir so don't zip app dir itself), and then call the bbwp command. I was a little confused at first as well!

  My stream (for Mac OS X) is:

  inside the app dir:

  zip - r sc.zip

  ~/bbwp/bbwp the sc.zip/o Update

  which translates a file 'sc.bar' insizing appdir/compiled

  I hope this helps!

• How to import the class from another project in Jdeveloper 11.1.1.7

  I have an application with many projects. I create new project with the application and I want to import a class from another project with demand.

  But I am getting error ( found import.somePackge.someClass). I have red that I need to add it to the path of bulid project but no idea how.

  I use Jdeveloper 11.1.1.7

  Click the project--> project properties, dependencies, click here to change the Righ pencil icon and check the build output

• Convert JDeveloper 11 g (11.1.2.3.0) project in JDeveloper 11 g (11.1.1.6.0)

  I built an application using JDeveloper 11 g (11.1.2.3.0) and would like to convert the project to work with JDeveloper 11 g (11.1.1.6.0). Is there an easy way to do this?

  The proposed model is normally not the problem. View controller is a problem if you used jsf2.0 (jsf files) instead of jsf1.2 (jspx files). In this case, you have to redesign the user interface as the jsf2.0 does not work in 11.1.1.x.
  According to the number of pages, this task takes a long time, but can be made.

  Timo

• How to import a maven project in jDeveloper 11.1.1.5.0

  I have some maven projects I want to work in jDeveloper (11.1.1.5.0). How can I turn it in?
  
  First I created a generic project and tried to import my maven in it projects, but when I did the import, jDeveloper does not give the maven project.
  
  Article in the following link does not work for 11.1.1.5.0.
  
  http://www.Oracle.com/technetwork/developer-tools/jdev/maven11g-090173.HTML#5
  
  Could someone please help?
  
  Thank you.
  C

  You will need to download the extensions of the integration of maven. Set the correct proxy tools-> Preferences-> Web Browser & Proxy and then visit help-> updates. You will find two extensions maven to download.

• Strobe Media Player broke after assets.swc of compilation and compilation project in Flash Builder

  I use CS5.5 - Flash Builder 4.5 and Flash Professional 11.5.1.349.  If I import a new Strobe Media Player 1.6.328 project into Flash Builder and compile, it works as expected and the StrobeMediaPlayback.html page load in my browser and behaves normally.

  Then I load assets.fla into Flash Professional and don't edit and publish a new assets.swc.  Then I go back to Flash Builder and refresh the StrobeMediaPlayback project and recompile.  This time when StrobeMediaPlayback.html loads in the browser, the SWF Strobe is instantiated on the page but is not executed, i.e. no play button and no bar scrub down, just a black box.  The black box right button brings up the Flash menu so the SWF load has it but stopped somewhere running.

  I try to get the debugger working in Flash Builder, but so far without success.

  I hope that someone has seen this before and has some ideas.

  Kind regards

  Tim

  The problem was simply to fonts.  Fonts in StrobeMediaPlayback/assets/fonts must be installed in the operating system.  In my case Windows so just right button on the font file and select install.

• error when compiling bean in Jdeveloper

  Hello
  I downloaded a bean that read data from excel file and put in the database, to the instruments in forms.
  When the bean is trying to read the number of xls, it stops with the message indicating the type mismatch.
  I read the source of the bean, I find that the method used is poi api apache getStringCell.
  I take the source and I try to change it, in order to be able to read number of xls.
  My jdeveloper10g is running with JDK 1.4, so I add jdk1.5 to change the bean.
  I have the problems of import library. and finally the program compiles with this error message
  
  * Error: initialization error: class file has wrong version 49.0, should be 45.3 or 46.0 47.0 48.0 on classpath C:\JDK1.5\jre\lib\rt.jar; C:\JDK1.5\jre\lib\i18n.jar; C:\JDK1.5\jre\lib\sunrsasign.jar; C:\JDK1.5\jre\lib\jsse.jar; C:\JDK1.5\jre\lib\jce.jar; C:\JDK1.5\jre\lib\charsets.jar; C:\oracle\Ora10gDS1012\jdev\mywork\AppXls\Prjxls\classes; C:\oracle\Ora10gDS1012\jdev\mywork\AppXls\Prjxls\imported_classes; C:\Documents and Settings\makhloufr\Mes documents\XLSUTIL\poi-3.5-FINAL.jar; C:\oracle\Ora10gDS1012\jdev\lib\ext\frmjdev_pjc.jar**
  
  Please help me

  Looks like the classes that you use have been compiled with a different version of JDK.
  Try using JDeveloper 10.1.3 - who built in JDK 5.

• How to share common classes across multiple projects in Jdeveloper?

  Hi Experts,
  
  I have a basic question.
  I use Jdeveloper 11 g and have divided my app in 2 projects (Model (ejb's) and Viewcontroller (jsf + beans controlled etc.)).
  The pilot project has a (named VisitingScholarBean) stateless session bean that uses a java bean class (named VisitingScholarDetails) defined in the ViewController project.
  The method used in the stateless session bean is public Sub saveVSDetails (VisitingScholarDetails vsDetails).
  Now the question is that the class is VisitingScholarDetails part of the ViewController project only but is used in the template project.
  Then, when I try to run the application, it gives an error saying that

  weblogic.application.ModuleException: Exception preparing module: EJBModule(VisitingScholar-Model-ejb)
  [EJB:011023]An error occurred while reading the deployment descriptor. The error was:
   edu/nyu/ecoms/oaa/vs/web/backing/VisitingScholarDetails.
       at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
       at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
       at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
       at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
       at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
       Truncated. see log file for complete stacktrace
  java.lang.ClassNotFoundException: edu.nyu.ecoms.oaa.vs.web.backing.VisitingScholarDetails
       at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
       at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
       at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)

  I can't reproduce the same class of VisitingScholarDetails in two projects that will lead to duplication.
  Please let me know how to include the VisitingScholarDetails class in the ejb - jar without replication there in projects and model view controller.
  Thanks for your time and your help.
  
  Published by: user10376431 on January 24, 2010 06:25

  Welcome to in OTN.

  to do two projects can access its classes you should goto the project---> dependencies property and then add the other project.

  in your case:

  try to goto you model project---> dependencies property---> change the dependencies.

  you will find your ViewController project. Expand it check thin in the release build.

  You can do this for the project also ViewContoller as:

  GoTo you project ViewContoller---> dependencies property---> change the dependencies.

  you will find your model project. Expand it check thin in the release build.

  Sameh Nassar

• BSOD when compiling project CVI 2013 SP1 from a network drive

  Gents,

  I just received and installed CVI2013 SP1 (version 13.0.1 build 201) and I have the same problem that I see with patch f1. When I generate several times my project which is located on a network (due to the clearcase version control) drive I get a BSOD. If I copy the entire local project drive problem disappear.

  I put my project (CFS and PRJ) files as an attachment, maybe he could help you find the problem.

  Kind regards

  Stéphane

  Gents,

  I upgraded my clearcase to version 8.0.0.9 and am now able to correctly create the installers when my project is on vibrant display.

  Thanks a lot for your support,.

  Kind regards

  Stéphane

• Project components appear in another project in JDeveloper

  Hello friends,
  I am trying to create a new OFA project under a new workspace. In the browser of the Application, there is already another project in a different workspace.
  In the new project when I create a component (say a VO) giving a package name quite different (compared to the other project in the other workspace) it is created in the former thus and old components of projects with the package is created in my new project as well.
  Can you if it doesn't matter who you please let me know why this phenomenon happens and how I have to prevent this.
  
  Concerning
  Hawker.

  Steps to follow:

  1. go in the project properties.
  2 > project content
  3 > resources

  4. There will be a region of included/excluded tab at the bottom half.
  5. go in the excluded tab and delete individual files, or parcel or package basis.

  I hope this helps.

  -Prince
  [email protected]
  http://princekapoor82.blogspot.com/

• Question when compiling PABCS in Jdeveloper 11.1.1.3

  Hello
  
  I use Jdeveloper 11.1.1.3 to create a PABCS worker and try to deploy it to WLS (SOA Suite 11.1.1.3 with AIA 11 GR 1 material). During construction, my PABCS get an error as shown below in the composite.xml.
  
  Error (73,21): Type of reminder to the "SyncWorkerMaximoProvABCSImpl" Source port does not type of reminder for «SyncWorkerMaximoProvABCSImplProcess» target port
  
  When I visited the source it says:
  <>wire
  < source.uri > < source.uri > SyncWorkerMaximoProvABCSImpl
  < target.uri > < target.uri > SyncWorkerMaximoProvABCSImplProcess/SyncWorkerMaximoProvABCSImpl
  < / thread >
  
  Can I get pointers or guidance on the same as to why I get this error? I don't have this error in Jdeveloper 11.1.1.2.
  
  Kind regards
  Neeraj Sehgal

  Hi Neeraj,

  You can find information about bugdb https://bug.oraclecorp.com/.
  If you do not have access, it is the same problem that you have reported here.

  We have fixed this for the next version of 11.1.1.4.0, at the same time, you can work around such suggested by Rahul.

  Kind regards
  Nezha