Project does not load in the Simulator.

Similar Questions

• Project failed and the project of packaging is not loaded to the Simulator

  Hello

  Whenever I run the bb Simulator on my Eclipse, it always gives me "Packaging project failed" and my project sometimes appears in the downloads on the blackberry Simulator (even it is not in the package), but most of the time, it says "Module not found" or it is not loaded in the Simulator.

  What is the cause of this problem and how to fix it? Thank you.

  I use the Simulator to 9700 with OS 5.

  Hi all

  I just tried to restart my laptop and it works all of a sudden. I still don't know what the problem was, since there is no error before packing 'failed '. I hope that never, it will fail again.

  Thanks to all for the replies!

• acerEXTEND does not load on the computer (Windows 7)

  acerEXTEND does not load on the computer (Windows 7/10). Error message says I need to be administrator. Computer said that I am logged on as administrator.

  Good to hear it!

• icon does not appear in the Simulator

  Hi all

  I developed a Java midlet application in Blackberry file in Eclipse 3.6.0 and it works Simulator Blackberry 9800. However, the icon that appears in the Simulator is a default icon for BB but not the icon that I have included in the res img file. I tried with several sizes of icon as 80 x 80, 68 x 68, 48 x 36. but my icon still does not appear in the Simulator.

  I would like to have some advice from you on how to correct the situation.

  Best regards

  Nikorn L.

  Hello

  (1) resolution-> height-360

  width-480 app icon .png size 80 X 80

  (2) resolution->

  height-480

  width-360 app icon size 53X53.png

  (3) resolution->

  height-240

  width-320 app icon size 32X32.png

  It is desirable for the application icon size please use this same size

  step to add the application icon in the plugin with eclips

  1) took 2 pictures of the same size and just change the name (image.png and image_rollover.png) and keep it in res folder

  (2) open the App discriptor.xml add two images checked roll it on the image

  (3) save it and clean up the Simulator and run it.

  Thank you

• App does not start on the Simulator, error: (this file could not be opened. Make sure you have the proper permissions and try again).

  I get an error when I try to run my application after packaging and loading on the Playbook Simulator.

  When I try to start my application, I get a white screen for 1 second, it flashes black for a second before leaving white and then I get this error message: "this file could not be opened. Make sure you have the proper permissions and try again. »

  

  I have in my source folder:

  config. XML

  Icon.PNG

  Index.html

  Load.js

  Progress.CSS

  I don't think that my code using anything that requires permissions. (that is to say, does not use the shared files, or camera, etc.)  At the moment it is simply a text box and a button that calls code that retrieves data from the database I have. API reference, he said that I don't need permission for the use of the HTML5 and sql database.

  This is my config file:

  
  http://www.w3.org/ns/widgets"
          xmlns:rim="http://www.blackberry.com/ns/widgets"
          version="1.0.0.0">
  
    Test
  
    
      A simple test app.
    
  
  My Name
  
    
  
  access_shared
  
  
    
    
  
  
  

  I don't have any uses which I put in the "access_shared" to test, but it did not help.

  My app works very well in the Opera browser, and also in the training Simulator, I don't understand why it does not work on the playbook Simulator.

  I read something on the extension of the Javascript and exporting to a JAR file. Do I need to do? I have only a single .js file with a few defined variables and functions that implement the functionality of database/sql.

  I can't think of anything...

  Make sure that the index.html file referenced in your config.xml file has exactly the same name as the index.html file in your application.  You list all of your files with the 'I' for 'Index.xml' in capital letters.  The Tablet OS applies a case-sensitive file system.

  If this is the case, I suggest rename Index.html index.html, reconditioning and try again.

• BlackBerry Webworks App does not work on the Simulator after conditioning

  Hi everyone, I ' ve developed a webworks app and everything works fine on the emulator ripple, but when I load it on the Blackberry (9860 and 9930) Simulator... it loads successfully (I can see the icon, etc.), but when I open it, appears only a WHITE SCREEN...!

  I thought it was the Blackberry Simulator, so I changed it (does not work)

  I thought it was my application, so I leave my fair "index.html" with a BLACK background (does not work)

  the Validation of my config.xml file is fine, and I have not any idea on how to solve this problem!

  Help please, thank you

  

  

  http://mundourbanohn.com/Simulator1.jpg

  Hello, thanks for people, but I already solved this problem, I had a div with POSITION: FIXED; and apparently WebWorks does not support this CSS property, so I removed it and everything works fine. Thanks in any case. Concerning

• My iPhone does not load unless the cable is placed just to the right and the phone is still completely. Advice?

  Hey everybody. Since a few days, I have had a hard time charging my iPhone. It all started when my phone onto my computer. He suddenly began to vibrate, and the charging symbol flickered on and outside. Since then, I had to mess with the power cord plugged into the phone until it starts to load. Once it starts to load and remains always completely, is perfectly fresh. The problem is that I do a lot of work and outdoor recreation such as hiking, and I need to charge my phone on the road sometimes. But once I'm start moving the phone around, it does not load until I have reposition it. My phone had not been dropped, smashed, splashed with water, or something serious in several days or even several weeks before acting. This could be a software problem? I cleaned the inside of the charge socket and the charge lead works fine with other devices. I also restored the phone to factory settings and then restore a backup. Any advice would be appreciated.

  Clean the hole of the support and review it with a bright light. You must get it squeaky clean and without bending the rather delicate pins. And make sure that the bent pins.

• App-Manager does not connect to the Simulator OS Firefox on Windows 7

  OS: Windows 7

  Firefox: 28

  6.0pre8.20140112 Simulator 1.2 Firefox OS

  When I run the simulator it opens fine and I see a Firefox OS Desktop
  But the App Manager does not connect. The console at the bottom right says:

  .. localhost:56455 options (the port varies)

  .. connection timeout. Possible causes: has not clicked 'accept' (guest).

  .. .disconnecting

  .. .disconnected

  I have disabled my firewall, restarted firefox and even system - did not help
  There is a similar bug - but I don't know if we are talking about the same thing:
  https://support.Mozilla.org/en-us/questions/988385

  Thank you

  Well - I already knew these links and I can't find anything useful
  Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
  This one works very well

• My 6s does not load.  The Apple store near is more than 2 hours away.  Apple other uses to repair?  Maybe ATT?

  My 6s does not load.  I'm sure it's a hardware problem with the phone for 6 s wife works very well using the same strings of Lightning.  The Apple store near is more than 2 hours away.  Apple uses ATT or Bestbuy as a service center?

  No, they have not. You have the possibility to contact the Apple Support and arrange for a letter if you do not want to travel to the Apple Store.

• Windows 7 does not load on the laptop. Satellite L series

  Not sure what happened all of a sudden with my laptop, but it does not load windows. This is the error msg I get:

  Intel UNDI, PXE - 2.0 (build 083)
  Copyright (C) 1997-2000 Intel Corporation

  For Atheros PCIE Ethernet Controller v2.0.0.9 (15/12/09)

  Check the connection of the cable!
  PXE - M0F; Exit Intel PXE ROM.
  No boot device - insert boot disk and press any key

  I tried using the recovery disk for the repair of the system and using the sfc/SCANNOW utility, but both just run it for hours (12) and not going anywhere.

  I tried reinstalling the RAM and nothing.

  Help, please!

  Liz

  Post edited by: lizandcourtney

  1. enter in BIOS
  2. restore default values
  3. exit & save changes

  Youre system should boot in AHCI now again. If you get the same message:

  1. enter in BIOS
  2. go in advanced
  3 set mode Compatible HARD drive / IDE
  4. exit & save changes

  To enter the BIOS F2 press until you initialize (directly after pressing the power key press F2 continiously).

• AppStore does not load just the rotation circle

  AppStore Mac does not load. Just a circle rotation. Any suggestions please?

  Hi DarkHuntress,

  I see that your Mac has problems with the connection to the Mac App Store.  For assistance with this issue, I would like you to please follow the steps in troubleshooting provided in the link below.

  If you cannot connect to the iTunes Store on your computer, a software conflict or Internet services (ISP) provider may block your access. The following steps can help you solve the problem.

  Mac

  • Make sure you have the latest versions of iTunes and Safari.
  • If you have a firewall, your settings could prevent you to connect to the iTunes Store. Learn how to set up your firewall.
  • Connection problems are sometimes caused by keychain issues. S.o.s. Keychain allows you to reset your keychain.
  • If you see a specific error message, get more help with the question of fixing.

  If there is still a problem after trying the above steps, contact your Internet service provider and confirm these ports and servers are enabled for your network.

  If you cannot connect to the iTunes Store

  Take care.

• HP Slate 7 does not load (is the feeder at fault?)

  My HP Slate 7 does not load. I use a USB 2.0 cable. Y at - it a specific cable I need to buy?

  krishnap93 wrote:

  My HP Slate 7 does not load. I use a USB 2.0 cable. Y at - it a specific cable I need to buy?

  Hello and welcome to the HP support community!

  "Slate 7" refers over a dozen different models of Tablet making HP.  Could just you for us and give the exact model number?

  There are a lot of posts on this section on pricing 7 2800 slate developing issues that appear to be associated with a connection of USB port broken on the tablet itself.  If it's your Tablet model, it could be the source of the problem.

  The charger cable is pretty standard - basically any micro-USB cable should work.  I used different those of cell phones with success.

  The transformer in charge must be some capacity - 2 000 my (2 Amps).  If you use a smaller, which could also be a problem.

  If the charger and original cable do not work with the Tablet, but it works on a phone, cell phone or another Tablet, I would suggest contacting HP on a repair/replacement.

  To contact HP directly, click on this link: http://h22207.www2.hp.com/us-en/contact-hp/
  Outside the U.S.: http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  WyreNut

• User profile does not load correctly, the user could not be connected.

  I tried to login to my account to administrator with my correct password and it says "user profile can be connected, user profile does not load correctly ' or something to that effect. Even when I login as a guest and enter my admin password on the user accounts settings and click ok, it won't let me access or modify accounts. Please help me, I am not able to access one of my documents or pictures of my guest account.

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• I have photoshop elements 13 on disc, but for some reason, it does not load on the new computer with windows 10 can you help me?

  I have photoshop elements 13, but it does not load on my new computer with windows 10 can help you?

  Copy the contents of the drive in a desktop folder and install from this directory.

  If this fails, explain what you see while trying to install.

• Hello!  I can't connect to the Adobe Story.  It does not load.  The loading screen guard just goes and goes.

  Have tried for hours now and nothing happens.  Does not load.  Can you help me?

  
  Thank you!!

  Hello

  Can you please try upgrading your version of flash player? Who could help

  You can get the latest from http://get.adobe.com/flashplayer