Project invoices are not created after income project is done.

Similar Questions

• "The service user profile Service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I had the same problem.  Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked.  Then I reinforced to the back and looked at the whole picture.  It turns out that it wasn't a computer after all problem but a question of the user.  Under folder C:/users/default in the end I managed to delete all subfolders except appdata.  So when you went to create a new user he could not find the correct files to copy to the new profile to store information in.  To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine.  Of course I could create my comments and new users account once again.  Finally.

• My settings in windows are not saved after each stop

  Hi guys, I'm under 64-bit Windows 8. My settings are not saved after each stop, every time I start it tells me that I just installed Avast and IE is my browser by default when I chose Chrome previously. Arrangement of icons in my desktop reset after every start. Reliability Monitor shows that I have a lot of problems "Windows was not properly shut down", even if I stop my office in good and due form. Help, please.

  Hi Kelvin,

  Here are a few steps more you can follow:

  Step 1:

  I suggest you to activate the built Admin account.

  (a) press Windows and x key together on your desktop screen.
  (b) click on prompt (admin).
  (c) type: net user administrator /active: Yes

  Note: Follow the same steps and type net user administrator /active: no to disable the administrator account after the diagnosis is made

  After activating the administrator built-in, please try the steps below:

  Step 2:

  The built in Administrator account to create a new user account and transfer the profile data.

  Please follow the steps below to do so:

  (a) press Windows and x together and select Windows Explorer.

  angle b) click on the tab and click Options at the top right.

  (c) click the View tab, and then click on display the drives, folders and hidden files.

  (d) uncheck the box that says Hide protected operating system files.
  (e) click Yes to confirm, and then click on OK.

  (f) to find the C:\Users\Old_Username folder, where C is the drive on which Windows is installed, and the old username is the name of the profile you want to copy the files.

  (g), select all files and folders in this folder, except the following files:

  Ntuser.dat
  Ntuser.dat.log
  Ntuser.ini

  (h) right click and select copy.

  (i) find the C:\Users\New_Username folder, where C is the drive on which Windows is installed, and the new username is the name of the new user profile you created.

  (j) right click in the folder and select Paste.

  (k) restart your PC and check if the problem persists.

  Thank you.

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• typed letters are not visible after the end of the custom field in editfield

  class CustomEditField extends EditField {}

  CustomEditField (String text) {}

  Super("",Text);

  }

  public void layout (int width, int height) {}

  Super.Layout (getPreferredWidth (), getPreferredHeight ());

  setExtent (getPreferredWidth (), getPreferredHeight ());

  }

  public int getPreferredHeight() {}

  Return super.getPreferredHeight ();

  }

  public int getPreferredWidth() {}

  return (Display.getWidth () * 2/3);

  }

  }

  It's my edit custom field.

  When I type on this field and reached end of the field, can't see the letters after that, but I can type (the only thing is to type letters are not visible after the end of the field)

  What is the solution

  I'm sure that you must explicitly enable scrolling. See Manager javadocs.

  In addition, you limit the scope of your field, which may also fail to scroll.

• ID of the IOM PS3 application are not created sequentially.

  ID of the IOM PS3 application are not created sequentially.

  For example: If one raises a request and lets say I request as 3001 id, next time I'd get request id 4500.

  Pointers to solve this problem.

  The values are not random. There is a sequence on the table of the application value and configuration will define how a pool of numbers, he seized every time using the keys of the application. Check the configuration of database for this and then change the size of the pool.

  -Kevin

• CF 11 Enterprise multiple instances are not created correctly with a separate service account.

  The company that multiple instances are not created correctly with a separate service account.

  The questions that I have are very similar to the issues identified in the link below.

  https://forums.Adobe.com/message/6584848#6584848

  My company of 11 CF will not create additional services for my sites of cold fusion beyond the initial service created during the installation process. My problems are compounded because when I try and uninstall the CF11 Uninstalling application crashes and generates the error below. I now have to try to manually uninstall to reinstall CF11. Any help or suggestion to get the problem solved is welcome.

  Description:

  A problem caused this program blocking interact with Windows.

  Signature of the problem:

  Problem event name: AppHangB1

  Application name: javaw.exe

  Application version: 7.0.510.13

  Application timestamp: 52b25e38

  Hang Signature: 0967

  Hanging Type: 6144

  OS version: 6.1.7601.2.1.0.274.10

  Locale ID: 1033

  Signing of additional blocking 1: 09675b5d8f587c9fd57b85cb72e629da

  Signing of additional blocking 2: 2cff

  Signing of additional blocking 3: 2cff32d5db809ac6ce8170a1d7ac1eb0

  Signature of blocking additional 4:0967

  Signing of additional blocking 5: 09675b5d8f587c9fd57b85cb72e629da

  Signing of additional blocking 6: 2cff

  Signing of additional blocking 7: 2cff32d5db809ac6ce8170a1d7ac1eb0

  I solved the problem with the implementation of Cold Fusion 11. I had to disable Windows server 2008 R2 UAC for all users in order to complete the installation with IIS as a web server. This also solves the problem with the inability to uninstall Cold Fusion.

• View 5.2 - pools are not created until after restarting the service

  I'm having a problem from the point of view 5.2 where we create a pool (Win7/XP anyone) and after you click on finish, the pool never fills with VM, vCenter never shows something else that the folder being created. If you view the 'events' tab in the real pool, it shows that the VM delete no VM or replicas are created in vcenter or view. However, if you restart the login server service, the pool will begin and starts to create virtual machines without any problem. Only the first pool, we created worked, each pool created after had to have restarted service to create virtual machines. We can repeat it constantly. See attached picture for what we see in the events tab.

  The DB was out of sync so we ended up uninstalling replicas down to a primary and testing which was very good. We then reinstalled the replicas which in turn fixed the database so all is good. Thanks for the reply.

• My fields are not empty after treatment

  Hello
  
  I need your help once again :-)
  I have a few elements of form fields, for example to filter and so on.
  My problem is after the treatment, I coding between... 5.6.7... pages, when I return to my form fields
  the values are my fill yet.
  
  BUT I don't want that... I want the behavior after the page that discusses the fields are empty.
  
  I have the idea that I create a process plsql areas befor... and erase my fields.
  but I think it's just a dirty trick,
  I think the problem is the cache, is that correct?
  How I should change that... that the fields are not filled in time without end.
  
  Thank you

  Hi Markus,.

  Try this (its a feature of apex).

  1. create a new Page process.

  2. Select the Session State option button and click Next.

  3. then select empty the Cache for all items on the page (PageID PageID, PageID)

  4. give the name of this process as "Empty the Cache" and click Next.

  5. Enter the page numbers. separated by comma that you want to clear the cache.

  Hope this will help

  Kind regards
  Shijesh

• HP Dm1 3025DX network controller drivers are not installed after reinstalling windows

  Hello

  I have a laptop HP Dm1-3025DX Windows 7 home premium 64 GB and after reinstall windows from the network controller and Ethernet controller both say the drivers for the device are not installed. I can't understand how to solve this problem or download either. I don't have access to the internet on this computer so I use another computer for this post, and I'll have to use this computer to download drivers also. Help, please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100668-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102448-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90955-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  Judging people, see if they install.

• USB devices connected through a USB 2.0 Hub Stop Responding and are not recognized after Hub reconnects

  Recently, I have this strange problem where if I connect an additional USB device to one of my USB hubs, some of my devices stop working (especially my keyboard and mouse).

  I have two hubs Generic USB connected to my motherboard. My motherboard is an ASUS Rampage II Extreme X 58 who and chips ICH10. It has 4 USB ports in the front and 6 ports on the rear panel (all USB 2.0). I also have a USB 3 controller card that is connected to one of the PCI-E card to the Board of Directors.  I have the following problems:

  1. Connect a USB device to one of my USB hubs (or one of the USB ports on the front panel) causes some of my devices to stop working (especially my keyboard and mouse that are connected via a USB hub). It seems that crashes of USB controller.  If disconnect and reconnect my HUB, windows does not recognize devices connected to this hub.
  2. Now, after the crash, if unplugging the devices connected to the hub and connect it directly to one of the ports on the front or the back of the computer, Windows instantly recognizes!

  Now I'm confused what is the cause of this problem. I had the same computer since the release of the i7 and X 58 and never had this problem (although I don't remember if I used USB hubs right there).

  Why Windows to recognise the devices connected to the hub at the beginning, but not after the crash?

  Why USB devices stop working when I connect to another USB device on my computer?

  And how do I solve this problem?

  AK

  Just a thought by the way.  If the hubs are not powered you can cause the + 5V due to the excessive number of devices not powered up to a point where it causes accidents and able to resume.

  Reduce the number of UN powered can solve this problem,

• all the Manager are not open after clone r12.1

  Hi expert,

  I have clone of database on a new server from prod. database is in place, the application is in place for the backend. When demand de./adstrtall.sh all services are normally don't start no error/warning back. but when I check the Manager

  ps - ef | grep FNDLIBR

  He returned only 5 lines that show all the Manager are not started. and one thing more when I access the PC customer request the application is not open.

  Please suggest me what I can do to check any type of error.

  I check all the quick logfile clone basic data and application but not found any type of error.

  AutoConfig successfully completed level database and application.

  OS - rhel 5.7 (test server)

  EBS r12.1

  OS - rhel 5.3 (prod server)

  Thanks and greetings

  pritesh Rodriguez

  the question is sloved by the following steps.

  1. in my case, the firewall is turned on then I m unable to access ebs application in the browser. so turn off the firewall on the server.

  2. in the-> simultaneous set I check every manager and change the host name of the server test (instead of host name of server prod). After eating this all is implemented successfully and works very well...

  Thank you & best regards

  pritesh Rodriguez

• Forms are not opening after modernization in JRE6 Jinitiator to 11.

  Hello
  
  I just upgraded from jinitiator to JRE 1.6_37 following the note Metalink (deployment Sun JRE (Native plug-ins) for Windows customers in Oracle E-Business Suite 11i [290807.1 ID])
  
  However, the forms are not open now.
  
  Get error in Java Console below.
  
  java.lang.AbstractMethodError: oracle.forms.handler.TextFieldItem.getApplet () Loracle, forms, motor, hand;
  at oracle.forms.ui.VTextField.init (unknown Source)
  at oracle.forms.handler.UICommon.instantiate (unknown Source)
  at oracle.forms.handler.UICommon.onCreate (unknown Source)
  at oracle.forms.handler.TextFieldItem.onCreate (unknown Source)
  at oracle.forms.engine.Runform.onCreateHandler (unknown Source)
  at oracle.forms.engine.Runform.processMessage (unknown Source)
  at oracle.forms.engine.Runform.processSet (unknown Source)
  at oracle.forms.engine.Runform.onMessageReal (unknown Source)
  at oracle.forms.engine.Runform.sendDeferredMessages (unknown Source)
  at oracle.forms.engine.Runform.onMessage (unknown Source)
  at oracle.forms.engine.Runform.sendInitialMessage (unknown Source)
  at oracle.forms.engine.Runform.startRunform (unknown Source)
  at oracle.forms.engine.Main.createRunform (unknown Source)
  at oracle.forms.engine.Main.start (unknown Source)
  at sun.applet.AppletPanel.run (unknown Source)
  at java.lang.Thread.run (unknown Source)
  
  I upgraded to developer 6i patch_set 19.
  
  Please let me know if I missed something.
  
  Regrads,
  Sourabh

  Please see (how to overcome Stack Traces after Sun JRE Java and developer fixes Group 19 implementation? [ID] 1261565.1).

  Thank you
  Hussein

• SuSE 11.0: VMware process are not started after the system startup

  Hello

  Suddenly, I have the problem, that after restarting my computer (SuSE 11.0, 64-bit) host VMware and VMnet services are not started. After you run the command "/etc/init.d/vmware restart" everything is fine - until the next reboot. I don't have any idea what caused this. I also run /usr/bin/vmware-config.pl once again, but he has just helped until the next reboot.

  What can I do to get these VMware processes started automatically with the system startup, please?

  Best regards

  Chaoshacker

  Set:

  RUN_PARALLEL="no"
  

  in/etc/sysconfig/boot

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Descriptions of invoice are not transported to GL

  Hello
  
  In our R11 Description of the AP invoice are transported to GL when we execute the transfer of accounts payable for GL.
  
  But in R12, im wondering why is - what the Description of the Bill that we had in the Module payables are copied is no longer in the Description for the GL Journal column. Instead, he showed "Journal import created".
  
  How can I make the GL copy Description of the AP invoice when I run the transfer of GL Journal entries?
  
  Thank you
  
  emgee

  Hello emgee,.

  Please check your Configuration of accounting.

  Please follow this Navigation:

  Accounting * (N) > Financials > Accounting Manager > accounting configurations *.

  -Request for the light used
  -Choose update accounting Options
  -Update the subledger accounting Options
  -Under Applications: Payable, choose The Options of accounting update
  -On the field of the Accounting General Journal entry summary , choose No. Summarization