Properties of the slide does not

Similar Questions

• Cannot open the slider does not work

  This morning went to open: button operated as well as the indication was slipping so I could enter my code; However, he wouldn't drag. I tried to close and icon came indicating had slipped at the stop and who wouldn't. In other words no recognition attempt to operate by touch.

  Hello Robert,.

  Sorry to hear that your iPad is unresponsive to the touch. Return to what you can do to get this working.

  At any time you have problems with touch on your iPad, see Troubleshooting below. It should take care of everything, but in case it does not work, you want to contact the Apple Support for assistance.

  Check your touch screen

  Make sure your hands are clean and dry, then try the following steps:

  1. If you have a case or a protective screen on your device, try removing it.
  2. Clean the screen with a soft, slightly damp, lint cloth.
  3. Unplug your unit.
  4. Restart your device. If you are unable to restart it, you can force restart your device.

  If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

  If the screen of your iPhone, iPad or iPod touch does not respond to touch
  https://support.Apple.com/en-us/HT201406

  Take care

• That gray box that indicates the volume (not the slider) does not, either made the caps lock notification.

  I don't know what it's called, or I would have probably been able to know how to solve this problem, already, but this is the box that appears momentarily on the screen when I press the volume buttons; It does not appear.  Also when lock shift was there was (before my relocation at all, I think) was a notification similar to the volume box that is not displayed.  I thought that these two things might be related, so I wonder about the two.  Thank you.

  MichiCat,

  It is likely that you have not installed a software suite that came with your computer because these are 3rd party features.
  You must contact the manufacturer of your system for the drivers and the software or if you need assistance you can to your system and model and we will do the best to help you made in the right direction.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to activate my Windows 7 OS when the properties of the computer does not open?

  How to activate my windows operating system 7 and the properties of my computer is not open how to open that

  Original title: activate windows

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Cp6 - Bug? Definition of the name of the slide does not always work

  At first I thought that I made a mistake when I noticed that the slide name did not (and returned to the default value or anything that was already there).

  I learned that I should click outside the name box to 'set' the name of the slide. However, I now notice that set a name for the slide doesn't always work, despite all efforts.

  To get a name of the slide to 'stick', sometimes I have to click on another slide, then go back and repeat the steps.

  Everyone has noticed this in 6 Captivate?

  Is - more coherent if you change the label of the slide, and then press ENTER.

• Cannot make changes to the properties of the taskbar - does not

  Win XP Home-SP3-SafetySkan and DiskRepair were unnecessary run-help.

  Cannot make changes in task bar accessories. Most irritating: can't keep its shortcut icon on the bar. Not preloaded operating system so no manual. Thanks in advance.

  Hello

  • What were the changes made before the issue started?

  You can view these methods:

  Method 1:

  I suggest you to check the question in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2:

  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

• I want to know the reasons for the slide does not

  I just got my new ink & slide for my mini iPad 4. Ink works very well. Slide ringing. My setting in Adobe Draw is 1) turn on the palm rejection; slide 2) enable.

  Can any-staff Adobe could help me to find out why:

  1. is this a common problem? If not, mine must be broken. If so, then:

  2. are there specific settings that I need to do as part of the iOS? In the affirmative, please help me to find. If not, then:

  3. the device is compatible with iPad mini 4? Your site Internet says it's compatible with the mini and mini iPad iPad with retina display.

  Someone please reach out for help.

  There is no service customer phone or e-mail on this device. Direct customers without problem on a forum is not a good solution for a company to do.

  Hi there, may!

  I'm really sorry for this frustrating experience. My guess is this slide is having a difficult time with the smaller surface area on the iPad mini. That being said, I don't know of specific with compatibility issues or bugs for this model of iPad. Please contact Adonit at [email protected] as they provide support for this hardware.

  Thank you and please post again,

  -Kathleen

• Object on the slide does not appear on the slide in view film strip.

  Hello, I have a problem with one of the quiz button holder place on my quiz results slide.  The "publish the results" button is on the model of slides, but when I check my project this button is missing on the quiz results slide in the Filmstrip view.  I tried to reset only the master slide and who did not.  Any ideas why this happens?  Thank you!

  Fix.  The Post results button will not appear unless you were really using the Server internal option, NOT of publication for one of the SCORM LMS options.

• My Ipad 2 does not recognize anyones tap/fingertips. The slide will not work, I can not turn off course because you need to slide once again to confirm. Need help!

  My Ipad 2 won't let me not unlock the screen does not to fingerprints

  Have you tried a soft-reset/reboot? Press and hold sleep and home for 10-15 seconds (ignore the "slide to turn off"), after which the Apple logo should appear and it should restart

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• By clicking on "remove properties and personal information" does not open the dialog box 'properties to remove.

  Hi all!  I'm new here.  Hope someone could help me with my problem.  I'm using Windows 7 Home Basic x 64.

  For any file that I did a right click to view properties--> select Details tab--> click on "remove properties and personal information. I do not see the Remove Properties dialog box will appear. Instead, refreshes just the Properties window. I restarted my laptop already, but the bug does not go far.  Tried to ask for help from my laptop to the manufacturer and they told me to reinstall the OS, I did.  But the bug is still there.

  Could this be something to do with my registry?  Tried searching solutions in other forums / Speakup, but found none.  Would really appreciate your help.  :)

  Right, I've now solved my problem.  Somehow, obtained data stripped of these two keys:

  HKEY_CLASSES_ROOT\ * \shell\removeproperties
  HKEY_CLASSES_ROOT\ * \shell\removeproperties\DropTarget
  Those who have problems with the "Remove properties" dialog box might try to check these keys, which must contain the following data:
   

  [HKEY_CLASSES_ROOT\ * \shell\removeproperties]

  "ProgrammaticAccessOnly"="Apartment".

   

  [HKEY_CLASSES_ROOT\ * \shell\removeproperties\DropTarget]

  "CLSID" = "{09a28848-0e97-4cef-b950-cea037161155}".

• Camera slider bug? When I press 'C' the cursor of the camera does not instantly change on the screen. Why?

  When I press 'C' the cursor of the camera does not instantly change on the screen,

  only after that I moved my mouse t - it change. Why is this?

  This is fixed in the 2014.2 effects after update (13.2), which is now available.

  Details here: http://adobe.ly/1IVopxh

• The mouse does not work on my new Satellite L750/L755

  Hello world

  I bought a toshiba Satellite L750/L755 but the mouse does not work, I have no control on it that if I use an external mouse, while I have put pressure on the touchpad.
  I tried the following options:
  I updated the driver - I changed the operating system

  but nothing, still the same problem. Next laptop will be a Mac for sure.

  I look forward to hear from you

  Daniele

  Hello Daniele

  It's really strange that the touchpad does not work even if you have installed the right driver and installed the operating system again. At the first moment, we can say there is probably a hardware problem, but please be sure touchpad is listed in the Device Manager and also active correctly (FN keys).

  Check it please all the properties of the mouse.

• I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  If you have any documents open in Keynote 5 then you will not be able to drag it to your Dock. IF a right-(control) - click the Keynote icon 5 shows Quit in the drop - down and then select Exit. Now you should be able to slide your dock.

  It is often necessary to drag it from the dock, drag the icon quite some distance from the dock (to what the REMOVAL appears on the icon).

  You can also right-(control) - click the icon select Options, and then, in select Options remove the dock.

• Look at the calendar does not synchronize

  Sun software is up to date.  Watch couples with the IPhone.  Look at the calendar does not synchronize.

  HI - try the following steps:

  On your iPhone, in the application of the watch, go to: Watch My > calendar > make sure you have selected your preferred settings (mirror my iPhone or Custom).

  On your iPhone, in the application of the watch, go to: Watch My > General > reset > press reset sync data. Nothing appears to happen, but the process will be executed in the background - allow a minute or two.

  It can also help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.