Property is renamed to the opening
Hello
I have a weird problem. I use "Advanced Lightning" and the expression following the Direction (called french "axe") property. Everything works fine, so I save and close the project.
When I open it, the property of "Axe" seems to have been renamed to "Control popup" and so mess up all of my expressions. When I click on the layer and the effect, it goes back on behalf of the normal, but I have to re-enable the expression. I have a LOT of expressions, so is not the solution!
Anyone have any ideas?
Thank you very much
Fred
IM on Windows 7 64-bit after effects CC in french
This is a limitation in all these controls. You must use the index property, i.e. to put a single number without quotes in there.
Mylenium
Tags: After Effects
Similar Questions
-
JavaScript - the opener, property
QUESTION: How does change the code provided below to make it compatible with FireFox?
INTRODUCTION
Three following code sets produce a small window that shows a method appropriate for the citation of information from a Web page. This code has been tested and it works in Opera 9.63 and Safari 3.2.1. For some reason any he does not work in FireFox 3.0.5. Indeed, the information to which the property of the opener serves as reference is not captured by FireFox.
CODE (for window quote - namely, citation.html)
< p > a good way to quote a passage from the text on this page: < /p >
< p >
Stegemann, R. A. 2000. < name > Imagine: fill a historical gap in the Japan < / cite >. < script type = "text/javascript" > document.write (opener.document.title) < /script > [online document] & lt; < script type = "text/javascript" > document.write (opener.location.href) < /script > & gt;
< /p >
< div > < input type = "button" value = "Close window" onclick = "window.close ()" > < / div >
CODE (through the window of the document to be cited)
function openCitationWindow() {}
ciDow = window.open("..) (' / Contents/utility/citation.html ', ' ', 'width = 450 height = 175, top = 300, left = 300');
ciDow.focus ();
}
CODE (to quote the link in the document window)
< a href = "" onclick = "openCitationWindow ()" > quote < /a > "
ANSWER: This problem goes away when the HTML document used to test him model DW is an HTML document in his own name and not created by the command preview of DW. In short, there is nothing wrong with the code; It works very well in normal conditions. Simply, FireFox does not have the HTML document that is created by the command preview of DW in the same as Safari and Opera don't.
LATE SOLUTION: I apologize for coming to this problem so late, but I was pushing a very pernicious flu bug.
Roddy
-
The Title property is showing instead the name of file at the top of the app bar
We need to rename a series of files from their original name of a new name. After you rename the files in Windows (BRU000003. PDF in the example above), we open one of the files in Adobe Acrobat format. We were surprised to find that the 'name' is displayed in the bar at the top of the application window was title property (000010.pdf in the example above) and not the file name.
Is it possible to programmatically delete the Title property or Adobe Acrobat to display the name of the file and not the title property?
You can change this in the properties of the document. Look at the "Initial view" tab.
-
Can someone tell me how do you remove or change the name of a library on the opening?
Can someone tell me how do you remove or change the name of a library on the opening?
You remove an Aperture library by selecting it in the Finder and delete it like any other file.
To rename an opening, library, use the Finder-click on the name of the library and enter a differnet name. You can also select the library in the Finder, then enter the ⌘I key combination to open the information panel. Then change the name in the Info Panel.
-
Module CVI written TestStand property, property value resets after the step execution.
Hello
I did a lot of research and find nothing relevant to the question that I have. I've created a DLL in CVI containing several functions I call TestStand. I also created a type of step customized for each function call. Every function in the DLL has a runtime version and a version edit-time. Time edition features each have a UI associated with them are called from teststand. Change these functions are placed in the custom under the heading "change" step step-type tab Before executing a sequence with these custom steps the edit-time user interface is launched to allow the user to input values that will be passed to the run function. originally, I tried to set up my functions as a 'post step' step in the step properties. However, the sequences would fail to run because the parameters of the step module was empty. Then, I selected CVI as the adapter in the step properties and specified a default module for each type. This filled the tab module settings step like I wanted. However, when I ran the sequence each function execution of measures was called twice, once for the stage of the post, and once for what was in the tab module I suppose. I then re-entered the types of step and deleted all the steps of the post office. I thought that all the problems have been resolved at this point, however, after doing some more extensive tests I always have a bug, I was unable to get rid of that.
The problem is that two of my step types have to write data to current TestStand to execution after they ask an external device for IT. I know that the query works because my log text that generates the DLL displays the correct values. However, the data are not get rewritten on TestStand correctly. In the enforcement functions after checking the valid data has been returned, I try to write to TestStand using: "TS_PropertySetValNumber (seqContextCVI, NULL,"ThisContext.Step.ParameterValue.NumericParameter", 0, (double) ushortint);" »
I checked that this call generates an error and also used the TS_PropertyExists method to check that I had the correct search string. These extract so I added then another command that reads the value written to TestStand two return immediately after to write it. I printed this in my log file and found that the value is written to the property of TS. So, the problem is that TestStand is defining the property to reset after the code module is running. How to prevent this?
Thanks for all comments, let me know if anything specified needs.
Josh Meyer
Well, I came to the conclusion that my 'problem' is not really a problem. I had a bit of a basic misunderstanding of the works of TestStand (I don't actually use it, I am writing just a code which will bring an existing one of the tools of the features inside the TS).
in any case, what I learned is that these properties are retained (so you can set up a sequence, save it, re - open and be able to run it without any reconfiguration for example), when you write to a property when installing editting/sequence. The run time values are not preserved (if connected) because they are only required to carry out. For example, if a user calls one of these functions to extract value from a controller, they probably do so because they want to check the value, it's what they expect it to be. Rather than watching the value after execution (which is what I me assuming they would do), they would set up the step after step "read value" to test the value that it returned. This value is available in 'RunState.PreviousStep.valuename' in the downloaded step step "read value".
Hope that I did not confuse anyone a lot, I'm completely new to TestStand.
-
Impossible to rename all the files on my desktop
Hello
When I create a new folder on my desktop and rename it, the name does not change and it remains as 'new folder '. When I go into the properties of the particular folder box 'read only' is a blue square. So when I try and turn off the blue box is clear, it stays on and it will not turn off.
I am the administrator and I have full control of the folder according to the scutiry tab in the Properties menu. I am running Windows Vista Home Premium with a 200 GB hard drive and 3 GB of RAM and a processor clocked at 2.66 ghz.
Any help would be appreciated since I tried other responses on various forums and am no - where.
Thank youSooty1892,
I'd like to experience for me to better understand the potential cause for what you are experiencing.
What we will do is create a new folder in your user profile directory and test the availability of renaming.
We also create a folder on your desktop and attempt to appropriate to see if we can then rename it.
Here are the steps to do this:
Click Start-> click on your username at the top right of the menu.
In the new window, click on organize-> then new folder
Check your ability to rename.
From there, double-click the desktop folder.
Take the same steps to create a new folder, test the name change.
Then, on an issue that you cannot rename, test this procedure:
To take ownership of a folder:
Right-click the folder for which you want to set permissions, click Properties and then click the Security tab.
Click Advanced to open the security settings advanced for the dialog box
-
Windows that display progress on delete, move, or rename files remain open
Original title: remove the window remains open.
Windows Vista indicate the status on deletion, move, or rename files remain open, even if the operations are completed. I have to shut them down in the Task Manager. All the patches? Thank you.
Hi bobes42,
See the article next to the Intel site:
I hope this helps!
-
How to stop the open a popup when I click on an icon. I want the icon to do its job.
How to stop the open a popup when I click on an icon. I want just the icon to do its job and open the file. However, I get the crazy popup indicating to choose the program you want to open the file.
When we first got it it has always opened when a user has clicked on an icon. Then he started doing this several months ago, and I don't know why.
Please help if you know how to beat this computer.
Windows Vista Home Edition
CEHHello
There are MANY varieties of the latter with a lot of names, but all can be removed with the
same methods:
are rogue antivirus, scams to get you to pay for them while they have no advantage at all.How to remove all THE varieties of this malware - please read carefully the removal Instructions.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
in the regular when windows you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
UnHackMe execution)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeRun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
-
All I'm trying to open the files immediately through the "open with" window
Here's what I think happened, I downloaded Irfanview and since all the files, I try to open the "open with" box comes up. Also missing from the sidebar. I deleted the Irfanview thought that would fix, but it didn't, so I tried to reload to see if I could find the problem but couldn't find that open with the program to use to bring it back.
Hello
See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.
Try Mode safe mode with networking - repeatedly, press F8 that you start.
The best two methods allow scanners to run and/or AV.exe out of the way or removing.
1.
CTRL SHIFT ESC - task manager OR right click on the taskbar - task managerProcess tab - complete the process on AV. EXE and continue with the uninstall Guide.
If necessary use start - computer or Windows Explorer to navigate to
C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
is installed.Right-click on it and rename it to ZZMbam.COM (or something different than now), then
Double-click it and run it like this. You can rename it back later. Do the same with others
programs as needed. Use this method for other necessary - DO NOT ASSUMER one
program removes all or that there is no other malware.---------------------------------------------------
2.
Another method is to use them:Use Process Explorer to "Suspend" the process will not stop
Then use AutoRuns to delete the malicious program startup items.
Now use UnLocker to delete the files in the malware.
You may need to do a file at a time.
Process Explorer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoRuns - free
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxUnLocker - free (do not install the adaware Ebay)
http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtmlAV.exe
==============================================
There are MANY varieties of these with many names, but all can be eliminated with the same methods:
Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
scams to get you to pay for them while they have no advantage at all.How to remove all THE varieties of this malware - please read carefully the removal Instructions.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
in the regular when windows you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
UnHackMe execution)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
How to COPY a BACKUP as the... CONTROLFILE can be used for the OPEN database
I create a document such as a "How To" to move a position for a Junior DBA controlfile.
But it seems that I'm the Junior because I am facing the following...
Action plan:
Move/rename a Controlfile
Version of the database: 11.2.0.3
Controlfiles moving of:
/ goldengate/ORCL/ORADATA /.
TO:
/ GoldenGate/ORCL/controlfile
Step 1: Set up environment variables
$> export ORACLE_SID = ORCL1
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
$> echo $ORACLE_SID
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ORCL1
$> export ORACLE_BASE = / u01/app/oracle
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
$> echo $ORACLE_BASE
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
/ u01/app/Oracle
$> export ORACLE_HOME=$ORACLE_BASE/product/11.2.0.3/dbhome_1
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
$ echo $ORACLE_HOME
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
/U01/app/Oracle/product/11.2.0.3/dbhome_1
Step 2: Check control_files parameter
$> echo "see THE PARAMETER control_files | sqlplus-s "virtue sysdba".
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
control_files string/goldengate/ORCL/ORADATA/control
ol01. CTL, / goldengate/ORCL/ORA
DATA/control02.ctl
Step 3: Closing the open database
$> echo 'SHUTDOWN IMMEDIATE'; | sqlplus-s "virtue sysdba".
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The database is closed.
The database is dismounted.
ORACLE instance stops.
Step 4: Editing of the database
$> echo "STARTUP MOUNT"; | sqlplus-s "virtue sysdba".
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ORACLE instance started.
Total System Global Area 4275781632 bytes
Bytes of size 2235208 fixed
822084792 variable size bytes
3439329280 of database buffers bytes
Redo buffers 12132352 bytes
Mounted database.
Step 5: Creating a copy of the current controlfile
$> echo "AS BACKUP COPY CURRENT CONTROLFILE FORMAT ' / goldengate/ORCL/CONTROLFILE/control01.copy.ctl'; ' | RMAN target / nocatalog
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Recovery Manager: release 11.2.0.3.0 - Production Fri Oct 22 17:03:27 2015
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: ORCL (DBID = 1420762587, is not open)
using the control file of the target instead of recovery catalog database
RMAN >
From 22 October 15 backup
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 58 type of device = DISK
channel ORA_DISK_1: from data file copy
copy the current control file
tag name=/goldengate/ORCL/CONTROLFILE/control01.copy.ctl output file = RECID = 1 STAMP = 893783011 TAG20151022T170329
channel ORA_DISK_1: datafile copy complete, duration: 00:00:03
Backup finished at 22 October 15
RMAN >
Complete recovery manager.
Step 6: Change of parameter control_files
$> echo "ALTER SYSTEM SET control_files='/goldengate/ORCL/CONTROLFILE/control01.copy.ctl' SCOPE = SPFILE;" | sqlplus-s "virtue sysdba".
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Modified system.
Step 7: Closing of the mounted database
$> echo 'SHUTDOWN IMMEDIATE'; | sqlplus-s "virtue sysdba".
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ORA-01109: database is not open
The database is dismounted.
ORACLE instance stops.
Step 8: Installation of the database
$> echo "STARTUP MOUNT"; | sqlplus-s "virtue sysdba".
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ORACLE instance started.
Total System Global Area 4275781632 bytes
Bytes of size 2235208 fixed
822084792 variable size bytes
3439329280 of database buffers bytes
Redo buffers 12132352 bytes
Mounted database.
Step 9: Check control_files parameter
$> echo "see THE PARAMETER control_files | sqlplus-s "virtue sysdba".
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
control_files string/goldengate/ORCL/CONTROLFILE/c
ontrol01. Copy.CTL
Step 10: Open the mounted database
$> echo "ALTER DATABASE OPEN"; | sqlplus-s "virtue sysdba".
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ALTER DATABASE OPEN
*
ERROR on line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option of database open
$> echo "ALTER DATABASE OPEN NORESETLOGS"; | sqlplus-s "virtue sysdba".
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ALTER DATABASE OPEN NORESETLOGS
*
ERROR on line 1:
ORA-01610: recovery using BACKUP CONTROLFILE option must be
Then...
$> sqlplus/nolog
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SQL * more: Production release 11.2.0.3.0 the game Oct 22 17:14:43 2015
Copyright (c) 1982, 2011, Oracle. All rights reserved.
SQL > CONNECT sysdba virtue
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Connected.
SQL > RECOVER DATABASE with the HELP of BACKUP CONTROLFILE until CANCEL;
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ORA-00279: change 621941 September at 22/10/2015 16:57:33 needed to screw 1
ORA-00289: suggestion:
/U01/app/Oracle/product/11.2.0.3/dbhome_1/DBS/arch1_11_892981851.dbf
ORA-00280: change 621941 thread 1 is in sequence #11
Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
Cancel
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Cancelled media recovery.
SQL > ALTER DATABASE OPEN;
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ALTER DATABASE OPEN
*
ERROR on line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option of database open
Issues related to the:
What am I misunderstanding? BACKUP COPY THAT isn't really a COPY.
Why I can't use the 'copy' of the controlfile created by RMAN?
Note:
If I just copy the controlfile to the new location when the database shuts down everything works fine.
Thanks in advance.
Juan M
It is also mentioned in https://docs.oracle.com/cd/E11882_01/server.112/e25494/control.htm#ADMIN11288
Create additional Copies, rename and move the control files
-
CS6 inDesign crashing on the opening, works on the different user account, help?
Hello!
I use InDesign everyday, had my Macbook since September and have had no problems with the opening of the program at all until about 2 weeks ago. It appears with the graphics of opening with all the license information, and 5 seconds later, a window opens saying "InDesign quit unexpectedly", as well as loads of text on the threads, frames and the rest. (A copy of the text is available to InDesign Crash Info - Pastebin.com , in case where anyone can somehow choose something from that!)
I tried to reset all my preferences and reinstall all of the CS6. I also had a problem with the fonts in the past, so I have deleted all my additional fonts and just now the default fonts library. The only way I could make it work is by setting up a different user account, and now it opens properly, but only when using this account. It's just a pain the * having to keep switching between user accounts all the time! I didn't know if there would be a quick solution to this, rather than having to transfer all my files, preferences etc. from one account to another and basically a new account from scratch.
Any help would be great appreciated.
Thank you
According to the accident report, you must always update InDesign to the latest patch (8.0.2 for a perpetual license, 8.1 for the subscription).
If that alone is not enough, delete or rename the files of two preference from your old account (see replace your preferences for where to find them) and copy the same folders on the new account.
-
How to disclose a tree inside a page fragment of the workflow on the opening
Hello
I use JDeveloper 11 g 11.1.2.1
I have the taskflow with the inside page fragment. This page fragment inside a tree there.
I need to disclose this tree on the opening page.
I know how to disclose the tree, but what place I could call the method for disclosing this tree?
It is possible to use BeforePhase of f: view of the jsf page, but I use page fragments.
AnatoliiHello
You can use EL pointing to a bean managed to control the State to disclose the tree. The managed bean should be available during the initialization of the workflow (there is a property initializer is called before the first view renders). You can then use the initializer to set the desired tree open State
Frank
-
Write the keywords of the open image
Hello
The "Photoshop JavaScript reference" document says the document.info.keywords is a read/write property.
I've opened an image in Photoshop which has 2 keywords. I can read it normally, but it seems that I can't write or delete these keywords
I need to delete all the current keywords and add just one called 'Treaty '. I m try:
var doc = app.activeDocument
var k = "Processed."
doc.info.Keywords = doc.info.keywords.splice (0, doc.info.keywords.length)
doc.info.Keywords [0] = k
He gets no errors but does nothing :/
What Miss me?
Thank you very much
Gustavo.
It work?
var doc = app.activeDocument; var k = "Processed"; doc.info.keywords = [k];
-
SmartView when the file opens the open connection manager
I created a macro in smartview that will create an ad hoc network, but the macro will not work unless you are connected to a server. Is it possible to label an excel file to perform the connection manager pop up when a particular file is opened? I know that there are codes that you can put in the macro that will automatically connect you but a lot of people will use this file and I want to make it dynamic.
Is there a feature that indicates if the user connected, do not ask to connect?
JohnIn my previous post, I have an example on how to set the user name and password as variables, which means that each user will have to enter their user name and password before you continue, you're not going to set the username and password in your code. In other words, your Sercurity settings will determine whether or not they see data.
If you are familiar with UserForms, you can override the Method (in my example) INPUTBOX with your small form and set the passwordChar property has * to hide the password to users from prying eyes. Do not forget to set this "Macro" in the event "workbook opened." This should solve your problem. -
Why Mac Pro is slow at the opening of the apps?
Compare to the other mac, my mac pro is so slow at the opening of the apps and any other use. Memory is 4 GB and still half store is available. This place since the case open. But other Mac that we have in the House so different from mine. Should I call it Karma? Next to no where my CD player does not read any CD more. If original or a cheap it is not serious. Additionally CDs can only release by restarting my mac.
Mac Pro 13 inch Mid 2012
I5 2.5 GHz
4G
Macintosh HD
CPWMJ7Y5DTY3
500 G (280 G available storage) storage
Should I upgrade my ram from 8 G to get faster in opening applications, using Microsoft Office, gaming, etc.?
Should I change my CD player? (If I have it is so so so expensive being honest).
Tin
Run and view the results here so that we know more about your configuration.
https://discussions.Apple.com/docs/doc-6172
This is the Office Mac Pro forum. You have a MacBook Pro
Maybe you are looking for
-
How much time does it take for my ipod to connect the itune after putting in disc mode?
How much time does it take for my ipod to connect the itune after putting in disc mode? my ipod displays 'do not disconnect' for half an hour already, but my itune cannot always detect my ipod (as itune will pop up once I have connected my ipod norma
-
Is a solution for January 1, 1970 in the iphone?
Some maliciuos colleague told me that tha change my date and restarting my iphone updates a new iOS..., there a solution?
-
I can't connect the sender to distance chart
I put my ip and reconidezed adrees but tat said unable to connect and is for me to see is available in my network or is listed as public. What do I do? ):
-
Acquire the values only when the digital output is high.
Hello I work with test of transistor, whose door is controlled by the digital release of USB6289, related to BNC2120. Test plan: Door 1.transistor is enabled for 5seconds, with P0.0 for example 2. then, everything remains off for 1secondes. 3.p0.1 is
-
acquisition of ICP data and signal processing controller
What is the devil? What is the specific driver I need? The drivers only I don't have installing is USB 3.0. There is none is available for windows 10 and I tried to install the version of windows 7 in compatibility mode, but it has not installed beca