PROPERTYEDITORSOURCE - Get the delimiter used for the PointSize property

Similar Questions

• Get the page property top of page on the navigation stack

  Hello world

  I have a navigation stack, and I push pages top (sometimes even several times the same page, just with a different content)

  The pages are custom pages

  Now I have the problem that I need to get a specific page in the foreground property, and the property must be referenced from the navigation pane

  so my code that looks like this:

  //****************
  //***CustomPage.qml
  //********
  import bb.cascades 1.2
  Page {
      property variant titleLabel
  
      Container {}
  }
  
  ///This code is in my navigation pane, in a function
  
  var top = navigationPane.top; //top is a custom page, CustomPage
  
  //how to reference top.titleLabel ?
  

  I can't put it, I can't get it. I guess it's because the top is an unknown class . How can I do?

  Ah, the joys of debugging :/

  Found the solution for my problem: restarted Momentics, restarted my debugging device, now it works as expected (and it costs my 3 hours of my life)

  Sorry for the inconvenience

• I don't get the 'clear' property

  I use it, but I don't really understand...

  For example in an id #header. I'll have a floating left logo and navigation floating to the right. I will use a ' clear: both ' in #header if the logo and navigation don't collide or be under the other. It works, but how? Please help me understand this...

  If you have columns (left + right) div and footer div

  Property float are applied to your columns and if you apply a clear both to your footer, it will not allow anything to float left or right (both) to float next to it. This is the main reason why the float property exist.

  It is not a margin or a block. It is just to restore document normal flow of floating elements.

  Second, we can force an element to contain floats (photo for example).

  The best way to understand how it works, is to play with div boxes in a simple XHTML document to see how the elements react with each other.

• How to get the XML property

  I have xml like this (generated by the Web service):

  
  A
  B
  
  

  How can I get the id value in the listview.

  Thank you

  Hi Wibi_okezone,

  It is called attribute.

  You can got id as shown below

  QDomElement e2 = nodeList.at(iDx).toElement();
  map["id"] = e2.attribute("id").toAscii();
  

  --------------------------------------------------------------------------------------------------------------------------------------------

  feel free to press the button like on the right side to thank the user who has helped you.

• How to get the file property

  I need to take action once a file has been modified.

  I donot want the contents of the file to vote all the time. I can't verify ownership of the file modification time.

  Can I know how to do. Thank you.

  If you don't want to make the ballot, then you need to use a reminder. How to do this depends on which operating system you are running, which is...?

  For example, on Windows, you can try to use the Windows API, as FindFirstChangeNotification (good luck with that). You can also use the .NET FileSystemWatcher class. Examples are provided with LabVIEW to show you how to make reminders for .NET. Something like this:

• liked - story Adobe CC asking me to upgrade to get something I use for years?

  This desktop page Adobe Creative Cloud | Adobe Creative Cloud lists Adobe Story more as part of the composition of the creative cloud. I use Story more long under the CC. Now, he calls for an additional amount of $9 per month to use something which is part of the CC?
  What is going on?
  Thank you

  Scott Jenkins

  Scott, I had a similar situation, however, it was linked to the fact that I was in the month to renew my subscription for CC and my credit card (which is debited automatically every month) had insufficient funds in there. Until I updated my payment information on my adobe account, which then triggered Adobe to debit the card even once, notification of update remained. After updating my article of payment on my account, within 24 hours, everything was in order. During this period Adobe Story more had also returned to only Adobe Story (free account) that is afraid that the characteristics of the production.

• How to get stoarge capacity used for Vcc

  Hello

  We received the total and capacity used in vco 4.2.0

  vdc.storageCapacity.allocated;

  vdc.storageCapacity.used;

  but this code does not work in vco 5.1

  It is a new concept in 5.1 of the storage profile that gives us the storage total allocated as

  vdc.getStorageProfiles () .limit [0]

  But how we find the allocated capacity used?

  Thank you

  Here's some of my sample code that you may find useful:

  System.log("============ Provider VDC: "+providerVdc.name+" ============");
  System.log("NOTE: If allocatedMB = 0, then the org vdc has been configured for 'unlimited'");
  var vdcs = providerVdc.getAdminVdcs();
  var host = providerVdc.getHost();
  for each (vdc in vdcs){
   System.log("====== Processing Org VDC: "+vdc.name + " ======");
   var queryService = host.getQueryService();
   var profs = vdc.getStorageProfiles();
   for each (var prof in profs) {
       var expression = new  VclExpression(VclQueryAdminOrgVdcStorageProfileField.HREF,  prof.getReference().href  , VclExpressionType.EQUALS);
       var filter = new VclFilter(expression);
       var params = new VclQueryParams();
       params.setFilter(filter);
       var resultSet = queryService.queryRecords(VclQueryRecordType.ADMINORGVDCSTORAGEPROFILE,params);
  
       while (resultSet != null) {
           var records = resultSet.getRecords(new VclQueryResultAdminOrgVdcStorageProfileRecord);
           //System.log(records.length + " records found");
               for each (var record in records) {
           System.log("Storage Profile Name (usedMB/allocatedMB): " +  record.name + " ("+record.storageUsedMB+"/"+record.storageLimitMB+")");
               }
       resultSet = resultSet.getNextPage();
       }
   }
   System.log("");
  }
  
  // --------------------------- End code Snippet
  Sample output:
  [2013-03-21 12:27:03.553] [I] ============ Provider VDC: pVDC1 ============
  [2013-03-21 12:27:03.554] [I] NOTE: If allocatedMB = 0, then the org vdc has been configured for 'unlimited'
  [2013-03-21 12:27:03.763] [I] ====== Processing Org VDC: demo ======
  [2013-03-21 12:27:03.859] [I] Storage Profile Name (usedMB/allocatedMB): Shared (0/409497)
  [2013-03-21 12:27:03.861] [I]
  [2013-03-21 12:27:03.863] [I] ====== Processing Org VDC: tiny ======
  [2013-03-21 12:27:03.959] [I] Storage Profile Name (usedMB/allocatedMB): Local (1792/6144)
  [2013-03-21 12:27:03.963] [I]
  [2013-03-21 12:27:03.965] [I] ====== Processing Org VDC: CimVDC ======
  [2013-03-21 12:27:04.016] [I] Storage Profile Name (usedMB/allocatedMB): Shared (231680/0)
  [2013-03-21 12:27:04.020] [I]
  

• Get the Block property

  Hi all
  
  You know, how I would get to know if a block of data is in the database or not during execution.
  
  I searched on Get_Block_Property but there is no any parameter that indicates the block database is set to Yes or no.
  
  waiting for your quick return.
  
  Concerning

  Hello

  Test the property of block DML data target name. If the block is based on a table or a view, it returns the name of the table/view.

  tb_name := Get_Block_Property( 'the_block', DML_DATA_TARGET_NAME );
  

  François

• How to get the value of a component within a Repeater using the identifier of the component?

  Hello I am on a Repeater with a httpservice as dataprovider.

  in this relay, I have a < mx:Panel > that contains a < mx:Text > < mx:ButtonBar > and < mx:HSlider >.

  I need to get the text property of the text element and the value of the HSlider when changed the slider value. (using the "change =... ("my HSlider property).

  How to do what I need to know what Panel, HSlider, and whose text has been activated by the change of cursor?

  Thanks for your help

  This could help you.

• Use the information property in the form of control

  To all:

  I would like to get help to use a PDM file property information.

  I want to do is get the frequency sample clock of the file (that has been written above in an another VI) and use this sample clock frequency in the current vi without having to use another variable.

  I can see the information very well in a signpost, but how can I convert the 'variant' to a double type, data type I can use to power the mutual operation?

  attached is a JPG file with little VI by using the property

  Thanks for instructions

  Hi a. Lopez,.

  Him 'TDMS get Properties.vi' has an entry called 'data' type. You can wire a digital constant DBL in this entry and your property out rather than being type Variant value will be of type DBL. You can also find examples of LabVIEW and find examples of this (for example "TDMS - example of simultaneous access of file vi).

  I hope this helps.

  See you soon,.

  -Russ

• How to get the MAC address of the virtual machine on which vmware tool is not installed

  Hello

  In our project, we communicate to vCenter/ESX and details of virtual machines using the VI - Java 4.0.0 SDK APIs

  I use PropertyCollector for details.

  But in the following cases

  1. a virtual machine is poweredOff.

  2 VMware tool is not installed on the virtual machine.

  I am not able to get the mac using the PropertyColector address.

  To get the macaddress property I use after crossing spec:

  rootFolder (folder)-> childEntity (data center)-> hostFolder (Folder)-> childEntity (ComputerResource)

  -> host (Hostsystem)-> vm-> guest (GuestInfo)-> net (GuestNicInfo)-> macaddress (in Virtualmachine)

  I know the vSphere client uses the VI SDK to perform all operations, and I am able to see the macAddress of VirtualMachine in cases using vSphere client.

  Is any body please help me get the macaddress of VM in the two cases.

  Thank you

  Deepak

  Take a look at the dashboard feature of the virtual machine and specifically "VirtualEthernetCard": http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/vim.vm.device.VirtualEthernetCard.html

  When you assign a new vNIC to each virtual machine, a unique MAC address generated is given by default. If you still want to map the actual interface of the guestOS, then you would take a look at guestInfo as you may have noticed IF you have the VMware Tools. Although the default is whence the MAC address

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• only get the key of the 'targetLayers' of 'Dcmn"descriptor

  Hi, I work with documents of very large, with many layers, and I have a problem when trying to get the key 'targetLayers' of the descriptor "Dcmn" Photoshop building histograms and it takes a lot of time, only to get selected... layers: () I know that there is the putProperty method, which works great for layers ('Lyr') or the Application ('capp') , but does not seam to work with documents

  Done, someone has an idea on how to get only the 'targetLayers' key?

  This is the code to get the index of selected layers:

  function getSelectedLayersIdx(){// get the selected layers index( positon in layer editor)
       var selectedLayers = new Array;
       var ref = new ActionReference();
       ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
       var desc = executeActionGet(ref);
       var add = 1;
       if(hasBackground()){add = 0}
       if( desc.hasKey( stringIDToTypeID( 'targetLayers' ) ) ){
            desc = desc.getList( stringIDToTypeID( 'targetLayers' ));
            var c = desc.count
            var selectedLayers = new Array();
            for(var i=0;i<c;i++){
                 selectedLayers.push(  (desc.getReference( i ).getIndex()) + add);
            }
       }else{
            var ref = new ActionReference();
            ref.putProperty( charIDToTypeID('Prpr') , charIDToTypeID( 'ItmI' ));
            ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
            srs = hasBackground()?executeActionGet(ref).getInteger(charIDToTypeID( 'ItmI' ))-1:executeActionGet(ref).getInteger(charIDToTypeID( 'ItmI' ));
            selectedLayers.push( srs);
       }
       return selectedLayers;
  }
  
  

  and if I put this:

       var ref = new ActionReference();
       ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
       ref.putProperty(charIDToTypeID('Prpr'), stringIDToTypeID('targetLayers'));
       var desc = executeActionGet(ref);
  
  

  I get the error saying that "-the"Get"command is not currently available."

  var ref = new ActionReference();
  ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
  ref.putProperty(charIDToTypeID('Prpr'), stringIDToTypeID('targetLayers'));
  var desc = executeActionGet(ref);
  

  I get the error saying that "-the"Get"command is not currently available."

  When you create a reference object, good command of containers is critical; It goes from the specific to the general. Think of it with 'of' inserted: get the target property layer of the current document.

  It should work then:

  var ref = new ActionReference();
  ref.putProperty(charIDToTypeID('Prpr'), stringIDToTypeID('targetLayers'));
  ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
  var desc = executeActionGet(ref);
  

  HTH...

• Get the IP comments

  I use a script that is trying to collect the name and description of all the guests, but when I try to get the IPAddress property, lists just them all as "System.String". How do this output to a .csv and get the IP address of the host?

  Get-vmguest - vm (get - vm). Select-object vmname osfullname, IPAddress | Export-csv c:\vm_report.csv

  Thank you!

  This is because the IPAddress property is an array.

  One way to do this is like this:

  Get-VMGuest -VM (Get-VM) | %{
    $vm  = "" | Select VMname, OSFullName, IPAddr
    $vm.VMname = $_.VmName
    $vm.OSFullName = $_.OSFullname
    foreach($ip in $_.IPAddress){
      $vm.IPAddr = $ip
    }
    $vm
  } | Export-Csv "c:\vm_report.csv" -noTypeInformation
  

• Getting the list of Custom Component ListView

  Hello

  I'm trying to figure out how to get the 'checked' property of a custom component of QML.

  Basically, it's the same as the first example on https://developer.blackberry.com/cascades/documentation/ui/custom_components/index.html

  This is a list, with a listItemComponents, whose type: "item" contains a check box and the label.

  I have an ActionItem whose job is to take all elements that are enabled and do something.

  The ActionItem triggers a C++ code that should get this list.

  Problem is, I can't figure out how to get the selected items. I tried the selected() function but it returns empty.

  I have to turn this into a multiple selection?

  I got so far is the back of GroupModel, after selection, but this does not include anything other than what I fed in the first place. Which makes sense.

  There are a lot of similarities between this issue and the other. Should help to my code and comments in this post, I think: http://supportforums.blackberry.com/t5/Cascades-Development/LstItemComponent-doesn-t-track-the-model...

• Error: ORA-16757: failed to get the value of this property

  Hi all
  I have an error:
  DGMGRL > see the database dbname_stb LogXptStatus;
  Error: ORA-16757: failed to get the value of this property
  I check:
  DGMGRL > see the configuration;
  
  Configuration - dbname_dg
  
  Protection mode: MaxPerformance
  Databases:
  dbname_pr - primary database
  dbname_stb - physical of the standby database
  
  Fast-Start Failover: DISABLED
  
  The configuration status:
  SUCCESS
  
  drcdbname_stb.log:
  RSM0: Received the request the property Get: rid = 0 x 01010000, pid = 54
  2012-10-17 15:21:14.702 of database Resource: get the LogXptStatus property
  RSM 15:21:14.702 2012-10-17 error: trying to interview a 'LogXptStatus' primary type property on a standby database resource.
  2012 10-17 error 15:21:14.702 database resource GetProperty (16501,16757)
  
  I don't understand this error?
  Thank you all.

  Take a look on this

  Re: ORA-00254 | Trouble with dataguard