Protect the blackBerry Q10 need help to fix my blackberry!

Similar Questions

• My Apple Watch doesn't work despite the charge. Need help!

  MY Apple Watch feeds not on despite the load? Need help!

  Have you tried to force the reboot of the Apple Watch?

  Forcing Apple Watch to restart: press and hold the side button and the digital Crown at the same time for at least ten seconds, until the Apple logo appears.

• I have adware on my mac and I need help to fix it!

  I have adware on my mac and I need help to fix it!

  Try Malwarebytes for Mac:

  https://www.Malwarebytes.org/Mac-download/

  Is fast, effective and safe.

  Do not be mislead by one who can say that it is an anti-malware application.  It would be a false increased.

  Ciao.

• whenever I load photoshop there a permanent color instead of white and I need help with fixing asap, thanks!

  whenever I load photoshop there a permanent color instead of white and I need help with fixing asap, thanks!

  It's a broken screen classic, easily corrected profile

  See this thread: https://forums.adobe.com/message/7926040#7926040

• BlackBerry Q10 need help with putting in place an E-Mail on my BlackBerry Q - 10

  This is my first cell phone 'no basis', so I'm fighting in the implementation (there are some things that just are not covered at all in online user manual). The Q-10 apparently BlackBerry not the screen full of 'dial' e-mail unless your e-mail account is configured. The e-mail account, I have, what I have on my desktop computer; and because I'm so, so many emails without importance on it every day, I won't be getting all these emails on my cell phone (but I "don't" want to access on my cell for ALL options and electronic screens). Is there a way I can use my existing desktop computer e-mail address to set up the e-mail account on my Q-10 of BlackBerry, but somehow turn at 'incoming' e-mail on mobile phone off completely (so I only get emails on my computer)? In addition, which means when he asks if I want to "synchronize" my emails? Any help would be greatly appreciated!

  Remember, look up if you don't know and ask if you need help.

  See https://support.tigertech.net/outlook-express-lmos and ignore references Tiger Technologies. Set the time to keep on what you think appropriate. You can always change more or less to find the optimal length.

  Please publish. I can tell you that I am not alone in wanting to allows you to get the most out of your BlackBerry.

• I need help to fix the error - 2147024891 please

  Hello

  I got the error code: 0 x 80246008 after trying to update windows, but when I tried to look online for the answer, and has started to correct the error by activating the background intelligence transfer service, I got the error code:-2147024891 and I cannot find an answer to the it, so please help me

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/811851f8-f0a5-4e04-9517-2db30b4d6f07

  A position would have sufficed, Robert. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• BlackBerry Q10 need help with settings for e-mail account on Q10.

  I used to have Bold9900 and possible to set different "Username" and "E-mail".

  Both will be in the form of e-mail, so recipients will see my name of the sender as the enamel on the 'User name' field and cannot see my real mail. (Provided by loxinfo @cscoms.com)

  However, once that the device was introduced to the new Q10. It is more possible to do.

  I have to use the same information on both fields.

  Is there anyway that I can check the parameters of Q10?

  Note: It is always also work the same way as Bold9900 on the iPad.

  Hello and welcome to the community!

  I don't know, from your description, exactly what you're looking for. "Username" and "E-mail"? You may be looking for the ability to enter a 'reply-to' e-mail address which is different from the actual email address of the account you are sending from? If so, this feature is indeed not currently available in BB10. Among other features, this is perhaps one that many hope are added to the BB10 platform with future versions of the operating system. But for now, it is what it is.

  Good luck!

• Protect the blackBerry Smartphones BB and device password

  I just read a message on a stolen blackberry, and protect the response of BB, it's something all ready on the phone or you have to load it down, and you can also protect your device with a password that you need to enter it every time you have the keyboard loacked and enough when you activated your phone market?

  Hi flossyatk,

  Please take a look at the Blackberry Bold 9900 through the user guide, hopefully it will help a lot, also have a look at How to maximize the battery life and available memory on the BlackBerry smartphone .

  Good luck

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• Permissions are mesed up. Need help to fix it.

  Somehow, the permissions on my machine Home premium windows 7 is all messed up.  Several programs do not work now because of incorrect permissions on a directory on the system.

  It showed after a system restore.   I managed to add permisions writing for most of the places that need it, however, there is always an unknown place that isn't fair and I'm not.

  Is there some utility to restore permissions on any system, or can I reinstall windows ON my existing copy without having to reload all my programs.   I put in my windows disk and it just says: "install now".   It makes me nervous.  I know you used to be able to do it with XP (don't know about vista).

  Other ideas would be greatly appreciated.

  Thanks in advance.

  I wanted to just let you guys know how proven things.   I did two things.  Almost everything has been resolved, but there was a couple of programs that just refuse to operate and I thought I changed the permissions on everything, but nothing helps.
  I was finally just recharge my BONES together.   The pain, but I need to make sure that all parts of the system were not working, and I spent more time trying to fix the things he did to recharge.  I'm almost finished all my software loading.  Pain noted.   It seems that since I've registered my MS Office products, I can't do on the internet now.  I have to call.   This is not good.  Well.

  Thanks to you two.

• PROTECT the blackBerry BLACKBERRY Smartphones

  Hello

  I just changed a BB Curve 9360 a Bold 9900.

  On the 9360, I had installed (and it worked very well) the BB Protect app.

  On my new "BOLD", I downloaded the application of the BB world but

  -protect the bb icon does not appear in the downloaded application file

  -in my world APP translates and installed

  what I did:

  during the first installation of the application, it appeared a message (please forgive my English, I am not native language) which can be translated in: pending installation

  I've disinstalled program, re boot the phone and retelecharge the application

  I uninstalled and reinstalled several times, but nothing has changed

  No idea what to do? I need to have the application installed correctly

  Thanks in advance

  Hello and welcome to the community!

  I can't say for sure, but please use this method to check whether the application is or is not installed on your BB:

  • KB10040 How to view or delete applications on a BlackBerry smartphone

  If it is not installed and inside the AppWorld says 'Setup', then something else may be wrong. So, first of all please try this:

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  In addition, you can try this sequence:

  (1) to remove from your BB AppWorld

  • KB10040 How to view or delete applications on a BlackBerry smartphone
  • He asks to restart the BB,

  (2) a Batt Pull reboot (power on, remove the battery, wait, insert the battery, wait), even if redundant to the one you did in step 1.

  3) install a new copy of AppWorld (on your BB)

  • http://BlackBerry.com/appworld/download
  • Yet once, if he asks to restart, do.

  (4) restart another Batt-sweater

  (5) see if you can now successfully install the application.

  Also, make sure that you do not use of any custom theme while you test this out. If they for some reason, hiding the app, it may be the cause. In addition, don't forget to watch all the folders and subfolders to the home screen and make sure you have "show all" active looking application icon (assuming that the app is otherwise reported as installed).

  See you soon!

• Protect the blackBerry Smartphones unable to upgrade my BB.

  I have an upgrade available to protect my BB, but it won't allow me to upgrade or even run from my phone, when I click on it it goes right back to my apps page. Can anyone help please?

  Hmmm... which doesn't sound right does it your phone freeze. But that said, try to remove the BlackBerry Protect, restart your phone and try then put it back. You must now install the new version.

  If it still does not work, even once, let me know and then I'll see if I can get further assistance.

• I downloaded the update and I can't open the package I need help?

  I downloaded the update and cannotopen software package, why? I need help...

  You have a desktop Mac Pro 2009 with OSX 10.6.3?

• Protect the blackBerry Smartphones Blackberry Curve 8350i password

  Hello

  This is my first time post, so please forgive me if I do not do this correctly.  But I'm trying to understand how to password protect my Blackberry.  I Googled it several times, but responses that I find do not seem to be correlated with the phone I have.  Any suggestions?

  Thank you!

  Hi and welcome to the forums!

  From the main screen on the Blackberry, go to options, security options, General settings.

  Password as active place. You will then be able to set other options for the number of password attempts.

  Timeout, security etc. Once escape you the device will ask you enter the new password and verify, then save.

  Thank you

  Bifocals

• Several uses for the final product, need help with Render & output parameters

  Aloha, this is my 1st time in this forum... posted this question in Premier Pro and has been mentioned here.

  I created an effect straight project. I want to make four 4 very specific uses.  Unfortunately, I don't know anything about these formats to be given options in AE - CS4.  One of the many 'rendering settings' and 'output module' settings 'make model '.  This seems the best option for me given my future use: 1) for the DVD; (2) for electronic mail; (3) for YouTube. (4) my web site.  I read and reread the rendering and export options in the manual of use-AE CS4 without success in understanding what each option should be used for.  I need help in the translation of pixelpicker-talk.

  Can someone help me about these accurate "rendering settings" and "output module" parameters listed in AE in the option "make and model"?

  Thanks a lot... come visit the watrer is warm and clear as always.

  KonaDon

  I understand - I think the article using After Effects is a very complete resource, explaining the various features and their purposes. But the real world is full of special cases that are very difficult to address in a manual. In addition, it is a moving target. Different best options today probably the best choice, next year.

  Let's see if we can help here:

  1-. DVD: on the technical side, it is always MPEG-2. A very specific taste of MPEG-2. But while After Effects will let you export a file of this type (choosing the MPEG - 2 DVD is predefined in the output Module), it is also true that most of the applications (such as Adobe Encore DVD) DVD authoring are very friendly in terms of letting you wear one (ideally, uncompressed) Quicktime or AVI (which in no way is compatible DVD) and do the encoding in MPEG-2 for you. So it is up to you: you can encode EI using the preset DVD MPEG-2, or you can use an application of coding specialized (such as Adobe Media Encoder in stand-alone mode) or simply let the DVD authoring application do the encoding for you. This should be very simple and in this case, you can simply render a Quicktime or AVI file without loss (there is a model of output Module called "Lossless" who will take care of everything. You can use the default value, the 'best' model to make settings in most cases).

  2-. E-mail: on the one hand, you need something that is really light and as good quality as possible. In the other, you want something universal compatibility, which can be read in all or almost all computers. H264 (advanced version of MPEG-4) format is really good in terms of efficiency, but its ' adoption is perhaps not as widespread yet. Flash Video (FLV) is really good in this regard. In this case, you could choose Adobe Flash Video (FLV) as the format in the output Module and then choose preset FLV 'Flash 8 web small' for this purpose.

  3 YouTube: it's not that simple. The ideal format for YouTube is not quite exist, they insist on the re-encoding each file that you download, even if your file is technically identical in every way to their versions. So what you want here is something that looks good and it isn't huge to download. This all spells 'H264', in my opinion. The details depend on the question of if your Composition is HD or SD, 4:3 or 16:9, etc. Strange as it may seem, the big "iPod" preset for the format H264 is a good starting point. You can customize it to increase the speed of transmission a little (maybe 2 or 2.5 Mbps, against 1.5 Mbps).

  4 website: even once, you need something that most people already have in their computers. Flash Video is an excellent choice, since about 98 percent of users have the Flash plugin. But in this case, you can have more great heights and flow rates, so you can use the "Flash 8 big' defined by default as a starting point. Once the Flash 10 plugin (which now supports the H264 in addition FLV) spreads in the future, you could standardize on H264 in a delivery format, with different settings for each type of destination.

  I hope this helps.

• Spawning multiple instances of a sprite (shoot the balls).  Need help.

  Hello.  I am currently doing a game in director 11.5 for a University project.  I decided to make a scrolling space shooter, but I encountered a problem.  A tutorial I found has created a limited 'Bank' of the balls of fire, allowing only a number on the stage at one point.  What I have to do is to let a single sprite ball off the edge of the page and copy essentially he and behaviours lingo to spawn another instance of the ball on the scene when the player fires (using the left button of the mouse in this case).  I also need this copy should be deleted entirely when it collides with an enemy or leaves the boundaries of the stage, otherwise the game will just run more slowly and more slow several shots are taken.

  I heard that it is possible using the puppetSprite() method, but the API is not shine much light on the issue and no a literally hours of searching on google.  If anyone can let me know any method to do so, I would be very grateful.

  On a related, when matter fired the bullet will need to intsect the situation where the mouse cursor was when the bullet was fired and then continue on a linear trajectory.  I worked on a method to do this, but it's not very effective or efficient (the speed of the balls would be determined by the cursor of the mouse is how far from the ship of players and I think that there is probably a less intensive calculation method to achieve) and as I can't spawn bullets from now I really don't know if it will work yet.  If anyone has any advice on how to best implement this mechanic, even once, I'd appreciate your comments.  Thanks in advance.

  -start-up of the main script, movie named "main script.

  on startMovie

  _movie.idleHandlerPeriod = 0

  end

  on mouseDown

  Bullet = script ("ball script") .new)

  end

  -end of movie script
  -start of the script of the frame, frame script named 'script-framework '.
  on exitFrame me
  go part
  end
  -end of the frame script
  -beginning of the script of the ball, parent of script named "ball script."
  bulletSp property

  minY property

  pObjTimer property

  the new me

  -create sprite

  -find an empty channel from the channel in the foreground

  CNT = _movie.channel.count

  Repeat with i = cnt until 1

  If sprite (i) .member = (member 0 castLib 0) then

  -make sprite

  bulletSp = channel (i) .makeScriptedSprite (member ("bullet"), _mouse.mouseLoc)

  bulletSp.scriptInstanceList.add (me)

  minY =-(member("bullet").height)

  -start moving the ball

  pObjTimer = timeout () .new ('ball' & i, 3, #moveBullet, me)

  output of repetition

  end if

  end repeat

  return to me

  end

  on moveBullet me, _objTimer

  bulletSp.locV = bulletSp.locV - 1

  sendAllSprites (#collisionTest, me)

  If bulletSp.locV<= miny="" then="">

  me. Destroy()

  end if

  end

  to destroy me

  pObjTimer.forget)

  Channel (bulletSp.spriteNum) .removeScriptedSprite)

  end

  -end of the script of the ball
  -beginning of the collision test script, script behavior called "script of collision."
  on collisionTest me, _spOrg
  If sprite (_spOrg.spriteNum) .intersects (sprite (me.spriteNum)) then
  sendSprite (_spOrg.spriteNum, #destroy)
  end if
  end
  -end of the collision test script
  1 paste the script 'major' in one of the film's script and give it the same name.
  2. double-click on frame 1 in the script to frame channel and past the image inside script.
  3. create a new script, assign a Parent script in the property inspector and stick the ball in there script. Name it "script of ball."
  4. create a new script, assign a script of behavior in the property inspector and passed the test of collision inside script. Name it "script of collision."
  5. create an image of the ball and make sure the registration point is defined to be at the high point of the ball. Name the image of Member 'ball '.
  6 Create rectangle shapes to the top of the screen, and then drag and drop the script "collision" on them.
  7 press the Play button and move the mouse around the scene while clicking the left button of the mouse to shoot bullets. The balls will be destroyed when they reach the top of the scene or when they hit a rectangle.
  8 study scripts. If you need the commented code, or a more complete explanation/walk-through of what happens in the code then let me know and I'll give it.