PROTECTED Z930-108 - error of fingerprints after restore complete

Similar Questions

• Runtime error in Mozilla after restoring computer to an earlier date,

  I recently had to restore my computer to an earlier date. In doing so, Firefox went from 38.0.1 to 37.0.2. Now, I get the error "cannot find Mozilla runtime. I am out, trying to find a way to fix it. I have quite a few bookmarks that I prefer not to lose. I thought I could import to Internet Explorer but not had any luck with either. Have no solution? Thank you. I am posting this on another computer where is the problem. This computer is running Windows 8.1.

  Using the system restore can cause your installation of Firefox get corrupted because only the whitelist files are restored, so always be careful with the system restore function.

  • You may lose data in the profile Firefox as of .js and .ini files folder
  • You may need to reinstall the affected software

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  • Download the installer of Firefox and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• SP1 is not not a proposed update after RESTORATION COMPLETE (?) so I can't access SP2. 5 years old HP 530, 32 bit Vista Home Basic, with original discs.

  • Tries to bring an old HP 530 of 5 years (they called it a Business Notebook (?), with 32-bit Windows Vista Home Basic, back to the original, using the 2 discs that can bring the system up-to-date with updates you're invited.) I don't need to save anything, ALL the files AT ALL.
  • I want to send it back as when I bought it and use the 2 original discs to doneverything and then update it with the updates you are guests.
  • Apparently, I don't know when to press F9 or something else, at what time, or to put the second of the 2 original discs in.  As I understand it, disc #1 is the OS DVD, disc #2 is Application and Driver Recovery DVD (?). Copyright dates on these are 2007 & 2008. Also, I have the product key.
  • I need a COMPLETE tutorial, step by step, that I have tried this 4 times, do not get the hang of it, & of course do not have enough experience in this.  When I THOUGHT that I had just finished, after a multiple-update every day experience, no guests included updated Service Pak 1 (SP1), which I understand is necessary before acquiring Service Pak 2 (SP2). In addition, more my arisen Internet research a small window is to say unable to connect to the page, OPERATION ABANDONED...
  • Should I try to disable (?) Windows Defender before installing the antivirus ESET 6 and Malwarebytes paid version at this thing?       And when can I install these. As soon as I connect to the Internet, updates Windows want to start RIGHT NOW!
  • Would appreciate help with this BEFORE , I take a sledgehammer to that thing, MUCH, thank you VERY MUCH!

  Ignore the message about not using a computer.

  And 434.5MBs has nothing to do with your having only 1 GB of memory.

  434 is the size of the file.

  See you soon.

• I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel

  I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?

  See here:

  Error "Licensing has stopped working". Mac OS

• Unspecified error occurred during System Restore.Running Vista Home Basic 32 bit

  After running system restore and restart my computer, I get the message "unspecified error occurred during system restore. I'm running Vista Home Basic

  32-bit. someone at - it a response? I have no idea what to do next.

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Blackberry updates & "unspecified error occurred during system restore.

  After installing updates to Blackberry, Blackberry sync would not work.  Tried restoring the system 6 - 8 times for restoration different dates.  None of the restoration system worked.  Still received the error message as "unspecified error occurred during system restore.  Any suggestions?  I ran out of restore points.

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• an unspecified error occurred during system restore whatever that means and what should I do?

  Arisen from the usual Windows, "you want to run windows restoration", after a crash and restart on "restart Windows normally. Then got the

  message "system restore was not successful, your computer's system files and settings were not changed.
  Details:
  An unspecified error occurred during system restore
  Tried a restore point different and got the same message.
  Any help gratefully received
  (Although - we pay enough for it - he should bloody works - all the time!)

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• When you try to perform a system restore, I get an error saying: "an unspecified error occurred during system restore." (0 x 80070002)

  original title: System Restore problems

  Hi, I have problems, perform a system restore using windows 7. I get the message: "an unknown error occurred during system restore. (0 x 80070002). any help with this problem would be appreciated. Thank you very much.

  Hello

  This applies to vista, but use it for windows 7

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and issues of windows 7

  Here is the vista forums

  Try the repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Error: an unspecified error occurred during system restore

  Original title: System Restore

  After trying to restore my system, I get the message: an unspecified error occurred during system restore. I have a Wen at 3 different points with no result. Is there a solution?

  Thanks in advance
  Ronny

  Hi Ronny,.

  1. you receive the error with the error codes?

  2. did you of recent changes on the system?

  Step 1:

  You can temporarily disable third-party security software and firewalls installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Step 2:

  You can also scan [SFC] System File Checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 3:

  Alternatively, you can try to boot in safe mode and see if you can perform a restore of the system in safe mode.

  For more information, you can consult the following articles.

  Start your computer in safe mode

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• After restoring the factory network card settings will not start

  I have toshiba L300 satt he wouldn't start so after restore settings factory network card does not start so can't do updates cannot find wireless network and I tried plugging cable ethernet directly to the router still cannot be detected or nothing comes with the network adapter won't start not error code 10 tried to load the driver updates but it's so far has got no restore point or restore system disks completely made through bak right discso to normal, says its running vista 32 2006 windows looked everywhere no joy please don't help the driver is realtek rtl8101

  Hello

  go to toshiba and download the drivers for your model laptop

  There is a download tab at the top on the link below

  use the computer that you use to get here download and save to the desktop

  copy to a flash drive - transfer and install it on the other

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Windows Vista - unexpected error occurred during system restore

  original title: an unexpected error occurred during system restore, did not finish no codes.__vista Home Basic error

  HELP PLEASE. THANK YOU, RICK

  Some security programs prevent changes to their file and must be configured to allow the restoration of the system work.  For example, if your computer has Norton Antivirus or Norton Internet Security, you must disable Norton product Tamper Protection before you run the system restore. See the documentation of your security program. Boulder computer Maven
  Most Microsoft Valuable Professional

• could not access a file. possible anti-virus protection is running. error (0x80070005)

  could not access a file. possible anti-virus protection is running. error (0x80070005)

  Try a system restore to a Date before the problem began.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• I can not install Seagate Crystal reports 6.0 Massage I got is system error configuration configuration is not complete (after 36% of installation)

  I can not install Seagate Crystal reports 6.0 Massage I got is system error configuration configuration is not complete (after 36% of installation)

  Hi elbashkateb,
   
  I suggest you to remove Seagate Crystal Reports from your computer by using the windows cleanup utility. Then download this software again and try to install in clean boot mode.
   
  Download link for the windows Cleanup utility: http://support.microsoft.com/default.aspx/kb/290301  
   
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Steps to clean boot mode:

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.

  Now, try to install the program and check.
  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Unable to start the virtual machine after restoration

  Guests including Test host: ESXi 5.1.0.1065491

  Vm problem: 32-bit, Server 2003

  I use Veeam Backup & Restore 6.5 to back up my vm.  I always do a test restore to ensure that my backups are good.  I'm having a problem with a restore.  The 32-bit Server 2003 vm starts just fine on the main host it runs on.  All the vm are 64-bit except for one who is a 32-bit Server 2003 vm.  Restoring the machine virtual and implemented on a host except the 32-Bit vm Server 2003 test.  After restoration and trying power to the top, I get the following error:

  Unable to start the virtual machine.

  Turn on VPCM module has failed.

  Viewed performance counters require version 3 or greater of architectural performance monitoring.

  Anyone know if there is a fix for this problem?

  TIA,

  Mux

  I assume you are using different hardware (CPUs, the BIOS settings) for VMS restored!

  The virtual machine has VPCM enabled, which causes the problem. You can either disable it in vSphere Web Client (you can do this in the vSphere Client Windows), or directly modify the .vmx VM by setting vpmc.enable to "FALSE".

  For how toggle this setting in the Web Client see allow virtual in the Web Client vSphere CPU Performance counters. If you want to edit the .vmx file manually, you need to delete/re-add the VM from the inventory or recharge (see http://kb.vmware.com/kb/1026043)

  André

• Reinsall lightroom after restoring my pc to factory conditions

  Impossible to reinstall the light room after restoring my pc to factory conditions.  Error 1152.

  Please notify.   Thanks John

  Sorry once again. After you have reinstalled the other adobe applications. Properly installed LR

  Thanks for your help. John