Protection against XSS attacks with tabular forms

Similar Questions

• How to enable protection against SYN attacks? my laptop is under this thread.

  My Internet access to "ON" and "OFF". "» Help, please...

  Hi abangmamat,

  Thank you for posting. You can protect yourself against these types of attacks using Windows or a third-party firewall.

  If you are vulnerable to a SYN attack, you can do the following.

  1. click on start, then run.
  2. in the run window, type 'CMD' and press 'OK '.
  3. in the command prompt window type: netstat - n tcp Pei

  Look at the output for the entries in a SYN_RECEIVED State. If you notice several entries, your system is vulnerable to attack.

  I hope this helps. After the back if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Just improved (downloaded) 4.0.1but note pops up saying my version (old version) is not protected against online attacks - new version does not show up when Firefox open

  When I open Firefox this morning a note pops up saying that my version should be upgraded to 4.0.1. I downloaded this version, but every time I open Firefox the note still appears. Download the 4.0.1 version. Why is it not open with this version?

  Your user agent string (identifies the version of the browser) reports that you have Firefox 3.5.4 and not 4.0.1

  A quick look to confirm which version you have, if the bookmarks menu has an object called "organize bookmarks" you use Firefox 3.5.19, if it has one element called "show all bookmarks" you Firefox 4

  If you have Firefox 4, you must reset your user agent string so that it correctly identifies the version of Firefox.

  1. Enter about: config in the address bar and press on enter
  2. Accept the warning message that appears, you will be taken to a list of preferences
  3. Locate the general.useragent.override preference, right-click on it and select Reset, this function will set the default user agent string in Firefox 4

  There are other user agent string settings that may have changed, but these are no longer used in Firefox 4. You can reset them if you want, for details, see https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser

  If you always use 3.5.4, you need to run the installer for Firefox 4.0.1 file you downloaded to install it.

• Error ORA-01445 tabular form on a Collection in APEX 5

  When I load a page with a tabular presentation built on a display of a collection to the APEX 5, I'm getting an ORA-01445: cannot select ROWID, or the sample, a view of joining without an error table preserved key.

  I create a view

  CREATE or REPLACE FORCE VIEWS test_coll_vw

  (

  C001,

  C002,

  C003,

  C004,

  seq_id

  )

  AS

  SELECT TO_NUMBER (c001),

  C002,

  TO_NUMBER (c003),

  TO_NUMBER (c004),

  seq_id

  Of apex_collections

  WHERE collection_name = 'TEST '.

  Then create a tabular presentation on the view with the primary key of the source SEQ_ID and primary key of the trigger existing through the wizard.

  Debug information shows the statement which is a failure:

  Select NULL NULL "CHECK$ 01", "SEQ_ID,' NULL 'C001', NULL"C002', 'C003', 'C004', NULL NULL NULL "APEX$ ROWID ' sys.dual union all select ' CHECK$ 01", 'SEQ_ID', 'C001', 'C002', 'C003', "C004", "APEX$ ROWID" in (select NULL "CHECK$ 01", "SEQ_ID", "C001", "C002", "C003", "C004", "ROWID" "APEX$ ROWID" (select).

  "SEQ_ID."

  "C001."

  "C002."

  "C003."

  "C004.

  of 'WPCAMS_APP '. "" TEST_COLL_VW ".

  ) APEX$ RPTSRC

  order of 1, 7

  ).

  These tabular forms worked up to 4.2, but they seem to fail at 5 APEX for upgrade or newly created pages one.  The generated query is identical between versions, but it seems that the underlying apex_collections view has changed between versions and the origin of the problem.

  Does anyone have a solution or workaround?

  Thank you

  Hi Phil,

  APEX 5.0 the definition of the view of apex_collection had to be changed for security reasons. This change introduced a regression with tabular form validations, when the table refers to this view. Tabular form declarative validations require the ROWID in order to restore your changed data after a validation failed, and for this reason, APEX is insert the IDENTIFIER in the query in a table. It is currently not possible when tables refers to the sight of apex_collections. We are looking at a solution to this problem, but for now the only way to get around this is not, in this case, use the declarative validation and use some custom validations or process.

  Kind regards
  Marc

• problem with adding line in tabular form after that put 4.1.1 to level

  We have recently installed the Update 4.1 .1. We now have a problem with some of our tabular forms created using the wizard. The delete and update feature works fine, but when trying to insert a new record, it will insert only the first record, but after that, it will no longer inserts. It acts as ApplyMRU (updated online Multi) is not at all shooting. No success or error message. I tried to create forms based on the rowid and also on the suites (with and without triggers), and they all behave the same way.
  
  This happens both in IE and Mozilla. Tabular forms were working fine before the upgrade.
  
  Everyone knows this?

  We just hit this issue and thanks to this thread and a light bulb above my head, resolved this question today. There is more to the story. Copy the necessary images in place works, but get the full version 4.1.1 images.

  We were already on 4.1.0.00.32, so I applied only Patch 13331096 upgrade to 4.1.1.00.23. Patch 13331096, at least one that I downloaded a few weeks ago IS NOT ALL OF THE NECESSARY IMAGES.

  Fortunately, I thought to download both. When I did a number of files in the directory images between the full version and the patch, the County came up short for the patch.

  If you have this problem, get your hands on the full release 4.1.1.00.23, NOT Patch 13331096and copy these files to image in place. Who sets the we.

• In tabular form button to start the procedure with parameter

  I have a column in my table presentation that calls a procedure.
  I got this works with dynamic action related to a jquery selector.
  
  Now this procedure (called dynamic action) takes a parameter. I need to pass the value of the column, the ID of the line. (it is the value in the column that appears as a button)
  
  How to use this value in my procedure?
  I tried to pass this value in the column link attributes to a page element, but this action is performed after the dynamic action is called.
  
  Thanks for som advice!

  jstephenson wrote:
  You should be able to try something like this: javascript:callMyPopup(#ROWNUM#). I do it on a column derived in tabular form. Inside of my callMyPopup I have also to retrieve a value from one of the other fields on the line. You should be able to check your html code to get the correct f0X id. Here's a piece of the callMyPopup function
  If (bow<>
  {
  psearch = document.getElementById('f05_000'+pRow).value;
  }
  ElseIf (bow<>
  {
  psearch = document.getElementById('f05_00'+pRow).value;

  I hope this helps.

  Thank you

  Jeff

  In fact, instead of these cases the conditions you can use an existing table:

  document.wwv_flow. F05 [Prow], which gives you the item. You can then access any property of this element you want. ID, value, name etc.

  Trent

• problem with checkbox on the tabular form

  (All my friends at the time of deperate) Hi,
  
  I have a tabular form on a page, which I use for adding record only. So it always shows me a blank line, which is ready to be inserted after the user has filled in the data and click on the "submit" button.
  
  Now, I have a field check box on this form of table. Since all the columns that I show as null, I also shows this check box cleared when page appears. This is the query for the region of origin of this form:
  
  SELECT "Customer", null
  NULL "currency."
  HTMLDB_ITEM. CheckBox(40,'YES',null) critical_box,
  OF the double
  
  I used the 'YES' as return value of this checkbox (when the user checked, otherwise I guess that's not equal to 'YES').
  
  I have my own update process, which gets triggered when clicking on 'submit '.
  It's my insert clause in this update process:
  INSERT INTO table1
  (customer, currency, critical_level)
  values
  (APEX_APPLICATION.g_f01 (i), APEX_APPLICATION.g_f02 (i), decode (APEX_APPLICATION.g_f40 (i), 'YES', 'YES', 'NO')
  
  
  Now the problem is that when I click on checkbox and save it, it adds record correctly. But when I click on check box when you insert, I get error message no data available. It must insert 'NO' for the 3rd column when the check box is not clicked.
  
  Please help here. Not sure why its not giving no data found error when unchecked the checkbox on the form of tables.
  
  Thank you and best regards,
  Rave.

  Sorry, this one is out of date, try this

  http://HTMLDB.Oracle.com/pls/OTN/f?p=31517:219

  Here are a few related threads you might be interested.

  Re: Boxes to check off and go to the other fields in the table
  Re: Problem in selecting the checkbox values
  Tabular presentation - box

• Emails are protected against spam?

  Hello

  I just built my first site in Muse (www.zest-graphics.co.uk) and wanted to check something - are all instances of an e-mail address written on a site protected against Spam? I know from experience gained in the use of Softpress Freeway Pro, a kind of protection is automatically added to an e-mail to the addresses listed on the site? I've added a reCAPTCHA to the contact form, but she wondered what anyone is made for plain old addresses e-mail elsewhere on the site. Is this even a question?

  I ask because the site had been direct my customer receives spam increased traffic.

  Any help is appreciated!

  Neil.

  Cloudflare installation on the site (its free). Once it is set up, go to their applications and enable the protection of email with ScrapeShield

• FRM 40200:Field is protected from the update in the form of seeds

  Hi all

  I'm trying to update a record with the type 'OIE_AUDIT_ACTIONS' of the research, but I get this message below to update (I'm trying to uncheck the checkbox)

  "40200:Field FRM is protected against the update".

  Do we not have any method for updating the code above search without customize the seeded form.

  Please visit the link below to display the form.

  http://imgur.com/c4MEGUZ http://i.imgur.com/c4MEGUZ.PNG

  I was able to make back-end by using a sub request, but I need to do front end (I mean by application)

  "update fnd_lookup_values set ENABLED_FLAG = 'n' where lookup_type = 'OIE_AUDIT_ACTIONS' and LOOKUP_CODE = 'DECLINE.

  Please suggest me the process.

  Thank you

  Pavan

  Hello.

  For wath I can see (correct me if I'm wrong), it is are seeded Payables Oracle Application registers. If you touch these recordings and there is no way to do unless you use the back-end, you may lose control of your data.

  What exactly are you trying to achieve?

  Octavio

• Validation of tabular form regarding the item master detail

  Hi guys,.
  
  I have installation master detail on my page with a layout table below.
  
  The master record has a field called RCV_QTY.
  
  The tabular presentation has a column called box_qty.
  
  What I'm trying to do is to validate it against the user to add lines in the table form which when added, is more than the amount of heading RCV_QTY.
  
  I tried the following function returns the validation text error but it's not enough work.
  
  As the line in the custom of tabular form be seen by the following SELECT INTO statements on submit, I guess I need more of a process of dynamic action type?
  
  
  DECLARE
  
  v_hdr NUMBER;
  v_line NUMBER;
  
  BEGIN
  
  SELECT hdr.rcv_qty
  IN v_hdr
  OF XXMEL_VMI_RCV_HDR_TMP hdr
  WHERE the hdr. VMI_RCV_HEADER_ID =: P2_VMI_RCV_HEADER_ID;
  
  SELECT SUM (line. BOX_QTY)
  IN v_line
  OF XXMEL_VMI_RCV_HDR_TMP hdr
  Online XXMEL_VMI_RCV_LINE_TMP
  WHERE the hdr. VMI_RCV_HEADER_ID = line. VMI_RCV_HEADER_ID
  AND hdr. VMI_RCV_HEADER_ID =: P2_VMI_RCV_HEADER_ID;
  
  
  IF (NVL(v_line,0) - NVL(v_hdr,0)) < 0
  THEN
  RETURN (' ERROR: the sum of the quantities of tag is greater than the quantity of the received header ');
  ON THE OTHER
  RETURNS A NULL VALUE.
  END IF;
  
  END;
  
  Any help would be great.
  
  I use Apex V4.0.

  Hello

  You must use the API APEX_APPLICATION total up to the Box_Qty of detail in Validation, and compare with the RCV_QTY. something like

  DECLARE
    V_BOX_TOT NUMBER := 0;
  BEGIN
    FOR I IN 1..APEX_APPLICATION.G_F01.COUNT LOOP
       V_BOX_TOT := V_BOX_TOT + TO_NUMBER( NVL(APEX_APPLICATION.G_F01(I),'0'));
   END LOOP;
   IF V_BOX_TOT > :P1_RCV_QTY THEN
      RETURN FALSE;
   ELSE
     RETURN TRUE;
   END IF;
  EXCEPTION
    .....
  END;
  

  Kind regards

• As 10/21 update will not protection against vulnerabilities Norton 11.1.0.73 - 1, I want to put to day &amp; product Norton, HOW CAN I?

  I would like to apply update but do not want to loose 11.1.0.73 - 1 Norton Protection against vulnerabilities
  Is this possible? If so, how?

  Guaps, really should not be a problem as 16.0.2 is just an update to security chemspil as always is 16.0 well enough.

  Zubair was happening back saying it is Firefox 16.0.2 which is not compatible and Norton which is not yet updated to be compatible with the 16.0.2.

  Mozilla has nothing to update with Firefox 16.0 unless there was some tiny chance of a regression with 16.0.2 (which would be a first) causing problems. It's Norton who must be compatible, if that is the problem and to me if it is compatible with 16.0 so it should be compatible with the 16.0.2 as why they make too demanding things if that's what they do.

  In addition, it is 16.0.2 and not 16.02

• Is what level of protection against shock disc in Portege R830

  People,

  I work in an area where there are a lot of people who wear their laptop Portege (especially the R830) autour while they are still on - mainly well they are switching from a desktop to the meeting etc. rooms and often their transport on an angle. I feel a bit silly because I insist on the mine to sleep before she started.

  What level of protection against shock disc is there in these laptops? Am I paranoid or everyone of inviting disaster?

  Thank you

  Yokki

  Hello

  First of all its not really good for the drive if the laptop would be inappropriate while the HARD drive is used in this case head read/write from the disk HARD would be hit while holders along but there is a software called Toshiba HDD protection using a sensor built into the laptop. HARD drive protection detects the vibrations and shocks and HARD drive head moves automatically in a safe position to reduce the risk of damage caused by the head in contact with disc.

  More about CIHI:

  + What Toshiba HDD Protection? +
  https://APS2.toshiba-tro.de/KB0/FAQ2503AZ0000R01.htm

• How I bounce back without having to change the setting of 'Protection against overload only' amateur off EACH time?

  How I bounce back without having to change the setting of 'Protection against overload only' amateur off EACH time?

  This setting should be preserved, once you set it... so I'm not sure why you have to define every time...

  Then... Make sure that you put on ALL the tools of the art of logic in the preferences of LPX...

  Otherwise... you may need to reset the prefs of LPX... Put all the Tools Advanced again and the other preferences you have set... and see if that fixes things for you...

  You can resolve many issues by restoring Logic Pro X back to its original settings. This will not affect your media files. To reset your settings preferences of the user to Logic Pro X to their original state, do the following:

  1. Logic Pro X to quit smoking
  2. In the Finder, select go to folder menu reach.
  3. Type ~/Library/Preferences in the field 'go to folder '.
  4. Press the Go button.
  5. Delete the com.apple.logic10.plist file from the Preferences folder. Note that if you set custom shortcuts, it will reset to the default values. You can export your custom key as a preset before performing this step. See the Logic Pro X user manual for details on how to do this.
  6. If you are having problems with a control surface in Logic Pro X, you can also delete the com.apple.logic.pro.cs file in the Preferences folder.
  7. Restart the computer.

  Note: If you cannot find the files listed above, you don't follow the instructions properly!

• Impossible to enable protection against vibration HDD

  I disabled the protection against vibrations and it cannot activate again. I consulted with utilities and the screen to turn on is grayed out.
  I called Toshiba support and they told me to restore to an earlier date. Any date, I chose, I have an error message whenever I try to restore.

  Any suggestions?

  Hello

  I assume you are talking about HDD Protection Utility.
  In my opinion, you must remove the system installation tool.
  Should consult the European driver of Toshiba page and must download and install the HDD Protection Utility.
  Then restart the laptop and check this tool works.

  Good bye

• Disable the protection against shock - SSD

  I was wondering if there was a way to disable the active protection system in my Lenovo Y560. I have recently replaced my original HDD with a SSD, what makes this useless system. This computer is about 3 years and it is currently running Windows 7 Home Premium, if it changes anything.

  After reading the forums, I have not found all messages that seem to offer a procedure step by step on how to do this. Tech unsavvy, I limited myself looking for the control panel in the hope of resolving this issue, but nothing helps. I thought that I post here so I'm looking for more information.

  Thanks in advance.

  Just uninstall the software that allows the protection against shock in Add or Remove Programs Control Panel. This can cause to have an "unknown device" in Device Manager.