Provider main time plan CAWC unconstrained treatment

Similar Questions

• How can I remove eventListener on the main time line off the loaded SWF?

  I have a Workbench where my main timeline is retouching of the marked sections. In one of the marked sections I have load and SWF file using greensock SWF Loader. In the loaded SWF file, there is a command where I need to remove/addEventListeners on the main timeline of the flash file in the loaded SWF file.

  The establishment with "MovieClip (parent.parent.parent.parent)." works for the navigation and loading and other functions. However, I get the error "1120: access of property unidetified" if I want to use a line of code like this:

  MovieClip (parent.parent.parent.parent) .mainNav_buttonsGroup_mc. Applications_b tn_mc.removeEventListener (MouseEvent.ROLL_OVER, overHandler_Applications_btn);

  I'm just writing this EventListeners again in the SWF file loading (thus repeating once again that they are specified on the main time line already) or there is a better method for her?

  appImgBtns_mc.testBtns2_mc.addEventListener(MouseEvent.CLICK, onClick_testBtns2);
  
  
  function onClick_testBtns2(event:MouseEvent) :void {
            /////////
                      ////disabling the button onClick by removeEventListener
                      //MovieClip(parent.parent.parent.parent).mainNav_buttonsGroup_mc.Applications_btn_mc.removeEventListener(MouseEvent.ROLL_OVER, overHandler_Applications_btn);
                      //MovieClip(parent.parent.parent.parent).mainNav_buttonsGroup_mc.Applications_btn_mc.removeEventListener(MouseEvent.ROLL_OUT, outHandler_Applications_btn);
                          //MovieClip(parent.parent.parent.parent).mainNav_buttonsGroup_mc.Applications_btn_mc.removeEventListener(MouseEvent.CLICK, onClick_Applications_btn);
                      ////coloring the button
          MovieClip(parent.parent.parent.parent).Applications_btn_timeLine.play();
    
                      //Products_btn_mc
                      //MovieClip(parent.parent.parent.parent).mainNav_buttonsGroup_mc.Products_btn_mc.addEventListener(MouseEvent.ROLL_OVER, overHandler_Products_btn);
                      //MovieClip(parent.parent.parent.parent).mainNav_buttonsGroup_mc.Products_btn_mc.addEventListener(MouseEvent.ROLL_OUT, outHandler_Products_btn);
                      //MovieClip(parent.parent.parent.parent).mainNav_buttonsGroup_mc.Products_btn_mc.addEventListener(MouseEvent.CLICK, onClick_Products_btn);
                      //discoloring the button
          MovieClip(parent.parent.parent.parent).Products_btn_timeLine.reverse();
    
    
            MovieClip(parent.parent.parent.parent).sourceVar_AppPopUpsLoader_fromPrdcts="images/app_images/original/icysophistication_new_tl.swf";
            MovieClip(parent.parent.parent.parent).gotoAndPlay("appPopUps_fromPrdcts");
  }
  
  

  You can communicate with the main timeline by dispatching events from the child swf file.

  When the child Swf is loaded, dispatches an event, i.e. - dispatchEvent (new Event ("DoTimeLineCode"));

  Then on your main timeline, listen for the event and perform the desired functions:

  MovieClip (root) .addEventListener ("DoTimeLineCode", mainTimeLineFunctions);

  function mainTimeLineFunctions(e:Event):void

  {

       MovieClip(root).Applications_btn_timeLine.play();

  etc...

  }

  ChasingMovieClip(parent.parent.parent.parent) has always been a losing battle for me. It's best practice to use event dispatchers and listeners to instantiate "things" from the parent child paradigm.

  ~ Chipleh

• Can I access a label inside a MC and then return to the main time line

  Here is my current set up.

  I have a section marked on the main timeline that has the icons of 12 different videos. Each icon acts as a button and brings a user to a section marked with a FLV Playback component work video to play the corresponding video. These marked sections are located on the main of the time.

  This methog is my very long time mainline. Is there a way to do an additional MC which will hold all the buttons of the video and then have this MC separated in marked sections.

  In other words can I access a label inside a MC and then return to the main time line?

  My current code to access the label placed on the main timeline is:

  HowTo_maininfo_mc.theArrangement_btn.addEventListener (MouseEvent.CLICK, theArrangement_btn_amimated_btnDown);

  function theArrangement_btn_amimated_btnDown(event:MouseEvent):void {}

  gotoAndPlay ("theArrangement");

  }

  What it would be like if my "theArrangement" label would be located inside a MC?

  Is there a specific code of if I want to have a close button located on the label inside a MC and he needs to get on a label located on the main timeline?

  You should have an image with an flvplayback component and having each button assign the variable value from a source that is used by your component:

  var sourceVar:String;

  function theArrangement_btn_amimated_btnDown(event:MouseEvent):void {}

  sourceVar = "arrangement.flv";  for example

  gotoAndPlay ("flv_pb");

  }

  ///

  and as part of the "flv_pb", use:

  yourflv_pb.source = sourceVar;  where yourflv_pb is your component instance name.

• How to lock firefox so that if I provided the time for firefox password I have connected in all sites such as facebook, G-mail?

  OK, so I want a definition of firefox as everytime I open firefox, it should act like he doesn't remember anything, no browsing history, no cookies, no password for any site. But as soon as I provide a password for firefox, it should be regarded as "My firefox" and sign throughout the site for me like facebook, g-mail and others. In short, I don't want to connect all sites that it time and time again at the same time, I want not firefox to remember history. Is there a setting in Mozilla firefox?

  You can use the master password to go through this article that will help you.

  https://support.Mozilla.org/en-us/KB/using-master-password-Firefox-Android?ESAB=a & s = password + doesnot + Get + accepted + Firefox + for + Android & r = 0 & s = ACE

  Kind regards
  Gerard sharma.

• The main time line control Movieclip symbol.

  I am new to AS3. So what I did, is to create 3 buttons on the main timeline, each button will be goto a framelabel/keyframe. Presents all works, however in this picture-key, I have a symbol with a FLV video integrated in it. I want to push a button on the main timeline, goto that keyframe and the film plays. So far it works, the problem is I want to stop the movie when I slect a different button. If I select a different button, the film continues to play and if I hit this same but go back t the film, then the film begins to play and I have 2 bodies playing at the same time. I tried to get here, but I can't seem to find anything like what I'm doing.

  So here is the main scenario, I have 3 buttons on the layer of the menu and the content of separte on each of the 3 images to label points.

  

  As you can see I have a video flv embedded in a symbol (type Movie Clip), so when I select button 2 he goes and plays the movie, but when I select key 1 or 3 to change the setting up, the film continues to play in the background, (I can hear the audio), was hoping someone can tell me how to add code to stop this When I select another button below is my code that I have now,

  

  Here you can see that the video is embedded in the movieclip. I do this because I want to have only 1 file, I don't want an external file. I am trying to create a mobile app, so I want only 1 file.

  Any help is greatly appreciated.

  use:

  Stop();

  var point: point;

  btn_page1.addEventListener (MouseEvent.CLICK, onPage1);
  btn_page2.addEventListener (MouseEvent.CLICK, onPage2);
  btn_page3.addEventListener (MouseEvent.CLICK, onPage3);

  function onPage1(event:MouseEvent):void
  {

  removedotF();

  gotoAndStop ("page1");
  }
  function onPage2(event:MouseEvent):void
  {
  gotoAndStop ("page2");
  dot = new Dot;

  addChild (dot);
  dot.x = 10;
  dot.y = 10;
  }

  function removedotF (): void {}

  {if (dot)}

  dot. Stop();
  

  removeChild (dot);

  dot = null

  }

  }

  function onPage3(event:MouseEvent):void
  {

  removedotF();

  gotoAndStop ("page3");
  }

  p.s. Please check the useful/correct.

• Commissioning, provider Services and planning and Essbase

  I'm having a problem with users (planners planning) planning and Essbase added to Manager Data Source for a Shared Services provider connection.
  
  Here they are all on 11.1.1.3 and Excel 2003.
  
  I found that I have to configure planners as:
  (1) Essbase for administrators to add Essbase
  (2) shared Services Application creators to add planning
  
  If I don't do the foregoing, when planners are trying to add Essbase or planning (and Yes, I confirm that an Essbase admin means nothing for the addition of a planning server and vice versa for SSP app creator to Essbase), they get a "this operation is not permitted under your APS user account privileges.
  
  I'm desperately hoping that I have made a huge mistake and have neglected an incredibly obvious framework as the provisioning of planners for both roles above is simply not on, especially wrt Essbase.
  
  FWIW, if I add these connections as an administrator, disconnect and then connect to already added connections, everything is fine. However, it is a significant administrative burden and opens all kinds of security, calendar, questions etc.
  
  If anyone has experienced this? And more importantly, figured out how to fix this?
  
  I found a document Metalink re this error but it was around the creation of Smart slices. It is 20 miles down the road where I am right now.
  
  Kind regards
  
  Cameron Lackpour

  When you add the new server in the source of data for Essbase or planning manager it adds this APS Server and is available for all users. It should only need to be done once, and that is why it is an administrative task.

  I may be misunderstanding then please clarify if what I say is meaningless...

• Make an express airport only connect to an another AE and not the main Time Capsule.

  Hi all

  I have a Time Capsule airport and 2 Airport Express. The Capsule is far and an of the expressed airport is in the middle (call this) 1 and the other far from it, I'm calling this 2. As it is now, the 2nd Airport Express terminal connects to Time Capsule. However, it gives me much lower speed (Interruptions during the game). But if the 2nd Airport Express connects to the AE first, which is the extension of the network of transport CANADA, significantly improves the speed.

  I've tried everything. All devices are relatively new (think of the last model). I called the Apple Support, but their solution was to any wire. I asked if the 2nd AE can be configured statically, but they have quoted me their policy, which is not supported and took my info and never called back. I read the posts of the forum, but could not find any relevant information.

  Can someone tell me how I can do the 2nd AE connect only to the AE 1 (in the middle) so I can get faster speed for the game device wired to the 2nd AE? Your feedback is much appreciated.

  Kind regards

  B.

  When you try to extend using the wireless, there will be a loss of speed associated with the process.

  When the two Airport Express connect to Time Capsule, it will be more loss of speed because the 2 devices are connecting and extending.

  If the 2nd Airport Express does not connect to... Time Capsule and it connect instead to the 1st AirPort Express... then 2nd Terminal AirPort Express doesn't have to extend the network.  The 2nd Airport Express could be used for AirPlay, or to connect to a remote printer on the USB port, but it cannot 'expand' or 'repeat' in this case the signal of the wireless network.

  So you're wrong bing into thinking that the network is the extension more quickly if the 2nd Express connects to the 1st. Your network will behave at the faster speed even if you just turn off the 2nd Express.  It is not at all in any case extending the network, and you don't need.

  Here's another way to look at the same thing... using an illustration of the Apple support document for the extension of a network:

  

  IF... you can connect the 1st Terminal AirPort Express at the time using an Ethernet cable Capsule... then... the 2nd Airport Express would extend the signal from the first... but speed would be because you are trying to extend using the wireless.

  SO... connect the AirPort Express devices using Ethernet... then you will have maximum coverage at the highest speed... Since there is no loss of signal via the Ethernet cable.

• Create a variable time planning

  Hi all
  
  & fractiondate = 08:15
  and end_date = 16:15
  
  with this query:
  

  select
  &fractiondate + (level * numtodsinterval(&minutefraction, 'MINUTE') ) Hours
  from dual connect by &fractiondate+ (level * numtodsinterval(&minutefraction, 'MINUTE') ) <= &end_date

  It works given & minutefraction sets for example, 10 minutes, but I should change (making variable & minutefraction) whose value is a table get, like this

  name    time_begin , interval in minutes 
  SMITH     08:10 15
  ALLEN     09:10 10
  WARD     10:10 10
  JONES     11:10 15
  MARTIN     11:30 10
  BLAKE     11:50 10
  CLARK     12:10 10

  How can I get a plannning of time like that one, that when I don't have a line, the interval is that of default = 10 minutes, other given line:

  08:10  SMITH      15 
  08:25  blank
  08:35  blank
  08:45  blank
  08:55  blank 
  09:05  blank 
  
  09:10 ALLEN 10 
  09:20 blank
  09:30  blank 
  09:40  blank 
  09:50  WARD      15
  10:05  blank 

  Thank you all

  with param_tab as
   (
     select 'SMITH' name,'08:10' time_begin, 15 intv from dual union all
     select 'ALLEN','09:10', 15 from dual union all
      select 'WARD','10:10', 10 from dual union all
      select 'JONES','11:10', 15 from dual union all
      select 'MARTIN','11:30', 10 from dual union all
      select 'BLAKE','11:50', 10 from dual union all
      select 'CLARK','12:10', 10 from dual
     ),
     t as
   (
   select to_date('03/05/2013 07:00:00','DD/MM/YYYY HH24:MI:SS') as fractiondate,
              to_date('03/05/2013 11:00:00','DD/MM/YYYY HH24:MI:SS') as end_date
    from dual
     ),
    all_intv as
   (
     select t.fractiondate+ ((level-1) * numtodsinterval(10, 'MINUTE') ) dt,10 intv,
             fractiondate,end_date
    from t
    connect by t.fractiondate+ ((level-1) * numtodsinterval(10, 'MINUTE') ) <= t.end_date
   ),
   all_data as
   (
    select dt,p.intv,p.name,sum(p.intv-10)
                             over(order by dt) sm,
           to_char(fractiondate,'hh24mi') st_tm,to_char(end_date,'hh24mi') end_tm
    from all_intv i
         left outer join param_tab p
           on (
                  p.time_begin > to_char(dt-NUMTODSINTERVAL(i.intv,'MINUTE'),'hh24:mi')
                  and p.time_begin <=  to_char(dt,'hh24:mi')
                  and to_char(dt,'hh24:mi') between to_char(fractiondate,'hh24mi')
                     and to_char(end_date,'hh24mi')
              )
   )
   select dt+
          NUMTODSINTERVAL(nvl(sm,0)-(nvl(intv,10)-10),'MINUTE') dt,nvl(intv,10) intv,name
   from all_data
   where to_char(dt+NUMTODSINTERVAL(nvl(sm,0),'MINUTE'),'hh24mi') between st_tm and end_tm
   order by dt;
  
  DT                         INTV NAME
  -------------------- ---------- ------
  03/may/2013 07:00:00         10
  03/may/2013 07:10:00         10
  03/may/2013 07:20:00         10
  03/may/2013 07:30:00         10
  03/may/2013 07:40:00         10
  03/may/2013 07:50:00         10
  03/may/2013 08:00:00         10
  03/may/2013 08:10:00         15 SMITH
  03/may/2013 08:25:00         10
  03/may/2013 08:35:00         10
  03/may/2013 08:45:00         10
  03/may/2013 08:55:00         10
  03/may/2013 09:05:00         10
  03/may/2013 09:15:00         15 ALLEN
  03/may/2013 09:30:00         10
  03/may/2013 09:40:00         10
  03/may/2013 09:50:00         10
  03/may/2013 10:00:00         10
  03/may/2013 10:10:00         10
  03/may/2013 10:20:00         10 WARD
  03/may/2013 10:30:00         10
  03/may/2013 10:40:00         10
  03/may/2013 10:50:00         10
  03/may/2013 11:00:00         10
  
  24 rows selected.
  

  Published by: JAC on 29 may 2013 18:58

  Published by: JAC on May 29, 2013 19:03
  It is not correct... :(
  You're going to want to work more...

• access to the main time line function

  Hi all

  In as2, we use _root to access the main timeline inside the movieclip or button function.

  In as3 how to access the main scenario works inside the movieclip or button.can please tell me.

  'root' is the equivalent of AS3, but use it alone will often not wortk.  Most often, you will need to cast as a form of object until the compiler will recognize.  To aid "MovieClip" (root) will usually do the trick.

• New planned orders are born in the planning of the time barrier, if the request falls within the time

  Hi all

  We have created a new plan ESD forced without planning retail.

  New orders come in time Planning Guide,

  Take into consideration any element with TFP only 10 days, executed Plan date as 2nd June.
  
  The application is May 30.
  
  Planned orders are generated for this article in the TFP also get to meet the demand.

  is it suggested that any option of profile controlling these behaviors with kindness.

  Thank you

  Pascal

  Hi Pascal,.

  In a plan of ESD, the main constraint is to enforce the application due date.

  In this case, the engine is contrary to all the other constraints to meet demand (including PTFS) due date.

  Plus, the example you cited is a case of suffering order and so logically, it makes sense to violate TFP in order to reduce delay in the delivery.

  Hope that helps.

  Kind regards

  Mohan Balaji

  NOTE: Please indicate the post as helpful or answered if the update has really helped you. This would also bring the wire to the logical conclusion and will be useful for viewers.

• Copy of data in Hyperion Planning time consuming

  Hi all
  Hello.
  I use copy of data in hyperion planning (11 1 2 2) to copy from one scenario to another selection account annotations and supporting details.
  The essbase copy of the completed data (checked sessions) part, but when I checked the console work in planning, he said: treatment for more than 2 hours.
  My planning java heap size is 1.5 GB and the backup database is SQL server
  
  My suspicion is that the issue was with sql backend. but I have no where to start.
  anyone can guide me please.

  It get connected in the HSP_JOB_STATUS table. I think that it disappears once you restart Planning.

• Where can I define the transit time of the supplier?

  Hi Experts,
  
  I have a doubt in the definition of transit time.
  
  Defining the supplier lead time, one of the most important breaking is the lead time of intansit.
  
  I can set the lead time in transit provider "processing time" of the attributes of the element?
  
  And for the CPHA to consider the transit provider for the planning period, where should I set it?
  
  Thank you for your valuable time.
  
  BR,
  Babu Ji

  The addition of transit times to the post-processing of lead time is a bad idea. It will certainly CAWC spit more reschedule messages as necessary. And it can increase your onhand inventory and decrease your inventory turnover.

  Why you want to represent transit lead time separately by the supplier replenishment lead time? That's reduce reschedule the time in transit for the choice of messages?

  Is to install the provider as an org and set transport systems maritime inter-org. You can specify the transit times it.

  Hope that answers your question
  Sandeep Gandhi
  Independent consultant
  513-325-9026.

• There is Airfoil and Airport Express, latency/delay time?

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  But the audio output should be "real time." in other words, no delay or latency at all. Both are in the same room!

  I use notation software (Sibelius) and need to hear what I write immediately. Unlike streaming where I think there is an acceptable delay (2 seconds?) for the buffering?

  Is this possible please?

  If it isn't with AirFoil, any advice on how welcome :-)

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  With AirPlay (or Bluetooth), there will always be a form of delay or latency with streaming audio.

  In this scenario, an audio stream (on AirPlay) will go first to your iMac to AirPort Extreme and AirPort Express Terminal.

  To help understand why there will be delays, let's look at high-level "behind the scenes" about how works AirPlay:

  For the AirPort Express (AX), audio input is provided mainly by iTunes. Of course, it can also get feedback from other sources as you know, as of Rogue Amoeba's Airfoil.

  For streaming, iTunes or wing does most of the work. What is app reads audio content standard (AAC, MP3, audio books, Internet music streams, etc., it decompresses these file formats and creates what is essentially a raw, uncompressed audio stream.) This stream is compressed using Lossless Compression of Apple (via a QuickTime codec), encrypted with AES 128 bits and then listened (airplay) with an AXE. The stream is buffered for about 2 seconds until the stream is sent. The AX deciphers the flow, decodes and exports in a digital or analog PCM (using a built-in DAC) flows to its audio analog-to-digital versatile optical port.

  So, with the above, you can see that the tone does not simply move source to the destination without much more things. You will not be able to entirely eliminate the delay. Sorry!

• Time Machine periodically tells me it has not saved in two weeks

  I have an iMac and a time Capsule, which are the only three months old. For the most part, they work together seamlessly to provide backups Time Machine. However, twice now, even though I know that I had regular hourly Time Machine backups, my computer informs me that Time Machine has not backed up in two weeks. And no backup is available. Time Machine then immediately starts a backup on my Time Capsule that takes a few hours. Once that ends, everything is back to normal, and my story any backup is available for me that this is supposed to be. And resume regular backups as usual.

  What happens here? Is there anything I should do? Or stop doing? I'd appreciate any comments on this subject.

  The problem is the reliability of the system network Apple is not particularly good.

  Is the Mac directly related to TB by ethernet or wireless?

  Is the TC the main router of the network so this is to distribute IP addresses?

  The strange thing is that the internet still works, but the computer has lost the TC disk location and knows not where to find it again.

  For reliable TM backups on an iMac, I highly recommend using the USB... self powered 2.5 "1 TB or 2 TB drive can be connected behind the mac and invisible to the world... who will be always available for the local system... While his brother of network in the TC will fluctuate in and out of existence.

  Rather than flowing from my mouth (hand in this case)... Give me some screenshots of your configuration of TC airport utility.

  I would say that a weekly of abandonment is part modern equipment of domestic quality network. But every day, it's ridiculous. Back to life is a pain, restart the computer to do things.

  Tell us available to the entire network... this modem you have etc.

• Timer & events system process

  I usually use a "smart" delay dealing with the events, but I wanted to use a thread separate to process system events. Wording of menchar here, I feel that using a timer, it is automatically in a different thread. Is this true?

  A timer from asynchrous (in fact, all the timers async for a given process) runs on a common, separate thread.  A 'ordinary' timer is a Panel control that will run a reminder on the thread which instructed the Group of experts.

  Events system includes GUI events as I understand it, and these can be worked on the thread that the Committee.  Thus, on the face of it, you do not want to process system events using a 'regular' timer, not an asynchronous timer.

  I don't know exactly what will happen that if you did a process system events on an asynchronous callback to timer on its separate thread - some things may work, others might not.

  In the old days, CVI had a "processGUIevents" function, which was different from the function of "handle system events".  I don't know if CVI maintains this distinction much longer.

  I don't use a timer to make a smart delay, I put the thread to sleep and not the timing, rescheduling the thread after some time operating system.  You do not have a problem, unless you happen precisely set the 'smart' delay in a separate thread (a you created explicitly, or the CVI runtime provided thread timer async) and not expect to update the GUI, you have loaded on another thread.  I intend the delay "smart" to be used only from the main thread - which is the point of it, it allows the process to sleep but will react to user on the GUI input within a short time.

  It seems that the delay NOR will be spinlock, at least in some situations, and NEITHER was told that they treat events from the system during this period, at least in certain situations.  So, using the Delay(), NEITHER would have the same issues if use you some other thread than the thread that has loaded a GUI you are using.

  If your application does not have a graphical interface, there is no problem to use the smart delay on any thread, that I shouldn't think.

  I hope this helps.