Provisioning of the IOM users to LDAP groups

Similar Questions

• Provisioning of the IOM users to ldap SUN

  Hi all
  
  I had installed 9.1.0 and connector 9.0.4.1 SJSDS, IOM
  
  Whenever I create a user from the administration console that the user is configured for the ldap Protocol, the same when I change the first name or the name of the administration console is updated in the ldap Protocol.
  
  But every time I update the e-mail id of the admin console, it is not be reflected in the ldap Protocol.
  Is the "change email" or "e-mail update" does not get funded. (not sure what is actually)
  
  I also worked with SPML update profile web services, the same thing happening there also.
  whenever I have request a change of email ID, the value of the IOM gets changed, but he isn't getting put into service for the ldap Protocol.
  
  I hope my problem statement is clear.
  Please help me in this regard.
  
  Thank you.
  
  PS: I am very new to the IOM.

  Hello

  I don't remember default connector has the job of changing Email set in the deployment of the connector process if just do after validation.

  1. in Lookup.USR_PROCESS_TRIGGERS has the task to change Email defined in the research.
  2 validate the Email task change is defined in the process of provision of connector.

  If task change Email is not defined in the procurement process and then define and fix the adpater for updating the system target.

  Concerning
  Nitesh

• How to upgrade the IOM user profile fields after the reconciliation of target user AD

  Hello

  I have a problem of set-aside. When I'm changing the values of the attributes of the user in Active Directory and then I run Active Directory target user Recon, AD in IOM account attributes are updated only but I would like to update the attributes in the IOM user profile too. Please, how can I do?

  Thank you.

  Milan

  You can create a personalized card which is your AD attributes flow into the user profile and add it as a response to the task 'receipt of update of reconciliation. "

  Use the UserManager api to update the user's profile.

• Provisioning of the AD users

  Hello experts.
  
  I used the IOM for role APIs and creation of access policy, and when I grant this user role, "AD" resourse should be provisoned for him. Instead its provisioning status. And if I open all the fields are filled correctly, I click on save - then resource provisoned without errors.
  
  Yes, what's wrong? How to avoid this situation? Resourse should be assured without my 'Open-> Save' operations
  
  Help me pls.
  
  Thank you.

  Go to the defintion of user AD process

  Check the automatic backup here and save and Try Again.

  http://rajivdewan.blogspot.com/2010/07/system-validation-with-pending-status.html

• Remove the "Guest" user integrated security group "domain guests.

  We are running Windows Server 2008 R2 Standard.  I accidentally added the "Guest" user built into the 'Domain' security group invited and what you should now remove it to return the settings to how they were before.  However, everytime I try, I get the message...

  'The primary group cannot be removed.  Define another main group if you want to remove this one.'

  I had put the integrated group of "Guests" (including users 'Guests' integrated is a also a member of) to the primary group, however, the ability to set a primary group is grayed out.

  I hope someone has an idea?

  Thank you very much!

  Tim

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• The IOM user disabling

  Hello Experts,
  
  It's our problem:
  -We disable a user of IOM (so off its resources results)
  -We make a change in the attributes of the disabled user
  -disabled resources have still commissioning of the events, and the changes made to the user of the IOM is sent to target systems
  
  
  Why a change in the attributes of the disabled user is put into service also if the user resources are disabled?
  
  Thanks in advance,
  Best regards
  
  AT

  Why you change the STANDARD code. This is not suggested.

  What I'm telling you is this.

  If you open the map 'SAPU edit user' in console design, you'll see a java adapter task that is called to update data right... for example that his name is UpdateUser.

  Just before this, add a new task to java adapter that will get the status of resource for this user... say that card task name is getResourceStatus.

  Add a condition if getResourceStatus = 'Configured' or 'active' then call only the task of the UpdateUser adapter.

• Research of the IOM user-defined field

  Hello
  
  I installed IOM connected to OID.
  
  Now, if I want to create a new field defined by the user (in the creating user profile) to say... Employment-Band (and fill in the drop down for Job-band with the values A, B, C, d, etc), what steps should I follow.
  
  Edited by: Nelly Saluja on February 7, 2010 22:29

  Hello

  If I understand your question, you want to create a new UDF (user-defined field), I have the user profile for this to cretae a udf from the console design, in your case, you have to select the users in the form of name that you want to add a field in the profile.
  Select Search in the field type after that click on the Properties , you need to attach research corresponding to this in the the search code, for this, you must create a search with your values that you want to display the values. Here, you attach it.

  Hope this helps you
  Concerning
  VM

• user created the IOM must be synchronized in OUD to a separate ORGANIZATIONAL unit

  Hello

  I create user in IOM. When I create a user, it must also be created in a 'OU = Services"to the OUD.

  Sync LDAP is already enabled. Generally, when we create a user, it gets synchronized container Users OUD. We want to keep the users of this service separately for the best use of the organization.

  is there a way to do this?

  Please suggest

  Thank you

  Try this.

  Role = Service account

  OU = services, cn = users, dc = mms, dc = doi, dc = net

  Make sure user_type the user is "Service account" in the IOM user profile.

• Prevent users to register on the IOM login page

  Hi all
  
  I need to know how to remove the 'Register' and 'Track record' links on the page of connection of IOM. In my scenario, users will never have to sign up - they will be supplied with access to IOM auto. Thanks in advance.

  Hello

  You must change the system properties of the Administration advanced in the IOM user interface tab.

  The value "Is the self-registration permit" system of value of property to FALSE.

  Rgds,
  Maryse

• OIM 11 g Sending Notification on the creation of the user of the IOM

  Hi gurus!
  
  I have the following requirement: whenever a user is created in the IOM (via the Administration Console, request or through trust reconciliation) an email notification should be sent to the Manager of the user, informing him that his collaborator has a connection to (automatically generated) given user and a password (also automatically generated) and that must be changed the first time newspapers user recently created by IOM.
  
  I have seen that we have in IOM definitions of email (in Console design) and the Notification Templates (in the Administration Console).
  
  I tried to use the definitions of Email but I'm not able to select the usr_password field in the variables section so I couldn't use this solution which seems to be very easy to use because you can directly use the definition of enamel on the Notification tab in the tasks of process.
  
  Subsequently, I analyzed the Templates of Notification solution. I defined the XML of the Type of event and in the Notification template (in the Administration Console), I was able to choose usr_password as a variable of the notification. However, when I tried to develop Java code (class that implements NotificationEventResolver), although I was able to extract most of the IOM user profile fields, I could not extract the domain usr_password... It seems that the usr_password domain (which is encrypted) cannot be obtained from the UserManager service.
  
  How can I get the user password and inject into the email notification?
  
  Thank you very much!

  Check this: Re: decrypt the Xellerate user password and review the code posted here by me. Since you're using the resolver of notification, you can use the PasswordManager to get the password for the user in your code.

  -Marie

• How to propagate the password user IOM to a resource dbum.

  Greetings.
  
  I use OIM 11.1.1.3 and we put the dbum connector. The connector works very well. But I want progagate the IOM user password when the user changes the password.
  Someone knows how to capture the password change event and propagate the password to a resource of dbum?
  
  If the DBUM resource is configured manually the password changes to the database, but does not change when the user changes the password.
  
  Thank you
  
  Ramiro Ortiz.

  Hello

  Follow the steps below:
  1 create a conditional 'Change User Password"task in the process of dbum definition.
  2. connect the adapter to fill the password to process the form and then have a task more say 'update password '.
  in the same workflow for the password changed in the target system.
  3. Add an entry in the list of CHOICES. Search USR_TRIGGERS as USR_PASSWORD as code and change of password user as decode.

  I hope this will help you!

  Kind regards
  Raghav.

• Disable users from the IOM AND ALLOW THEIR MANUELLEMENT in OID...

  Hello
  
  I have connected to OID IOM.
  
  When I disable a user to the IOM, the attribute orclisenabled for this user is set to DISABLED
  Now when I change manually DISABLED active in OID and the task of reconstruction of target, the IOM user remains disabled and when I check the profile of the resources, the user OID resource is ENABLED.
  
  This should not happen. I want the case, when I manually ENABLE users disabled in OID and recon task, the user still needs to get disabled in OID
  
  Is it possible to achieve this condition?

  Hi Elise,.

  I think that the reason is due to the improver method to set the jar file. Simply copy the java code into Notepad and save it as java file only.Compile this java code so that you will get the java class. The you can create c like

  jar filename.jar javafilename.class cf

  Using this command, we can create a jar file. Just try it this way. I think that this will solve your problem.

  Thank you best regards &,.

  Rajesh.

• Adding users to a group of construction using the command line tool

  Hello
  Please forgive me if this is in the wrong category/forum, I can't seem to find one for Oracle Portal. I wonder if someone could help me with this issue please?
  
  I am trying to automate the adding users to a group of portal, entries already exist for users in the OID.
  With the help of the following ldapmodify command:
  
  ldapmodify h myhost.company.com Pei 389 - D cn = sleep w f /home/modify.ldif password
  
  where /home/modify.ldif has the following entries:-
  
  DN: cn = User1, cn = Users, dc is company, dc = com
  ChangeType: modify
  Add: orcldefaultprofilegroup
  orcldefaultprofilegroup: cn = groupname, cn = portal. 090112.174408.194907000, cn = groups, dc = company, dc = com
  
  DN: cn = User2, cn = Users, dc is company, dc = com
  ChangeType: modify
  Add: orcldefaultprofilegroup
  orcldefaultprofilegroup: cn = groupname, cn = portal. 090112.174408.194907000, cn = groups, dc = company, dc = com
  
  The ldapmodify script puts the specified group in the field "Default group" of the 'Edit portal user profile' page in the portal, which is fine. However it is not in fact add the user to the group. When I check the list of the members of the users group are not listed. Also the group is not listed under the existing users group membership "in the"Edit user"page. Also, when I try to connect to the portal as users, I get the error message "you are not authorized to perform this operation. (WWC-44131) "
  
  How can I add users to a group membership by using the command line tool?
  
  Thank you.
  
  M

  Your LDIF file must change the group entry and no input from the user.

  something like

  DN: cn = portal. 090112.174408.194907000, cn = groups, dc = company, dc = com
  ChangeType: modify
  Add: uniqueMember
  uniqueMember: cn = User1, cn = Users, dc is company, dc = com

• Reconciliation of the IOM is not updating after adding custom fields

  In Oracle Identity Manager 11.1.2 with connector

  Connector for Oracle Internet Directory version 11.1.1

  I close the IOM LDAP users, and after I add custom fields for the reconciliation of the target, and I try to update these users with the new event of reconciliation return of custom fields, this new custom fields poster in case page of reconciliation and not in the form user to LDAP.

  I already create the new form with the news of the custom fields associated with the application Instance.

  Solution:

  CVF (form Version Control Utility) comes with IOM that updates the form associated with existing users.

  With the help of the form Version control utility - 11g Release 2 (11.1.2)

  OR

  
  

  Update PROCESS_FORM_TABLE set PROCESS_FORM_TABLE_VERSION =(select SDK_ACTIVE_VERSION of the SDK where SDK_NAME = 'PROCESS_FORM_TABLE'); COMMIT; NOTE: Replace PROCESS_FORM_TABLE with process form real that is 'UD_XXX '.

• What is the trigger of the IOM process?

  What is trigger in IOM process? Please explain briefly? How to create the trigger custom?
  
  
  Thank you

  What is the trigger of the IOM process

  He decided to "what tasks must get triggered on the evolution of the field in the IOM user profile." Logic is already implemented in IOM and this requires a small configuration to add new triggers.

  Just to add a little thing in the commentary of Suren:

  You will find entries as in the research

  USR_LAST_NAME - Name of the task (task any name)

  It means so whenever there is change in the user's last name (USR_LAST_NAME) in the IOM then it will trigger all these tasks that are mapped in the search. You can have more than one task for the same domain.

  USR_LAST_NAME - Task1 (any task name)
  USR_LAST_NAME - Task2 (any task name)

  Suern shared the steps for the creation of new triggers.