Provisioning of the AD users

Similar Questions

• Provisioning of the IOM users to ldap SUN

  Hi all
  
  I had installed 9.1.0 and connector 9.0.4.1 SJSDS, IOM
  
  Whenever I create a user from the administration console that the user is configured for the ldap Protocol, the same when I change the first name or the name of the administration console is updated in the ldap Protocol.
  
  But every time I update the e-mail id of the admin console, it is not be reflected in the ldap Protocol.
  Is the "change email" or "e-mail update" does not get funded. (not sure what is actually)
  
  I also worked with SPML update profile web services, the same thing happening there also.
  whenever I have request a change of email ID, the value of the IOM gets changed, but he isn't getting put into service for the ldap Protocol.
  
  I hope my problem statement is clear.
  Please help me in this regard.
  
  Thank you.
  
  PS: I am very new to the IOM.

  Hello

  I don't remember default connector has the job of changing Email set in the deployment of the connector process if just do after validation.

  1. in Lookup.USR_PROCESS_TRIGGERS has the task to change Email defined in the research.
  2 validate the Email task change is defined in the process of provision of connector.

  If task change Email is not defined in the procurement process and then define and fix the adpater for updating the system target.

  Concerning
  Nitesh

• Provisioning of the IOM users to LDAP groups

  Hi all
  
  Product details
  
  OIM9101
  Sun connector90420
  Apache Directory server
  
  My requirement is
  to configure a user to the LDAP group based on information of the organization.
  Example of
  
  If only it belongs to the orgX, it must be made member of LDAP grpX
  
  If only it belongs to the orgy, it must be made a member of the LDAP grpY
  
  How can I configure my setup for the prescription above to be implemented?
  
  I am now able to make him a member of a LDAP group. But I wanted this group to select dynamically based on the Organization of the users to the IOM.
  What I have to write a rule generator adapter pre-filled to select the group based on the organization. How? Need help.
  
  
  Thank you
  
  concerning
  
  SAS

  1. create rules by using the name of the organization.
  2. create a group for each name of the Organization
  3. apply the rules of membership in each organization to place users into groups based on the name of organizastion.
  4 create an access policy for each group which has only the table entry of a child to the ldap group.

  your da!

  -Kevin

• IOM - OID! provisioning of the OID groups-QUICK HELP REQUIRED users

  Hello
  
  I installed IOM connected to OID.
  
  I've been assigned certain tasks:
  
  (1) creation of access policy such that when a user is created in the IOM, it is put into service in two groups in OID... ie. in cn = users and cn = employees (where cn employees = is the group I created under cn = Groups, dc = ad, dc = company, dc = com)
  
  (2) creation of an access policy so that when a user is created in the IOM, it is put into service two additional groups in OID, say I created two custom in IOM and membership rules groups attached to them. Now when I create a user meets the rule of two members, it is attributed to these two IOM groups and placed in service in the cn = users, dc = ad, dc is company, dc = com cn = group1, cn = groups, dc = ad, dc is company, dc = com and cn = Group2, dc = ad, dc = company, dc = com.
  
  I also want to fill these OID groups in a child table and create their research in the form of process
  
  Please help me to realize and understand these concepts.
  
  The task of the OID Lookup Recon for group works well, lookup.oid.group is populated with values.
  How can these groups be filled with child form process table (table of OID user group).
  
  Edited by: Nelly Saluja on February 12, 2010 12:51 AM

  As mentioned in my other post, you can make these groups in the form of access policy, and all users assigned by this policy will get these groups. Any question to go back.

• A good day! Make an order for the iPhone to your site, the provision of the code ' reservation number is: B2 * Q0A "many skills information. It is impossible to confirm the order. What is the problem?

  A good day!

  Make an order for the iPhone to your site, the provision of the code ' reservation number is: B2 * Q0A "many skills information. It is impossible to confirm the order. What is the problem?

  It is a support so nobody user forum here can help you. Maybe if you release with Apple itself.

  http://www.Apple.com/contact/

  There are links here to the online store.

• AAutomatic provisioning of windows AD users

  I've already created users in Active Directory (AD2012) and I would like to create the same user in windows2012 r2 as a windows user (so that I can connect to windows with this user, but RDS).  We could able to achieve using the Windows domain controller, but we are looking for other solutions.

  Is it possible to provisioning of automatic users to the windows of the pub?

  I've already created users in Active Directory (AD2012) and I would like to create the same user in windows2012 r2 as a windows user (so that I can connect to windows with this user, but RDS).  We could able to achieve using the Windows domain controller, but we are looking for other solutions.

  Is it possible to provisioning of automatic users to the windows of the pub?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I'll buy Adobe Creative Suite 6 Master Collection from a discount supplier and observe to install on my laptop and desktop PC (which is for my use only). The vendor said that there is no provision of the EULA to install double. What is the EULA

  I'll buy Adobe Creative Suite 6 Master Collection from a discount supplier and observe to install on my laptop and desktop PC (which is for my use only). The vendor said that there is no provision of the EULA to install double. What does the EULA say?

  A single user license allows you to have two machines with enabled facilities.

  Licensing and terms of use | Adobe

• How can I delete identifier apple of the previous user of my itunes on my ipad?

  Hello

  I am a teacher, and last year, I received several iPads for my classroom that had previously been used by another teacher.  I have reset the all last year and served under my apple without a problem ID.  However, this year, when I reset, they seem to have resumed to apple the previous user ID.  When I check in the iTunes and AppStore along with icloud, it's my apple that displays ID.  However, when I try to update or download apps, it shows the ID apple and request the password.  I tried to erase everything and reset, but the problem persists.  I can not sign it, because when I look at the ID apple mine is the one shown.

  Help, please!

  A kindergarten teacher stressed

  Unfortunately, you cannot delete Apple ID another user of these iPads. This person must connect with their Apple ID and remove it.

  What has happened is that these iPads have now been enabled for lock of Activation that will prevent a 'new' user to access. You may need to contact Apple directly, but if yes or no, can really help you is doubtful. Sorry!

• Glitch/Question of the root user

  All other encountered an error of password for the root user that uses a user admin instead account?

  Recently, I had to reinstall 10.11 on an iMac and went to create a startup disk. When I run sudo it asked for the root password (which is enabled) and kept saying "sorry, try again." I was sure I knew the password, but didn't so I reset the password of the root user. After the Reset Terminal still does not accept. I decided to user, my admin password and it worked.

  This is how it is supposed to behave or am I missing something? (Err is human but to REALLY screw up, run sudo)

  My Root user and the admin have the same password.

• Why Thunderbird 38.1 suddenly treat the addresses of the list in the form of individual addresses, & dismiss them because they are not in the form user@url?

  When you try to send a message to a group set up in my address book, I get an error message [group name < updated the group description >] is not an email address valid because it is not the form user@host. You need to correct before sending the e-mail message. Thunderbird has apparently taken the description section and tried to treat it as an email address. In doing so, it changes the description of and the original format [names, name2, name 3] (with the exception of the hooks) of [< name >, name2, "name 3" >].

  The list of mail has worked with no problems until today.

  Zenos. thanks for the suggestion. Although he did not provide a direct solution, he pointed me a. Being reluctant to try to re-enter an address book with more than 1,000 entries, I saved the book and replaced by a backup copy of a computer when I heard the e-mail function worked as desired. I had the same problem.
  I tried to export the book to save what I could at least and ran into problems, I discovered since came from trying to export "all address books.
  Then, I opened a copy of AB. File MAB in Quattro Pro, where I noted PS split the description section of the list of mail problem in separate cells, from commas in this description. I went back to the address book, removed commas from the description, and my group e-mail went out as gently as might be desired.
  I would note that commas have been this likely description for 15 years or more and only now has caused a problem. I guess that's due to some changes in Thunderbird was last updated. Would be nice if we got warnings about this kind of change.
  Answer to my problem: remove the commas from the description in the properties of the list.

• Crashes Firefox attempts to access the windows user profiles (maybe)

  After several relocations and other attempts based on comments found in the various positions in the solutions, I'm still stuck here. Firefox installs and works ok with high permissions (run as administrator), but crashes frequently then run normally. In normal mode it still crashes when opening the 'options' dialog box on: page preferences and when you download a file. It sometimes crashes when browsing. No high mode installation happens to 90 percent and crashes, elevated installation works very well. An explanation would be that firefox doesn't have access to C:\users\ < profile >------... at the level he needs, but I was not able to find out why. IE seems to work very well, and I reset the default security settings in IE. The signing of the accident say nothing useful about the reason. I adjusted all the firewall and down the ladder. Everything worked until I got other problems requiring aggressive edits and now all but firefox works. Basic navigation in firefox is ok, and work the plugins like flash and acrobat. So I was stuck on this for about a week, limping and try things. I don't know if it's firefox specific or something systemic, but it would be good to know what is the problem, so I have an idea how to solve this problem. Any ideas would be really appreciated. Thank you.

  So my next move was to create a new user account. The new user has been able to use Firefox normally. Several other problems existed with the original, but not as bad as Firefox user account. In any case, with user created a new account and the old one deleted, it seems once again things are finally normal. My guess is that some elements in the account data has been deleted, by something or someone, and Firefox to access, but did not check the possibility he wasn't there.

• created by the "other" user suddenly on my logon page?

  I have a mac and have two Admin user accounts in addition to the guest account automatically created by mac. I connect to an account in the other, and suddenly, I saw a fourth user account created named 'other' and has two areas, one for the user name and the following line for the password. I tried to connect using the account of origin on the mac and it allowed to connect. Does anyone have an idea how it happened? I've attached a photo for reference. Thank you

  

  Have you enabled the Root user for some reason any?

  Have you created a user 'hidden '?

• How can I remove "the folder/Users/user/to/mygame doesn't exist." Terminal. Rises every time I launch Terminal.

  How can I remove "the folder/Users/user/to/mygame doesn't exist." Terminal. Rises every time I launch Terminal. I am a novice. Thank you very much.

  1. Please select from the menu bar Terminal

  ▹ terminal preferences... ▹ Profiles ▹ Shell

  If the run command box is checked, uncheck it or enter the command to run automatically (if any), each opening of a Terminal window. Note: this is not how you define a default shell.

  2. If step 1 does not resolve the problem, see below.

  Back up all data.

  Select

  New Shell command ▹

  in the Terminal menu bar. Uncheck the box marked

  Run the command inside a shell

  If it is enabled.

  Copy and paste the following line into the text box that appears, and then press return:

  /bin/mkdir disabled_shell_files

  Close the Terminal window that opens. Repeat with this line:

  /bin/mv .profile .bash_history .bash_profile .bashrc .inputrc disabled_shell_files

  History Shell and former initialization files will be saved in a directory named "disabled_shell_files" at the top level of your home directory. It is normal that some of these files do not exist, and therefore, you will get error "no file".

  Close the window and open a new test.

  You may already know that files with name starting in '. ' are not visible in the Finder by default. So, if you open the folder that you created in the Finder, it will appear as empty, even if it is not. If you need to recover a portion of the data in the files of the shell, use a shell such as nano-based text editor (1). Make sure that you're not recreating the problem. Otherwise, you can delete the folder.

• Two thunderbird profile both at the same time with the same user account

  Dear Sir
  I would like to use Thunderbird two at a time for two different profiles with the same user accounts.
  I use linux OS.
  I thought using the:

  1. Thunderbird Pei Profile1 &
  2. Thunderbird Pei Profil2 &

  But at the launch of the second order, that nothing is happening.
  Appears in the foreground thundirbird already started.

  If possible use this configuration now or in the future nex?

  General rule, thunderbird runs only a single instance of a profile.
  However, there are two options, you can try.
  You can use an addon esily switch profiles:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/ProfileSwitcher/

  There's more help here:

  • http://KB.mozillazine.org/Run_multiple_copies_of_Thunderbird_at_the_same_time

  He said: "several instances is expected for debugging, so use it at your own risk.

  One method would be to use: start > run
  "C:\Program Files\Mozilla Thunderbird\thunderbird.exe"-no-remote Pei profilename

  There is a space before '-no '
  and also before '-P'
  followed by a space and the name of the profile

  You can create a shortcut icon to run each separate profile.

• I bought a used ipad. However, it seems that it is still connected to the old user account.

  Hello I bought a slightly used iPad delivered in my city; Kumasi-Ghana. However, it seems that it is still connected to the old user account. I couldn't so do my set up. Can you help me? The model is with DM * KYH A1475 as serial number. The FC ID is * and IC: *.

  < personal information under the direction of the host >

  It is locked on behalf of previous owners, you will need it to unlock, there is no other method.