proxy server is not meet windows 7 by sending to the address wrong (999)

Similar Questions

• The proxy server does not-Windows Internet Explorer

  After completing the windows updates, I started getting the following message every time I tried to enter in IE10: the proxy server does not-Windows Internet Explorer.

  1. try changing the proxy server settings in Internet Options > connections > LAN settings.  All the options are greyed out, cannot be changed.

  2. I checked that I am an administrator on the computer user.

  3. get the same error message, both wired and wireless configurations in.

  4. do you have a restore point at an earlier date - the same error.

  5A attempted to use Firefox 15.0.1 and I get the error message: the proxy server refuses connections

  My system:

  Acer

  AOD255

  Intel (r) CPU Atom N550 1.50 GHz 1.50 GHz

  1.00 GB OF RAM

  32-bit operating system

  Windows 7 Starter

  Service Pack 1

  Hello.. Please try following method to solve your problem.

  Tools-> Internet options and click the Advanced tab, and then tap on restore avancΘs to restore the default settings of Microsoft internet explore.

  If you still have problem

  go to tools-> internet Options-> Advanced-> Reset internet explore settings click on the Reset button.

• Laptop does not start... says windows 'the Proxy Server is not responding.

  Laptop has just received an automatic update of windows and after that, I get the message on the remote control unit does not accept the connection... I only put in place that I use a router w/data cable to connect two computers remotely

  Whasssup, "Jay"?

  Were there any changes made on the computer before the show?

  You can get this error if there is no proxy server is configured on the computer or due to a third-party program. Follow these methods to solve the problem:

  Method 1:

  I suggest you to follow these steps and check if that helps:

  1. open Internet Explorer.

  2. click on Tools and then click options Internet.

  3. click on the tab connections , and then click LAN settings.

  4. uncheck the option use a proxy server for your LAN.

  5 place a check on automatically detect connection settings.

  6. click OK twice.

  You can also see the article for more information:

  Change the proxy server settings in Internet Explorer

  http://Windows.Microsoft.com/en-in/Windows7/change-proxy-server-settings-in-Internet-Explorer

  Method 2:

  Refer to the article to verify if a violin is the cause of the problem:

  [Violinist] Difficulty "the proxy server is not responding" problem caused by a violin

  http://blogs.msdn.com/b/tfang/archive/2012/07/18/Fiddler-fix-quot-the-proxy-server-isn-t-responding-quot-problem-caused-by-Fiddler.aspx

  Let us know if it helps.

  Good luck, mate!

• The proxy server is not responding

  I have Windows 7 and IE 10.  I get this message every time I try to connect to the Internet: the proxy server is not responding.  It is not the modem because I can connect with other wireless devices.  When I try to fix it, I get the message: windows could not automatically detect the network settings of the proxy.

  Hi Sam,

  Were there any changes made on the computer before the show?

  You can get this error if there is no proxy server is configured on the computer or due to a third-party program. Follow these methods to solve the problem:

  Method 1:

  I suggest you to follow these steps and check if that helps:

  a. open Internet Explorer.

  b. click on Tools and then click options Internet.

  c. click on the connections tab, and then click LAN settings.

  d. deselect use a proxy server for your LAN.

  e. place a check on automatically detect connection settings.

  f. click OK twice.

  You can also see the article for more information:

  Change the proxy server settings in Internet Explorer

  http://Windows.Microsoft.com/en-in/Windows7/change-proxy-server-settings-in-Internet-Explorer

  Method 2:

  Refer to the article to verify if a violin is the cause of the problem:

  [Violinist] Difficulty "the proxy server is not responding" problem caused by a violin

  http://blogs.msdn.com/b/tfang/archive/2012/07/18/Fiddler-fix-quot-the-proxy-server-isn-t-responding-quot-problem-caused-by-Fiddler.aspx

  Let us know if it helps.

• Ie or firefox work on my laptop, all say that the proxy server can not connect. is this a virus?

  My network is fine and the rest of the functions of my laptop works fine, but the internet providers say that the proxy server can not connect. To my knowledge, the proxy servers are used to bypass the blocked Web sites, and I don't use them, although I don't know if this has nothing to do with the problem here.

  In Internet Explorer, click on Tools > Internet Options > connections > LAN settings and uncheck all the boxes. Boulder computer Maven
  Most Microsoft Valuable Professional

• Window of "research/fliter' for the address book stop working

  Window of "research/fliter' for the address book worked well until I tried today, v 31.6.0. (win 7) Just updated to 31.7.0 and still no search results. Typing in characters do not appear possible matches (name/email selected option). However, CTRL + SHIFT + F works very well in the address book search. How can I get the search/filter window to work as he did? Thank you.

  ajb328 said

  Window of "research/fliter' for the address book worked well until I tried today, v 31.6.0. (win 7) Just updated to 31.7.0 and still no search results. Typing in characters do not appear possible matches (name/email selected option). However, CTRL + SHIFT + F works very well in the address book search. How can I get the search/filter window to work as he did? Thank you.

• I am not receiving emails to my original via the address via gmail. Previously, either about a week ago, I received the e-mail from my original address but now am not.

  I am not receiving emails to my original via the address via gmail. Previously, either about a week ago, I received the e-mail from my original address but now am not. Maybe a very simple solution, but as a complete technophobe I don't know where to turn! Any help appreciated. Thank you very much.

  original title: loss of emails

  Try to access the web interface and see if you can see all the messages from there.  Otherwise, you may contact gmail to see if they can solve the problem.

  Steve

• Netflix cannot show films due to server or proxy server problems when using Windows Media Center. How can I solve this?

  I can access Netflix without a problem, but when I select a movie to watch and click on play, a window opens stating could not display the page, the server is not responding or is something wrong with the proxy server.  Try again later or contact your administrator for assistance.  I closed the program and all over again and still get the same message.  How can I solve this problem?

  Hello

  1. What is the exact error message?

  2. are you on a computer in the domain? If not, is that your ISP requires a Proxy Server client?

  If so, you should contact your ISP for Support of parameters appropriate Proxy Server client.

  If you are on a domain, you must check with the person supported on the local network to the appropriate client Proxy Server settings.

• While trying to install SP1a for Windows XP, the error is the following: server has not responded (Windows XP SP1a).

  Hello

  Recently, I reformatted and reinstalled windows XP on my old laptop. Looking to obtain service packs for it, I read that you need to start with SP1a... I did some research autour and many people are having the same problem, but nobody responded to the real problem. According to Microsoft, I install SP1a to install any other. The error is as follows: the server did not respond. If the server has been taken down or refuses connections. My internet connection remained active all attempts to access the server.
  Unless the information is wrong on the website, installation of SP3 won't fix it. All responses I've seen to this problem have been installing something you can't until you install first.
  Here is the link, in that it tries to connect:
  Connection to
  http://xpSP1.Microsoft.com/ISAPI/pstream3.dll/XP/SP1.USA.1106a.
  Here's the exact error:
  "The following error occurred during the installation of the Service Pack 1a attempted to download the files from the Service Pack 1 from the internet:
  The server did not respond. »
  Thank you.

  You should be able to download the Service Packs as a standalone installer at the following addresses:

  SP1a: <> http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=19751 >
  SP2 <> http://www.microsoft.com/download/en/details.aspx?id=28 >
  SP3 <> http://www.microsoft.com/download/en/details.aspx?id=24 >

  If you can not download to your computer, then use another machine to download the installation file and move it to your computer.

  You don't need to install SP1A.  XP Gold, you must install SP1A or SP2 before installing SP3.  I recommend that you start with SP2 and then SP3.

  "How to obtain the latest Service Packs for Windows XP"
    <>http://support.Microsoft.com/kb/322389 >

  HTH,
  JW

• Proxy server does not.

  I have some aging confuguring my proxy server.
  IE does not ask me for the username and password for the server after entering the name and port.
  Therefore, whenever I try to navigate, I'm connected to the server, but it blocks me saying: "authentication failed" because the username and password did not intervene.
  Why is this not to come and especially how it can be repaired.  I tried IE, Firefox and Chrome, with uninstalled Antivirus and always without success.
  Help much appreciated.

  Thank you.

  Managed to finally make it work.

  Go to Internet options > Security > Internet > Custom > authenticating user > automatic login with user name and password has been around.

  Password box came. :)

  Works fine now in Internet Explorer.  Impossible to get all other browsers to work but it's not serious.

  Appreciate the help.

• Windows live mail send error "the server does not support an SSL connection. Server error 250.

  Original title: Windows live mail error send

  Cannot send mail to Windows Live Mail.  Error message... The server does not support an SSL connection. Server error 250. Server - * address email is removed from the privacy *. Windows Live Mail error ID - 0x800CCC7D. SMTP Protocol.  Port 25.

  It's better, thank you. This message is not from the BT Server; It comes from your Avast antivirus which is intercepting your mail. You would be well advised to turn off the Avast Mail shield; It does not add any additional security if you don't by attention elsewhere, and can cause problems.

  I see that it is the record of mail in bulk that because of the problems in this case. Connect to the Web e-mail account and clear the items junk and deleted records.

  BT is recommended to use SSL, but your original question indicated that SSL was not taken in charge for SMTP on port 25. I think we'd better go on all your settings. Recommendations of BT are on this page: BT email: what are the settings for outgoing and incoming mail servers?, but they only work if you disable Avast scanning mail.

  Right-click on the account name in the folders pane, and then select Properties.

  • Under the servers tab, make sure that my server requires authentication is selected.
    Select connect with authentication in clear text.
  • On the Advanced tab, select this server requires a secure connection (SSL) for both servers.
    Make sure that the incoming (IMAP) port is 993 and port for outgoing (SMTP) is 465.

  When you've made all these changes, close Windows Live mail and wait five minutes for the program do its cleaning and save the modified settings. Then, restart the computer and make sure that the Mail of Avast shield is always off.

  Launch Windows Live Mail, then dial a new test message and send it to yourself. Post a new message in your response.

• With the help of my signature via a proxy server does not terminate but not from RIM

  I now use the signature Server successfully to sign sensitive data on the device

  associated with our application.

  However, when trying to sign full RIM signatures through a proxy server, and my

  Server deals in reality as well and even send emails of success, but the signing tool

  does not receive a final acknowledgement that he search and eventually times out.

  I noticed for RIM signatures that we are hitting servlets, while the default configuration value for our

  signature server is used.

  Is there something we need to do for our server works correctly when it is connected through the proxy?

  NOTE: everything works fine when the server is on the same network as the GIS tool.

  Thank you

  Mark

  It turns out that it's the server signature RIM as I expected.  It does not return the appropriate response headers.

  The server does only return HTTP/1.1 200 OKCRLF and then the payload.  We discovered

  If we put an Apache proxy before the server signature and after our proxy

  that it will accommodate the non-standard answer and mark the headers with a stored block transfer

  coding and then all is good.

  So the reason why the public signature RIM servers work through the proxy must be either because the bug

  This server is fixed or a proxy because Apache-like sitting in front of the signature server.

  I hope that this will save others some grief in the future.

  concerning

• DNS server is not meet and troubleshooting

  Hi I have window7 on my laptop and I have a problem with my internet connection everytime I swich to another router or access point .the problem, it's that I connect to the router but not the internet connection. After that I run the troubleshooter and I got this msg"DNS server does not respond"with an option for countinue troubleshooting. After completing the proccesss this msg appear "windows is reset the adapter wireless network" sometimes it works but if it doent I have to restart my laptop in order to reconnect to the network.

  10 x u to help

  Rony

  You can set manually 8.8.8.8 and 8.8.4.4 which are the DNS servers of Google, in this way, you are not relying on the router to get the DNS settings and pass on your laptop.

• I have windows server 2008 R2 and windows 7 32 bit on the same network. But I couldn't see the server on the network.

  I have a windows server 2008 r2 server and windows 7 32 bit on the same network.

  I couldn't see the server on the network and

  also I could not access the workstation to the server.

  not more than one device must perform NAT

  Hi Bruce,.

  Given that you are working on Windows server 2008 R2, please post your question here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• \\HOME-server is not accessible. A device attached to the system does not work.

  I use Windows 7 Professional. My network server is WHS V1.

  I have a shortcut on the desktop to \\HOME-SERVER on my W7 machine.
  All of a sudden it has stopped working.
  I get the message
  \\HOME-server is not accessible. You might not...
  A device attached to the system does not work.
  
  
  I searched in the WHS forums, a post suggested http://www.howtonetworking.com/Troubleshooting/notaccessibale0.htm
  I found that the command line net view \\HOME-SEVER gives (and by typing this in an address bar of the Explorer does not work)
  31 system error has occurred.
  A device attached to the system does not work.

  And this net view \\HOME-SERVER\Music gives (but in typing this in a browser address bar works!)
  53 system error has occurred.
  The network path was not found.
  However, net view 192.168.1.99 (my server address) correctly list the share on the server names (and entering \\192.168.1.99 in Explorer address bar works).
  I did a system restore until the problem occurred first to rule out any changes to the system.
  The problem occurred again.
  This means that my Sync Center shows none of my synchronization partnerships.
  Can anyone suggest the setting or service that must be corrected to solve system error 31 problem?
  TIA
  Hello
   
  The question you have posted is related to Windows home server and would be better suited in the Windows Home Server Forum.
  Please visit the below mentioned link to find a community that will provide the support that you have requested.
  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/
   
   
  Thank you