PS pixel for the CC checkerboard grid is not displayed correctly

Similar Questions

• BlackBerry smartphones phone replacement for the jpg.rem file may not display in media cannot send or save videos either Bishop or PC!

  That's happened?

  Everything worked fine until I had to get a replacement phone. It was defective. Now, with the new Pearl 8120 my old photos and vids are jpeg.rem and I can't see to media manager or when I remove the mini sd card and put it in my laptop. When the card is placed in my laptop, I can see the new photos and videos. But I can not display any type of media in the Media Manager. He invites me to enter my device password, as I enter, then it ask again, and it's still down 1/5. I click on the x to delete the password prompt box and then he said: my device is not connected. I don't see anything in what concerns my phone but I am able to see all my files via my laptop. Another question send videos. No longer can I save or send videos. I can send and record voice notes or images without problem. I removed the encryption prior to sending the defective phone back, or so I thought. So, I disabled encryption on my phone now and does not help.

  What can I do?

  I know that I need to format the card, but I want to be able to move all the files even the jpg.rem to my laptop without losing those files.

  Thank you!

  When the memory card is in your PC, delete all files that are named BBThumbs.dat. They are hidden so you may need to configure your Windows Explorer to see.

• The color of some images not displayed correctly

  A lot of png images are the wrong color. For example a page the png is green while they should be blue. On the page linked below the laptop and the person are bright pink. When I save the pngs and open them using other software (or use another browser) the colors are correct.
  I use Firefox 6 on Ubuntu 11.04 on a MacPro

  This may be due to a problem with the profile for your monitor screen colors or color profiles embedded in images.

  You can disable color management to test whether the problem is the color on the computer profile.
  
  You can set the pref to 0 on the subject gfx.color_management.mode: configuration page to disable color management.
  
  You have to close and restart Firefox for the changes to take effect.
  
  See:

  • http://KB.mozillazine.org/GFX.color_management.mode

  See:

  • https://developer.Mozilla.org/en/ICC_color_correction_in_Firefox

  Warnings: The new color QCMS management system introduced in Firefox 3.5 currently only supports ICC version 2 color profiles, not version 4.

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• Value of the URL parameter with: do not display correctly on the page

  Hello
  
  I'm working on a page with an interactive report. One report column is a hyperlink to another page (Page deletion). This link goes to an id and a title page delete such as its poster a confirmation message to the end user before to actually delete it. If the title contains a ': ' the text after the ":" is not displayed on the page (visible in the URL on top)
  
  Is it because that the ': ' separates parameters in a URL to the APEX and, therefore, the text after the ': ' is considered to be the following URL parameter?
  How can we solve this problem?
  
  Kind regards
  Priya Jetley

  A solution should be not only not to work with the parameters in the URL.

  Simply a process to pass values from one page to another as is:

  BEGIN
  IF: REQUEST = 'TEST' THEN
  P2_ID: = P1_ID;
  P2_TITLE: = P1_TITLE;
  END IF;
  END;

  In this case, your problem is solved, and it is safer because the user does not see what id is passed and can not manually put the id in the URL...

• documentation for the sequence file report does not display the parameters of the step

  The parameters of the step is missing in this report. Is it possible to add this just as you have included the sequence settings. Thank you.

  Sequence: MainSequence
  Type: Normal
  Disable the results for all stages: false
  Goto cleanup in case of failure: use the Station Option
  Number of installation steps: 2
  Number of steps: 10
  Number of steps of cleaning: 2
  Parameters:
  PartNumber String (by reference)

  -Stage: Installation Instruction
  StepType, adapter: Message Popup. 
  Description: NameOf (Step)
  Module loading and unloading Options: preload the beginning of execution, discharge the closure of movie file
  Record results: disabled
  Flow properties: Post Action:
  If)
  GoTo
  Record result: disabled

  I agree that it's frustrating.  I had the same problem recently.

  You should post it in the forums of idea: http://forums.ni.com/t5/NI-TestStand-Idea-Exchange/idb-p/teststandideas

  Or you can change the sequence that generates these and include parameters.  The source so that it is in: \Components\Tools\DocGen

  Hope this helps,

• Windows 8 when I move my mouse in the lower left corner of the upper part of the Bureau of navigation for the start page icon is not displayed

  Windows 8 does someone knows how to get the icon to navigate to the start page?  When I move my mouse in the lower left of the Office start page navigation icon does not appear.  All of a sudden it stopped working.

  Hello

  May I ask if clicking on the lower left corner always takes you back to the menu back? Or is that the disabled also?
  You might want to try this:
  1. Press the Windows key, then type "cmd", right mouse click on command prompt, then click "Run as Administrator". If you are prompted by user account control, just accept.
  2. At the command prompt with admin, type privileges window ' sfc/scannow ' or ' sfc/scannow ' also works. And then press enter.
  3. Wait a few moments so he can analyze the system files, you may need to restart then.

  Please let me know if it works. I hope this has helped.

• calendar for the week of jQuery does not work in the new version of firefox v42.0

  Hello
  Thanks for your reply.
  IAM develop on the issue that iam facing knowledge, events on the calendar for the week of jquery does not work in firefox version iam 42.0 faced to the problem that iam unable to change back or delete nominations that are displayed.
  For example if try clicking on one of the appointment generally a popup comes to change or to restore or remove the appointment but iam not getting that. But this feature does not work in lower versions of firefox (version 32.0 for example). Please check the jquery week calendar demo following URL looks like this:
  http://robmonie.github.IO/jQuery-week-calendar/full_demo/weekcalendar_full_demo.html

  I've just rescheduled lunch 12:00-12:15, so it seems to work on 42 Firefox on Windows.

  What is the latest version, where it has worked for you?

  Have you tested Mode Firefox safe to rule out the possibility of an extension conflict? See: Firefox in Safe Mode troubleshooting questions.

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• hp support assistant for the new version update is not installed

  HP Pavilion Slimline s5306ukP; Monitor LCD 20-inch HP 2010

  My problem is that I recently had a HP Support Assistant alert to download the new HP Support Assistant for the latest features.

  Well I tried to download the update, but it would not install? I'll go through the events on the screen and maybe you can inform me as to why this update for the new Assistant support will not correctly installed, thank you.  Everything goes up to 4. Then it will skip "Download updates" and go on 5 /, but nothing happens?

  Point adjustment 1/restore... pass; 2 disk space / audit... pass. 3 / connecting to HP services for new updates and alerts... pass. 4 / download updates... N/a; 5 / install/apply the selected items... no?

  Should I have to uninstall the version that I already have the update through and re - install a new Version, or you have any patch that can be applied to make this update installs successfully?

  I have Windows 7 Home premium 64-bit.

  Hi DP - K,.

  I tried again since my last email with the problem where I couldn't find the program once it is downloaded, and alongside the race/Save little was downloaded files. I clicked on it and watched the sp54931.ex download in a folder "view and track downloads. I then told run this and asked that my administrative password. I thought here goes while I'm waiting for a response from you, nothing to lose to new and low and here is the update for the new Version HP Support Assistant downloaded correctly. Since then, I had a glance in the desktop program and there is no warning, everything is up-to-date.

  If all is well now and I can't thank you enough for all your help to try to solve this problem for me. You are the experts, and I was just lucky. I sincerely thank you.

  Best regards

  Gerry

  PS I will now know where to go if I have more problems... experts.

• had this message for the 1st time on windows, not sure if its real? performancewreckcontrol.in

  had this message for the 1st time on windows, not sure if its real?

  Hi Netbook,

  This isn't enough information.  What is the exact message and any word to Word with all the codes?  How it was received (a pop-up, aredirect, an e-mail (if so, what he want/say - leaving out personal information about you)?)  What were you doing when it was received?  Do you know what program sent you him?  What operating system?  What browser and version?  What security programs (names and versions of all of them?  The message say?  When it seemed (start-up or during work)?

  Here's help on how to respond to that and other information necessary to understand: http://support.microsoft.com/kb/555375.

  In the meantime, I would do anything he asked and guess that it's a scam, spam, malware and/or until we prove otherwise based on your comments.

  Thank you!

  Kosh

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might have caused this. .

  We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might have caused this

  My pc does not have a hard drive. I can't restart in any mode.

  Hello

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  · What options have tried advanced startup options?

  Remove all external devices such as printers and scanners connected to the computer and then try to start.

  As you mentioned you don't have a CD/DVD drive on the computer and you are not able to boot in any mode, there are only two options:

  a. you will need to connect external CD/DVD drive to the computer for further troubleshooting.

  b. you must contact the manufacturer of the computer.

• forgot my password for the administrative account.i did not a password reset disk. AlSi o do not have a disk to recover. How can I reset my password or put them on the administrative account? __

  I don't remember what my password for the administrative account.i did not a password reset disk.  AlSi o do not have a disk to recover. How can I reset my password or put on the administrative account?

  If you have forgotten your password, if you have another user who has administrative privileges account you can log in to that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  If you reset the password of the account administrator integrated into house or have Pro and don't remember the password, use NTpasswd to change the password of the built-in to a white administrator account. Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/pnordahl/ntpasswd/

  Then, go to the user accounts applet in Control Panel and set passwords that you remember and other changes. WRITE THE PASSWORDS DOWN AND PUT THEM SOMEWHERE YOU WON'T LOSE THEM.
  MS - MVP - Elephant Boy computers - don't panic!

• We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might caused ha this.

  We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might caused ha this.

  Hello ILO,.

  1. When you receive the error message?

  2. are you able to boot to the desktop?

  3. did you of recent changes on the computer?

  Method 1

  If you are unable to start windows check to see if you can boot into safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are able to boot into safe mode then I would suggest that you do clean boot and check.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Header download for the 'sent items' folder did not complete. Cannot select "Sent items" on the IMAP server. Error number: 0x800CCCD2

  original title: error number: 0x800CCCD2

  Can anyone help with this issue:

  Header download for the 'sent items' folder did not complete. Cannot select "Sent items" on the IMAP server. You could try refreshing your folder list to synchronize with the IMAP server. Account: 'AOL', server: 'imap.aol.com', Protocol: IMAP, server response: "SELECT failed", Port: 143, secure (SSL): no, error number: 0x800CCCD2

  Thank you!

  Hi again Steve - I have spent a lot of time on the phone this morning to Dell technical support. the accompaniment of the victim and I did a lot of fiddling around with various options of Windows Mail and I don't know exactly what we were doing, but the issue seems to have resolved itself! Thank you for your time and trouble.

  Best, Douglas