Secondary and primary VI simultaneously

Similar Questions

• Display headaches! My external monitor is labeled as default, 1 and primary.

  Hi I am using Windows Vista Home Edition. I use an external CRT monitor with my laptop for several months without problems. To connect the monitor external, all I do is check the button "to extend to this monitor" and then 'apply '. I can then move windows external monitor and watch movies.
  However, since yesterday my laptop does not display images. I put on the external monitor and noticed that my desktop, icons, etc. were all on the external monitor. Even worse I have when I go to display settings, I see that the external monitor is labeled "default monitor." On the Nvidia Control Panel, it is presented as 'primary monitor' and has the number 1. When I try to set my laptop as primary on the Nvidia Control Panel it displays a dialog box won't let me change.
  To my surprise, I now have to check the button "to extend to this monitor" to see the images on my laptop, which is an empty office with a blurred image and color. I also have to move the mouse to the left of the CRT monitor to my laptop screen, the complete opposite. When I click on "identification of instructors" it shows my 1 CRT and my laptop 2!
  It's crazy! I need my laptop to stay on the screen by default, number 1 and primary. But it now appears that the CRT has taken over as my main screen.
  When I power off, unplug the CRT and powered, the display reverts to my laptop. But as soon as I connect the CRT to my laptop, my laptop screen turns off and the CRT takes over.
  I would really appreciate a help of a guru of computing or a person who has had a similar problem but has overcome.
  Thank you very much.

  Hi, Matter333,

  Did you add new hardware or software?  Have you tried a system restore?

  Try to uninstall the driver for the monitor

  Reset

• Is possible to listen to music through external speakers or headphones and computer speakers simultaneously?

  What I mean is that I can have his two pc speaker and external speakers?

  Hi Amiroof,

  ؠ Are you problems trying to play sounds of all stakeholders?

  No, it is not possible to obtain a laptop speakers and external speakers simultaneously. Computers laptops very few take simultaneous audio output by both headphones and external speakers. You may need to check with your computer manufacturer or read the manual to confirm.

  I hope this helps.

  Bindu S -Microsoft Support

• How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

  How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

  Hi João,.

  To help solve the problem, remove the PC from the domain and then connect the computer to the domain.

  Click the Microsoft KB Article below for troubleshooting steps.

  The trust relationship between this workstation and the primary domain failed

  Let us know how it goes.

  Thank you

• N1k both secondary schools primary list with no Stand-by! What should do?

  Hello

  N1k both secondary schools primary list with no Stand-by! What should do?

  It was closed Port!

  all are ok now

• How to enable and disable a simultaneous program to a Pl/sql Package

  How to enable and disable a simultaneous program to a Pl/sql Package

  I just want to know why this not prvent not the program to run, it updates the backend for open State helped N, but not in Frontend.

  If you can advise on the same.

  Did you use the API to change the ENABLED_FLAG of 'Y' "N"? If so, you commit the changes? What happens if you ask this program contributing to the application (simultaneous > program > set), can you confirm that it is disabled then if this has been done since the backend? The program remains active after the deactivation of the application it?

  Thank you
  Hussein

• Opening Subvi in secondary and manage events

  Hello

  I'm trying to run a code where I have a "hand VI" with a header and a secondary. I change the value of the selector in the header, the secondary should show a Subvi. In the Subvi I buttons that will generate random numbers for indicator 1 (slot 1 - VI) and for indicator 2 (2 slot - VI). The idea is, as I push the button for the generation of random numbers, the indicator will be updated even if the Subvi has currently shown in the main VI high school is not the one that contains the indicator which will get the new random number.

  I created the cluster of references (type strict def) to make things easier. Find attached a zip file. Decompress all the files in one folder and run the VI.vi initialization file. An error message (1001 - front panel is not open) will pop up and the hand VI.vi doesn't open, that it could supposed to.

  I changed 'Appearance of windows' by default, dialog box etc and almost all tried, but I don't get the desired result.

  Of course, this code is just an example to show what I want to achieve, that is why it is so simple.

  Thank you all.

  Dan07.

  You definitely need this structure?  Normally I would expect main to be the top-level VI and initialization to be a Subvi.  If you are not restricted to this particular structure of the VI, you could perhaps describe the effect you want to achieve and let others think about how you might accomplish it, rather than describe the desired implementation.  For example, in your current structure, you know how much possible subVIs you can embed in the secondary.  Given that, it may be easier to place a control tab on the main façade and hide tab selectors.  Assign a single page each slot - VI - either integrate a Subvi to each page, the controls for each page that correspond to those required by this Subvi is implemented.  Use the enumeration as the tab selector.

• Can SCXI 1102 measurement of current and voltage signals simultaneously?

  This may be a simple question, but I have a pair of moisture sensors that output 3 x 0-10 Vac @ 10 my max of signals that will be connected to a test loop that will have also a pair of sensors of flow as 2 x 4-20 my output signals, and I need to know if I can connect all four sensors on the same card of SCXI 1102 with endings of 1300 block , or if I need separate maps for the voltage and current signals. I am also looking at extra material for the other sensors, so I can have a different card if it will do the job better.

  Thanks in advance!

  BBalmforth Hey!

  If I understand your description of the system you want to measure tension through the moisture sensors and known for flow sensors simultaneously.

  Absolutely, this can be done with the 1102.  In the pilot DAQmx can we individually select the channels to read the voltage by the moisture sensors, and then choose the appropriate channels to read the current of the flow transducers.

  Let us know if there is something else you need said.

  Happy holidays!

• WIFI and WWAN connected simultaneously

  I have a W510 and both WiFi and WWAN works but not at the same time. I tried to change the configuration several times but I do not operate at the same time. If I connect the WiFi when WWAN is running, the WWAN is disconnected. It's like WiFi replace the WWAN connection and internet connection turns of (IE WWAN). I use the printer WiFi connection and I don't want to turn/on the WWAN connection, whenever I want to print something.

  1. is WWAN and WiFi supposed to operate simultaneously?

  2. If so, what is the WWAN and WiFi configuration in 'Connections Acess'? (Could you please add a screenshot of the configuration)

  / Hans

  I tried with AC and it did not work. I then uninstalled AC and tried Ad - hoc only with win7 and I couldn't make it work. Then I discovered that Intel have a solution called Intel MyWiFi and after installation, it worked perfectly. The software allows the computer create a PAN and Wi - Fi devices can be connected as connect to a normal router. Of course the network works as long as my computer is running...

  / Hans

• NAC L2 and L3 Inband simultaneously does not work

  Dear all,

  I have a problem with the simultaneous deployment of L2 and L3 of the NAC.

  I have a CASE that is configured as a real IP gateway, broadband. Previosly, I can have the NAC working on L3 deployment using PBR. I configured the ACB on distribution switch in order to intercept the traffic of untrusted user NAC.

  Now our society tries to add wireless, using WLC, who have the interface vlan configured in CASES not reliable (using the section "managed subnet" on cam). the wireless run perfectly, they able to authenticate to the NAC and able to connect to the network after the authentication of the NAC.

  But now users of L3 cannot reach the unreliable for performing authentication of the NAC. The CASE cannot ping even L3 user which was previosly correct.

  Is there a limitation on Cisco NAC for the deployment of L2 and L3? I read Cisco that a single CASE can be configured to L3 and L2 UNLIMITED so I should work

  TQ
  Imad

  Imad,

  The way you described work is pretty close to the way in which we would have put in place.

  Glad it works for you now!

  My ' salam.

  Faisal

• Removal of archives on Standby and primary

  My scenario:

  RDBMS 11.2.0.3

  I want to put this, but some input from you guys.

  RMAN delete on primary policy: CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;

  RMAN delete pending policy: CONFIGURE ARCHIVELOG DELETION POLICY to APPLIED on STANDBY BACKED UP 1 TIME FOR 'SBT_TAPE ';

  Rman backups are taken on the strip of the main server instead of the day before. and I wanted to know if it's the best way to avoid to get the archive deleted before sent and deleted once applied on the Stanby site.

  
  

  
  

  Hello;

  N ° if you take backups on the primary then I would change the DELETION STRATEGY on letter waiting.

  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;

  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY;

  Or use this

  Remove the Archivelogs applied on the physics of the standby database

  Best regards

  mseberg

• Trigger Composition layer fade-in and .oem animation simultaneously with mouseover

  Hello

  I created a button with a mouseover on board animation animate exported as one. OEM package. I'd like to simultaneously trigger the animation and a composition of discoloration on the passage of the mouse on the. OEM file. I only managed by triggering one or more rather than connect to the animation. How can I get both I not trigger simultaneously? Is there a plugin to achieve this in third or Muse will do it natively somehow?

  Thanks for your help,

  Mike

  Hi Mike,

  OEM of Muse was dismantled by Adobe to animate CC and they not him have not yet set.

  • have you tried to put your button within a State?

  

  another book would be about to paste text in Muse and then use this image to build your button autour... google "Binder in iFrames with Adobe Muse" for the various ways to do

• Primary and primary physical Standby with an incomplete configuration

  What could be difficulties if the primary database is not the FAL_CLIENT configured on the primary database to point to itself?

  I understand that you must have on the primary:

  fal_server = < physicalStandby > and

  fal_client = < primaryDatabase > don't default fal_client in primary?

  Good point.

  fal_server =

  fal_client =

  And then pass them after a failover of coherence and transparency.

  Thanks Marshall!

• Running the old and new Vcenters simultaneously on the same San

  We spend VSphere 4.1 to 5.5. We are very weak with only 3 hosts running about 20 comments of the virtual computer on a San.  Our former VM VCenter is always on Win 2003 and I am changing as well.

  So instead of doing an upgrade from 4.1 to 5.5 and convert the former vcenter 4.1, we decided to simply fill out a brand new VSphere 5.5 installation to a new server we have.  We have also installed a Vcenter 5.5 new appliance as well. So, essentially, we have installed two different vcenter, old and new running.  Then, we plan to move hosts esxi 4.1 existing in the new Vcenter device manually.   Then eventually fly over the guests of a host in the new box and then wipe and reload each older host with 5.5

  So I've already finished the first half of this project.  But I have a question.

  During the passage of Windows VCenter 4.1 to the new host esx and VCenter Unit 5.5. I run two VCenter (ver 4.1 and ver 5.5) simultaneously for a short period of a few days.  We're still running on the host 4.1 old and the new vcenter 5.5 running on the new esx host 5.5.

  We will walk a host both the old VCenter and will be added to the new Vcenter 5.5 appliance.  But I'll share my SAN alone of course. If I do this and the two versions of VCenter (old and new) running at the same time and sharing my data SAN even stores at the same time, are there problems with it?  I don't think so, but I'm not sure.

  I installed the first new esxi host and I pointed out to my warehouse of SAN data without any problem. And data warehouses has appeared as they should.  But when I add the new host for the new VCenter, as part of the installation process, it displays all relevant San warehouses.  I thought it was weird to show during the 'Add host' vcenter.  Are there restrictions to running two VERSIONS different VCenter simultaneously on the same data warehouses?

  Thank you.

  HMorris

  You can have multiple instances from running in the same environment vCenter server. What you need to take care of, it's that the ESXi hosts that share the same warehouses not have access to each and other virtual machines (i.e. do not add VMS to multiple hosts). Keep in mind that only VMFS3 data warehouses are available in two versions, do not pass the VMFS data store to VMFS5 when running always hosts v4.1.

  > as part of the installation process, it displays all relevant San warehouses

  That's ok. When you add a host to vCenter Server it will show that all connected, as well as the VMS data warehouses that are stored on this host.

  André

• References and primary key

  Hello
  I'm trying to greate a new data store and the columns in my oracle Database 11 g. ODI-> new MODEL-> genereate DDL.
  Now, I want to create a new one with primary keys and references, but I can't find the option setting.
  Is it possible to choose this option?
  I work with the German version of ODI.
  
  Concerning
  Michael

  extend the store data, click constraints folder, right-click, and click new key. Now you can select the type of key and on the columns tab, the key columns can be selected.