PSC disconnected in MAX but meets the UDP broadcasts

Similar Questions

• Just bought 6 Lr at Office Max, but redeem the Adobe code is "invalid" when I get it

  I bought Lightroom 6 at Office Max.  I entered, seized the number, and I get message "code is invalid" when trying to enter.  The customer is the frustration very - been waiting for a show to chat with while about 20 minutes.  This is not the customer service stronger given Adobe price of admission fees.  Please notify.  Thank you!

  Thank you for your response. I ended up spending 2 hours with adobe 24/7 response team, including wait times and I still it has not resolved. Not exactly stellar service.  I went back to the store and am about to download the software.  Wish me luck - and by chance I won't incur adobe "customer service."

• Use Firefox all the time, but on the page where it tells you what plug-ins are oudated there is a message saying that I do not meet the requirements to run FF.

  I have an iMac. Mac OSX... Version 10.5.8 I had Firefox installed for a long time and use it more often than Safari these last time. However, when I'm on the FF page where it tells you what plug-ins are very good, and which are outdated (with a warning), at the top of the page, there is a message saying that my computer "does not meet the requirements to run Firefox. And yet I have it and use it! Maybe the message actually means that I can't upgrade to the latest version? But also I don't know if I should go ahead and try to download plug-ins up to date. Any input would be greatly appreciated. Thanks in advance.

  You can also
  Try to update to 10.6 and more if your computer supports (costs less than a new computer)

  • https://discussions.Apple.com/thread/4537537?start=0 & tstart = 0

• El Capitan 10.11.2 disconnects from the network of Canon printer macbook pro after each use but with the same OS version iMac remains connected

  How to prevent my Macbook Pro El Capitan 10.11.2 going to disconnect my network printer Canon?   My iMac running the same OS version don't unplug and behaves like any normal wireless connection.  I deleted the printer and added back, reset printing, etc. nothing works.  Given that the Mac is 6 "each other and 5 feet of printer during the last test, it must be something specific to the Macbook.  The Macbook identifies the printer after each reboot the printer as printer Canon right, but once the task is completed does not have the printer.  Everything is on the same wireless network. Computer Windows also recognizes the printer and it keeps alive after printing.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• My integrated Webcam is recognized by MAX but not as the IMAQ device

  Hello

  I use with 2014 LabVIEW IMAQ 14 and IMAQdx14.

  I am able to use my webcame MAX both in the Vision Assistant, but when I am trying to generate vi, in the wizard, IEEE1394 Imaging is grayed out.

  When I am using triggered image acquisition and select cam0 as the name of the interface (name of my camera to the MAX), I get the error code:-1074397163 (NOR-IMAQ: the session or the interface passed is not valid.)

  In MAX, I can see and use my camera, but it appears directly in the devices and Interfaces (and not under devices NOR-IMAQ)

  I can't find out if it is compatible live show... Is this to say that my camera is not supported by IMAQ? Is there a way to check whether LabVIEW?

  Thank you

  Karol

  Hi Karol,

  Since you are able to use the camera in MAX, it is DirectShow compatible. The reason why you get this error, it is that your device is not compatible with the IMAQ driver. Instead, you should be using the driver IMAQdx and corresponding IMAQdx live. Once you use those, you should be able to control in LabVIEW. It isn't an IEEE 1394 device either, so I think that it is expected that all options for this would be grayed out. Hopefully that should get you going in the right direction, but please post again if you have problems with the generation of VI you.

  Thank you

  Katie

• Camera works to the MAX, but not in LabVIEW

  I struggled a lot with getting a camera DCC3240M of Thorlabs working in LabVIEW. The software supplied (Thorcam) works as it should. However, the LabVIEW SDK does not work as it should, it gives an error 155 "the operation is not supported.

  Instead of the SDK software, I tried the drivers for DirectShow and now the camera arrives in MAX and works as it should. He also appears with IMAQdx list Cameras.vi and in Vision Acquisition Express vi. BUT when I try to run IMAQdx open Camera.vi or the Express vi it does not work. Open device gives a DirectShow error code 0 x 80040275 "no capture hardware is available, or the hardware is not responding." And when I try to select the camera in the express vi, a red icon is displayed and I can only choose "Cancel":

  

  It's really very annoying that the camera obviously work with the drivers provided, but I can't use it in LabVIEW.

  I would be grateful for any ideas what is wrong. I'm running LabVIEW 32 bit on 64 bit Win8.1.

  Problem solved!

  I carefully removed all the drivers that came with the camera and then I installed the drivers from manufacturers (IDS) instead of Thorlabs drivers. And now it works, the camera always appears in MAX and it does not work. But now the supplied screw. I'm so happy. It took me a week to understand.

• Not recognized USB-6251 (detected) to the MAX but is detected by the Windows 7 Device Manager

  Does anyone have a solution to our problem?

  USB-6251 is not recognized (detected) in MAX but is detected by the Windows 7 Device Manager.

  Is our configuration: Windows 7 (64-BIT), DAXmx 9.3.0f2, MAX 4,8 and USB-6251 (S/N 12B647A. P/N 194929 D - 04 L)

  We had a 'ready' indication/led the 6251.

  We tried several things... (all do not work)

  1. we have installed DAQmx 9.3 (for Windows 7)

  2. clean MAX Database by the following

  http://digital.NI.com/public.nsf/WebSearch/86256F0E001DA9FF86256FFD005B827C?OpenDocument

  Michael B.

  Yes the 6251 appears as a DAQ hardware.  Device charger OR placed in the auto-start services window.  We have refreshed MAX.

  Success!  I had to manually start the device loader.  Even if the service has been set to autostart, it did not work.  Right-click on the service shows that the beginning was selectable.  Click Start and the service began.  Start to MAX and can now see the device.  Open the front panel.

  How does the monitor devices OR running in the interface of the status bar to the device loader service?

  I don't understand why the service was not working.  Is it a security issue?  I am logged in as administrator.  I'll try once again as a normal user.

• Why did the counter works in MAX, but not of Labview?

  Please help, I've been away from Labview for more than 3 months and I'm pretty rusty...

  Last year, I configured successfully NI9401 to measure the period (in seconds) by counting the rising edges of my sensor signal.  Since then, I bought a new PC and loaded all my software inside, including the Labview VI that has worked successfully on the old computer.

  I can see the digital signal using MAX and test for the NI9401 Panel, then, I know that my son and my TTL signal is OK, but nothing except the below error when I try to run the attached VI, happens...  How can I say this VI to search for the signal on channel 14 and MOD3/CTR0?

  Thank you. I'm sure it's a small adjustment... it worked well a few months ago... do not know what the problem is now.

  Thank you

  Dave

  OK, now.  Solved the problem. The vi is fine, but some fragile son have been identified... worked in MAX but not in vi.  Now that the connections have been tightened, it works for both.  Sorry for the inconvenience.

  Dave

• Connect the PS module. I get the module to the MAX, but can't seem to read from this module

  Hello

  I'm back to LV and was trying to change an old Win98 computer to a new one with XP. The program should contact FP-1000 (+ FP-TC-120 and FP-TB-x) through serial ports. He finds the data with MAX and them can read. But when the program, which is set up like that (only changed the port serial numbers), try to read, he cannot do so.

  It is worth noting that the program is able to write via a serial port to a eurotherm controller, but not to read that as well.

  The errors are:

  Reading VISA: 0xBFFF0072

  VISA read: 0x3FFF0006, both are made in PS Read.

  Why is it so? Errors are read out OR spy. I tried to set up the connection using NOR-Serial Troubleshooting Wizard, but it does not find the material although MAX may.

  Kind regards

  thomasho

  It fixed...

  A source of inspiration here:

  http://forums.NI.com/T5/FieldPoint-family/communication-failure-FP-1000-module-with-serial-Connectio...

  and I see now that it wasn't a necessary position.

  Basically, the problem was that I changed the read FP FP advice and for some reason that it worked... Don't ask me why...

  Concerning

• Instrument to appear in MAX, but not in the executable file

  Hello

  I use two HP34401A make some measurements, and I transfer the program to a laptop with complete labview at your desktop with only the runtime engine.  Instruments made their appearance in the Office MAX, but when I run the executable, they cannot be detected.  I expect some suggestions on how to possibly resolve this problem.

  Thank you

  Not to mention that MAX, what other driver is installed and necessary? Did you install NI-VISA, NI GPIB? At a minimum, you should include NI-VISA in the installer that you built.

• Bluetooth mobile keyboard 6000 cannot match in windows 7 - I get a pairing code, but the keyboard does not meet the entry

  the keyboard connect Windows XP very well, but after the upgrade to Windows 7, I am unable to pair. I can generate a pairing code, but the keyboard does not respond. Suggestions?

  Hi Amberlina,

  This problem may be caused by damaged or incompatible drivers. I suggest you to consult the help articles and check if it helps.

  Troubleshooting: keyboards

  http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/keyboard/wireless-Bluetooth

  I can't get my device to pair with my computer.

  http://www.Microsoft.com/hardware/Bluetooth/en-us/default.mspx

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Cannot send the UDP datagram with device 8320 (V4.2.2.180)

  There is a post says "Cannot send the datagram UDP with JDE 4.5" to

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=14528&view=by_date...

  In the emulator of JDE4.2 it really works, but he meets the same problem in the blackberry8320 (V4.2.2.180) device, get the same java.io.IOException (detailMessage = null) to the send() operation;

  I looked in the (accessible via wifi) PC with a tool named Sockettool (it can create the client and Server TCP/UDP), it can be connected to the emulator and receive datagrams sent to the emulator, but can not be connected to device.

  Is this a problem related version too?

  Appreciate if you can share your experience with datagram connection to the device.

  Here is my code:

  Emulator: host = "udp://iport1; port2.

  Feature: host = "udp://iport1; port2 /; = wifi interface.

                  try {
                      udp_client = (DatagramConnection) Connector.open(host);
                      byte[] data = {65,66,67,68};
                      int len = data.length;
                      dg_out = udp_client.newDatagram(data, data.length);
                      udp_client.send(dg_out);
                      udp_client.close();
              }catch (Exception e) {
                      System.out.println("UDP Exception:"+e.getMessage());
                  }
  

  If the application is able to send and receive UDP traffic in the BlackBerry Simulator, but not on a BlackBerry real pocket computer the first thing to check is to check that your carrier supports.  Several carriers do not support UDP traffic or restrict to specific ports or data types.  This can cause exceptions or make it appear that the application will silently fail (carrier is just dropping packets).

• HP ENVY series 7640: impressions, but not the attachment by e-mail

  While I was away from home, I tried to print a document that is in the Pages for my husband.  I can access the Pages of my iPhone and send it to my printer, but all that prints is the email and not the attachment.

  I can't send the document directly from pages, because it does not print.

  How can I be remote, and print a document for him?

  Hey @Onefidget, thanks for joining the community of Support HP, I would be happy to help you.

  I understand that you are able to print an e-mail using ePrint, but the attachment does not print. Please take a look at the PDF below for if make sure respect you the types of files supported and messaging clients: HP ePrint specifications.

  Please let me know if your attachment meets the specified supported file types and from there, we can continue.

  I'll watch for your reply.

• Qosmio F60 - no tuner partitions to meet the current demand

  Have a Qosmio F60 with built-in TV tuner. Running Windows 7 64 bit. I have install the TV tuner a few weeks back and it have not used much since. Windows Media Center is now "no tuner partitions to meet the demand for courses". Since the establishment of the tuner, I installed Pinnacle Studio 14 Ultimate Collection and, of course, the list of updates of Windows.

  I do not see the tuner in the material or the other list, but then I don't know if I'm supposed to.

  > TV Tuner does not appear in the list of devices. Yesterday, I was able to visit a retailer and check that the Tuner on an identical machine is listed in the list of legacy

  You tired to reinstall the Tv tuner driver? Check this box:

  [Tv tuner | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 170 & selProduct = 978 & STAS hortMod = 968 & language = 13 & selOS = 30 & selType = 218 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 218 & page = 1 & ID = 72412 & OSI D = 30 & driverLanguage = 42]

  It would be better if posted runs of your laptop model No.

• What is max capacity of the HDD on the Satellite M40-101

  What is the maximum capacity of the disc HARD can be installed in the laptop M40-101?

  To my knowledge, some of the Mobile Satellite M40 were shipped with the hard disks of 80 GB (IDE).
  I didn't find any official Toshiba information about supported tough max, but I guess you should be able to use the 100 GB drive HARD; Maybe a 120 GB HARD drive too.

  Seems that you have to test.

  Best regards