PSE9 on new iMac with Epson Pro3800. Need help.

Similar Questions

• How to properly install Adobe Creative Suite Design Standard (clouds pre-creative days) on the new imac with nothing other than the serial number

  I have cs6 Adobe Creative Suite Design Standard installed on my old macbook OLD pro (2007), and I need to also install this on my NEW imac (2015) as 2nd device. This product from adobe has been correctly registered in December 2012. I don't have the original installation CD (more there is no CD drive on these new devices in any case). I saw several download links, but I don't know which is correct (or if this is even the correct step). HOW to properly install my Adobe Creative Suite Design Standard on my new imac with nothing but my serial number? All I have is my online registration.

  (I'm even ready to uninstall the product on my older unit if it this will make easier, but as I get more than 1 my 1 license installation, I intend to proceed at the same time)

  Thank you!

  Just install it and activate it with your serial number (if it is compatible with your new operating system).

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• Cannot download the software for CLJ 4600 to the new iMac with OS 10.8.5

  I'm trying to set up my HP CLJ 4600 on my new iMac with OS 10.8.5. The printer is visible when I touched the sign in the menu printing & scanning as a close printer +. When the printer is selected, I briefly a message in which he tries to put in place, then the message "Unable to download the software from the server at this time."

  CLJ 4600 model number is C9660A.

  I'm connected wireless to the internet, and this connection works fine.

  The printer is connected to my iMac via the JetDirect ethernet cable into the printer.

  When it is plugged into my old iMac (10.4.11) via the same ethernet cable, the printer works perfectly.

  You have an idea why I receive the error message, and how can I overcome?

  Thanks for any help you can give!

  Hi Tommymommy,

  I understand that you are unable to download software for CLJ 4600 new iMac with OS 10.8.5.

  Here is a link that will help you.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?sp4ts.oid=74301&spf_p.tpst=psiContentDisplay&spf_p.prp_psiContentDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03413323-5%257CdocLocale%253Den_US&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  It gives you a step by step.

  Please do not hesitate to contact me if you have any other questions

  Thank you

• I've migrated CS4 on my new iMac with Yosemite. How to operate it please?

  I've migrated CS4 on my new iMac with Yosemite.  Can someone tell me please how to run again.

  Reinstall it correctly. Be warned, however. CS4 is not quite officially compatible with Yosemite and even if you get it to install, many things might not work.

  Download the CS4 products

  Mylenium

• How can I install Photoshop CS5 on a new iMac with no disk drive

  How can I install Photoshop CS5 on a new iMac with no disk drive?

  If you follow the 7 steps, you can dl a trial through one of the links on this page: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  and activate it with your serial number.

  If you have a problem with dl, you don't follow all 7 steps.  as a general rule, do not carefully follow the steps 1, 2 or 3 is the problem.

• How do I download/install Photoshop and first Elements 10 on new iMac with no disk drive?

  I have one of the new iMacs with no disk drive.  I migrated all the programs/files from old computer to new.  When I try to open Photoshop or Premiere - I get a message stating that the files are missing and reinstall.  How do I with no disk drive?

  I installed initially on the old computer with real disks.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  Photoshop/Premiere Elements 10:

  l http://prodesigntools.com/Photoshop-Elements-10-Direct-Download-Links-PSE-Premiere-pre.htm

• Failed installation: new iMac with Snow Leopard (2 LR)

  Hi, can anyone help?

  I got Lightroom 2 works without problem on a Mac Powerbook G4 for a few months. Now, I bought a new iMac, with the intention to move all my stuff of photography on him, but LR 2 refuses to install. It seems to be OK but stops before you ask me a serial number.

  I can't find anything in the forums or the knowledge base.

  Any help would be appreciated.

  Pete is right. The Setup program that comes on diskettes for installation with copies box of Lightroom will not work on Snow Leopard. Just download LR 2.5 Adobe. The "Download free trial" link on this page download a full version that you can just put your serial number of your box in.

• best way to put in place a new iMac with saved files?

  Hi all

  I'm new here so please forgive me if I've done something wrong. Just recently got a new iMac and wanted to get all my software work of music and other files installed. I used the Migration Assistant on the iMac to move files from a recent time Machine to the top of my Macbook Pro. After what seemed to be a successful migration, I noticed that Garageband, iMovie and a few other products Apple should be updated. My new iMac has been updated the newer versions until the migration wizard has been used. My questions are, it's best to go on a new set up, and never has that somehow restored my new machine settings to the previous settings of the Macbook Pro? Would it have changed anything wise speed or image and sound quality wise? of resolution, depth of bit or similar?

  Thanks in advance for any help or answers.

  Dave

  What is the best way to ride on a new together

  Yes.  Other resources - move your content to a new Mac - Apple Support and
  A new Mac set up an ancient, its backups or PC

  Software, Apple and 3rd party will need to be updated to work with your new OS System.  You can visit RoaringApps which will make easier verification.

  

• Why can't I install CS5 extended on new iMac with my serial number?

  All I wanted to do was take my CS5 extended serial number and install 5 PS on my new iMac (they have more disk drives). However, my serial number is 20 digits and it does not work? Sometimes shy of numbers. Can someone explain how this can be possible? I refuse to rent CS5 when I already have a lisc. Thank you.

  You need get the serial number of your Adobe account on the corporate web site, once there go in 'my products '.  You can get the number from there.

  Adobe applications show that you truncated intentionally serial numbers, with only 20 numbers that you have seen.  The full number is 24-digit long.  That's done on purpose, not to encourage software piracy.

• Impossible to get CS4 to work on the new iMac with the Mavericks

  I just bought a new iMac running the Mavericks and used Migration Assistant to migrate my old iMac. (I did twice!) Since then, I am unable to use CS4 on my new iMac. He asked my serial number that I type in but keep get a big red X next to it :-(

  I disabled CS4 from my old iMac, including the removal of the serial number.

  I downloaded and installed Java for OS x

  I followed solutions 1 and 2 on http://helpx.Adobe.com/x-productkb/global/error-licensing-stopped-Mac-OS.html

  Solution 1 resulted in nothing (there was no FlexNet folder in my library or anywhere else on my computer)

  Solution proposed 2 download the licenses Adobe, but the LicenseRecovery111.dmg file repair utility was not recognized, so does not open so it's not very useful!

  Solution 3 suggests repair disk permissions - as this is a new download of the Mavericks, I have not tried it yet

  Solution 4 suggests reset the permissions on the folder of FlexNet Publisher licensing service (Solution 1 suggested to delete it in the Library/Preferences folder and yet it is now apparently in the folder/Library/Application Support!)

  Solution 5 suggests reset permissions on the Adobe PCD folder - there isn't one on the new or the old iMac!

  Solution 6 proposes to delete the cache.db - journal in the Adobe PCD folder - see above

  Solution 7 suggest re-formatting the drive in a file system that is not case sensitive! Not really inclined to do

  Solution 8 - reinstall - new iMac doesn't have a DVD drive then how so I do? No doubt it will not solve the problem in Solution 7 anyway?

  Solution 9 - contact Adobe support - I did and spent some time on the chat with them that to say that I don't a not qualify for their help and to go to the forums

  I have searched the forums and tried various suggested corrections but no luck.

  Please can someone help before I have pull out all my hair

  Download the demo and activate it with your serial number:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

  Be sure to follow the instructions.

  You probably need to run UN-install it first to clean up the old files.

• Why are the 'minor' photos in the new iMac with K5 of the retina (using photoshop)?

  In English

  Hello.

  I met a 'problem' with the new iMac (retina 5K, 27 ", at the end of 2015).

  When I edit pictures in Photoshop, I can't get the images blown up big enough and the fillings of slide show they do not rule out even at a size of 72 dpi and with dimensions of 3000 x 2000.

  What don't I understand?

  Help would be so nice, thank you in advance.

  By Bjarne.

  PA Dansk

  Hej.

  JEG er pa stodt and 'problem' med den nyeste iMac (retina 5K, 27 ', ultimo 2015).

  NAR jeg redigerer billeder I Photoshop kan jeg ikke fa billederne blaest stort nok op og ved diasshow fylder ikke skaermen ud ved en str pa 72 dpi library pa med og selv 3000 x 2000.

  Hvad er det jeg ikke forstar?

  Tants city limit his BRA, pa forhand tak.

  By Bjarne.

  What version of the operating system and Photos do you use? Exactly how do you get pictures of Photos in Photoshop?

  LN

• Have new IMac with OSX El Capitan 10.11.1.Firefox crashes at startup, no response to the mouse.

  You just bought a new IMAC. It came with OSX El Capitan 10.11.1. I used Time Machine to restore all my data and information. All deferred fine, and all my software works very well. EXCEPT FIREFOX - Version 42.0. He hangs up with a white screen at startup. Sometimes it starts and Yahoo my home screen appears, but does not recognize my mouse and does not take into account my mouse click on everything. Sometimes (rarely) Firefox start. Unfortunately, if I get out, the next time I'm daydreaming, the same white screen, etc.
  I tried to restore Firefox as it is stated on their support site, but still have the same problem. Any suggestions?

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac = Options) key and then from Firefox. Is always the problem?

• New iMac with El Capitan gel

  I bought a new iMac 21.5 3 months ago, with an upgrade to 16 GB of RAM.  Within the first week, he started to run slowly and kept freezing.  It got worse as the weeks went by.  I got to my local Apple store where a diagnostic equipment is made, no defect found.  The Genius Bar offers a complete re-installation of software, which has been done.  The iMac continues occasionally to run slowly when on the Internet with Safari (it is better to use Firefox) and freeze until almost every day, the only way to make it work again is to turn it off and on again, by using the power button.  For the record - I have not downloaded any software Mac cleaning or similar, or any other software/applications that have been suggested elsewhere that can cause this problem.

  Has anyone else had this problem and found a solution?  After 20 years of using Mac, I'm about to take this iMac back for a full refund, after losing confidence in this particular product.  I have to say that all my previous iMac has worked flawlessly.

  I am convinced that el Capitan is the problem.

  Matchless350 wrote:

  The iMac continues occasionally to run slowly when on the Internet with Safari (it is better to use Firefox) and freeze until almost every day, the only way to make it work again is to turn it off and on again, by using the power button.

  1. Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  2 remove the test and com.apple.Safari.plist file.

  Empty the trash.

  Quit all applications.

  Hold down the option key and click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Preferences > com.apple.Safari.plist

  Right-click on it and select "place it in the trash.

  Close the Finder window.

  Turn it back on.    Restart Safari.

  If this does not help, "put back" the com.apple.Safari.plist

  Right click on the trash icon in the Dock, then select 'open '.

  Right-click on the com.apple.Safari.plist and select 'Put Back'.

• New iMac with freezing of El Capitan

  Three months ago, I bought an iMac with OS El Capitan new 21.5 with an upgrade to 16 GB of RAM.  In the weeks following the purchase, he looked for freeze with much activity Beachball.  The only way to get around this was to turn off the machine by pressing the power button and then turn it on again.  Two weeks ago I took in my local Apple store for an appointment at the Genius Bar.  After a diagnostic test there is nothing wrong with the hardware.  They decided that it was a software problem and performed a reinstallation of the software.  Two weeks later my iMac is still freezing almost every day, just like before.

  A couple of searches of the Internet shows that I am is not the only one having this problem, forums and magazines are full of identical complaints of using El Capitan Mac owners, however, the staff in my local Apple store will not admit there is a problem?  Anyone else here have this problem?  Is there a solution to this problem?

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

  If you have installed an antivirus or any application on the cleaning system which is probably the case. If you have, and then follow instructions to uninstall their application developers! Restart the computer in Mode safe to clear some of the caches by holding down the SHIFT key when the computer reboots, until the computer reboots completely. Then restart normally and test it.

  Most of the problems are user induced, so I'm looking forward to your report to EtreCheck. In addition remember that Forums are like hospitals. If you wanted to learn the general health of a city would make you its hospitals? Of course, no, they are full of sick people.

• HP 15-f209wm with Intel Celero: need help with a unusual amenities. Install windows 7 on a new computer windows 10.

  Hello
  
  I am really puzzled here and need help you guys!
  
  A friend of mine, who is not computer savy is used to windows 7 and would like to 'return' in Windows 7 to a windows 10.
  She recently bought a new computer:
  Black HP 15.6 "15-f209wm with Intel Celeron N2840 4 GB memory 500 GB (windows 10)

  And had me working on it to install it as a Windows 7.
  The problem that I didn't forsee is that after I installed wiondows 7 Nothing worked because all the installed drivers were too 'new' for the Windows 7 operating system at least that is what I think the problem is.

  The main thing that doesn't work is the USB ports and Wifi,
  and I cannot find drivers to make this 'connection', this 'bridge' of sorts between Windows 7 operating system and the hardware inside the computer.  And I can't find solutions on the net!

  An idea that I'm trying is to copy and paste drivers from another computer Windows 7 HP, on it. But I don't know if that's going to walk.

  I am really confused with this and need your expertise!
  
  We thank you in advance.

  * Note *.
  This computer has not been upgraded from a previous version of Windows.
  I tried the Driver Booster to see if it would be the auto scan, detect and install fix it but it didn't.
  I got the Lan/Ethernet is finally working.

  Hello:

  This driver installs usb, not the chipset driver controllers... (the last driver that I posted on my first answer).

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/25687/us B-3-0-Intel-USB-3-0-Driver-for-Intel-NUC6i-x-SY

  According to the specifications of product for your laptop, the USB driver above must have worked.

  If the usb driver 3 above fails to install the usb controller...

  Please view the the hardware ID for the USB controller requiring driver.

  To find the hardware ID, go the Device Manager and click on the usb controller requiring driver.

  Then click on the Details tab in the upper part of the window of the USB controller.

  Now you will see a drop-down list of property, and it will be set to the Description of the unit.

  On this list and select the 2nd (Hardware ID).

  After the first string of characters you see in the window.