portable antenna installation

Similar Questions

• Windows Media Center 7 won't accept digital antenna installation.

  Media Center will not allow the selection of digital for the installation of TV antenna now that I've upgraded to Windows 7. I tried both automatic and manual setting but it detects only an analog antenna that is incorrect. I'm in the United Kingdom and you want to use the DVB - T signals. How to solve this? Thank you

  Since it on a 3-year card, you are sure that ASUS has developed support driver for Vista or Windows 7?

• Office Jet 100 portable printer: HP Officejet 100 portable printer installation problem

  While it is installed via Bluetooth or USB I keep having issues get past requirements.  A notification appears, and says the only computer lacks the necessary USB software support. Installation of software on Lenovo Thinkpad Ultrabook. Model T460s thank you in advance for any help.

  Hello

  If you use the original CD, don't forget to download and run the latest software first installation:

  http://ftp.HP.com/pub/softlib/software12/COL36711/bi-90383-4/OJ100ML411_Full_14_en.exe

  Then, follow these steps to install the software you:
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• Dynadock V10 - "error cannot find Setup file" INSTALLER ERROR

  Hi I have a toshiba dynadock V10.

  Whenever I try to install the drivers, that it says "error cannot find Setup file. I have downloaded the latest drivers and off my anti virus and cut all the proiceses running and no go. There are a few references to this on the internet, but none has a solution.

  I amn trying to install it on an equium U400 running windows 7.

  Curiously, it loaded on an old dell pc easily!

  I spent hours looking on the net and there is no answer. I have nothing showing in the programs to uninstall.

  Thank you

  > Oddly enough it loaded on an old pc easily!
  Hello

  This means that drivers are ok and that there must be something wrong with the system pre-installed on Equium U400.
  How to proceed?

  It is important that you don't would NOT connect the Dynadock to the laptop before installing the software and drivers was not finished.
  Therefore, you need to install the software first. Then after new reboot connect the Dynadock to portable and installation would end the next steps.

• Why the firefox profile is messed up and does not restore the tabs when you replace the Windows shell with something like bbLean

  I use Windows 8.1 x 64 but I can replace the Explorer bblean shell and when I do that firefox has issues with the profile such that cancel last closed tab or not to restore the tabs at startup.
  I was able to use the replacement of shell of bblean for years in previous versions of Windows, but he always had a weird behavior with firefox. Of course, I am currently in contact with bbLean developers working on the problem, but I would also like to hear what may be the cause of this.
  Thank you in advance.

  @guigs2
  Thanks for responding but I solved it somehow.
  'Replace the shell' means that I have deliberately change value in HKCU NT\CurrentVersion\Winlogon\Shell so it does not point explorer.exe but blackbox.exe.
  After the reset of my installation of windows and get rid of all programs, including firefox now I use firefox portable (not installation of vanilla from the original site) and found, I have no problem with profiles so far.

• Problems with Firefox 16, no homepage illustrated when starting firefox, bookmarks not shown, slow loading, missing address, without returning during navigation

  I installed firefox on my laptop 16, before that I had version 15 and everything was fine. After insalling the update, some problems came.
  first of all, there is no home page illustrated when I run firefox, although I took in the options

  Second, my bookmarks bar does not appear, I have to disable and enable the toolbar bookmark my wishlist, which is due to every time I close firefox and open it again

  Thirdly, it seems to me that pages load more slowly, each new page needed a few seconds to appear, using 15 version page loading was much faster

  Fourth, it never appears the address of the Web page I'll, he always just says "go to a Web site" is much more difficult to find the address of the site

  Fifthly, when I move from one page to another, I cannot go back but look for the site, for example when I have something to search on google and choose a page to look at, to return to my search results, I have to search again

  I hope that there are solutions for my problems

  Rather than suggest that you reset with 16 of Firefox that wasn't perhaps you could try portable Firefox and use Firefox 16 in this way. Check if it works ok for you. (Portable Firefox installs easily as an additional browser without making a mess of all the other Firefox settings or bookmarks).

  • http://PortableApps.com/apps/Internet/firefox_portable

  I could provide you with an address to download firefox 15 but is probably not better than temporarily using 3.6 Firfeox

  • See install an older version of Firefox (which provides links, he also mentions the ResetFirefox, but I personally would avoid using the reset Firefox feature, unless you have no extensions and no procedure of customization/customizations)

  If Firefox portable 16 work maybe we might consider then get a standard installation of 16 Firefox works fine.

• Satellite L730-A191 - random stop

  I have laptop Satellite L730 - A191 (PSK0CV) that have a stop at random, in safe mode it seems ok, but when it starts in normal mode I experience the problem. When installing the OS is running it will restart all of a sudden that's why no operating system installed. I already removed the battery, restored bios defaults to 1.8 version but still problem exist.

  More can I be from material aside as chipset VGA?

  Thanks in advance

  I guess that there is a hardware problem because stop all behavior common portable system installation isn t.

  Usually the unit would be closed due to a higher internal temperature but its weird that this happens during the installation of the system. Usually, this would happen when running some applications of high performance (IE game).

  I think it might be a hardware related problem, but it's just a personal opinion.

• replacing my wireless network card (upgrade)

  Hi all

  I have the Pavilion dv6-1210ew. I need to replace my wireless card, and I want to buy the new work on standard and 5 GHz N. Now I have broadcom b/g. is it possible to install this map on my computer? Some people told me that it is impossible. If it will be possible could you suggest me some type/model card?

  Thank you

  Kacper

  It is indeed possible. The following image, there are four modules wireless who BIOS support and that are compatible with your laptop. The best candidate update for your laptop would be the Broadcom 4322 module WLAN 802.11 a/b/g/n.

  Source reference: Pavilion dv6 Entertainment PC maintenance and service guide

  Since your computer laptop is currently a B installed wireless module, you may also use a wireless module that corresponds to a configuration single antenna, unless your goal is to upgrade the wireless antenna as well. Do some research on the module that you are considering buying to make sure it will match this antenna installation in your laptop. There is also information on the laptop (some laptops) configurations in the interview guide & Service.

  The modules can be purchased from HP or a supplier online. Use a Google search for comparison shopping.

  

• Center media card PCI TV Tuning problems

  Since the digital switchover I can no longer use Windows XP Media Center to watch TV. My TV PCI card is a device Hauppauge Nova - T 909 dual channel TNT but who has already worked with library and is currently working with the Hauppauge software, used to the library to find all channels when scanning for them. Also, I get an error message saying the tuner cannot be found or the antenna is not connected, which is clearly.

  I deleted, canceled and rebooted Hauppauge drivers etc and no indication in device, malfunction management. Windows is also updated

  Any help would be appreciated

  The digital switchover has caused far more problems than most of the people living in big cities and realize populated areas. The switch was made for these main reasons:

  To free up airways for the fast growing demand for cell phones.

  Digital is also much less space than analog.

  Digital reception is more clear.

  The Government owns the Airways and can now sell free space and make billions.

  I'm also affected my cell internet connection (which I am on now) decreased by greately and my cell phone. It's because I live on a mountain in an uninhabited area and my cellular company is not interested to spend millions to build a tower in my neighborhood and the digital switchover affected my reception. High demand reduced reception quality.

  However, it is temporarily more side, I have a TV Tuner analog and I still get the signal. Reason in low population areas were not required to pass even if some switched in any case this is why "temporary".

  All major cities have been required to spend as well as highly populated areas.

  All that being said:

  I'll assume that your device is both digital + analog and you installed a driver for the two. Try to uninstall the driver only analog or only digital driver (depending on where you live).

  You can also try uninstalling the software Media Center capable of most of the options.

  You said antenna: if she is drinking, it is most likely your problem. If you were in analog and digital now a portable antenna or an antenna outside normal is able to receive the siginal for a distance of about 10 miles only. Try first at this stage. Get a better antenna but attention, more regular external antennas announced for you give incredible reception are a fraud. Before buy you a try on a different surface even though it's a pain to lug your PC it unless you have a laptop.

  One last note on digital and analog when you use an antenna.

  If the reception is poor with analog you get snow or lines, but you still have a picture no matter how it is!

  If the reception is poor with digital, you have no image at all your TV becomes black or you receive a message from your computer saying the tuner cannot be found or the antenna is not connected.

  (Some people also have a temporary loss of signal due to maintenance on the towers)

• HP ENVY 15 Notebook PC: HP Envy 15 with SATA USB adapter 512th Advanced Format HARD drive

  Hello:

  I want to clone the HARD drive in my system via a USB to SATA Adapter for an identical external HARD drive - this record could then be used to get back in the quick business failure of internal drive. Internal and external drives are the types of advanced Format.  The drive is: HGST HTS541010A9E680. I see the 4 areas of native k when the disk is connecetd via a USB adapter?  So far, my older USB/SATA Adapter shows the areas 4096 bytes, not he emulated disk 512 byte sectors.

  Thank you

  Hi @teranz

  Thanks for the reply.

  Unfortunately the adapters can be hit or miss, not always reliable. You could talk to the manufacturer of the adapter for advice.

  Regarding booting from a USB key, it looks like you want to install the OS on a USB device. It is possible with some advanced configuration, but it is out of the reach of these forums. You may find help by searching for «portable Windows installation»

  Good luck

• MediaSmart TV Freeze

  When the full screen to the skin of the Index of the string, all that I get is a totally black screen with the TV window. I never had this problem before. I have always used the small portable antenna and now that it doesn't work anymore, I went to pigtail coaxe equipped with an amplified TV disc rabbit ears antenna.

  Now, my Media Smart TV is upward. I close it, reopen it, restart the computer and still the same.

  Also, sometimes when the signal comes in and out, a problem with the small portable antenna, the TV scene would freeze. I had to stop the Smart Media and reopen to get off it.

  Not a 'Refresh' button can be provided to clear the stuck image?  How hard would it be?

  Another problem erupted with my Media Smart TV.  Now, none of the EPG signals does not match with the number of TV. Some stations are stuck with more of the TV station.  Restart the Media Smart or the computer does not change this. What is happening with the software?  The amplified rabbit ears affect the signal of the EPG?

  My Smart Media software is now entirely inconsistent for some reason any. Is there a place to download the software again? Y at - it a cache that needs to be eliminated? How is it repairable?

• Windows 7 media center tv guide, update no past 18/03/16 @ 9 pm CDT

  I have 3 windows 7 media center computers - all guides have ceased to update more later.  One is OTA antenna Installation Guide and two Cable Company Guide Setups.  The latest Guide entry on all 3 systems is on 18 March at 18:00 CDT.  I tried to manually request updates to guide without result.  The update of the guide indicates success - but no other entries are downloaded.  I tried to restart the computers. I have completely updated Windows 7 for all the updates that are known except KB3035583.  Nothing seems to make a difference. Still no update guide beyond 3/18. / 16.

  Everyone sees the same date limit?

  Help?

  I got the email from my contact at MSFT that this should be corrected
  today ' today/tomorrow.
   
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows experience
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• The 1310 AP configuration and IOS

  I have two 1310's

  the info for A is:

  Product/model number:	AIR-BR1310G-A-K9-r
  Software system Filename:	C1310-k9w7 - tar.124 - 3 g .JA1
  System software version:	12.4(3G) JA1
  The boot loader version:	JA4 12.3 (2)

  the infor for B is:

  Product/model number:	AIR-BR1310G-A-K9
  Software system Filename:	C1310-k9w7 - tar.124 - 3 g .JA1
  System software version:	12.4(3G) JA1
  The boot loader version:	JA4 12.3 (2)

  I'm trying to create a bridge root bridge of relationship and I'm out of luck.

  they are on my desk in front of them, I tried different cisco configs and radio, keep going down.

  I tried express setup (where it requires an SSID) and a manual configuration (where the SSID is not required since I DO NOT NEED to a SSID for a simple communication from gateway to gateway).

  ex: http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml

  These two will link two buildings and each will have a switch on the other end.

  simple enough no VLAN etc.

  I begin to suspect the IOS versions that I can't find these versions of IOS in all documentation I looked for examples of configuration.

  This AP is very popular for use in severe environments as an AP not a bridge also to some bridges, you can use an omni antenna if the 1310 is the root for a mutiple no roots or the builtin antenna may not meet remotely you need and you can use a Yagi or dish for the link.

  If you use a single antenna, you will have to change it in the config you use right/primary only antenna. If you do not do this, try using the left/secondary antenna AP and the connection will fail because of the lack of an antenna, your other choice is to put an antenna on both connectors and not worry.

  There isn't that one radio, based on the communication software will pass the exit to the righht or left antenna if diversity is enabled

  the builtin antenna is vertically polarized so you shoud in stall the Yagi with vertical polarzation is polarization normal if you follow the antenna installation instructions. There is normally an arrow and the word to indicate the orientation of the antenna.

  Each AP may be at the root, don't forget to ecre evidence all coaxial connections.

  Yes, you learned that the tree covering weight works.

  Good luck

  Bill

• 6205 to 6300 x 230 wireless upgrade

  Hey can I put my card advanced-n wireless 6205 to use a 6300 ultima card?

  I have the 2 antenna x 2 on screen

  map of 6300 needs 3 x 3 antenna installation, it will work with 2 x 2 antennas, but it will just play same ball in the Park as the 6205, as the upgrade, you're planning would be a waste of money (so to speak).

• No one knows how long after you have uninstalled LR of an office can it be reinstalled in a new computer?

  I change platforms and Windows on Mac... new desktop PC and portable computers; Installation of office kept LR fault... I forgot the limit on the number of authorized computers. So I uninstalled LR in the old office and tried, same results. Three times! Not to mention that the number of computers, is there another problem I don't know everything?

  I download a new copy of 2.4 and try that. (You install from a disk? What version?). Version 1.x will not anygood at all, and I'd be inclined to delete the new machine.