PTR DNS records Server 2008 R2

Similar Questions

• DNS Server 2008 issue

  My Windows Server 2008 VMs does not automatically create the DNS records, but will update them if I manually create them. Here's the break down. I have several servers in my area, virtual and physical with static IP addresses. Records from 2003 and 2008 server create and update DNS physical server running as they should. I have several Virtual Server 2003 computers that also work well with the DNS system. The only problem I have is with Server 2008 running on a virtual machine. What I have done for all virtual machines 2008 is manually create DNS record and change the permissions so that he has edit rights to the record. Does anyone have any ideas of what can be the problem?

  Hi FlingDog,

  Welcome to the forums!

  I doubted much you have a specific question from VMware here. It seems that your DNS permissions are not quite right.

  If you you remove the manual entries in DNS, re-seems-t-it if manually save you it from the server performed? Try to run the following in a command prompt: ipconfig/registerdns

  As indicated at the end of the command, the DNS records must be updated, and if not the best place to look is the event viewer on your DNS and your server after 15 minutes.

  Post back if you still have problems.

  See you soon,.

• I use a server DNS Server 2008 and need to transmit the DNS lookup on a Linux server that only allows you to Port 3128 for DNS.

  Hello

  I use a server DNS Server 2008 and need to transmit the DNS lookup on a Linux server that only allows you to Port 3128 for DNS.

  How can I configure my DNS server to use this port for shipments?

  Thanks for your replies

  Marcus

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverNIS/threads
   
  Here are a few Server DNS forwarders. Links for refrence,
   
  http://TechNet.Microsoft.com/en-us/library/cc754941.aspx
   
  http://TechNet.Microsoft.com/en-us/library/cc731991.aspx
   
  I hope this helps.

• Assign host names to deployed VM based on the assigned IP address DNS record

  Hello

  I'm trying to set up Lab Manager in a lab environment. The laboratory uses static IP, so I set up static IP pools that will assign an IP address to a deployed virtual computer. However, Lab Manager requires that you provide the hostname before you deploy (the default is ConfigXXVMY, XX and there is a number (ex.) Config30VM0). We already have DNS records to our IP addresses, and we need the hostname to match with the IP address.

  For example, the IP 192.168.1.5 has a labpc5.ourlab.company.com DNS record, and the host name should be labpc5.

  When I deploy a model, Sysprep runs and it will change all network information, but it changes the hostname of this ConfigXXVMY, not the host name that resolves the IP address is assigned. I need to know how to fix this, or if there is a kind of way to make that change to pre or post sysprep.

  Note: I tested this especially with Windows Server 2003 and 2008 - I intend to eventually include Linux OS and this issue also apply here.

  If someone has an entry that could help me solve this problem, I would really appreciate it.

  Thank you.

  Yes, if the network works immediately after sysprep and before you reboot... then just write a post customization.

  Pre and post customization are command line arguments.

  i.e.

  PREandPOSTscript.bat postcustomization

  There, you'll need something like this:

  off @echo

  If "% 1" == "precustomization")

  tasks precustomization echo

  ) ElseIf '%1% ' == 'postcustomization')

  tasks postcustomization echo

  ) (other)

  unknown command line Echo

  )

  The syntax is another post here: http://communities.vmware.com/thread/167069

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Citadel of backup does not not on Server 2008

  I use Lookout 6.7

  I just updated from Windows XP to Windows Server 2008 R2 Standard.

  The process went very well. I was able to take the files of the project and the new easy to machine. I was able to archive the data from the old computer to the new easily.

  I use the CitadelControl object to back up data.  It works fine on the old computer. The new works at all.  The bar works but no progress data is recorded or stored in the backup file.

  I checked the path on the new machine, and that's okay.

  I have attached the database correctly.  I test this by creating the new path on the old machine and checking my steps.

  Anyone with ideas?

  The only thing that I wonder about is that measurement and automation is installed on C: and 6.7 Lookout is installed on E:

  I think it's important but...

  I uninstalled the software service COMPUTERS had installed and reinstalled to the default locations.

  Lookout and measurement and control are now in the same drive.  Restarted server a couple of times and unit would still not have archive.  Went back next day unit is now archiving and working. A week later to check that everything works.

  Maybe the gremlins.   anyway for now fixed.

• Server 2008 r2 Regestry key merge to a wrong setting

  I am rebuilding a Server 2008 r2 Enterprise full installation. I have a new and unusual problem merging registry keys from my old server running 2008 r2 Enterprise full installation as well. When I merge the keys he come back successful, but the services aren't there and the keys are not in the folder 'Current Control Set. They are in the control record Set 2? What is happening and how to fix this. I tried to use the sc command line to create the keys with similar results. I am logged in as the system of administration and have the permissions for the registry folder that I want them to go.

  Help please.

  Thank you

  Mike

  The issue is addressed in this consumer-driven community.  You should ask your question on the Microsoft TechNet forum.

• Server 2008 R2 gel - event ID 7036

  Hello dear community,

  I have a problem on my Server 2008 R2 S - it's just freeze for a few seconds (about 30) and working again.

  The event log indicates the ID 7036 - there is no DNS - this is a standalone Server. And on every 20 min is start and stop the DNS Client. This service is in trouble?

  Are there other known problems with the same problem? (Gel, for a few seconds)

  Best regards

  Sebastian

  

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• BSOD once a week PAGE_FAULT_IN_NONPAGED_AREA Server 2008

  Can someone help me with this? I have an Acer EEE PC running Windows Server 2008 R2 and around once a week, I get something like this (see below).

  PC made that act as an FTP server and a Remote Desktop server to which I log on remotely. I ran the update of windows a few weeks ago, but no change. Please it makes me crazy that the machine is in a remote and difficult to access.

  Thanks much for any help!

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: hal.dll

  PAGE_FAULT_IN_NONPAGED_AREA

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0 X 00000050 (0XBBEC0000, 0X00000000, 0X00000001, 0X8186BCF3)

  HAL.dll - address 0x81bd950c base at 0x81bd2000 0x47918a38

  

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.
  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
  If you are overclocking stop.  (chances are if you are unsure if you are, you are not) a
  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".  We need at least 2 FILES DMP to diagnose and confirm
  The procedure:
  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone". (if available on your site, MS has this)
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
  Link to find out how to download below.
  http://www.WikiHow.com/use-SkyDrive
  To ensure the minidumps are enabled:
  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.
  Please also run MSinfo32 and download the output as well.
  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  System specs are extremely useful then please include everything you know.
  
  
  Blue screen view and that crashed are often wrong and should only be used in case of emergency
  Team Zigzag3143.com  

• Errors in user profile on the server terminal server 2008 R2

  I have a problem on a Windows Server 2008 R2 SP1 running Terminal Server services with roaming profiles. The server works as a terminal server server for some time without any problems, but a few weeks ago he began logging on users with temporary profiles or refusal to sign indicating "the user profile Service has no logon. User profile cannot be loaded. "Once rebooted the server seems to act normally, but when 8-10 users have experienced successful logons, the above behavior reappears. At the end of the day, when the activity of the user falls, he can still connect new users - it seems that it is not related to the content of the files of the user's profile. When I check the event logs, the user profile service seems to work, successfully copying profiles on local profile paths. The Windows Modules Installer service cannot be started, error 1450 insufficient system resources. SFC and Windows Update don't work either, probably related to the error of the Windows Modules Installer. In addition, a mistake DCOM ("the server is not registered... ") is recorded in the log of events after each reboot, by referring to the"component base maintenance Session. My impression is that this problem is related to a kind of inadequate resources (non-material resources, the server is well equipped for the current level of activity), so I was running after the registry size, memory management, memory paged and nonpaged pool size, etc, but without any significant success. I realize that it is a somewhat soft and open query and I'll be happy to provide all necessary information - I spent a bit of time on this problem, and any suggestion or comment is welcome.

  This kind of question is really beyond volunteers in this forum, which
  deal with Windows users with security issues.  You must go to
  TechNet and browse the forums to see if there is a good place for this post,.
  TechNet is where the gurus of Pro and server IT hang out.

• Unable to validate a way out of trust on either of the two domains using Windows Server 2008 R2

  I have two domain controllers in the two different forests.  Both have a Stub dns setup for each other and can ping both the field and the name of dc for eachother.  Domain1 build outgoing approval and validate successfully.  Domain2 see confidence applied, however any attempt to validate this trust or build from the Wizard ends with only 2 domain cannot locate the domain controller for Domain1.  What can be done to allow Domain2 validate this trust?

  Hello

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• PAGE_FAULT_IN_NONPAGED_AREA (50) - Windows Server 2008

  Hi Microsoft supports the team.

  We have Windows server 2008 sp2 enterprise edition-32 bit, once a week, we started receive "PAGE_FAULT_IN_NONPAGED_AREA" error message on this subject. What error come server stops responding and blue screen came up with the error message above, after that, you need to restart the server to begin to work in!

  Please find below the log from the dump file:
  --------------------------------------------------------------------------------------------------------------------------------------------------

  Loading dump file [C:\Windows\Minidump\Mini080312-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: D:\241 RND\Symbols\Extracted
  Executable search path is:
  Could not load the ntoskrnl.exe, 0n2 error Win32 image
  WARNING: Unable to verify timestamp for ntoskrnl.exe
  ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (8 procs) free x 86 compatible
  Product: LanManNt, suite: TerminalServer company
  Computer name:
  Kernel base = 0x82a18000 PsLoadedModuleList = 0x82b2fc70
  The debugging session: 23:11:57.714 on Thursday, August 2, 2012 (UTC + 01:00)
  System Uptime: 9 days 15:17:21.963
  Could not load the ntoskrnl.exe, 0n2 error Win32 image
  WARNING: Unable to verify timestamp for ntoskrnl.exe
  ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ............
  Loading user symbols
  Loading unloaded module list
  ..........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 10000050, {f2a45048, 0, b 82, 94299, 0}

  The kernel symbols are FALSE. Correct symbols to do the analysis.

  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Either you have specified an absolute symbol, or your debugger *.
  has no information complete symbol.  Absolute symbol *.
  resolution is disabled by default. Please specify a *.
  complete symbol module! NomSymbole, or activate the resolution *.
  symbols unskilled by typing '.symopt 100 '. Note that *.
  allowing unqualified symbol with the network symbol resolution *.
  shares of server in the symbol path can cause the debugger to *.
  appear to hang for long periods of time when an incorrect *.
  symbol name is typed or the symbol of the network server is down.     ***
  ***                                                                   ***
  For some commands work properly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************

  ADDITIONAL_DEBUG_TEXT:
  You can run '.symfix; .reload' to try to fix the symbols path and of loading symbol.

  MODULE_NAME: nt

  FAULTING_MODULE: 82a 18000 nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 4f79a9be

  READ_ADDRESS: could not get nt! MmSpecialPoolStart
  Unable to get nt! MmSpecialPoolEnd
  Unable to get nt! MmPagedPoolEnd
  Unable to get nt! MmNonPagedPoolStart
  Unable to get nt! MmSizeOfNonPagedPoolInBytes
  f2a45048

  FAULTING_IP:
  NT + c 17 299
  82b 94299 394724 cmp dword ptr [edi + 24 h], eax

  MM_INTERNAL_CODE: 0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT_SERVER

  BUGCHECK_STR: 0 X 50

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from 82b9a7f4 to b 82, 94299

  STACK_TEXT:
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  90e72a8c 82b9a7f4 01000001 4020 009c3f70 nt 009c + 0x17c299
  90e72abc 82b9ae22 c422da20 00000006 01000001 nt + 0x1827f4
  82b 95848 01000001 90e72c60 8000e8d0 nt 90e72b04 + 0x182e22
  90e72b60 82b97fb7 90e72bb4 00000000 00000005 nt + 0x17d848
  90e72bd8 82b9a257 90e72c60 90e72c4c 00000000 nt + 0x17ffb7
  90e72c18 82b9049f 90e72c60 90e72c7b 00000000 nt + 0 x 182257
  90e72d14 82b906d4 82b105a0 00000002 00000002 nt + 0x17849f
  90e72d38 82c6fb01 82b1a13c 8784e020 82abdda2 nt + 0x1786d4
  90e72d7c 82bedfe2 9b1e85b2 00000000 00000000 nt + 0x257b01
  90e72dc0 82a56f0e 82abdca5 00000000 00000001 nt + 0x1d5fe2
  00000000 00000000 00000000 00000000 00000000 nt + 0x3ef0e

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT + c 17 299
  82b 94299 394724 cmp dword ptr [edi + 24 h], eax

  SYMBOL_STACK_INDEX: 0

  SYMBOL_NAME: nt + 17 c 299

  FOLLOWUP_NAME: MachineOwner

  Nom_image: ntoskrnl.exe

  BUCKET_ID: WRONG_SYMBOLS

  Follow-up: MachineOwner
  ---------

  --------------------------------------------------------------------------------------------------------------------

  Can you please review and guide us more as soon as POSSIBLE.

  Let me know if any other information required for the same thing.

  Kind regards

  Helen Shah

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx

  Hope this information is useful.

• How can I work from my deskstop PCs, directly in a foledr shared under win server 2008 so that all my work is saved directly on the server.

  How can I work from my deskstop PCs, directly in a foledr shared under win server 2008 so that all my work is saved directly on the server.

  what I try to do is the following.

  I installed winserver 2008 on a machine and I created a folder for the individual. I want the individaul to connect in the folder ocreated on winserver 2008 directly from their desktop and laptop computers and their work so that all works are recorded directly on the server.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How can I configure a static IP address in Windows Server 2008?

  original title: set static IP of Server 2008

  I have a Server 2008 R2 from a CD of demo loaded on a Dell computer.
  When I start my Poweredge 1950 server, I get these messages:
  ' F/W initialization devices 0% '.
  info on the RAID drivers
  "(HA-0 9Bus 2 Dev 14) PERC 5 / i integrated 5.0.1 - 0030"
  "The battery material is missing...". »
  "Source 1 or logical drives on the adapter to the host.
  Logic of 1 drive (s) handled by BIOS
  some information about the remote access configuration utility
  and then he told me that the IP subnet, gateway, are all 0.0.0.0

  I have to hit F1 to continue the boot or F2 to run the Setup utility.

  In the configuration under embedded devices utility, two network cards have TOE activated ability
  I don't seem to be able to assign the NETWORK adapter a static address, and he poses problem when I try to put in place AD DS services
  Server 2003, I read that the TOE function on the NETWORK card is loaded.  I can't disable in the BIOS screen.  I see solutions for
  This manipulation for Server 2003, but nothing for 2008.

  When I try to use installation of AD DS services in advanced mode and get to the screen to select additional options for this domain controller, and I check the DNS of the server, a warning is displayed saying that one or more physical network adapters don't have a static IP address.

  Any suggestions on how to set the static NIC card?

  Thank you

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows Server 2008 R2 Standard 32-bit blue screen Crash

  Hello

  Our company used a Windows Server 2008 Standard 32-bit R2 as a database server and the Web server at the end of 2009. It was working fine until recently. In the last 6 months, we do experience error blue screen and system crash. It happens at random may be once or twice a day or it just doesn't happen at all for 2 or 3 weeks.
  The last blue screen was on 14 September at about 7:30, I take the Memory.Dmp with Windbg and here is the content file:
  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.
  Loading dump file [C:\Windows\MEMORY. DMP]
  The core dump file summary: the single kernel address space is available
  Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols;srv * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (2 processors) free x 86 compatible
  Product: Server, suite: TerminalServer
  By: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
  Computer name:
  Kernel base = 0x81a1d000 PsLoadedModuleList = 0x81b34c70
  The debugging session: Wed Sept 14 07:32:17.377 2011 (UTC - 04:00)
  System Uptime: 0 days 10:37:36.088
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ........
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  Use! analyze - v to obtain detailed debugging information.
  BugCheck D1, {10, 5, 0, 8bf70422}
  ERROR: Module load completed but symbols can be loaded for aarahci.sys
  ERROR: Module load completed but symbols can be loaded for intelppm.sys
  Probably caused by: aarahci.sys (aarahci + 3d 422)
  Follow-up: MachineOwner
  ---------
  0: kd >
  ! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 00000010, referenced memory
  Arg2: 00000005, IRQL
  Arg3: 00000000, value 0 = read operation, 1 = write operation
  Arg4: 8bf70422, address memory
  Debugging information:
  ------------------
  READ_ADDRESS: 00000010
  CURRENT_IRQL: 5
  FAULTING_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0XD1
  Nom_processus: System
  TRAP_FRAME: 81b12b10-(.trap 0xffffffff81b12b10)
  ErrCode = 00000000
  EAX = 00000000 ebx = 8e209038 ecx = 00000007 edx = 00000080 esi = 8e203bdc edi = 79000010
  EIP = 8bf70422 esp = 81b12b84 ebp = 81b12bc0 iopl = 0 nv up ei pl zr pe nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010246
  aarahci + 0x3d422:
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h] ds:0023:00000010 is?
  Reset the default scope
  LAST_CONTROL_TRANSFER: from 8bf70422 to 81a6afd9
  STACK_TEXT:
  81b12b10 8bf70422 badb0d00 84c67c38 00000080 nt! KiTrap0E + 0x2e1
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  81b12bc0 8bf70899 8e209038 84a2a458 84a2a360 aarahci + 0x3d422
  81b12bdc 8bf70c96 8e203bdc 00000002 00000006 aarahci + 0x3d899
  81b12bf0 8bf673b2 8e203bdc 81b12c14 8bf3b32e aarahci + 0x3dc96
  81b12bfc 8bf3b32e 8e203bdc 84a11a30 84a11ae8 aarahci + 0x343b2
  81b12c14 8bf37d81 00a2a08c 81b12c38 8bf860b4 aarahci + 0x832e
  81b12c20 8bf860b4 84a2a004 849dd784 849dd780 aarahci + 0x4d81
  81b12c38 81 has 63970 849dd780 84a11a30 81ddaf6b SCSIPORT! ScsiPortInterrupt + 0x2a
  81b12c64 81a638e9 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch2ndLvl + 0 x 44
  81b12c64 8c3d1406 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch + 0 x 29
  81b12cf8 81acdcd4 84c59cb8 85278ac0 00000000 intelppm + 0 x 1406
  81b12d50 0000000e 81ac5861 00000000 00000000 nt! PoIdle + 0x2d1
  0000000e 81b12d54 00000000 00000000 00000000 nt
  ! KiIdleLoop + 0xd
  STACK_COMMAND: kb
  FOLLOWUP_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: aarahci + 3d 422
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: aarahci
  Nom_image: aarahci.sys
  DEBUG_FLR_IMAGE_TIMESTAMP: 48920ae4
  FAILURE_BUCKET_ID: 0xD1_aarahci + 3d 422
  BUCKET_ID: 0xD1_aarahci + 3d 422
  Follow-up: MachineOwner
  ---------
  -----------------------------------------------------------
  I check the server system property and I see that we use ADAPTEC Serial ATA RAID host as storage next to Microsoft iCSCI and ADAPTEC RAID SCSI Disk Device 500 GB HD controller initiator.
  I also see that ADAPTEC Serial ATA RAID host uses aarahci.sys as a pilot, I check the driver, it's the most recent driver.
  My question is the same as I understand that there is something wrong with the driver, but I don't know what really happened. Maybe the driver is not good, the disc has fault or we do not have enough memory (our server has only 4 GB of RAM and memory load is still > 80%, sometimes it reached 96% and current Page File is 4265 MB)
  Can someone help me to point out what exactly happens with the error above?
   
  That means CURRENT_IRQL: 5?
  and what it means: DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Thanks a lot for your help.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows Server 2008 fax and scanning... .cannot connect fax modem

  Hello

  I am running Windows Server 2008 R2. Recently, apparently after you install some automatic updates when the server unexpectedly shut down several weird errors are produced on the machine. First to be noticed was that faxes were more to be received. While they inspected more, the fax service had stopped working and could not be restarted, such as the Windows event log. After searching for some time, a solution was found here: http://social.msdn.microsoft.com/forums/en-US/windowscompatibility/thread/c75ae899-d05b-411d-a7f2-00fdd33b8589/

  Fix Subinacl.exe described in the post didn't work, but deleting a corrupted windows journal file did, and the diary of events and fax services would begin again.

  I thought that my problem was resolved, but the fax service is still broken.

  Trying to set up the server to receive faxes with Windows Fax and Scan, once more, as he had done very well before, I came across another error. What the first implementation account fax by following the Wizard launched by selecting "new fax" for the first time, or through the tools-> accounts-> options for adding fax, the mistakes of the wizard with this message: "there was an error in setting up the account. Please contact your administrator. " After reviewing several other forums (this issue has been much more difficult to find information on then the first described error), this solution seemed to be what has pointed out several positions:

  http://www.Vistaheads.com/forums/Microsoft-public-Windows-Vista-print-fax-scan/50649-fax-account-Wizard-error-2.html

  This solution involves deleting the registry keys for accounts via regedit. I tried this, and it did not work.

  It doesn't seem to be that much more that I can do. I was ready to try a restore of the system on the server, but apparently there were not a restoration of recorded images, even if this isn't an option.

  Are there any other fixes documented for this?

  Hi JaredGohr,

  I suggest you to send your requests in the link for better support below.

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

  I hope this helps.