public property and instantiation of the component problem

Similar Questions

• My wifi cut continuessly and I bought an optus modem and im having the same problems can anyone help?

  what I did to my computer?

  what I did to my computer that makes my wifi cutting continuessly and I bought an optus modem and im having the same problems can anyone help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 2:

  Try to update the latest drivers for the network adapter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thank you

  Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thanks in advance

  Just a thought...

  It may be interesting to try to open Movie Maker and go to...
  Tools / Options / compatibility... tab and left click of the
  "Restore all defaults" button / OK.

• my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

  my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

  Hi David,

  1. what exactly happens when you try to configure Adobe Air?

  2. you receive all of the error codes or error messages?

  If the installation of AIR was very good and you are facing problems with the configuration, you may need to contact Adobe support for further assistance.

  Adobe support

• Public property of custom in the property panel component

  Hello

  I have ready a few days ago an article somewhere on public property of component adding custom in the Panel property of Adobe Flex 3 using a few Metatag.

  Today I thought to add my custom in the properties panel component property, but could not do, I can't even remember the meaning of this article.

  Could you please guide in this matter?

  Thank you.

  See the description of Inspectable tag in docs: http://livedocs.adobe.com/flex/3/html/help.html?content=metadata_3.html

  There are a number of categories for grouping.

  Property	Type	Description
  category	String	Includes property in a special subcategory in the property inspector UI Flex Builder. The default category is 'other '. Specify a value of 'Common good', 'Effects', 'Events', 'Layout constraints', 'Size', 'Styles' or 'other '.

• Instantiation of the component before complete analysis of xml

  Hello!

  I have a custom component based on a canvas that contains a number of Accordion menus. The data model for the component is created when an XML file is loaded and parsed. This method works locally without problem. When on a test server, however, my request apparently trying to create my custom until the model has been created and produces a null value error (the model is related to my component in mxml properties).

  Wondering if anyone has some advice to offer regarding this issue? Can you suggest a convenient way to see the instantiation of my custom component until I am sure that my model is instatiated and contains data?

  I changed my code to load the XML for my model in the phase preinitialize of demand and it seems to work but I have no confidence it is the right solution and will work as expected. If I can still talk, this also brings another question - when ends phase preinitialize? If I call a method of HTTPService.send during this time am I actually pause the application while waiting for data to be returned? It's very confusing to me.

  Thanks in advance for any help offered!

  Joel P.

  One approach would be:

  myCompModel ="" / >

  http://www.Adobe.com/2006/mxml '.

  xmlns:components = "components.*" >

  private var _myCompModel:MyModel;

  public function get myCompModel (): MyModel

  {

  Return _myCompModel;

  }

  public function set _myCompModel(value:MyModel):void

  {

  _myCompModel = value;

  If (value)

  populateAccordions();

  }

  public function populateAccordions (): void {}

  Use the _myCompModel data to complete the accordions.

  If called too early, _myCompModel is null and this generates an error

  Another approach would be to implement the model as a Singleton.

• Microsoft Visual C++ 2005 Redistributable and says that the component you are trying to use is on an unavailable network resource

  Vcredist.msi
  I have Windows XP and just upgraded my Zone Alarm Internet Security Suite to the new version. The parental control available in it says they are available but not installed. I click on install and a window will appear titled Microsoft Visual C++ 2005 Redistributable and says the component you are trying to use is on a network unavailable resource. I need help to understand this.

  Hi brianr30,

  I suggest that you download the latest version of the Microsoft Visual C++ Runtime manually and check to see if it helps.

  How to get the Visual C++ 6.0 runtime components

  http://support.Microsoft.com/kb/259403

  If you're still having problems, then you will need to contact ZoneAlarm support for assistance.

  https://support.ZoneAlarm.com/

• Understanding of the instantiation of the AM problem

  Hello
  I have an application module (AbstractService) and I generated the implementation for the module (AbstractServiceImpl) class. I have a vision, "AuthorListView" and I added the request below Module.So view is my request module class.
  
  public class abstractserviceimpl extends ApplicationModuleImpl implements {AbstractService}
  /**
  * This is the default constructor (do not remove).
  */
  
  public static int idProducer = 0;
  private int in the Middle;
  
  public AbstractServiceImpl() {}
  in the Middle = ++ idProducer;
  getAuthorRegistrationView () .clearWhereState ();
  System.out.println ("AM with the ID" + middle + "is created");
  }
  
  /**
  Getter of the container for AuthorRegistrationView.
  * @return AuthorRegistrationView
  */
  public AuthorListViewImpl getAuthorListView() {}
  AuthorListViewImpl autorListView = (AuthorListViewImpl) findViewObject ("AuthorListView");
  Return autorListView;
  }
  
  ------------------------------------------------------
  
  }
  
  CASE 1:
  I have the view above binded tabular form on a jsp page. I see that whenever I call the jsp page, the above (AbstractServiceImpl) class get instantiated (I see the messages of SOP in the constructor). But it does not call the method "getAuthorListView()" to fill the table. How does the interator (executable) in the jsp page gets data if it does not call the method "getAuthorListView()" of the AM class above.
  
  
  CASE 2:
  Here I have another method on the AM class, I call my managed bean. When I call this method from managed bean, getAuthorListView() method is called.
  {} public boolean checkIfAuthorIsRegistered (String authorEmail)
  AuthorListViewImpl authorView = getAuthorListView();
  If (authorEmail! = null) {}
  authorView.setWhereClause ("upper (email_address) ' =: TheEmailAddress" ");
  authorView.defineNamedWhereClauseParam ("TheEmailAddress", null, null);
  authorView.setNamedWhereClauseParam ("TheEmailAddress", authorEmail.toUpperCase ());
  System.out.println (authorView.GetQuery ());
  authorView.executeQuery ();
  If (authorView.GetRowCount () > 0)
  Returns true;
  }
  
  
  Returns false;
  }
  
  
  My hypothesis is pooling of instances of class AbstractServiceImpl uses. But in the first case why isn't call the getAuthorListView() method and in the second case why he calls?

  No worries and thank you. Happy JDevelopering.

  CM.

• FSX and FSX acceleration not will not activate after the uninstallation and reinstallation of the following problems with Windows 7 upgrade

  After the upgrade to Windows Vista Ultimate SP2 Windows 7, I couldn't FSX to load.  It would hang at the splash screen.  This has since been resolved and may have been a conflict between my card graphic and sound card and maybe even my webcam.  I then tried to reinstall FSX.  However, I decided to load up the Accerleration as before, but when I entered the activation code it says after trying that he could not get an answer to the server and to verify that I had an internet session active.  I did, but he always refused to activate.  So I uninstalled FSX acceleration and ran repair on FSX.  But now, he wants the activation code for FSX and when I write this so I always get the message that it cannot get a response from the server, please try again later or check that your internet connection is active.  I have the full internet connection, but doesn't understand why it won't save my activation codes.  I am limited to 30 minutes and cannot be installed acceleration as it wants the code for FSX.  I read on the forum that you can uninstall and reinstall on the same computer as many times you like then why used enable it?  It seems that he doesn't like my internet connection even though I am on the internet.  Anyone has any ideas. My pc is a Dell Inspiron 530 s with Nvidia 9400Gt card and card Soundblaster with 160 gb 1.66 ghz, 4gig ram and router Netgear WGR614 cable wireless

  Hi steve, I managed to install in the end.  I upgraded to a hard drive more that I wanted more space and copied the image to the new drive.  FSX is not yet accept the keys during the installation.  I ran the above utilities (see blog Amritas) to clear the license keys, empty temporary folders and change the registry entry by using 'regedit' on the command line, but still his wouldn't.  In the end, I installed and uninstalled three times until I finally installed it on a partition on the drive and he finally accepted the license keys.  This was done on the original admin user account that I had problems with from the start.  I have now it works.  The utility I used was KB928080 Microsoft.   I can only suggest you keep trying or partition of your hard drive and try and install on the new partition after erasing the license keys and temp folders (see above Amrita).  I can't guarantee that it works well.  To me it's a question of licenses i.e. acceleration has been uninstalled and reinstalled many times so it will no longer accept the license keys.  Happy installing! I don't know how is it frustrating.

• After upgrading from windows and reboot "diagnose the connection problem" rises and won't let me use windows until the removal of updates

  diagnose the connection problem

  You can try to uninstall the update 974455 that came out last Tuesday, removing it seems to have resolved other

• I can no longer import clips for my external drives... final cut gives me the ability to import on my hard drive... you just buy a new drive for G and I have the same problem

  I used to be able to import clips on my external drive of G and change events I had saved on the drive, but this problem started after I tried to import video from a camcorder sony I had connected the G drive.  Now when I try to import the clips, it don't give me the possibility to choose one of my records G, I can only import directly on my hard drive.  I can't open the previous events I backed up on my external drives.

  What version of FCP X?

  Russ

• Download ADF DURATION and demo of the component for Version broken 11.1.1.7.0

  Download of the duration of the ADF and component demo for version 11.1.1.7.0 is broken (Application Development Framework downloads)

  After selecting the version and accept license, you are transferred to an error page.

  Timo

  Not quite sure how you get directed to the area of the oracleimg.com, but if you navigate Oracle.com or OTN you will come to the correct download page where he works:

  Application Development Framework Downloads

• Timer standby and resumption of the workflow problem.

  Has anyone ran this question before, and if so, how do solve you?

  I have a fairly simple workflow that I use in my Sleep function in my workflow:

  

  'Set date' just creates a date object that is waiting specified seconds time in the future, then called "Pending timer" by that date.

  It seems to work great, workflows suspended as they should, reducing the load on the server so that its waiting for the next thing to do.

  However, if the server is restarted and workflows resume later never seems to trigger the "timer on hold". I guess it's because while he has to wait for is in fact in the past.

  Anyone know of a way to solve this problem or a better way of suspending the workflow without using System.sleep ()?

  OK, so it seems that this is a problem with 5.1.0 build 2725. I don't know how it was fixed, but it works in 5.5.1 build 1617127.

  The question is that "Hold timer" does not throw an exception if the date he expects in the past in 5.5.1 it does.

  I changed the flow of work to properly handle the case where the vCO server is restarted while the timer standby is suspended.

  

• Bug? Photo ring String property and values' returns the error 1054 in LV 8.5

  

  This property must exist for a ring photo?

  Ben

  James W wrote:

  I take it from what I read here that there as no way to programmatically update the values of a ring of photo running then?

  ...

  You are right that a RING of photo may not be populated at run time. On the other hand an image can be updated.

  This thread has many links to examples of photo.

  These tags can also help start with the photo of LV.

  Have fun!

  Ben

• Cloning and healing of the screen problems

  I'm using CS5 and today, whenever I try to use the stamp of duplication or Healing Brush tool, after I "alt-click on" my point of reference, when I move the cursor, the entire screen moves.  I tried to update my video driver thinking maybe that was it, but Windows says that the driver is up-to-date.  Need help!

  Thank you

  Scott A. Breaux

  Have you tried to reset the tool and or the Photoshop preferences file?