Similar Questions

• Others that touch has changed to custom in the properties panel

  Hello

  Don't know how I did it, but don't know how to cancel it.  Somehow, I changed the other button in the custom property Panel.  I use DW CC 2014 so don't know if this is an upgrade in 2014?

  Any ideas?  See attached screenshot

  Thank you

  The only thing I didn't understand about is why it's different CBWMS and PCOC 2014.

  You will need to ask about the 'authorities'. I have exactly the same thing. Until you said it, I didn't even notice the BOM change, and frankly, I think it's better as "custom".

• Category custom in the components Panel (Flex Builder)

  Flex Builder 3 has all the custom components in a folder named "Custom" in the Panel "components."
  I want Builder to put a bit of my custom components in another folder, for example "MyCompanyComponentsSet".
  The same problem is when I have a lot of projects and reusable components that I use in these projects. Each project has a unique set of components which I want to distinguish it from the reusable set of components and it is difficult when all the components are in a "Custom" category, so I want to several categories.
  Is it possible to do? And if so, how?

  Found an answer here:
  http://sudhahariharan.WordPress.com/2008/05/29/library-projects-and-customization-in-Flex-Builder-3 /.

• Stop automatic checking of the parameters on the search panel Call

  On the search screen call, when we choose a customer location and organization fields on the search panel auto-fill with the current values of the client and the two options are checked.

  I know it's just trying to be helpful, but our leaders find it very annoying, because our organizational structure changes regularly and that is why we must always uncheck the two boxes of these search criteria to make sure we get all the calls for the customer.

  How to stop the location boxes and organizing be checked when we select a customer on the search panel call?

  Thank you
  Ian

  I guess you can find the solution here.

  Tell me if this is not enough - clear I'll give you a little guide.

• Create and save custom property panels

  Is there anyone who has worked on "Custom property Panel" in Webcenter? However, I tried something using the link below, but it doesn't seem to work.
  
  http://docs.Oracle.com/CD/E16340_01/WebCenter.1111/e10148/jpsdg_page_editor_adv.htm#CHDCJGEC
  
  Can anyone suggest me possible approaches step by step?
  
  Thanks in advance.

  Hello!.

  You can download a sample of here custom panels: http://danielmerchanoracle.blogspot.com/2011/11/extendiendo-oracle-composer.html

  PD: It is in Spanish.

  Kind regards!.

• Can I programmatically change the default property to create for all elements of the front panel?

  Can I programmatically change the default property to create for all elements of the front panel?

  I need to make the logout button, when click on, takes care of all the default values of my fron Panel.

  There is no way to programmatically call the functionality of an editor 'Use default' or 'Load Default'. To do it yourself, you will need to write your default values for each control explicitly in the diagram, when the user press the logout button.

• Why can I not format my text in a cell in my table using the property Panel

  If I use my property Panel to adjust my table it will then apply my changes, but when I click in a cell and try to move my text to the Center or add color it does not apply my changes.

  Does anyone have any idea why this could be please

  Oh my God, I got it back, I had deleted a hug!

• System cleaned after the attack of virus/malware using 6 recommended tools - 90% of the system is back to normal, but most of the options in the custom of open Control Panel!

  The system was attacked by a virus/spyware. Microsoft Security Essentials has been installed after that - it found nothing after a comprehensive analysis. Malwarebytes Anti-Malware has been installed, it is the largest part of it and removed. Norton 360 has found rest. SuperANTISpyware has also been installed and this has also nothing after a system scan. Then ATF Cleaner and CCleaner were used to finish with what anyone else remaining areas may be temporary.

  So right now the system is more or less fine - programs running, the internet works etc. However when I open the control panel and click on a bunch of things for example Security Center, Sound, customization etc - they open habit. You see that the cursor turns into the blue circle for a fraction of a second and then more nothing. No window opens and closes or whatever it is. Now, I assume that the pieces of the virus/spyware are still active but with all tools using the latest definitions not being not able to find anything like that, I wonder if it's just a case of something having disabled those elements and not them reactivated after cleaning. The reason why I don't think it's something malicious is also because some options such as the Windows Firewall, the Manager of devices and programs and features open and work properly. Any other malicious software would certainly avoid these access as they could help shorten.

  Please help, thanks!

  Hello

  References to Vista also apply to Windows 7.
  
  Make sure that system is really clean before doing this.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------------------------------------------------

  After the foregoing:

  What antivirus/antispyware/security products you have on your machine? Include everything you
  ever had including those that you uninstalled. (These can leave leftovers that can cause strange)
  questions.)

  Search all .cpl files most will be in "C:\Windows\System32" However, you can have
  others. Click on each of them at a time and see if it does not start - if so right click on it and
  Rename using cpZ as the extension is is to find it. Try Control Panel - if no Dungeon of joy
  try all the .cpl files. (Note that other people find other subfolders under C:\Windows should
  not be judged because they are not active.)

  Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and
  others.

  Icons do not appear in the Control Panel, or you cannot start Control Panel, the Welcome Center,
  or games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  The Control Panel window will not open in Windows Vista
  http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

  =====================================

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation.
  Be sure to do a good backup or three.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Check with your system manufacturer that they all slightly different methods. They may have
  included a recovery Partition or other methods to restore the default value. As the manufacturer of your system
  We will sell you the physical disks cheaply since you already own windows.

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Error, "Page failed to Load", while customizing the control panel.

  Hello

  I recently inherited a second hand dell tower which has Windows 7.

  Everything seems to have set up ok but when I go into control panel customization, I get the message "Page failed to Load".

  After having sniffed around, it seems that the Control Panel does not use a program that the computer recognizes.

  I went through various forums for the answer, but nothing helped.

  Any suggestions?

  Hello

  Thank you for the update. It is unfortunate to know that you still experience this issue.

  As you are facing the issue in the safe mode, as well as in the new user account, it seems that there is corruption of system files that cannot be replaced by the new file system. But, you can also try to check your hard disk for errors of the last step. Read the following article.

  Check your hard drive to find errors in Windows 7

  http://support.Microsoft.com/kb/2641432/en-us

  Warning: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Please, try the steps above and update with the State.

  Thanks again for we keep posted!

• see the updates Panel for a secondary VI being called by a parent

  It is a good text on this topic

  http://digital.NI.com/public.nsf/allkb/F0B8453E5DEA09E986257115006E9F9B

  The possibility to postpone the update panel must be made in the parent VI and Subvi.  If the property node to postpone updates of the Panel is embedded in the Subvi due to specific code groups, means that VI Ref must be transmitted in this code and carried forward by its own property node defer Panel updates in addition to the Subvi the parent itself?

  Someone with experience on how to proceed would be beneficial.

  If you only want to see the updates in the secondary, you need NOT to postpone updates to the appellant. The article you link talks about LV<8.2. i="" can="" say="" from="" experience="" that="" in="" later="" versions="" it="" works="" fine="" if="" you="" only="" defer="" the="">

• How to make non-visible control on the Front Panel appear at Design time?

  I have a few controls on the front whose visibility is changed (on or off) at run time. The problem is that if I stop the Run time, the visibility of the control remains in the running in design mode state. So I am not able to see or find the control to make changes in design mode.

  How can I make all the visible front-panel controls, or find and make it visible to a control on the front whose visibility has False?

  Thank you.

  It is documented in the help of LabVIEW.

  Hidden front panel display

  
  

  Perform the following steps to display a hidden front control or indicator. You can also hide the indicators and controls on the front panel.

  1. Find the terminal block schema for the object. "If you have multiple devices with the same type of data, right click on the terminals and select visible elements" Label in the context menu. Find the object with the label that corresponds to the object hidden façade.
  
  
  2. Right-click in the Terminal, and then select Show Control context menu if the object is a control or indicator to show if the object is an indicator.
  
  

  You can also use the Visible property to display the controls and indicators by program.

  You can also view all hidden front panel controls and indicators.

  Path: Fundamentals-> build the façade-> how-to--> configure the objects-> display on front panel of the façade hidden object.

• Cannot resize the front panel

  I can't resize the front panel to a smaller window.  I put in (0,0) minimum window size, unchecked maintain proportions and to scale all objects.  I had originally put the size of the minimum window to 1012 x 616.  When I close the window property and re - open the settings still collated (0,0) while they are saved, but I am unable to reduce the size of window smaller than 1012 x 616.

  Also, there is open space on both sides in both dimensions, so I'm not running in the front panel objects.  What property/properties miss me that locks the minimum panel size?  One last thing is that I'm able to resize windows from any SubVIs I the same project and edit the minimum window size them and they respond as expected.

  Thank you

  Very strange

  comics ctrl + A, ctrl + C, ctrl + N, ctrl + E and ctrl + V solves everything.

  NOR should open with a debugger that vi... Oh where is that entry again heep peek ini thing...

  [Edit: here]

• How do to update and refresh the main panel image appears inside the Subvi?

  Hello world

  I have an image to display the command that is in my main draw, and I have a Subvi making some process works inside.

  But what I did inside the Subvi cannot be seen in the main panel.

  I used the image session controls than nodes input/output for Subvi.

  If I use the view control image as input for Subvi node,

  I see that the actual time appears in the Subvi Panel,

  but this isn't what I wanted.

  someone at - it wise?

  aricn wrote:

  BTW,

  inside the Subvi, I pass the transformed result the Vale to property node or the Vale (signal), even I call the metheod "refresh view", nor have the effect.

  Strange.

  For example, it is your main VI (where is placed the Image display):

  

  It's your Subvi, where poster Image is updated by reference:

  

  Now, image display updated in Main.vi Subvi:

  

  Project (LV2012) as an attachment.

  Andrey.

• The front panel indicator background color manually

  Hi I'm trying to color of the lights on the front panel depending on whether a test was successful or not. I created a Subvi to do the job, but I can't choose the right to the property to be set depending on what type of indicator is in color (ie. digital or string) then I used a case statement and try to detect what type of reference is passed in so I can set the right to property. I used a number of existing posts about it to this day.

  I seem to be unable to determine the type of reference correctly, I get errors about not being able to cast to the specified type, trying a color string indicator.

  I tried to add a screencapture but the system hung while I attached the VI, any ideas would be appreciated.

  Thank you

  When you compare references, the result tells you whether or not they refer to the same object, it does not tell you if they are of the same type.

  See VI changed to a technique to use.

• How to disable together them on the front panel lights

  I have a VI that the front panel is shown below where an indicator of the chain is having a problem. The witness here shows the value "Please save the value of Temp Air [C]".

  Problem

  When the indicator is clicked on in the front panel the text box becomes 'editable' in appearance (only) and I did not want this

  Question

  How to eliminate the behavior stated below in the second picture, when the indicator also displays editable? How can I simply leave the system in a State of photography ?

  -Normal front photo

  

  Photo of Two - front with click on channel indicator

  

  Justin,

  Try to turn off the indicator. Node property or right click Advanced-> checked-> disabled state.

  Steve