My wifi cut continuessly and I bought an optus modem and im having the same problems can anyone help?
what I did to my computer?
what I did to my computer that makes my wifi cutting continuessly and I bought an optus modem and im having the same problems can anyone help?
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135
NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
Method 2:
Try to update the latest drivers for the network adapter and check if it helps:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
It will be useful.
Tags: Windows
Similar Questions
-
failure of migration on wifi. error message: migration quit unexpectedly. Apparently, the migration is yet complete, but with a lot of mistakes. many programs on the new computer do not work. anyone else having the same problems? never had any problems with apple before. Maybe it's my last mac.
Migration via wifi is a bad choice, physically connect the two PCs with an ethernet cable is the best solution. Start the computer in recovery (command-R) and erase the boot partition. Then reinstall Mac OS X and migrate again using ethernet. Some programs such as MS Office may still have a problem and need to be reinstalled.
-
My iphone will not suddenly be updated to icloud photos? It has been working well recently and I tried restore, reboot, turn iclould off photos and return, etc... can anyone help? well worked yesterday and now not... most of the time the number of photos don't match same new how I am download to icloud...
Have you tried the signature to iCloud and then reconnect?
Try a reset.
-
After that I went to El Capitan, my computer would be close and take forever to reboot. I took it to the Genuis Bar and they said it was us who extinguished the FileVault. I've updated the software on 1: 1 and now, I'm having the same problem again. The computer turns off and sometimes it takes me an hour or two to get started again. Help, please!
refer to this article and move forward with the NVRAM reset at the end.
Reset the management system (SCM) controller on your Mac - Apple Support
If the problem persists, how long have you made it Go?
I would bring out there, but first call Apple.
-
I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)They all install properly but switches back to windows update to install. It's some kind of loop.
Hi billy73,
In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.
I hope this helps!
-
Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thanks in advance
Just a thought...
It may be interesting to try to open Movie Maker and go to...
Tools / Options / compatibility... tab and left click of the
"Restore all defaults" button / OK. -
my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem
Hi David,
1. what exactly happens when you try to configure Adobe Air?
2. you receive all of the error codes or error messages?
If the installation of AIR was very good and you are facing problems with the configuration, you may need to contact Adobe support for further assistance.
-
HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help
Hello Gloria,.
I ask you to execute methods in the following link and check if the problem is resolved.
You can also contact the manufacturer to find out how to clean the print head.
http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en
Please get back to us with the State of the question.
-
Hi, I have the new iMac and I am trying to install the old version of ADOBE CS 4. Wenn first disc (1 Application) is finished program request mi put in the disk #2. If I click ok nothing happens and I can't leave the facility. Can anyone help?
Hello
Try to download the CS4 application from the link below:
Kind regards
Sheena
-
I try to sync a new phone 6 s with tunes11.4 and receive an error message saying that the phone cannot be used because it requires a newer version of itunes. I've updated the phone and itunes. can anyone help?
Sorry, iphone and itunes.
-
Tried several times. Windows Update keeps prompting me to install but it fails every time.
I was finally able to solve the problem of not being able to update KB975051 and KB976882 by taking the following measures:
In Google I typed in 'the kb976882 will not be installed. Under options, I got "Download Details: update for Microsoft Office Outlook 2003 Junk...» "the site of Microsoft.com/downloads. I downloaded from this site and then also picked KB975051 on other popular choice located lower on the page and done the same thing. I don't remember this solution being a few days ago.
I hope you find that this approach works for you as well. Ignore the entrance of miss under my name as proposed in another comment response. I have missunderstood as a way to comment on...
Craig -
Well, it says to reinstall Windows XP. It was running real slow, sometimes does not connect to the internet. so I reinstalled. He said the same thing and now my anti-virus, and fire fox does not work well. Can you help me?
Your description of your problem it seems rather you are infested with malware and a proxy server has been implemented. It is always sensitive in this situation to achieve a malware check.
Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
Download and run SuperAntiSpyware (Free Edition)
http://www.SUPERAntiSpyware.com/download.html
Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/
-
can someone help
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
- and https://forums.adobe.com/thread/1572504
or
Serial number and activation support chat (non - CC) can help
-
HI trying to access pdf of simple energy service provider bills (have adobeX) and 8 months do not have as a guard, saying that the file is damaged. Company has said that it is my end, but do not know what to do. His single pdf can't open?
Just got another new copy of the PDF of the same provider and did as you suggested again, the PDF attachment to email click right and save the link on the desktop and then went to Adobe reader and made of the open folder and WOW he opened. Lesson is never open attachment from this provider with the link recording first, then go to Adobe Reader 2nd and opening through Adobe Reader file.
It is therefore likely to be my system, and if I'm not the process you suggest that before any other process will damage the file at the time that I open it. I will consider this resolution if it never happens again with all the other PDF files sent to me, but he still only has this one supplier. Thank you for your help, cheers, Annie
-
I used to be able to import clips on my external drive of G and change events I had saved on the drive, but this problem started after I tried to import video from a camcorder sony I had connected the G drive. Now when I try to import the clips, it don't give me the possibility to choose one of my records G, I can only import directly on my hard drive. I can't open the previous events I backed up on my external drives.
What version of FCP X?
Russ
Maybe you are looking for
-
IPhone 6 black screen after failure to recognize my code
iPhone 6 + would not recognize my access code or print, then the screen went black. cannot disable... always active phone
-
"My screen" application on Windows 2008
He does ' t work. Is this normal for this application?
-
How can add other software to my design
Dear engineer I need to add another software for my design of labview. I want this other software for binding in the my design of labview. How can I add another software for my design of labview. Please help me on this problem. Thank you & best regar
-
How to release and renew the IP?
I use adsl modem and I want to know how to release and renew the dynamic IP address. When I type ipconfig/release, he returned to "the operation failed as no adapter is in the State permitted for this operation. Anyone have any suggestions on what ev
-
Freezing up ONLY when it is PLUGGED in, DO NOT when executing a battery
I'm having a problem with my computer toshiba laptop. When I plug it and use it, it freezes. After many experiments, I discovered that when I leave it unplugged and run it just on the battery, it does not freeze upwards. Help. This is crazy. What