Public static matte or mask for a music video with keyframes (movement, change in position over time)

I want to create a static 'window' through which I see a clip that has keyframing but I don't want the 'window' (matte or mask) to move. How can I dow that?

Nesting the clip of retouching and apply the matte to the nest.

Tags: Premiere

Similar Questions

  • I want a music video to play when the user hovers over a button

    Hello

    I want a music video to play when the user hovers over a button, but I don't want the music to start again when the user hovers over the button again. I want him to play for its entire length, does not restart if the user accidentally will be on it once more.

    Thanks in advance for any help.

    You can use:

  • How much space is left on the 128 GB on an iPadPro once I set it up basically? I can't find the info on the USA site.  The Dutch site 128 GB is advertised as being available for photo music etc. with A) a warning B) in small print: 'r '.

    How much space is left on the 128 GB on an iPadPro once I set it up basically?

    I can't find the info on the USA site.

    The Dutch site 128 GB is advertised as being available for photo music etc.

    (A) a disclaimer clause

    (B) in small print:

    "the actual formatted capacity is lower.

    How much more low (base configuration)

    THX, Klaas

    After the formatting and the Apple apps installed, a 128 Pro iPad ends up with 114 GBs of usable space.

  • How can I sync my music video with my reading in preview?

    So I have a problem-newbie in Adobe Flash Professional CC, my music video is out of sync with playback from the timeline. I want to have an After effects - like experience, where my reading 'line' is synchronized upward with the waveform that I see. Audio also plays when I start from the first keyframe and when I try to start a preview of later in the animation, the sound will only play at all. Right now, I have to drag the aaaaaaaaaallllll end of the track to the right frame until it reaches the end of the music, so that he cut out the music when I press CTRL + ENTER.

    This photo shows what I mean a little more in detail. Sometimes I'm display are not real, there overdramatised just to explain what I got.

    Untitled.png

    It's really annoying to not be able to use the waveform in the timeline as a good indication where the music REALLY is, and I have to read from the beginning to be able to hear the music at all. Animation to music is just about impossible when faced with this.

    Does anyone have a solution?

    If so, I'd be very happy.

    Emilian

    EDIT:

    I found the solution!

    In the properties of the music to the title of 'His', the Sync Stream value. That will fix the wave being out of sync!

    If you have yet to drag all the way, it fixes a lot of things. I can even hear on each image preview.

    Glad that you solved it the. Please indicate your question as responded to others if you are looking for something similar is the solution.

  • Anyone know what mean the lines angled on a first layer.  I have the k 4 under dng raw file and I have an alpha cineform on top layer.  It looks good for the music video, except for the part of the oblique line, there is no present FX.  Anyone know what t

    WarShot.jpg

    These are stripes of danger, meaning that there is no media for the portion of the clip. The most common reason for this is that if you linked to the bad press for this clip which is be shorter than the source it should point to. To repair, make the source for this clip mode off connection, then manually navigate to the media appropriate for it on the drives file and strips of danger should disappear.

  • After you migrate for Dev to Test with LCM, to change the order of forder dataform

    I migrated artifacts all planning with LCM for my Dev environment to test a. There is no error after that the migration, but the sequence of the form forder has changed. I don't want to rebuild the forders by hand, how can I solve this problem.
    Version information: 11.1.1.3.0

    Known problem - 10140764 Bug: FOLDER ORDER DIFFERENCE in THE MIGRE APPLICATION.

    After a migration from the management of the life cycle, the order of directory on the destination application differs from the order of law enforcement source directory.

    Not yet fixed. Reproducible in 11.1.2 as well.

    HTH-
    Jasmine.

  • The existing video (with sound) creation in phase with a background music track

    You want to add a video with sound (movie maker) be in line with existing background music.  Someone singing a song in sync with an existing musical track

    Hi Michael,

    1. What is the operating system installed on your computer?

    2. using Windows Live Movie Maker?

    Please post with more information on this issue to get help.

  • {} Public static

    Boy, it is difficult in 53 and feeling totally stupid, but Java can do it for me.

    I; have my head wrapped around statics and constants and static methods, and I found (thankfully) one of the examples which allowed me to analyze step by step to better understahnd the language (it's my best course).

    However, it baffles me: things wrapped in JUST {} public static.  I've been Googling like crazy, but all the explanations are either variables or class, not fopr this thing.

    Here is an example of the MemoryDemo example I discuss:

    // Statics -------------------------------------------------------------------------------------
    private static Random _random;  To generate random numbers for dates and channels.
    private static ubyte [] _letters; To generate random strings.
       
    // Constants -----------------------------------------------------------------------------------
    private static final int MIN_STRING_LENGTH = 3;   Minimum length for a random string.
    private static final int MAX_STRING_LENGTH = 10;  Maximum length of random string.
       
    public static
    {
    _random = new Random();
    _letters = new ubyte [MAX_STRING_LENGTH];
    }

    So, I understand not statements made by the statics and constants... no problemo.

    But what is the reasoning behind the encapsulating the _random and _letters inside the {} public static?  Is it just a kind of shorthand for something else?

    Again, I apologize for what must seem like stupid question, but I don't want to jump on something that I think moight be crucial to understand.  Thanks in advance (again)!

    -John

    I don't see why initialization that you see in this class could not be done as you suggest.

    However, there are other situations where this isn't the case.

    For example not elegant and simple (there are other better ways to dong that), you can have a static value that identifies whether the device is a touch screen,

    If you have

    public static boolean IS_TOUCH_SCREEN;

    public as well as any other class can test this just by using .IS_TOUCH_SCREEN

    {public static

    String pattern = DeviceInfo.getDeviceName ();

    If [(model.startsWith("95"))

    IS_TOUCH_SCREEN = true;

    } else {}

    IS_TOUCH_SCREEN = false;

    }

  • public static nat/global vs

    Excluding an access list, what is the difference between:

    NAT (inside) 1 172.16.5.10 net 255.255.255.255

    192.168.5.10 (outside) 1 global net 255.255.255.255

    and

    static (inside, outside) 1 192.168.5.10 172.16.5.10 net 255.255.255.255

    Thank you.

    in static reality must be combined with the access list for a two-way communication... You are right in a sense that

    public static nat/global access-list =

    Basically, the rule is that the traffic is allowed more high to low infterface of default security

    BUT

    from the lowest to the highest security of communication you need an access as well as the STATIC list

    Thank you

    Nadeem

  • public static problem (inside, outside)

    I use a PIX to isolate a subnet to a corporate network.

    inside is the corporate network

    outside is not approved LAN

    A single user in LAN not approved need to go to a specific set of IP addresses in

    And all other users can browse the Internet via downstream

    proxy server to talk to the corporate proxy server

    It works fine,

    Why I can't use the static suite for this

    public static 159.182.111.0 (Interior, exterior) 159.182.111.0 netmask 255.255.255.255 0 0

    problem is that I have to continue to add each ip address static statement such as

    public static 159.182.111.50 (Interior, exterior) 159.182.111.50 netmask 255.255.255.255 0 0

    public static 159.182.111.60 (Interior, exterior) 159.182.111.60 netmask 255.255.255.255 0 0

    public static 159.182.111.70 (Interior, exterior) 159.182.111.70 netmask 255.255.255.255 0 0

    public static 159.182.111.80 (Interior, exterior) 159.182.111.80 netmask 255.255.255.255 0 0

    Unfortunately this site VIEW use different IP addresses in the subnet, everyday

    Is any limitation of this ststic command at the low security access

    interface high security by using the static command

    Hi, I don't know, but the problem may be in the netmask in your static instruction,

    It must be 255.255.255.0 or so because it is a network and not a host.

    hope this helps.

  • Public static political static NAT in conflict with NAT VPN

    I have a situation where I need to create a VPN site-to site between an ASA 5505 using IOS 7.2 and a Sonicwall NSA4500. The problem arises where the LAN behind the Cisco ASA has the same subnet an existing VPN currently created on the Sonicwall. Since the Sonicwall cannot have two VPN both run on the same subnet, the solution is to use policy NAT on the SAA as well as for the Sonicwall, the new VPN seems to have a different subnet.

    The current subnet behind the ASA is 192.168.10.0/24 (The Sonicwall already has a private network virtual created for another customer with the same subnet). I try to translate it to 192.168.24.0/24. The peer LAN (behind the Sonicwall) is 10.159.0.0/24. The ASA relevant configuration is:

    interface Vlan1

    IP 192.168.10.1 255.255.255.0

    access extensive list ip 192.168.24.0 outside_1_cryptomap allow 255.255.255.0 10.159.0.0 255.255.255.0

    list of access VPN extended permit ip 192.168.10.0 255.255.255.0 10.159.0.0 255.255.255.0

    public static 192.168.24.0 (inside, outside) - list of VPN access

    card crypto outside_map 1 match address outside_1_cryptomap

    In addition, there are other static NAT instructions and their associated ACLs that allow certain traffic through the firewall on the server, for example:

    public static tcp (indoor, outdoor) interface smtp SERVER smtp netmask 255.255.255.255

    The problem is this: when I enter the static strategy statement NAT, I get the message ' WARNING: real-address conflict with existing static "and then it refers to each of the static NAT statements reflecting the external address to the server. I've thought about it, and it seemed to me that the problem was that policy NAT statement must be the first statement of NAT (it is the last one) so that it is run first and all traffic destined to the VPN to the Sonicwall (destination 10.159.0.0/24) tunnel would be properly treated. If I left him as the last statement, then the other static NAT statements would prevent a part of the 10.159.0.0/24 network-bound traffic to be correctly routed through the VPN.

    So, I tried first to my stated policy NAT upward in the ASDM GUI interface. However, moving the declaration was not allowed. Then I tried to delete the five static NAT statements that point to the server (an example is above) and then recreate them, hoping that would then move up the policy statement NAT. This also failed.

    What Miss me?

    Hello

    I assumed that we could have changed the order of the 'static' , the original orders, but as it did not work for some reason any then it seems to me that you suggested or change, that I proposed should work.

    I guess that your purpose was to set up static political PAT for the VPN for some these services, then static PAT of public network access, then static NAT to policy for the rest of the network in-house.

    I guess you could choose any way seems best for you.

    Let me know if get you it working. I always find it strange that the original configuration did not work.

    Remember to mark a reply as the answer if it answered your question.

    Feel free to ask more if necessary

    -Jouni

  • Mask for some frames?

    I wish I had a mask only for a time on my images. I mean, it's... I have 30 seconds of footage, I want to leave say 10s and 15s to see that some of my images, the rest when I want images unmasked. After this point, I don't want anything hidden more head room. How I managed to do this was by double-clicking on the rectangle tool (this mask set whole sequences). Can I use hold keyframes to change the mask at the desired time. Is there a way to say just After Effects to turn off the mask (see the sequence with no masks) on some images. Thank you

    There are about a dozen ways I can think of to achieve your goal.

    1. Use the track matte and simply animate the opacity. You could use a duplicate of your images with a mask or just draw a shape layer.
    2. Put two masks on your film. The first would be created by selecting the film layer and double click on the rectangle tool. The second mask will be drawn to hide the box allowing you to hide or show. Then the mask modes would be possible to assign to add and animate you the opacity of the rectangular mask.
    3. Draw a mask and then animate mask expansion. This would give a nice effect if you also anime feather mask as the expanded mask.
    4. Use Effects > channels > presets and animate Alpha Set of Alpha to full
    5. Use Effects > channels > channel shift and animate take Alpha's Alpha to full
    6. If you use CC 2014 you could use effect > channels > presets with alpha set to Off, then add an option of composition using the mask and animating the opacity

    I could go on and. If there is no animation required for a mask I almost always use a matte. I find much easier to deal with for most of the projects.

  • Public static LOV

    Hello!
    (Version 4.0.2 of the APEX)

    I need definition LOV that returns multiple values for a display value. For example, when I select the return value TV is 1, when I select RADIO return value is 2. And when I select what I want to return to the 1 and 2 values.

    List of values definition should be something like this:

    STATIC: All; (1,2), TV, 1, RADIO, 2

    Is this possible? Without any plugin, like SuperLov...

    Thank you!

    Dark salvation,

    Maybe this thread could help?

    Public static LOV

    Kind regards
    Sandro

  • Public static var - quick question

    Gidday

    Slowly converting my calendar code AIR dekstop app to OOP, and I'm at the part where I am loading in the user settings in a SQL table.

    I was wondering, is a public static var one good thing to use for holding user settings?

    I thought I had a class UserSettings user settings that may be held to get and set as they are needed or changed.

    Click Save, I can just walk them and save them in SQL.

    And all my classes can access them if necessary.

    Or is there a better way?

    See you soon

    Be more specific on what is YipeeClass and what he really needs. YippeeClass probably doesn't have access to all settings variables.

    For example, if YippeeClass is a point of view, he's probably just things it is designed to show. Provide you (getters/setters) properties on the view and then your main class for the Document (or better yet, a controller class dedicated) looked at the settings and fill in the properties of the display according to relevant parameters. Don't worry the Document class on how these parameters affect the view - it will be now responsible for displaying to translate the properties in any way (for example, to set the text of a text field). This is known as Dependency Injection.

    If the user interacts with the view in a way that impact parameters, send you an event to the view which is intercepted by a controller or the main document class and that class then will bring the necessary changes to the settings.

    Classes should always know the strict minimum necessary to accomplish all that they are directly responsible, and each class should be responsible for something.  I suggest you get the book associated with the links I posted: Actionscript 3 Design Patterns. At least she would give you a framework to think about such things.

  • Help with public static functions.

    Hey everyone, I worked on a problem for a while and have finally understood just wrong. Google is not helped me to find the right way, so I'm posting it here. I sort of understand what's wrong with my code, but I have no idea how to do right. I'm a total noob to AS3, this is my first project.

    I have a main FLA file called game.fla with nothing on the stage, starting with. The document class is Main.as (shown below). The main class is supposed to manage the switching between the preLoader, mainMenu and game itself. The preloader loads and the player must press play to go to the main menu. The main menu is controlled by MainMenu.as, which adds event listeners for buttons game, instructions and credits. At the present time, instructions and credits just draw responses. When you click on play, I want to remove the mainmenu (not a problem with parent.removeChild (this)); and add the game. This is my problem comes in. I can't say parent.addChild (game), because honestly, I don't know how (I need to set a variable in hand or MainMenu and must it be public, static, etc?). Simplicity seems to be a function called initializeGame() that I could simply call of mainMenu. Problem: I have to do a static function, which doesn't let me use addChild, removeChild or any other variable that I create. Could someone please explain how I could do this job (even if it means change my structure. "I would be happy to learn a better way to deal with this kind of thing). Also, on a side note: if I can't use the static function with add or remove a child, can I optimize the effect later? I want later in my game, that I would need to call functions between classes, on a button click, for example, that affect the scene (or objects in the scene). Can I do it another way? For example, by clicking on an icon of the video game card clip, I would map the movieclip to load. A function that could be described seems the best way to do it, but I'm sure he can otherwise. Thank you much in advance. My code is below.

    Main.As

    package
{
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.events.MouseEvent;

    public class Main extends MovieClip
    {
        private var preLoader:PreLoader;
        private var mainMenu:MainMenu;
        private var game:Game;
        
        public function Main()
        {
            preLoader = new PreLoader;
            addChild(preLoader);
            preLoader.gotoAndStop(1);
            addEventListener(Event.ENTER_FRAME, barLoading);
        }
        private function barLoading(event:Event):void
        {
            var total:Number = stage.loaderInfo.bytesTotal;
            var loaded:Number = stage.loaderInfo.bytesLoaded;
            preLoader.loadingBar.scaleX = loaded/total;
            
            if (loaded==total)
            {
                removeEventListener(Event.ENTER_FRAME, barLoading);
                preLoader.gotoAndStop(2);
                preLoader.doneLoading.addEventListener(MouseEvent.CLICK, doneLoading);
                loaded = null;
                total = null;
            }
        }
        private function doneLoading(event:MouseEvent):void
        {
            preLoader.doneLoading.removeEventListener(MouseEvent.CLICK, doneLoading);
            mainMenu = new MainMenu;
            addChild(mainMenu);
            removeChild(preLoader);
        }
        static public function initializeGame():void
        {
            game = new Game;
            removeChild(mainMenu);
            addChild(game);
        }
    }
}

    MainMenu.as

    package
{
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.events.MouseEvent;

    public class MainMenu extends MovieClip
    {
        
        public function MainMenu()
        {
            playGameButton.addEventListener(MouseEvent.CLICK, playGameButtonFunction);
            instructionsButton.addEventListener(MouseEvent.CLICK, instructionsButtonFunction);
            creditsButton.addEventListener(MouseEvent.CLICK, creditsButtonFunction);
        }
        private function playGameButtonFunction(event:MouseEvent):void
        {
            playGameButton.removeEventListener(MouseEvent.CLICK, playGameButtonFunction);
            instructionsButton.removeEventListener(MouseEvent.CLICK, instructionsButtonFunction);
            creditsButton.removeEventListener(MouseEvent.CLICK, creditsButtonFunction);
                        
        }
        private function instructionsButtonFunction(event:MouseEvent):void
        {
            instructionsButton.removeEventListener(MouseEvent.CLICK, instructionsButtonFunction);
            trace("instructions");
        }
        private function creditsButtonFunction(event:MouseEvent):void
        {
            creditsButton.removeEventListener(MouseEvent.CLICK, creditsButtonFunction);
            trace("credits");
        }
    }
}

    In addition, anny comments on my coding habits and how to improve are welcome.

    in the hand

    var preloader: Preloader = new Preloader (();)

    preloader.addEventListener ("preloadCompleted", preloadCompletedF);

    in the Preloader, loading complete:

    this.dispatchEvent (new Event ("preloadCompleted"));

Maybe you are looking for