Publish an audio stream only (HLS)

Similar Questions

• Cannot record audio streaming - only microphone listed as peripheral.

  I can't record audio streaming because there is only listed as device micro. I checked in the recording devices, see the disabled devices Show disconnected, but there is nothing except micro it (Realtek High Definition Audio). I downloaded and installed the latest drivers from the website of the manufacturer, nothing changes and I looked in the bios to see there at - it no audio devices listed and (perhaps off), but in the bios, I can't access anything except the date/time settings and password changes.

  Help! :)

  Hello JelenaJovanovic,

  Please provide the make and model of your PC. In addition, the record from the audio device or the stereo mix option is available if the sound card or audio device driver supports this option.

  You can check directly with the PC manufacturer to check if the PC audio device supports the registration of the aircraft.

  I hope this information is useful.

  Thank you

• First 13 elements will publish the MPEG file only as audio file

  I first elements 13 and when I try to publish videos in MPEG only an audio file is published. Other formats such as AVCHD and Windows Media work, but I really want to use mpeg to HD quality. Any help is appreciated thank you.

  The first image below is the format of publication I've used. The second image is the result of publish the movie. Although the file is saved as .mpg it plays only the audio (and yes I tried opening with different programs, all the same result).

  

  Windows Media Player is very limited with regard to the types of files it can play.

  Download the excellent and free VLC Media Player and try to play your file with it. I think that you certainly have a MPEG here.

• WTVConverter problem with multiple audio streams...

  The WTVConverter MSFT includes Windows 7 does not correctly handle multiple audio streams. The WTVConverter in the conversion of the format ".wtv' to '.dvrms' instead of keep the main audio stream retains the other stream audio visually impaired. Usually, he keeps the other stream audio visually impaired. NCIS and NCIS Los Angeles, CBS programs have this problem because they include signals SAP (accessibility for blind and partially sighted options)

  How can I tell WTVConverter to include only the main audio instead of the stream audio visually impaired

  Thank you

  Chandra

  Hello, Chandra

  If you think that there should be an option to select a stream when converting, you can leave your comments on the following link:http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  In addition, you can try searching for a free replacement program convert WTV files.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not able to record audio streaming as "what you hear" option is missing from Windows 7.

  Original title: return to xp from w7 I need the internal registration option

  I bought a computer laptop compaq 615 with w7pro installed on it.  I have since discovered that for some reason any microsoft removed internal records "what you hear" function so I now can not record audio streaming and cannot also sound route from one program to another, which, as I'm involved in music, is something I have to do.  for example, I wanted to send audio from ableton live to visualjockey but w7 doesn't let me do that. I wanted to also allows you to record with camstudio but w7 will not realize any record audio.  It seems really stupid and now I can't do a lot of things I used to do on my old laptop with xp

  is there a way to get around this? I'm using the latest drivers.  If I reinstall xp on this laptop is going to find the "what you mean the feature? or y at - there a patch or something that I can use Microsoft?

  Thank you very much

  
  

  My understanding is that stereo mix is only available on some sound cards. You can try the steps on this wire to turn on the stereo mix:
  http://social.technet.Microsoft.com/forums/en-us/w7itpromedia/thread/73415150-ec9b-44EA-8119-a2ea4f901ca0

  If you don't see it after showing devices disabled and disconnected, it is possible that an update of the driver of the manufacturing may add this feature in the future.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to convert video in audio CD only

  video conversion to CD audio__

  How to convert video in audio CD only?

  My suggestion would be to use Audacity (a free audio editing application) to record the audio.  You can then change the audio stream as you seems to (for example, cut into individual pieces) and export it to a certain formats.
  I used it in the past to make an mp3 of the DVD concert album.  It works very well (if there is some time.)

  HTH,
  Chris

  MS - MVP 2010 (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Audio streaming on the entire folio

  We have a customer who is interested in the creation of a 'radio' function, where we would have audio stream through the entire folio. The desired effect would be that audio play continuously and without interruption on each page of each article.

  I know that there is a way to read a local audio file across the entire folio. We have already tested which and it should work perfectly, but the customer would like the audio streaming on the internet because we cannot have the rights to incorporate audio files.

  Do you know if there is a provision to do something like that Adobe DPS? We heard that it might be possible using a set more like managers of browser, but I was unable to find any documentation about it.

  iPad only.

  We do not support creation of audio and video streams using the DPS, creative tools for the moment. There is no way to do it with an overlay of web as the overlay will get deleted from memory once that your player moves to another article.

  Neil

• Reading AVI correctly in Windows Media files, open in Audio mode only in first and SOUL

  Just like the title says - several avi files (30) a customer will play very well, but only open as audio stream in CS5 PP or SOUL.

  Where should I start looking?

  Thank you!

  Looks quite standard MPEG2 video; almost DVD compatible MPEG2. First works fine with most of the flavors of MPEG2, it's like a problem of container. For fun, try to change the AVI into MPG extension; who can force the first using the MPEG Splitter. If it doesn't, post back - there are ways demux (demux) notice in their elementary streams.

  The drag-to-the-new-item-button thing won't help; This is a shortcut to the implementation of a sequence, not a way to force the first to play the video file. First does not care what sequence you use with a particular video file - that's why you can put the AVCHD video in a DV sequence, for example - there format-agnostic with the formats it accepts. If it doesn't matter no, or not reading correctly the project Panel/Source monitor, then the button new item won't do a thing – what you have discovered.

• error occurred when copying audio streams

  So I bought this product and installed and spent about 2 hours going through the tutorials. Now, I decided to make my first record of the sample of a web-based program. I created a new recording project /, size the window, etc. I click on folder, connect to the application, press END on my keyboard and it shows that savings and then BAM, I get "error encountered during audio stream copy" as a small box to pop up. I have no audio turned on or anything. How can I solve this problem?

  I'm fighting the same exact error. I installed Captivate on my other laptop and it worked fine so I thought well, remove it from the original laptop and see what I can do from there. When I went into the Control Panel - Add/Remove programs I couldn't find Adobe Captivate so I ran a installation, check the Add/Remove programs and now he's here, and when I try now to create a project it works... go figure. Don't know what it was but I did check the sound settings in my control panel of two laptops and both were the same, all that I checked were the same - one worked there isn't. The only difference I've found that the laptop which didn't work had the application was on the Add/Remove window, but I was going to start - programs - Adobe Captivate to start if she should have been there. Re-install and see what happens.

• range poor when bluetooth audio streaming

  My Macbook 2015 beginning has brought very poor when audio streaming to bluetooth speakers. my laptop should be in 1-2meters for clear sound without interruption. the most and jump in and out sounds like and scratched old CDs. not in any wall or something just to work from one end of my room the other maybe 3 meters... I have a bar of his sony with streaming audio bluetooth and one pill of beats the range is compatible with the two speakers. If I use my iPhone 6 paired with the same speakers the beach is really good 6 + meters... I've already had the laptop replaced from jbhifi for this problem and the replacement is identical. have apple cheeped out on the inner workings of bluetooth on this model?   I was wondering if anyone else has similar problems of bluetooth with these new MacBook?

  No, my bluetooth works fine. I can even run around the House with my bluetooth headset. I could say, mine is 20 meters. Not sure, but I can go very far with it

• Unable to read the audio stream: no audio hardware is available, or the hardware is not responding.

  my kids are always downloading music and other things on the internet and some without reason, I lost my sound that I get an error that there is no audio device found... or being used?  This was the last message according to test of microspft race driver and then tried to play something of my documents... Unable to read the audio stream: no audio hardware is available, or the hardware is not responding.  Can you help?  Bill

  (1) try reinstalling the audio drivers from the drivers disk that should
  came with your PC.
  (2) try to do a restore to the point where the problem wasn't there:
  Start > programs > Accessories > system tools > system restore
  (3) download and install the latest driver from the manufacturer's website.
   

  Best regards
  Singapore Web hosting

• How to transcribe audio streams in real-time text?

  Hello

  Currently, I listen to a live audio stream voice using Communicator Desktop WAVE on Windows XP. I want to use a voice-to-text application to transcribe this audio in Word or Excel in real time. I'm looking to reproduce the same experience as the direct subtitles on TV. I read that Windows is a speech recognition software and there are also 3 application of the part such as Dragon NaturallySpeaking. Is it possible to what I can achieve this?

  Thank you very much

  dambk.

  Hello

  The speech recognition software is not transcribe audio voice to text.

   
  You can search in your favorite search engine for the voice to transcribe text software.
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also visit these links to learn more:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-speech-recognition

  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-do-with-speech-recognition

• receive unknown audio streams: How can I get rid of an external audio stream through my laptop? It sounds like a radio station.

  How can I get rid of an external audio stream through my laptop? It sounds like a radio station.

  Try this 1:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• How can divide you two audio streams to the speakers and the headphones, using two separate takes?

  I am currently using windows 7 and I want to have music that fate of my speakers then I have game sounds threw my helmet. I currently have Hd Realtek Audio Driver.

  Bumping an old topic.

  I also had this works with the Realtek HD Audio Manager.

  There is an option in the settings: "do front and rear output devices play two different audio streams at the same time."

  Check it and you're good.

  It worked!  Thank you!!  I thought that I should buy a 2nd card audio to accomplish this task.  Can't thank you enough.

  And for the person looking for the option, double-click the Realtek speaker icon in the status bar.  When the window appears look on the left side, click on the pinion (Advanced Settings feature) and you'll see the option right there in the middle of the screen.  Check the box, it will reload the audio driver and you will be ready to go!

• Detect when HTML5 audio stream started playing or failed to load

  I'm working on an application audio streaming using the HTML5 and webkit browser. I created an audio stream using code similar to the following:

  var = new Audio audio
  audio.setAttribute ("src", "url of feed to play here");
  audio. Play();

  I would like to be able to tell the user:

  (1) when the feed was loaded and gets ready to play. This is because the stream can take a long time to load and I want to inform the user that the application works.

  (2) when a feed failed to load. If the flow is interrupted for some reason, I wish to inform the user that something did not.

  Does anyone have any ideas on how I can do this?

  There are a lot of events and properties on the media items. For example, you can add an event handler for the 'mistake' to detect if the load fails. The 'loadeddata' event is raised when data is actually down. There is also an event of 'progress', but I have not much used. There is an event of 'game '.

  I'd be a little careful about the assumptions of State - for example I would not be surprised if the press started playing before being fully charged. Seems to me the type of optimization that someone might throw together

  So I threw the following test code.

  appstart = function() {
      var main = document.getElementById("main");
  
      var b = document.createElement("button");
      var t = document.createElement("div");
      var a = document.createElement("audio");
      b.innerHTML = "Play";
      b.addEventListener("click", function() {
          a.addEventListener("timeupdate", function() {
              t.innerHTML += "Played "+a.currentTime+" of " + a.duration + "";
          });
          a.addEventListener("progress", function() {
              t.innerHTML += "Progress";
          });
          a.addEventListener("load", function() {
              t.innerHTML += "Load";
          });
          a.addEventListener("error", function() {
              t.innerHTML += "Error";
          });
          a.addEventListener("playing", function() {
              t.innerHTML += "Playing";
          });
          a.addEventListener("stalled", function() {
              t.innerHTML += "Stalled";
          });
          a.addEventListener("loadeddata", function() {
              t.innerHTML += "Loaded";
          });
          a.src="long.mp3";
          a.play();
      },0);
      main.appendChild(a);
      main.appendChild(b);
      main.appendChild(t);
  };
  
  window.addEventListener("load", appstart, 0);