Publish everything by downloading Windows 10
Hello
Whenever I start my Dell Vostro 3550, he invites me to restart my computer to complete the installation of the updates. But there is no updates installed during reboot. This has happened for the past two months. Now, when I am trying to download the update for Windows 10, it says that there are updates waiting to be installed, and the problem is when I reboot, no updates to install.
Grateful for your assistance.
Concerning
Hello SreehariKarthaSK,
Thank you for showing interest in Windows 10 and visit Microsoft Community.
According to the description, it seems that you can not install the updates, this problem may occur if one or more of the following conditions are met:
- The Windows Update database is damaged.
- Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
- Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
- A required system file is incorrectly registered.
If it helps, try the methods and check them off below.
Method 1
If I'm wrong, you tried not Troubleshooting Windows Update below to solve your problem and if this isn't the same link, then try to run the troubleshooter.
Open the Windows Update troubleshooting tool
http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter
Method 2
If the problem persists, I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:
a. click Start, type "services.msc" (without the quotes) in the search box start and press enter.
b. Locate the Windows Update service.
c. right-click on the Windows Update service and select Properties.
d. in Startup type, select enable.
e. click Start under Service status.
f. click OK.
g. Repeat steps c to f for the following services :
CSP & Background Intelligent Transfer Service.
Method 3
Step 1
If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways
Step 2
Try to follow the steps in the Microsoft Article and check if it helps.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7
If you can not upgrade to Windows 10, I suggest you return the article mentioned below to upgrade your system to Windows 10.
Upgrade to Windows 10 for free
In addition to this, I suggest to know system requirements and for that you can see the article mentioned below.
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
Tags: Windows
Similar Questions
-
Publish everything by downloading a CSV file in a form
We have a master (M) and detail (D) registration form. The main block and can display 5 files at once (multi block)
The recordings will be filled by downloading a CSV file from the hard drive.
Question
If there are 5 records in the csv file, the download works correctly. If this isn't the case, it won't be very good.
We were wondering if there is a few BLOCKS / WEB of property should be defined, which will allow more than 5 documents to download
Please provide your valuable suggestions
Thank you
"Error in the filling of the block" isn't an oracle error message. When the error appears, like her "FRM - 12345 Text". Please post the 3 initial letters and the number 5-digits of the error. Also you said nothing about your version of forms or code that you use to fill the block.
-
Publish everything by downloading the Patch 17767877 - Adaptive case management
Hello
We are working on the case of adaptive management (https://soacommunity.wordpress.com/2014/04/14/install-the-new-user-interface-for-oracle-case-management-11-1-1-7-by-dani... ). I am trying to download a set of patches ( Patch 17767877) for BPM Suite 11.1.1.7 with Adaptive case management User Interfaces, but it is asking password when downloading our Oracle support account. So could you please send me the password in order to download this Patch.
Thank you
Dharma
You will have to reach out to the Oracle customer support to get it.
Quick question, did you think to install "Patch 18072286: SOA BUNDLE PATCH 11.1." 1.7.3'? This grouped patch includes ACM and all other patches and fixes delivered previously created for PS6 (11.1.1.7).
Even if you have already installed the patches on your existing 11.1.1.7 environment, you will still be able to apply successfully the hotfix 18072286 on the top of your 11.1.1.7 environment.
Dan
-
Publish everything by downloading OBIEE 11.1.1.5
Hello
When OBIEE 11.1.1.5 downloading, I get that interrupted and failed. I'm doing something wrong? or y at - it another way to download it?
Thank you
SirjacobsUse https://edelivery.oracle.com
-
Publish everything by downloading the information in pdf book
Hi all
I get following error down load briefing in PDF. MHTML works very well.
A fatal error occurred during the processing of the request. The server responded with: the system cannot find the path specified.
Error codes: AGEGTYVFGeographical area: saw.rpc.mis.read, saw.subsystems.remotesubsystemimpl.downloadbookpdf, saw.subsystems.remotesubsystemimpl.downloadbriefingbook, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool, saw.threadpool, saw.threadsthe pointers will be of great help.Hi Bianca,.
Thanks for your reply. I tried access above metlink, he is asked to provide support identifier. Is there a way I can get the direct link to this DOC ID
-
I have CS5 and a d-600. I would like to use camera raw, but does not. I downloaded CR 7.3 and still does not. What I need to upgrade to CS6... or just throw everything out the window and get rid of my d-600?
It allows you to use your RC files, Adobe - Adobe Camera Raw and DNG Converter: for Windows
-
It has been that the downloads window open up everything by downloading. Now all I get is the small arrow icon. It is too hard to see, I love the old-fashioned way. Is this possible?
You can open the downloads tab by pressing Ctrl + J
or you can use this addon:
-
I installed and then uninstalled a program called classicshellsetup that converts win7 start xp features type of starting. I rebooted.
Then my tools/downloads window that was busy was now empty. If I download a file it is OK, but the previous history of a downloads went still. The new download is listed.
Is it possible to retrieve the list of download?
Open Mozilla Firefox.
2Go to the toolbar of the browser and click "tools." On a PC, the toolbar of your browser will run in the top of your Firefox browser window. On a Mac, your toolbar appears at the top of your computer screen, to the right of the Apple symbol. Mozilla Firefox support site notes that you can also access your download list by pressing the buttons 'Command' and 'J '.
3In the drop-down menu, select 'downloads '. Now, your download list will appear on your screen. If you have not downloaded everything, your download list will be empty. Otherwise, all your items downloaded to your most recent Firefox session will appear in the list.
Read more: how to find my list download on Mozilla Firefox | eHow.com http://www.ehow.com/how_5900051_download-list-mozilla-firefox.html#ixzz1lHe1oY2A
-
downloads window appearance has changed - how do I restore?
Download window works OK when in full screen but when in a minimized window, the appearance has changed, so it is impossible to read what is there. How can I restore it to original settings?
You have any addons/extensions that can style it somehow? Go in Addons > Extensions (and appearance), and watch well everything that can change the window display mode. Change the options accordingly.
-
I downloaded Windows Server 2012 and don't remember my password.
I WENT TO MIRCROSOFT.COM OR TECHNET AND DOWNLOADED WINDOWS SERVER 2012
AFTER MAKING A PASSWORD FOR WINDOWS SERVER 2012 WHY WOULD TAKE ME TO THE COMMAND PROMPT
AND I DON'T CHARATER UPPERCASE LOWERCASE AND SOME HAVE BEEN USED IN MY PASSWORD
THEN, AFTER THE COMMAND PROMPT, I HAD TO RE INSTALL WINDOWS7 BACK BECAUSE I DON'T HAVE
WHAT MAKE OF THIER MY GUESS IS DONE I HAFT TO TYPE SOME SORT OF COMMAND
I JUST WONTED TO SEE WHAT WINDOWS SERVER 2012 RESEMBLED
WAS THE ONLY REASION WHY I USUAL TO DOWNLOADED
IM NEW TO THE SITE AS WELL AND I WAS HOPEING YOU COULD YOU PLEASE E MAIL ME WITH
THE REASON FOR THE ANSWER I DON'T KNOW WHERE TO GO TO GET MY ANSWER IF IT WAS GOING TO BE PUBLISHED
ON THE WEBSITE IT SELF INSTEAD AND YOU ALL DON'T RE NOT PLAYING PEOPLE BY
SO here IS MY EMAIL ADDRESS * E-mail address is removed from the privacy *
Hello mimi azzedine,.
I suggest posting your question on our TechNet forums located here: -
I just tried in vain to download Windows Service Pack 2
I just got this error message after trying to download Windows Vista Service Pack 2.
Installation has failed
The parameter is incorrect
Error: ERROR_INVALID_PARAMETER (0 x 80070057)
How can overcome the Please this problem? Thank you
Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.
[You may want to print these instructions for reference offline. If a step said to reboot, reboot.]
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).
4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.
NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!
5. right click on the file that you saved in step # 1 above and select run as administrator. DO TAP not your keyboard until the race ends, then restart.
5. right-click on the file that you saved in step # 1 b above, and then select run as administrator. DO TAP not your keyboard until the race ends, then restart.
6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN
NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.
7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.
9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]
10. restart a last time & test.
===================================
Free unlimited installation and compatibility support is available for issues related to Windows Vista Service Packs. Availability of support chat or messaging differs depending on your location. Some questions may require more support for which it has advanced a charge: http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034
~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Code800F900 'unknown error in windows update' trying to download windows vista service pack 2
try to download windows vista service pack 2. Last update was on May 21, 2010. For a few weeks or months, the computer can be terribly slow. Often a hard drive rattle sound. For this, I tried anti-spyware, last week I installed and ran AdAware from lavasoft. It found nothing except two small cookies. A few weeks earlier, I had done the same thing using windows Defender. Also nothing. Along with a check disk hard I did not find much either. What end of the lifecycle for this computer, now about 3 years? He was one of the first available vista computers. Thank you for your help, Peter
* Original title * Code800F900 'unknown error in windows update', try to download windows vista service pack 2__I have an oem version purchased with HP model s7720.nl
Why did you delete your post where you said that Norton application has been installed at some point in the past?
There is nothing wrong with the guarantee of these forums, but I'd be willing to bet that there is something VERY wrong with the security of your computer!
Let's cut to the Chase. See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxTip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspxMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Computer crashes when I try to download Windows updates.
Whenever I try to download Windows updates, everything freezes and I can't do anything but kill switch and restart. Also occurs when the awakening of the mode standby.
Hi Steinweg88,
Please post on the answers.microsoft.com forum.
I want to refer to this forum thread, because my first thought is the first action taken in this regard is to run a SFC Scan, here is the link:
Please keep us informed for the purpose this to get help.
Debbie
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Problem after trying to download Windows 10 on new E1 572
My new 572 E1 (Core i7-4500U / Windows 8.1) stop at the end of an attempt to download Windows 10. Now when I press the Start button nothing happens. What can I do?
Thank you for taking the time to respond to my call for help. I'm afraid I have to come clean and admit what has caused the problem. I bought my new computer online since the France because I needed to have a French AZERTY keyboard. I plugged with a France adapter UK and, after the initial installation, goes to download Windows 10. As I did not know that the download can take some I've done other things at the same time and did not download concentrate fully on. To make a long story short, after a lot of testing, some trial and error, I found that the France to the UK adapter I was using was wrong and that, therefore, the attempt to download fully drained battery. After changing the maps, I was able to fully recharge the battery, and now everything seems to be OK. I hope my experience can help other members of the forum. Thanks again.
-
Is it possible to download Windows XP and install it on a built-in operating system?
WINDOWS XP / HOME EDITION / 2002 EDITION / SERVICE PACK 3 Version 5.1.2600 Service Pack 3 Build 2600
QUESTION: Is it possible to download Windows XP and install it on a built-in operating system?A representative of Microsoft Support helped me download a TORRENT (Microsoft.Windows.XP.SP3.Professional.March.2011.6230196.TPB.torrent) file so I could burn Windows XP Service Pack 3 on a CD and do a clean install on my machine.I burned the operating system on the CD, but when I went to install on my machine, I loaded it in the CD ROM and I clicked on the compatibility of the systems of control and then I clicked on check my system automatically, then the window of Microsoft Windows Update Advisor popped up and there are 2 options (Option 1) Yes Download the updated installation files (recommended) up-to-date, I clicked on next, a window popped up saying that she was performing dynamic update, then a small window pops up that says, heel loader for WINNT32 setup - warning is from safety (name: ident.cab) and an unknown Publisher, I clicked on run and Microsoft Windows Upgrade Advisor had a message that says the following items are not compatible with Windows XP, if you continue, you will not be able to use these items, even after the installation is complete. (Windows Power Shell (TM) 1.0). When I click on details, I got this message... Installation of Microsoft Windows XP Service Pack 3 has been cancelled because XP SP3 cannot be installed on Windows PowerShell (TM) 1.0. Before you continue, you must uninstall Windows PowerShell (TM) 1.0. For more information http://support.microsoft.com/kb/926139I contacted a different Microsoft Support representative (because that I treated initially was not available), and he told me that the Windows XP operating system on my machine was built.You have a solution to my problem? Thanks in advance for your answer.Windows XP is no longer available. You will need to purchase a 'Full Version' edition of Windows 7 and install it. Windows 7 to be purchased from the Microsoft Store.
Maybe you are looking for
-
I want to get the update or cancel button on my toolbar. I used the toolbar customization notes and followed the steps but I have no idea where the real new toolbar is to use. could you please help me?
-
I had to change my Apple ID due to fraudulent charges but my iPhone 6s 9.2 still has the old Apple ID and will not accept old or new passwords. How can I update the iPhone 6s 9.2 with the new Apple ID and password? I tried to perform a complete reset
-
Given this XML structure. text 1 text 2 text 3 How I would write an xpath statement to return the cmd attribute for a single element of found? For example, if the text 2 is found then return 'b'... If text 1 is found then return 'a'... you get the id
-
Windows 7 MSDT passkey problem
My wife bought a disc of Windows 7 Ultimate Upgrade from his employer (a University) in their common license terms. The Center tech support gave instructions with the disk that says, "you will get the error 0xC004F061", and I did. Their instructions
-
Call for different applications
Hello I have 5 applications that I installed on the device. I want to call an application via the my request another. How it is possible. second thing is: How can I check whether or not the request is intalled. If this isn't the case, then I want to