Publish everything by downloading the Patch 17767877 - Adaptive case management

Similar Questions

• not able to download the patches in VMware Update Manager

  Just have a VMware Update Manager 4 installed, but he has been unable to download the patches. I already have the network team open up our proxy on port 80/443 to allow this server to connect to. * VMware.com, *. Shavlik.com, and *. . Microsoft.com server, I have no problem with IE navigation on these three sites. Test the connection still doesn't work proxy is still not allowing ICMP ping packets.

  When I checked the log of Update Manager, I found the following messages. Anyone know what could cause this? Thanks in advance.

  Error 12007 WinHttpSendRequest for url https://hostupdate.VMware.com/software/VUM/production/index.XML

  Download https://hostupdate.VMware.com/software/VUM/production/index.XML failed, err: error 12007 WinHttpSendRequest for url https://hostupdate.VMware.com/software/VUM/production/index.XML

  Download retry limit reached

  Download job execution throws error: download limit of retry reached download failed for url: https://hostupdate.vmware.com/software/VUM/PRODUCTION/index.xml download job finished, bytes downloaded = 0; notify all

  Download job Finish removal download job in queue

  Current download count: 0

  Download file error, retring: download files: https://hostupdate.VMware.com/software/VUM/production/index.XML failed, 0 bytes downloaded.

  HttpDownloadFile: url = https://hostupdate.VMware.com/software/VUM/production/index.XML destPath = C:\DOCUME1\LOCALS~1\Temp\vcibswxiyrp.tmp_1\SV-VCA

  BZ

  Maybe this will help you?

  http://KB.VMware.com/kb/1012926

• Publish everything by downloading the information in pdf book

  Hi all

  I get following error down load briefing in PDF.   MHTML works very well.

  A fatal error occurred during the processing of the request. The server responded with: the system cannot find the path specified.

  Error details

  Error codes: AGEGTYVF

  Geographical area: saw.rpc.mis.read, saw.subsystems.remotesubsystemimpl.downloadbookpdf, saw.subsystems.remotesubsystemimpl.downloadbriefingbook, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool, saw.threadpool, saw.threads
  the pointers will be of great help.

  Hi Bianca,.

  Thanks for your reply.  I tried access above metlink, he is asked to provide support identifier.  Is there a way I can get the direct link to this DOC ID

• Downloaded the patch for an extension of game / will not work because windows cannot find ' RTR - patcher.bat

  Downloaded the patch for an extension of game / will not work because windows cannot find ' RTR - patcher.bat

  Original title: rtr - patcher.bat

  Brian

  You need to contact the developer of the game, because they are the only one who can help you.  We support Microsoft software & hardware here.

• Download the patches and the stage manually in the Update Manager?

  I need to perform an orchestrated to ESXi upgrade using Update Manager, however, my server vcenter and client computer for Update Manager are on isolated network segments that are not allowed on the internet. How can I download the patches and their step manually in the Update Manager? That is to say, I want to download the patches from a computer that has internet connectivity and then upload to Update Manager.

  Please help!

  Thank you very much.

  You can use the Update Manager download service to download your updates and copy at VUM in isolate network,

  Following the documentation and the Ko with description for this case:

  DOC:

  VMware vSphere 5.1

  Ko

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1004455

  Kind regards

  Joao castro

• ESXi 5.0 to 5.1 manually download the patch?

  I'm sorry, this is a silly question.  I would like to use the Update Manager to update my hosts esxi 5.0 to 5.1 c (latest patch), but I'm in a situation where I need to download the patches manually.  I can't understand a patch that I should download the 5.0 to 5.1 initial update.  Again, I know it's probably look me right in the face

  ESXi510-201310001?

  ESXi510-201307001?

  Update - de - esxi5.1 - 5.1_update01?

  
  

  
  

  No doubt a document that explains, but I can't for the life of me find.
  

  For the initial of v5.0, v5.1 upgrade, you need to download the last install ESXi 5.1 .iso image in the Update Manager and create an upgrade of base "host. To apply the latest patches, you can create a patch with the latest batch of patches and helps to patch the previously set hosts to level.

  André

• I just buy the creative suite CS5.5 and I can't use the folio I downloaded the patch and it wants me to sign and he comes back with an error

  I just buy the creative suite CS5.5 and I can't use the folio Builder I downloaded the patch and it wants me to sign and he comes back with an error it says may - failed to connect - network Failure.How I go beyond this

  Please and thank you

  CS5.5 does not require a login, so there must be something else requiring that you.  Maybe it's the security of your system requires you to login to allow installation.

• Download the patches 9.2.0.8 group

  Hi guru,.
  I would like to upgrade our 9.2.0.2 oracle database to oracle 9.2.0.8.
  Can you please tell me where to download the patches for her group.
  I tried matalink but I'm ranked. Help, please.
  Thank you
  Jonathan

  Hi, Jonathan;

  Its available on metalink. The patch number is:
  4547809

  Respect of
  HELIOS

• How to download the patch

  Hi hussein/helios,
  
  It's really weird download this patch from metalink. I don't see the download button.
  I download the Patch: 1868508
  It list me all the patches with this number and platform of languages (for example Turish, Trad Chinese,... etc.)
  all languages have the same size it w/c is 66.4 kb. I want to download the generic platform (American English)
  Located inside modified with size 169.4. When I click it will not match the pages of information on the screen and there is no
  toolbar to move to the right more margin. I can't locate the button to lower the load. This happened to you too?
  
  Help, please...
  
  Thank you
  
  MsK

  Hi yxes;

  Thank you, hellboy :)... I see it now... .the check box is not displayed when the mouse cursor is not positioned on it... that's why I got crazy where to download... I accidentally moved the cursor to the left more and the box showed... lol

  Its nice to hear the problem solved ;) If possible please change the status of issue response to prevent wasting time which is already solved. Thank you for your understanding

  Respect of
  HELIOS

• Question to download the Patch

  DB version: 11.2.0.2.3
  Version of the OS: AIX 6.1
  
  We had met the following bug.
  
  + Bug 13377816 -Excessive use of memory by DIAG / DIA0 [13377816.8 ID] +.
  So we need to apply the patch 13377816
  
  I was looking in Metalink 13377816 for the platform "IBM AIX on POWER Systems (64-bit)"
  
  For the Group of 11.2.0.2 patch, the download is available only for power supply 11.2.0.2.4 and 11.2.0.2.5. But my diet is 11.2.0.2 * 3 * that the patch is not available for download for this power supply. While we should download and apply?
  
  Published by: T.Boyd on May 15, 2012 08:53

  You will probably need to apply a 11.2.0.2.4 or 11.2.0.2.5 power supply, then apply this patch installed on top

  HTH
  Srini

• Download the patch...

  Hello
  I have a few basic questions about the needs of patch download...
  I will give an example...
  Patch: 2864765 which is published to multiple platforms and multiple languages.
  
  In my case, the Linux operating system x 86 for two lanuages installed - english (as base) and Croatian, how often should I download this patch...?
  3 times? Two for all installed languages and one chosen operating system like Linux x 86 platform (from the list the title "platform or language")?
  And if I choose Linux x 86 for which language is it?
  If the answer to my first question is 3 which is about to install? I know with certainty that the patch in the base language must be installed before others.
  
  Note: I use EBS 11.5.10
  Thank you
  SIM

  SIM,

  In my case, the Linux operating system x 86 for two lanuages installed - english (as base) and Croatian, how often should I download this patch...?

  You need to download two patches:

  (1) English - select your operating system
  (2) Croatian

  -Connect with Metalink
  -Click on the tab «Patches & Updates»
  -Enter the number of Patch: 2864765
  -Under "Platform or Language", select "Linux x 86"--> this will return the US patch (Patch 2864765, T2K Advanced utilities Rollup A - size: 54 M (57011555 bytes))
  -Change "platform or language" to "Croatian"--> this will return the NLS patch (Patch 2864765 --(* RH *), advanced utilities Rollup A T2K - size: 4.7 M (4887144 bytes))

  If the answer to my first question is 3 which is about to install?

  You can ignore what you two (not three).

  I know with certainty that the patch in the base language must be installed before others.

  Fix.

  Kind regards
  Hussein

• Unable to kenza link to download the Patch MS02-061 for SQL Server 2000

  original title: can not download Patch MS02-061

  Hello

  I know this is an old patch but our new VPN software was listed as a patch that is required if SQL Server 2000 is installed.  I get out the site and I am unable to download.  Telling me that it can't find it when I click on the link:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;316333&SD=Tech

  It is on the page: http://www.microsoft.com/technet/security/bulletin/ms02-061.mspx

  This is supposed to be the patch that replaces MS02-039.

  Thank you!
  Ryan

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  You will find appropriate support for SQL Server in this forum: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads

• My Windows 7 Upgrade is still stuck at 62%, even after downloading the patch Microsoft Fix It several times.

  I tried several times to upgrade to Windows 7 Windows Vista Home Premium. It goes through all the steps, but at the last stage, at 62 he gets stuck, then stops, restarts and said then the upgrade has failed and that Windows Vista will be restored.
  I found several sites that give a link to a Microsoft Fix It tool that should take care of this problem. I downloaded this patch Fix It, but the upgrade is still stuck at 62%. What can I do on this please?

  If possible, try to do a restore of Windows Vista and try the following:

  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.

  Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7 try the upgrade again

  Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• XLS-models with BI Publisher using and download the reports with APEX

  Hello

  I already create PDF reports with RTF Templates. In the APEX, I create a button and a process of "Download" to get the PDF-reports the BI Publisher. ". We use version 11.1.7.

  Now I try the same thing with XLS-Templates. I create the XLS model in the editor of BI and where it works very well. Now I need also an APEX-"Download" - Process to download the XLS reports to the client. The method already used doesn't work for RTF models.

  Kind regards

  Mark

  Hello

  I found here, the format has value "excel", not "xls"!

  http://docs.Oracle.com/CD/E28280_01/doc.1111/e26693/ibr_config.htm#WCCAA2062

  Now it works like a charm!

  Kind regards

  Mark

• Update Manager fails to download the patches

  Hello Experts,

  I have vCenter 5.5 running on win2008r2 and Update Manager (VUM) installed on the same vcenter. I have deployed UMDS (Download Manager Update service) to download patches. UMDS is installed on a different server. Under Download Manager update view Admin tab option, I gave the url path web https UMD patches like "shared repository. I added following links via UMD as a download URL command line: -.

  https://hostupdate.VMware.com/software/VUM/production/main/VMW

  -deposit - index.xml

  https://hostupdate.vmware.com/software/VUM/PRODUCTION/csco-mai

  csco/n-deposit - index.xml

  http://vibsdepot.HP.com/HPQ/mar2014-550/index-drv.XML

  Patches have been downloaded by UMDS I can see in download store path, joined screenshot in one of the comments below. But I don't see a single patch on patch repository tab of the Update Manager. It shows the Virgin.

  Do you know what could be the cause?

  Thank you

  so the culprit was the inheritance of the permissions on the patch store, followed this article and it worked.

  VMware KB: Configure Apache or IIS Web server as a source patch for vCenter Update Manager