Pulling hair, Center solutions HP, cannot start, impossible to check ink levels (no Toolbox)

Similar Questions

• HP Deskjet 1510: Impossible to check ink levels.

  Hello

  OK, so I'm sure that some time ago I had assistant HP printer installed on my computer with all this work well until around may, but, and I don't know why because I don't really use the printer during the 3 months that follow, when I went to check my ink levels last week, I had no installed printer wizard which I thought was weird so I decided to reinstall everything and when I had just uninstalled my printer and restarted my pc, he decided to update windows 10 or something... so I only installed the drivers of printer and today and when I went to check on the wizard of the printer ink levels I could not find the function of any where... I was looking through some difficulties other people had , and I have heard that some printers do not have this feature available because of their type of printer, so this is my case? or I did something wrong on my installation? because I'm sure I got this role until may so it makes no sense really does not have now...

  Any help would be helpful, thanks.

  Hello

  So I don't know why, but when I clicked on 'Maintain your printer', try to print a test page and see how my ink level have been made since I saw not the estimate, with the estimated ink levels tab was fully functional and the icon of the top for the estimated ink levels tab appeared... so it turns that the problem be corrected himself or I don't see not ink levels until I click on "Maintaining your printer" which I didn't... anyway the problem is now resolved, so I am sorry for the trouble and thank you for trying to help

• Impossible to check ink levels HP 4500 G510n-z

  I had received messages that my ink level was low.  I replaced the cartridges, but the printer never aligned with them.  Now, I can print but the impression is very low.  Help, please.

  Hello LoveJRand welcome to the Forums of HP, I hope you enjoy your experience!

  I see you run into problems with your print output.  I would like to help with that today!

  I recommend you to perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend the steps described in this document on troubleshooting problems of quality Print.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Impossible to check ink levels

  I have uninstalled, reinstalled, installed the patch... toolbox folder is in the folder, but it does not install or open.  I have nothing but the three... See what print, customize, and set preferences.  through the control panel in the file does not work.

  How to align a new cartridge if there is no way to see it?

  Windows 7 usb or network nothing.  Printer works.

  Hi jihjelli,

  I have provided information on how to check the ink and execution of alignment levels.

  This information is provided in this document.

  The streaks of ink fixing, faded prints and other common print quality problems.

  You can check the ink levels estimated from the control panel of the printer.

  On the Control Panel, press the Setup () button.

• Vista 64 bit security Assur. Norton Center not running, cannot start

  cannot install the update or view the history, retore Center not available, I try the update says the system doesn't work not, vista 64 bit, security internet norton 2011, adaware free internet security.thankyou

  Hello

  System Restore is not available due to Norton

  Norton and Norton product Tamper Protection

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  ________________________________________________________________

  also search for malware;

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _________________________________________________________

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Error 1068: Task Scheduler cannot start, impossible defragmentation

  I tried to defrag my sister's computer and ran into a problem.  Defragmentation wouldn't because Task Scheduler would not start.  Long story short: operating system Windows 7.  My attempts to solve the problem, there are messages that I continued to receive:

  "Windows would not start the Scheduler Service on the Local computer.

  and

  "ERROR 1068: the dependency service or group could start."

  Please, I need help.  Any ideas?  Do you need more information?

  Thank you in advance,

  Laura

  Hi Laura,

  Open windows control panel, open administrative tools, and then open Services.  First check both of these services.

  Remote procedure (RPC) call  This service should show started and startup type must be automatic.

  Windows event log                    This service should show started and startup type must be automatic.

  If you need to change the settings of the two services above, right-click on the service and select Properties.  Select Automatic from the drop-down list and click on apply.  Once finished, click on the Start button to see if the service starts successfully.

  
  

  Task Scheduler                            This service should show started and startup type must be automatic.

  If you have made changes, see if the disk defragmentation utility will now work.

  Let me know if this does not help the issue.

  Kind regards

  DP - K

• Cannot start video rendering, check that you have an installation valid directx

  I use Skype and that you cannot use the video due to the above error message

  First of all, update X.get Direct to: http://www.microsoft.com/downloads/en/resultsForCategory.aspx?displaylang=en&categoryId=2&stype=n_dc

  Re start the pc after installation. If problems persist after, go to run, type: DXDIAG

  Run the tests of Direct X.

• Impossible to check the level of ink HP Deskjet 3050 J610

  I'm unable to check the ink level. When I go to:

  Control Panel\Hardware and Sound\Devices and Printers\HP Deskjet 3050 J610 series

  I get only 'see what's printing","Set preferences"and"customize your printer.

  

  How can I solve this problem?

  When I bought it. I installed all the software from the CD and that's all, but for some reason any here is no more.

  Operating system is Win7 64 bit

  When I run CD > add more software "already installed" read here at the end.

  I uninstalled HP Deskjet 3050 J610 series and then I reinstalled the CD software.

  When I uninstalled it, I got error:

  Warning of 1910. Could not remove shortcut HP Deskjet 3050 J610 series Scan.Ink. Verify that the shortcut file exists and that you can access.

  And after that I reinstalled the software and now it works.

  I'm crazy enough to forget that I had the CD and I could do it.

  Thanks for help.

• Cannot start workstation 7.0

  Hello

  My OS is 5.4 Server RedHat, I uninstalled workstation 5.5 and installed 7.0.

  When I start workstation 7.0, it says "cannot start service". Check the setting of the details of the error.

  What can I do?

  Thank you.

  Hello!

  Try to do it the linux console:

  VMware-modconfig - console - install-all

  You must have linux-headers package in your system.

  The beta of VMware team

  VCP 3 & 4, MCP, IBM CSE BC.

• I keep getting a request to insert the disc from center of solutions to the start - I cannot locate disc - how can I replace? thanks__

  I cannot locate the windows solution Center disk and cannot find how to get the replacement for vista

  http://h30434.www3.HP.com/PSG/board/message?board.ID=general&message.ID=65

  http://h30434.www3.HP.com/PSG/board/message?board.ID=OSandSW&message.ID=10968

  Read the info on the on the link about your problem of HP software, not Vista.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  Above is the contact HP link help you, if info to these links don't solve the problem for you...

  See you soon.

  Mick Murphy - Microsoft partner

• HP Photosmart B209a All-n-One: Center solutions HP don't start/charge

  Recently upgraded from Windows 7 to Windows 10. At this point, I checked HP updated the software and the driver. Finished downloading new/upgrade to full version of the software for my printer. Printer seems to work very well. the only glitch that I now seem to have is the use of HPSolution Center, which works well with Windows 7 won't even start using Windows 10. When I try to start the utility it just flashes on the screen for one then slipped, but will launch/not not start. I checked under properties/compatibility and the only option is Windows 7. Anyone else had or having this problem? Someone knows how to solve this problem. Any help or ideas would be appreciated.

  Hello

  Thank you for using the forum.

  You can find the solution here:

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/HP-Solution-Center-fails-to-launch-cannot-...

  Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!

  Windows 10 - How to uninstall & hide updates

  https://goo.GL/3tWxyA

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• Windows Media Center Gets error: invalid Application - cannot start

  Windows Media Center (of the month last Vista 32-Bit)

  I have problems to make internet TV, news and Netflix to connect to the internet when you use Windows Media Center.  They are all under the TV + movies option during the WMC.  I get an error saying [invalid Application - cannot start "" ""].  Not sure if this is because the internet connection that I use is not one that has a user name or password.  Not know how to configure it for this version of Windows.  I don't get this problem when you use Windows Media Center in Windows 7.

  At the opening of Windows Media Center I get the following message: INVALID APPLICATION; "Unable to launch SymAddin; and a checkbox to disable this Application (I have not checked the box).
  http://social.answers.Microsoft.com/forums/en/vistapictures/thread/ea536e68-5903-444C-8d10-6bd9fa936dc9

  "Invalid application-unable to launch" Windows Media Center - MSNBC.com
  http://social.answers.Microsoft.com/forums/en/vistaprograms/thread/18c69d9b-e93d-4350-A17C-15ef9ae7d76f

  "Has anyone, using windows vista ultimate media center, was a 'failed to launch'"demand invalid." »
  http://Askville.Amazon.com/Windows-Vista-Ultimate-Media-Center-unable-launch-invalid-application/AnswerViewer.do?RequestId=2894719

  I guess that set up WMC is identical in both Vista and Windows 7?
  http://www.Microsoft.com/Australia/Windows/Windows-Media-Center/

  Your firewall is blocking access to the WMC?

• This device cannot start. (Code 10) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Map #2 Microsoft Tun Miniport
  This device cannot start. (Code 10)  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
  ???

  Hi AnaSk,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows.

  Download and install the latest drivers from the computer's network adapter or the website of the manufacturer of the device.

  See the article below

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

• When you try to activate Windows Security Center, receive error message "cannot start Windows Security Center.

  try to open soundcards Security Center declined as I click to put on there is one message the servicem of windows Security Center cannot start...

  * original title - disable windows security center service .How can I makr turn on please *.

  Hi tsedeyasefa,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Security-Center-service-cant-be-started/49277301-85c2-4B13-9f71-1bd08e4688a0

  I hope this helps!

• Error: 0 x 80070424 "cannot start the Windows Security Center service" when you try to start the Windows Security Center Service.

  original title: Error Code 0 x 80070424 on the Windows Firewall settings

  I can't turn on my Security Center Windows Service, when I try to turn it on it displays "cannot start service Security Center Windows"

  Then when I go to my firewall settings, it says "Windows Firewall don't use recommended settings to help protect your computer" I click "Use recommended settings" but it displays "Windows Firewall cannot change some of your settings 0 x 80070424 error code" how to fix this?

  Hello

  Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

  This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

  Download the two files from the registry

  http://download.bleepingcomputer.com/win-services/7/Mpssvc.reg

  The base filtering engine

  http://download.bleepingcomputer.com/win-services/7/BFE.reg

  Run them and click YES when you receive a UAC prompt

  Restart your PC

  Press Windows key + R and type

  regedit , and then click ok

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  Right click on it -permissions

  Click ADD and type

  Everyone, and then click ok

  Now click on all

  Below, you have the permission for users

  Select full control, and then click ok

  Press Windows key + R and type

  services.msc , and then click ok

  Start the service database and then filtering engine service windows firewall

  If you still get this error

  Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

  Download and launch this key

  Shared access

  Click YES when you receive a UAC prompt

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

  Right-click on -permissions

  Click Add and type

  Select full control and everyone

  You should be able to start right now the firewall

  You can also Miss defender of windows security center, BITS and windows update services

  Download

  Security Center service

  http://download.bleepingcomputer.com/win-services/7/wscsvc.reg

  Windows Defender

  http://download.bleepingcomputer.com/win-services/7/WinDefend.reg

  BITS

  http://download.bleepingcomputer.com/win-services/7/bits.reg

  Windows Update

  http://download.bleepingcomputer.com/win-services/7/wuauserv.reg

  Run them and click YES when you receive a quick restart, UAC the PC
  

  
  

  Good luck

  * Edit *.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...