Purple problem

Similar Questions

• Microsoft-new Xbox360-problem display of purple and green it is defective?

  I just bought a new xbox360 for Christmas and since the purchase, he showed color display only green and purple. Once when playing adventures with the kinect, all entered colors automatically, but it has not changed and when to use again another day it was back to the purple and green screen.  Not happy at all, the console was very expensive and should work fine.

  Woulds appreciate your advice or any information where I can get help for this problem thank you.

  Hello

  It seems that the cables may need to be plugged in all the way.  In addition, please make sure that the colors are adapting successfully.  Connect it to another TV.  If you still encounter problems with the console, I suggest to go back to the location that you bought.  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I use lightroom six. My problem is some of my photos have several purple lines across them and can find a way to get rid of the.  The camera I use is a fujifilm X100T.  I tried different software and the problem is not there.  so I Don t

  Some of my photos have a purple line which passes through.  I use Lightroom six, but had the same problem with the previous version.  I tried different software and do not have the same problem, so I don't think that the problem is with the camera.  The camera is a Fujifilm X100T.  Any idea?

  Purple lines on the photo almost always indicate that some piece of hardware caused a corruption of file. It could be any piece of equipment in the transmission of the record of the caard of the camera to the computer. One obvious thing you can try is to move the photos to the computer via a USB drive / different to different cards. If possible, you can try to copy the photos to a different computer and then import into Lightroom. Run diagnostics on your hard disc controls and the memory of the computer.

  Other software may display the file does not cuorruption, but it is usually display the preview JPG that is embedded in the RAW file, and this JPG preview is very often very well when the image RAW itself is corrupt. So the fact that else sofrtware shows not only the problem is irrelevant.

• My link colors are always purple when it's on the net. No matter what method I use to change the color, they appear always purple. What is my problem and can it be corrected?

  My link colors appear always purple when it's on the net. No matter what I do to change the color, they appear always purple. What is the problem and is there a method to correct?

  Looks like you're leaving the: visited the default color.

  Add in some css to reset the: visited to what you want...

  a: visited {}

  Color: #000000;

  }

  In addition, make sure that your link pseudo classes go in order following in your css...

  a: link

  a: visited

  a: hover

  a: active

  If this isn't the issue, we'll need to see your page to help you, could you post a link?

• We recently had to reinstall the operating system on our computer, now, there is purple dots on our screen. Is this a problem computer or a monitor problem?

  We have a Dell Dimension E521and Dell monitor using NVIDIA drivers.

  Hello

  I suggest to update your graphics driver using Windows Update or download the driver for the Dell Web or NVIDIA site.

  This problem may be due to graphics driver or overheating.

  I hope this helps.

• Problem with a purple item

  I have a server with purple point and I do not change that color.

  can anyone help

  No, you must enable ActivateLog with GUI configuration editor. A BB. LOG file will be generated in folder or %tmp%. Do a search to find

  Make sure you start and stop the client.

• ESXi 5.5 build 1623387 PROBLEM (purple form)

  Hello

  We have 585 DL HP G7 Server wiith 320 GB RAM (RAM recently updated)

  I found today offline, with all VM server down. When I went to the server room, I found this on the server monitor.

  After restarting the server works OK, but I don't know is this problem will repeat itself. Does anyone have an idea what causes this error?

  

  The nx_nic_poll_sts of error stacks refers perhaps to the card nic NetXen. Could you check and confirm if the NetXen nic hardware driver and firmware are up to date?. Contact Hp to run a diagnostic on the material. Let me know if any door

• A purple screen of death (.. .exception 14 to the world...) with Vsphere 5.5 and Windows 2012R2 Server (problem solved)

  Hello

  I think it is good to add here...

  I started now to migrate my server under Windows Server R2 2012. The virtual environment is vSphere 5.5 HP DL380G7 servers.

  Today, I have solved a hard crash of the host server after you have added a server Win2012R2. The symptoms are CMTF (purple screen of death) to the host (I was pleased that I have disabled the new customer HA; that would be a blow my other hosts).

  Basic message was "...". exception 14 worldwide xxxx... ».

  I solved it very simple by changing the E1000 to VMXNET3 virtual network card. For me, it looks like a bug to develop by VMware in the next versions. For now it works.

  I hope this information helps you!

  Good luck!

  See this article.

  VMware KB: ESXi 5.x host undergoes a purple diagnosis with errors E1000PollRxRing and E1000DevRx screen

  Frank

• Big problems with blue and purple areas in pictures... Help?

  Hi all

  I recently upgraded (?) to CS6, and I see some really weird stuff in Lightroom. Any help would be much appreciated!

  Here's the gist of it: I was hired to film an event in a church, and in all the images that have areas of blue or purple, the colors are misinterpreted in Lightroom and Bridge. Check the attached pictures to see what I mean. The images seem fine at first, but as soon as Lightroom loads fully, all areas of blue or purple turned bright blue, primary. I thought it might be just a mistake of rendering in Lightroom, but if I export a JPEG, it's the same thing with the weird blue areas. I am really puzzled.

  In the first picture, you can see an image takes over, with the good purple gradent behind the band. In the second, Lightroom has decided that the area should be displayed as a primary blue uniform. In the third picture you can see the thumbnails at the bottom, with decorations on the stage displayed correctly. The fourth table a few seconds later, after Lightroom has worked it's magic on each of them. On an unrelated note, expression of the first worship service is really funny in the third and fourth images.

  Again, I would be extremely grateful for any help. Data sheet:

  10.8.2 OSX

  Camera Raw 7.3

  4.3 Lightroom

  Bridge 5.0.2.4

  Canon 7 d, 60 d

  See you soon,.

  Paul Bryant

  

  You have selected what camera profile in Lightroom and Camera RAW?  Purple is a color that is difficult to reproduce accurately.  I suggest that you go to the camera calibration tab and select the same camera profile you selected in the camera.  If you have not changed the brightness of default camera of Lightroom and ACR is Adobe Standard.

  The initial view, you see comes from jpg format in the RAW file, which is replaced by what Lightroom and ACR make the profile of the selected camera.

• Purple link problem

  It seems that even if I put my visited links and all links to gray, when he appears live on the web, they appear to be purple. Has anyone see or know what that means? Thank you.

  Sheesh.  Nope.  Dang.    OK-

  This is the CSS on the page - that's all there is.

  The purple color you see is the result of ignoring one: State visit of the binding.  It is purple because it's a link that you have visited during your current browsing session.  Use instead - this CSS on the page

  Now you have all your bases covered.  The 'rule' all specified LINKS regardless of the State.  The: hover rules said "with the exception of that State".  See what's happening.

• I recently had a problem adding still png or jpg graphics - looks like that it is not synchronized and gives purple and green grounds.

  When you add a graphic to my FCPX video in the form of png or jpg or tiff, it looks like it does not synchronize according to the pic

  Maybe your graphics card struggled to display an image of grand res. What model is your Mac?

  Try to resize an image for something as small as a test. Preview can do the downsizing, or if you have an image editor like Photoshop...

  Russ

• Purple tint in Adobe product - no problem of calibration

  Take a look at the attached picture - on the left is a photo black and white I exported out of photoshop after desaturation but open in the viewer transform into image.  On the right is the same picture seen in photoshop - once again after desatuation to convert to black and white.  My monitor is calibrated and photos open in the image viewer or other programs simple appearance correct - but in lightroom or photoshop, they're a shade.

  How can I remove this?

  

  I received the new Spyder and calibrated.  All is now well and the color is gone.

  It seems that my old Xrite having no win8 software work properly in an environment of win8 - or somehome have become defective.

  Thanks for the help

• purple line under the finder icon

  

  Can someone tell me what the purple line is under my finder icon? I did some research and looked and can not find an answer.

  MacBook Pro 13 "early 2011

  16 GB memory

  OS version 10.11.16

  Thanks much for any help you can give me!

  Christelle

  I suspect it is a problem of Dock. Try to restart the dock through the terminal.app

  copy and paste:

  Killall Dock

• PowerBook G4 aluminum screen rendering problems

  Hello. I use an old PowerBook G4 aluminum 15 " only for some older programs that I still have, the specs are 1.33 GHz, 1 GB DDR SDRAM, an A1095 model (I think). It is currently running OS 10.4.11 Tiger.

  I am having some problems with the rendering of images, windows and icons on the screen. Sometimes, say if there is a background image, there will be pixels of a pure purple and light green color and other parts of these colors in pants plates, which will fade in-and-out in intensity. There will be a purple halo around the icons on the desktop, windows will have their underlined by violet title bar and the window itself will be celebrating also in purple. When I move these icons and windows, the outline of color moves with him - even for images with these pants patches. If I try to take a screenshot, it looks like it has taken to this effect, but when the screen goes back to normal, the images do not show fading.

  There is also a kind of shear horizontal wind that comes and goes, like a Photoshop effect, which seems to affect the whole screen - but it was did not so lately, moreso just the pants colors. The effect of shear wind or rosacea are affected by the position of the screen.

  These are intermittent problems that come and go, sometimes they may not arrive for a few hours or a few days, and sometimes they keep coming back and to stay - they also vary in intensity, sometimes just annoying, other times made the screen so bad that I have to do a hard shutdown with the power button.

  I have connected this laptop to a LED TV (via a HDMI DVI cable) when I had these patches scrambled on the computer laptop screen - and the TV screen shows very well, without tasks.

  After asking some Apple technicians, they thought it could be anything from:

  -l' screen is gone - but why would move fading when I move the images/icons/windows?

  -a bad laptop screen cable

  -video card - but she restores the fine screen image when connected to a TV?

  -memory on the logic board

  -poorly seated RAM (which I've deleted and reinstalled several times with the same results)

  Or a combination of these. They say this isn't a problem with HD.

  I understand that it is an old computer and an old technology, but I would still go back to normal, as everything else works fine. I know a guy who can replace the screen and the cable, as it seems a little tricky for me to do would not touch the video card. I'm wary about this fact, because it may be other things that causes this problem.

  In addition, the graphics card is an ATI Mobility Radeon 9700, model: ATY, RV360M11 - if it helps.

  Any ideas - thanks. (Please keep it relatively simple, if possible)

  As the connected HDTV does not have this effect, the problem is likely related to the PowerBook's display hardware.  If the problem was related to the graphics card (and 'upstream' material) or due to a software problem, waiting for HDTV to show the same effect at a time when the PowerBook display is the effect.

  You can try to do a reset PMU (power management)

  Resetting PowerBook and iBook Power Management Unit (PMU) - Apple Support

  and that he may as well do a LANDAU ('NVRAM') reset too (although less likely to cause described problem)

  How to reset the NVRAM on your Mac - Apple Support

• white screen with purple lines?

  Hi, I just tried to update my iphone 5 to latest IOS and after the black screen with the Apple logo and the loading bar finished it went to a screen with edges white and dark with purple in the darkest bits lines.  I tried to plug it into my pc and go through the itunes app, but it does not record that the iphone is also my lock button is broken so I can't try to do a soft reboot. No one knows what it is and how I can fix this problem? Please help me

  Try to see if iTunes detects the phone into recovery mode: http://support.apple.com/kb/HT1808. This procedure requires the use of the home button but not the lock button, it should be OK.