Push on the wifi notification will detect the BIS or BES

Similar Questions

• no notification push when the application is not running

  We are facing a problem: there is no push during the application notification does not work, how to solve this problem? Thank you.

  Has been solved, is the reason why the certificate.

• in R12, we create magazines... Once created newspapers, we approve it. Then, there are some workflows processed will be made. Meanwhile, newspaper notification will be sent to the contractor of the person who throws the newspaper.  now that I could f

  in R12, we create magazines... Once created newspapers, we approve it. Then, there are some workflows processed will be made. Meanwhile, newspaper notification will be sent to the contractor of the person who throws the newspaper.  now, I could find the type of item for this workflow is: GLBATCH but you want to know the complete workflow process. for this I need wft file name.  Please tell us how to get the wft file.

  Workflow type: sheet

  Hello

  I ran these commands from a remote session (PuTTY, for example):

  CD GL_TOP/patch/115/import/US $

  grep 'ITEM_TYPE "GLBATCH" ' * wft

  I don't think this information is found in any table.

  Kind regards

  Bashar

• Videos YouTube are pushed off the screen to the right by an ad, how to fix?

  When I click on a link to a youtube video, the video appears for a few seconds in the correct location of the site, but then an ad square appears on the side left forcing the video screen to be pushed all the way to the right and off the screen. The video will be displayed on the right side of the column of the videos ' read popular. " Sometimes, a scroll bar appears at the bottom of the window, because the page is now much broader, which will allow me to scroll right to see the video, however, sometimes the scroll bar does not appear and I see only the left edge of the video.

  I reinstalled Adobe® Flash® Player, which did not help and I also have the latest version of Firefox. This began to happen quite recently... maybe a week, there is or not.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• is authorized to build the screen over the events, but push over the event

  Hi all, I know it's a lame question, but I get an error message and now then guess myself

  the way I coded this app. I usually build screens in a non event, calling thread

  Add when adding fields and all the UI stuff, but once it is done, then I put the pushScreen

  in the case of threading

  is it ok?

  Well, it is certainly not a "lame".  I guess you can add fields to a form on a thread of non-event so the screen is not "displayed" (do not push in the battery of the screen still), otherwise, you will need to run that add inside invokeLater or while now the lock of the event.

  Say, if you pushScreen (MyCustomBackgroundCreatedScreen()) new, some of the screen building code can be executed before the screen is actually pushed and the rest will be executed after that.  The "suite" party (whose actual start is quite random) will throw IllegalStateException unless you put your add code (...) within invokeLater or synchronize the lock of the event.

  I did it myself - parses an XML file in a separate Thread and by creating and adding fields one by one to a display manager - and I distinctly remember having to do it the way I described.

  If it's OK or not depends on your design.  If you have only a few fields to add, that's fine, I guess.  Each addition will cause the entire screen to rearrange, which is a small performance decrease. However, unless you have a few fields of thousands (I remember this post here in the forum), you should not notice a significant slowdown.

• Close an application from a screen pushed to the top of another screen?

  I have 3 screens pushed above the other. Since the top of the screen, I have an option to close the application from there. Should I blow the screens
  under the top of the screen before leaving the application or the system will take care of this for me?

  I have it. Thank you.

• How to animate pushing in the face of the shape (photos)

  Hi people,

  I'm quite new to After Effects.  I'm trying to achieve an effect where I have a triangle and then inside the area of this triangle, another triangle gets drawn.  Then the face of this new triangle gets pushed into the deepest simulating the shape.  I mocked basically place this as my before and after the idea is to use sketchup, but I don't know how to do in aftereffects.  Any help or pointers to tutorials that do this kind of thing would be much appreciated!

  before:

  

  After:

  

  Thank you!

  If you try to reach this goal as a 3-d object you must use C4D lite or maybe same Blender (blender.org). If you just want to simulate 3D, you can simply animate layers and shape paths or create your 3D artwork that is simulated as a layered Illustrator file and create your animation separately.  Or the other technique will require a study on how to use the tools.

  Here's what fake 3D with shape layers might look like:

  

  I reorganized the workspace so you can see the properties changed and animated of shape layers. Here is the ASP for the project.

  Dropbox - fake 3d Triangle.aep (Note: your browser may add a .txt extension to the file ASP.) Just remove it and you should be able to open it.

  

• thumbnails has pushed to the left

  I use "composition - blank - lightbox", when I saw the site in the browser, all the thumbnails are pushed to the left of one over the other.

  

  See the result in the browser:

  

  Help, please!

  Liliane

  I think that this thread will be useful: triggers move in the composition in the preview widget

• I want to use Outlook Web Access for Mac, I don't want to use the light version, I want the full version, but you can't push off the mark. I have firefox 3.6.10

  I want to use Outlook Web Access for Mac (snow leopard 10.6.8), I don't want to use the light version, I want the full version but I can't push off the mark on the light version. I have firefox 3.6.10

  (1) you must update at least Firefox 3.6.24 because there are questions of SECURITY of KNOWN MANY with the version you are using.

  (2) the light version is required on non - IE browsers, except if you are running Exchange Server 2010. With Exchange 2010 they added support for multiple browsers run in the version "no light".

• My battery is swollen and pushing on the screen

  So I'm an avid user of Apple; I rave about how Apple products are all my friends all the time, because most of the time they are (this includes my IMac, Mac Book, IPad, and IPod).

  But in recent weeks, my IPhone 5 c has deteriorated. The battery seems to be swollen and pushing on the screen, causing my phone does not work at all except on the charge.

  Without warranty, what can I do? And how I can justify getting another IPhone?

  Take it to an Apple Store

• PUSH for the Runtime Android blackBerry 10 problem

  I'm having a problem with my BB10 Android runtime, it fails when you try to contact CWM and therefore do not send a token valid push on our server.

  I followed the instructions to the letter here: http://developer.blackberry.com/android/apisupport/creating_push-enabled_android_apps.html

  My BAR a /android/android.cfg file that looks like:

  
  
     
        215-513Bxxxxxxxxxxxxxxxxxxxxxxxxxxxx
        http://cp215.pushapi.na.blackberry.com
        bb-
     
  
  

  The credentials are the production and worked when they tested them.

  / META-INF/MANIFEST. MF has the following line adds automatically via the Nature Blackberry plugin:

  Entry-Point-User-Actions: access_internet,read_geolocation,access_shared,play_audio,post_notification
  Entry-Point-System-Actions: _sys_use_consumer_push
  
  Archive-Asset-Name: android/android.cfg
  Archive-Asset-SHA-512-Digest: 0iYhu0YnKDy8vnMxTElTXSD-oEXw8vvVBSBxDI_LxcR_B4w53SoXBW7NbRMAD-ZYmQDnMs_aUQrQaNEssmp36Q
  

  Running a push of the application works very well with android, but it does not work with my BlackBerry 10 Dev Alpha, and we also tried with a Z10. The Alpha DEV us running OS 10.2.0.341.

  There were a few problems of verification of BlackBerry I'm not sure if they are relevant or not:

  targetSdkVersion: 17 is higher than 10:required minimal OS version=10.2
  uses-permission: com.google.android.c2dm.permission.RECEIVE:required minimal OS version=10.0.9
  

  the operating system is running well version 10.2.0.341 on the DevAlpha.

  Edit: added trouble spot:

  When you debug the application on the devalpha, using the standard tools of GoogleCloudMessage, the call

  int googlePlayCode = GooglePlayServicesUtil.isGooglePlayServicesAvailable(this);
          Log.i("GooglePlayCode", "Code:" + googlePlayCode);
          if (googlePlayCode == ConnectionResult.SERVICE_VERSION_UPDATE_REQUIRED
                  || googlePlayCode == ConnectionResult.SERVICE_MISSING
                  || googlePlayCode == ConnectionResult.SERVICE_DISABLED) {
              GooglePlayServicesUtil.getErrorDialog(googlePlayCode, this, 1).show();
          }
          else if (googlePlayCode == ConnectionResult.SUCCESS) {
              regid = getRegistrationId();
              Log.i("RegistrationId", "regid:" + regid);
              if (regid.length() == 0) {
                  getSenderIdThenRegisterBackground();
              }
              gcm = GoogleCloudMessaging.getInstance(this);
          }
  

  This part:

  int googlePlayCode = GooglePlayServicesUtil.isGooglePlayServicesAvailable(this);
  

  returns 9, which from here: http://developer.android.com/reference/com/google/android/gms/common/ConnectionResult.html#SERVICE_I...

  is SERVICE_INVALID.

  EDIT:

  I tested the gcm by skipping the verification for MCG avaliability and my code attempts to record with CWM VIA:

  String msg = "";
                  try {
                      if (gcm == null) {
                          gcm = GoogleCloudMessaging.getInstance(context);
                      }
                      regid = gcm.register(senderId);
                      msg = "Device registered, registration id=" + regid;
  
                      // Save the regid - no need to register again.
                      setRegistrationId(regid);
  
                      // Send the registration ID to our server over HTTP,
                      // so it can use GCM/HTTP or CCS to send messages to our app.
                      sendRegistrationInfo(context, regid);
                  } catch (Exception ex) {
                      StringWriter sw = new StringWriter();
                      ex.printStackTrace(new PrintWriter(sw));
                      String exceptionAsString = sw.toString();
                      msg = "Register Error :" + exceptionAsString;
                      //msg = "Register Error :" + ex.toString();
                  }
  

  that throws an exception, with the stack trace:

  java.io.IOException: SERVICE_NOT_AVAILABLE
      at com.google.android.gms.gcm.GoogleCloudMessaging.register(Unknown Source)
      at com.joemobi.APP_ID.JoeMobiActivity$9.doInBackground(JoeMobiActivity.java:887)
      at com.joemobi.APP_ID.JoeMobiActivity$9.doInBackground(JoeMobiActivity.java:1)
      at android.os.AsyncTask$2.call(AsyncTask.java:287)
      at java.util.concurrent.FutureTask.run(FutureTask.java:234)
      at android.os.AsyncTask$SerialExecutor$1.run(AsyncTask.java:230)
      at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1080)
      at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:573)
      at java.lang.Thread.run(Thread.java:856)
  

  Help, please!

  A possible cause of this problem uses the SDK Service software play Google to enable GDM. Play Google Service is not supported on BlackBerry 10 is why any reference to the API of GCM would fail.

  Using the stand-alone GCM library should still work on BlackBerry 10 and is still said to be supported by Google:

  «The client library for assistance was offered in previous versions of the MCG works always...» »

• Can't push to the physical device but can push to the Simulator

  Anyone know why I can't push my real BlackBerry but I can push to the Simulator?  I'm just accessing this site on my test pc and pointing to our production server BES.

  http://BES_Server:17080 / push? DESTINATION = MyPin & PORT = 7874 & REQUESTURI = localhost

  I can't transfer blue in the upper right arrows on my device when I send the push. but my application it never receives.  What I put in REQUESTURI how?  If so, what it should be and where I put it in my application?  When I use the MDS assessment locally with the Simulator server, it works fine and sends push them to my fine application of the suggestions would be great!

  I had the reliable port wrong number.  It doesn't seem to matter what I put that in the Simulator, but in the real device it Mater.

• I'm trying to sign several documents and I have my saved signature under "fill & sign" the organization that generated the forms highlighted the signature lines and when I try to put my signature, it is pushed outside the signature.

  I'm trying to sign several documents and I have my saved signature under "fill & sign" the organization that generated the forms highlighted the signature lines and when I try to put my signature, it is pushed outside the signature.

  Hi katepell,

  You can simply drag the signature to the desired place by holding it with the mouse.

  Thank you

  Abhishek

• Push all the objects in a tablespace to another

  Hello

  on the 11g R2 (11.2.0.3)

  We need to move all the objects in one tablespace to another.

  Is this possible?

  How can we push all the objects of a logical disk space to a different tablespace?

  Thank you.

  Generate the

  ALTER TABLE TableName MOVE TABLESPACE new_tbsname
  and

  ALTER INDEX REBUILD new_tbsname IndexName

  orders.  You can use "SQL Generation of SQL" or write a PLSQL WHERE USER_SEGMENTS loop.

  If you have some LOBs you must move the LOBs using
  ALTER TABLE TableName MOVE LOB (lobname) STORE AS LOBSEGMENT (TABLESPACE new_tbsname)

  Hemant K Collette

• Copy of an existing MovieClip instance and pushing on the table

  Hello

  Here's what I'm trying to do:

  I have an array of instances of clip called [iconArray].

  what I want to do is to create the effect of moving the icons on the screen left or right. Lets say we are changing the icons on the left - what I want to do is the icon on the left (iconArray [0]: MovieClip) to interpolate left on 20-30 pixels and then fade out, I can achieve at present. The problem is I want to copy of the instance of this interim MC icon and push it iconArray and then the melted in the interpolation of the right.

  In other words, the left most icon should "Pack" back around to the position of the icon mostly right but in order to create the illusion without going through the left most icon pass on the other icons (which seems sticky), I want to create a copy of the left most icon and press it in the table as a new movieclip with the same image and have this right fade While the other is dying off the coast.

  Here's my best interpretation of ascii:

  <-* fade out *-[iconArray (0)] <-iconArray (1) <-iconArray (2) <-iconArray (3) <-iconArray (4) <-* bland in *-(iconArray (5) * COPY of iconArray (0) *)

  Now that you understand what happens if all goes well, I cannot copy table [0] and pushing at the end of the table. When I do:

  var mc_temp:MovieClip = new MovieClip();

  mc_temp:MovieClip = iconArray [0];

  iconArray.push (mc_temp);

  It does not create a new icon, seems to point to the same clip as iconArray [0] and any adjustment that I do x or alpha affect the original MovieClip instance and not the news I created and placed on the table.

  How should be done on a copy of a movieclip, storing in its own instance/var, so it can be displayed and manipulated as a separate entity?

  What you have described initially and I think you're describing now are not the same things, or maybe they are simply not what I think you are trying to do.  What you need to do, it's first move the element to the left and it melted.  Have a listener for when the fade out is completed and have this listener call another function that changes the position x of which faded to movieclip immediately at the other end of the Group and start an another tween to fade.

  I have not worked with the Oregon Tweener sufficiently to be able to tell you how to implement the event listeners.