Can't push to the physical device but can push to the Simulator

Similar Questions

• In the 8530 Simulator, everything works fine, but not installable in Simulator 8520 or physical devices 8520

  Hey guys,.

  I wrote my application and everything worked very well in the Simulator. Then I got to know that the 8520 does not support GPS and I developed all the time to the 8530 because I thought the people here have the 8530, but they are not, but I think that this is not a problem because of the located to get the location of the cell site towers using.

  I checked all my imports if they are compatible with the 4.6.1 OS version and they are.

  http://pastebin.com/3rDjTvgH

  later, I checked if I comment on this two classes I can install the application on the device and also in the Simulator

  If I only comment on one of the two i cannot install

  If I use this code ( http://www.blackberrybase.net/index.php?page=Thread&threadID=4414 [post number 7]) I can install the application... I get a lot of mistakes, but I can install it and it does basically the same as my location class... who told me that the implementation of a location in the 8520 cannot not be the problem

  Why can not install the application on the Simulator, nor in a physical device when I implement this two classes (only in the 8520 with the 8530 everything worked well)

  I searched a lot to find the log files or something that tells me a bit whats wrong, but I've not found anything

  Thanks for the help! :

  I don't know how to close a topic if its possible, but I found a solution.

  I use JRE 4.6.1 instead of use the JRE 6.0 for the case that everyone will have the same problem in only once.

  Here's how to install an old JRE in eclipse:

  http://us.BlackBerry.com/developers/javaappdev/javaupdate.jsp

  welcome them

• How can I install / find drivers for travel Pro BT for W7 Starter Plantronics headset? Have run FIX IT routine for the DEVICES, but this has not solved the problem

  Broadcom BT radio detects the Plantronics headset, adds the device, and then advises that pilots cannot be found.

  I've updated the MS Bluetooth Module software, run it DIFFICULTY for equipment and devices, removed the Plantronics and added again to the BT devices, but still get the same error message.

  From Plantronics Web site advises that the necessary drivers must be provided by the site of the BONE, that is to say of W7.

  I confirmed that the BT Radio is working normally.

  TIA

  Peter K

  Hi PeterKvietinskas,

  It is sufficient to indicate the complete error message you receive.

  Method 1: You can follow the steps mentioned in the link below

  My computer does not recognize my Bluetooth device.

  (Article applies to Windows Vista, not valid for Windows 7)

  Method 2: Download and install all available Windows Update

  Install Windows Update

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You might want to know

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

• Can deploy app in the Simulator, but not to the device

  Sorry about this newbie question, but how is it that a simple HelloWorld application compiled in Eclipse runs just fine on the Simulator, but cannot be installed on a 8320 Curve by the Blackberry Desktop Software?

  I use the latest version at all.  The message returned by the desktop software is:

  ! There was an error importing files.
  No additional applications can be found. Your file can
  contain applications that already exist in the list of applications,
  are not compatible for your device, or errors.

  However, I am able to deploy the application on the handset using the command line tool:

  C:\Eclipse\plugins\net.rim.ejde\vmTools\JavaLoader.exe -usb load \workspace\HelloTest\deliverables\Standard\5.0.0\HelloTest.jad
  

  This installs the application, which then runs correctly on the device.  I can then reload the list of app on the Blackberry Desktop Software tool and it shows HelloTest, but under the properties of the Application-> dependencies it says:

  "Application not available (net_rim_cldc).

  It seems that some dependence crept in the generation of the application and that confuses the desktop tool.  The curve is running 4.5 OS.

  Should I just throw this office tool, or how can I clean the application so that it installs correctly?  Obviously, this is just foreplay before building a much broader application, and I wish I had these little glitches will hamper ASASP.

  Thanks for any help!

  You should be able to download a plugin 4.5 on the site to update. Go to "help > install new software" to open the screen of software available. If you have not yet done so, add the updated BlackBerry site to your Eclipse configuration:

  1. Click on "available software Sites.
  2. Click on the button 'Add '.
  3. Enter a name such as 'BlackBerry update location' and set the location http://www.blackberry.com/go/eclipseUpdate/3.5/java
  4. Click OK, then OK again to return to the screen of the software available

  The 'working with' menu drop-down, select the location of BlackBerry Update (or whatever you named it). Expand the BlackBerry Java plug-in category and you should be able to select an appropriate plug-in version.

• Jawbone Jambox pregnant - I can pair the device, but can not find a driver. I'm running Windows 7 on a Macbook 15

  Please tell me where I can get a compatible driver for Windows 7 for my Jawbone Jambox. I can pair the device but I need the driver to run it.

  Hi George Chaltas,.

  The problem is related to the Jawbone JAMBOX. I suggest you to check with the jaw support for more information about the issue.

  See the following link for support of the jaw.

  http://jawbone.com/contact

• The internet connection on my laptop and other portable device, but not in my office.

  Data sheet:

  -Windows 7 Ultimate 64 bit

  -All browsers and devices are up-to-date.

  Questions:

  I have this problem since yesterday and I tried to solve this problem since.

  The problem is that on my connection (WiFi) network, it says I have access to the internet, and of course it does because I can use internet without problem on my laptop, iphone and other portable device, but not in my office. It says I have an internet connection and when I ping a browser it answers correctly and it gives me all the Member States and other information.

  When I troubleshoot it it gives me something like "your computer seems to be configured correctly, but the device or resource (www.microsoft.com) is not responding." I thought it was a DNS problem so I reset everything, but no luck. Here are things I tried to solve this problem.
  -Reset TCP/ip using cmd.
  -Check if the IP is obtained automatically.
  -Check if I'm using the proxy server.
  -Rebooted (reinstalled windows)
  and many other things that I have searched on google
  But these proposals did not fix the problem.
  Here is my IP config
  
  
  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: Genie2Stonk-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt

  Physical address.... : 68-A3-C4-17-D1-F7

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: 802.11n wireless network adapter

  Physical address.... : 68-A3-C4-17-D1-F6

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::1d3f:8912:70e:57e5% 13 (Preferred)

  IPv4 address: 192.168.1.3 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: December-01-12 01:45:01

  End of the lease...: December - 02 - 12 01:45:06

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 208184260

  DHCPv6 DUID customer...: 00-01-00-01-18-4A-2D-A4-64-31-50-35-E9-3F

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {40B4470F-DE12-452A-ADBA-A425B5329C34}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:4137:9e76:1419:b1f:3f57:fefc (preferred

  EXEs)

  Address IPv6 local link...: fe80::1419:b1f:3f57:fefc % 12 (Preferred)

  ... Default gateway. : ::

  NetBIOS over TCP/IP...: disabled

  C:\Windows\System32 >
  I can't understand what I've tried so many things and nothing never gave me a connection back Please HELP.
  If I need to provide more information please let me know.
  Thank you.

  Hi zinx2op,

  Thanks for posting your query in Microsoft Communities. The description of the problem, I understand that you are not able to connect to the WiFi of the desktop computer. Provide the following information for the better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You use a third-party security software?

  ·         If it works well before?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  How can I troubleshoot network card?

  For reference:

  How to reset the Protocol Internet (TCP/IP)

  Let us know if you need more assistance.

  Thank you.

• How to remove the SQLite DB in physical device using Oracle_MAF?

  Hello

  I'm developing a mobile application using Oracle-MAF, I made some changes on the table in Oracle DB, then changed my WebService existing and also made corresponding changes to the persistence - mapping.xml and DB_NAME.sql in the implementation of the MAF. But every time I try to deploy it in the physical device (Android), changes does ' t affect the newly deployed application.

  Please note that I tried to uninstall via the settings app still persist the same question. Can you please suggest me to remove full SQLite DB on the device so that the changes can reflect on the unit.

  Thank you

  Indana Blackburn

  Hi Steven,

  Thanks for your reply, the problem has been fixed. Please look below the changes I did created DB then new webservice and implementation of the MAF.

  Sample:

  • Earlier, TABLE_ONE (column - EMP_ID, ROLE_ID) as the primary key and the constraint name as TABLE_ONES_PK.
  • Now, I've changed (column - EMP_ID, FILE_ID) as a key name and primary constraint as TABLE_ONE_PK

  If you have seen clearly the constraint name went from ... THOSE... in ... ... A, when I try to insert a duplicate value (EMP_ID and ROLE_ID) with FILE_ID unique he throws a java.sql.SQLIntegrityConstraintViolation Exception. In additional it's show error violated primary key as TABLE_ONES_PK nota_PK TABLE_.

  The problem exists in DB, I deleted the constraint _PK TABLE_THOSEbut Iindex was not deleted from the DB. This is the reason why it shows SQLIntegrityConstraintViolation error, I removed and now it works very well without any problems.

  Thank you

  Indana Blackburn

• How to downgrade my iCloud upgrade? I need is no longer the additional storage space. I tried on my devices, but it still says that my current plan is 50 GB at $0.99

  I have tried to downgrade my storage in iCloud on my devices, but always says that I pay for $0.99 50 GB upgrade

  Is no longer need her so, how can I stop these payments?

  You can decrease the amount of storage by selecting a new plan directly from your iPhone, iPad, iPod, Mac or PC (for example, a plan of 5 GB to replace a 200 GB plan). The downgrade will take effect after the end of your monthly or annual subscription in progress.

  iOS

  1. If you use the iOS 8 or laters, go to settings > iCloud > storage. If you are using an older version of iOS, go to settings > iCloud > storage and backup.
  2. Click Change storage Plan.
  3. Press Downgrade Options and enter your Apple ID.
  4. Choose a different plan to use when the expiration of your current storage plan.
  5. Tap done.

  OS X

  1. Choose the Apple menu > System Preferences, and then click iCloud.
  2. Click on manage in the lower corner on the right.
  3. In the upper right corner, click Change storage Plan.
  4. Click Options to Downgrade.
  5. Enter your Apple ID password, then click on manage.
  6. Choose a different plan to use when the expiration of your current storage plan.
  7. Click done.

• ATRIX HD: delete the mail on the device, but not server

  How can I delete messages on the device, but not on the server?

  @ Cloud

  If you try installation 'auto', then you will not get this option. Try the manual installation option, and you can select the option to keep the email on the server. Please note that this option is available for the POP3 e-mail account. With IMAP and Exchange sync is always maintained. POP is "only a download" Protocol. Try that and let us know how that works. Thank you.

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows found driver software for your device but encountered an error trying to install it. The system cannot find the specified file.

  Original title: Windows encountered a problem installing the software driver for your device...

  Arrrrgh!  Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.

  I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "

  The job of printer/copier/fax end but not go on the scanner.

  I tried the 'fixes' to epson.com repeatedly with no luck.  This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.

  I ran the program to 'fix' Microsoft ATS with no luck.  It has detected the error and said that the problem has been resolved, but guess what?  No, it isn't.

  I clicked on install update driver/driver from Device Manager.

  I tried the work around, eliminating the "LowerFilters" of the registry.  Guess what?  You have it, no luck.

  So, before I go and buy a new printer/scanner, with no guarantee that they will work.  Does anyone have another suggestion?

  I am running Vista, 32-bit.

  You can also try and replace or install the ntprint.inf file.

  I had a similar problem on a Windows 7 PC and noticed that this file was not present.  I just copied the file from a different PC Win7.  The printer, I tried to install was a Brother MFC-J410w.

  The file can be found here C:\Windows\inf

  Hope this helps someone.

• Receive the following error: Windows found driver software for your device, but encountered an error so as to install it.

  The following message please just explain?-Windows found driver software for your device, but encountered an error so that to install it. - is - Intel(r) 82566DC Gigabit Network Connection - then he says:-this device cannot start. (Code 10) What this means and how it effects the operation of the computer?-under material network compatible two adapters are mentioned-1. Intel(r) 82566DC Gigabit Network Connection (intel) and 2. Intel(r) 82566DC Gigabit Network Connection(Microsoft)

  Hi Mohan kumar,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you try the steps in the Microsoft Knowledge Base article mentioned below for you receive the error message:

   

  Windows found driver software for your device but encountered an error trying to install it. Setting is incorrect.

  http://support.Microsoft.com/kb/940267

   

  Method 2: You can also view the article in the Microsoft Knowledge Base for instructions on fixing the code 10 error messages:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Let us know if that helps.

• Windows found the driver for your device, but encounter an error when trying to install

  I have no ideal, what caused this problem because I am very sure that it was working again fine until I went to bed, but I woke up the next day, realize that my internet was completely cut off. I tried to update my network device but it doen't seem to be of any help.

  I hope that someone capable of seccond me with some light as what the case of the latter and the resolution.

  Thanks in advance. :)

  -Brian

  Hi Brian,.

  You can follow the steps described in the article below

  You receive an error message if you try to install a USB device on a Windows Vista computer that has been upgraded from Windows XP

  http://support.Microsoft.com/kb/940267

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Unable to connect any device bluetooth on my windows vista, go to bluetooth devices but the drop down menu will not drop

  Original title: mouse bluetooyh
  Unable to connect any bluetooth devices on my computer windows vista, go to bluetooth devices but the drop down menu will not drop iam so unable to connect any bluetooth. any suggestions

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  f the foregoing does not fix it contact the manufacturer of the device

• image in SVG shows it on the Simulator, but not on the device

  Hi all

  I put theelement in an SVG file with an image that I pick up store or the SD card. I can see the image set on the Simulator, but am not able to see it on the device.

  Here is the code snippet I definition of the element in the image:

  SVGElement "newelement" = (SVGElement) _document.createElementNS (SVG_NAMESPACE_URI, "image");
  newElement.setTraitNS (XLINK_NAMESPACE_URI, "href", dittos);
  newElement.setFloatTrait ("x", 0);
  newElement.setFloatTrait ("y", 0);
  newElement.setFloatTrait ("width", Display.getWidth ());
  newElement.setFloatTrait ("height", Display.getHeight ());
  _svg. AppendChild (newelement);
  Invalidate();

  Thanks in advance.

  ~ Shri

  It was with the size of the Image. Too big a picture and the device wont set it to SVG canvas.

  If the scale down the image and set the image if you want to set asin SVG.