Put a % sign in a label (Table column)

Similar Questions

• Error in ODI, ORA-01747: invalid column, table.column, or user.table.column specification

  ODI-1227: SrcSet0 (load) task fails on the source of ORACLE STAGING_YYY connection.

  Caused by: java.sql.SQLSyntaxErrorException: ORA-01747: invalid column, table.column, or user.table.column specification

  We get the above error whenever we run an ODI interface,
  This interface is straight forrwad a mapping update incremental IKM Oracle, although we have identified the problem but do not know how it could be fixed

  Source table that contains two columns that are generally identified as the key of DB

  NAME

  / / DESC

  the target too has the same columns. If we disable these mappings to columns from the Active maps the interface works very well, however, with the latter, it fails. We will not be able to change the name of the column in the target because it is a table of Oracle products and has several dependencies to the breast.

  Please suggest an alternative and also if our understanding is correct.

  Thanks in advance.

  Jay

  HI Jay

  change the column as DESC and put "DESC" in the name, and save it for all the source concerned target and remapping to remove the column from the interface

  Thank you

  P

• How to align an image centered in the advanced table column.

  Dear friends,
  
  I developed a page of the OAF with an image column in the advanced table, but by default the image column is not centered,
  How to make image centered in the advanced table column, please let me know your suggestions.
  
  
  Thank you
  Keerthi.K

  HAD,

  In your column, create a tabular presentation and a rowlayout and the image, and then put in the rowlayout. Set the horizontal alignment of the rowlayout inwards.

  Kristofer Cruz

• How to get the names of the table columns in the quick dashboard

  How to get the names of the table columns in the quick dashboard
  
  
  Thanks and greetings
  ------------------------
  Kishore P

  Make a prompt like:

  SELECT case when 1 = 0 then 'D0 time. " "" T02 by month name "other" 'D2 market' '. "" M04 region' ' the end 'Sample Sales' UNION ALL SELECT case when 1 = 0 then 'D0 Time. " "" T02 by month name ' else ' 'Time D0. "" T02 by month name ' ' the end 'Sample Sales.

  Put the name of column in single quotes.

  Make your rank as a function:
  Rank ('F1 income'. "" Recipes 1-01 (after all) "by @{pColumn} {'D0 time'. ({"" T05 annually name '})

  It works fine for me

  concerning

  John

  http://obiee101.blogspot.com

• Select the table column group and generate a sequence number

  I have to select data from a table column group and generate a sequence for every reset of the sequence from 1 to leave.
  
  For example:
  
  Data:
  Col1 Col2 Col3 Col4
  A NA KA-2009-08-13
  B NA KA-2009-08-13
  C NA KA-2009-08-13
  A NA KA-2009-08-13
  B NA KA-2009-08-13
  A NA KA-2009-08-13
  
  Expected results of the Select statement:
  Col1 Col2 Col3 Col4 Seq_No
  A NA KA-2009-08-13 1
  A NA KA-2009-08-13 2
  A NA KA-2009-08-13 3
  B NA KA-2009-08-13 1
  B NA KA-2009-08-13 2
  C NA KA-2009-08-13 1
  
  How can it be possible with a SELECT statement? Is it possible to assign the following numbers for a group of columns and put it back when it changes? In the above example, all columns are the key to generate the seq number
  
  I know that this can be done using procedures stored and that is how I do it now by introducing a temporary table.
  
  Can someone help me with this? Please let me know if the question is too vague to understand!
  
  Thank you
  Nachi

  Use the row_number() analytics.

  Ravi Kumar

• How can I put a sign of mine as a sign of the tab for my site?

  How can I put a sign of my choice as a sign of the Tab for a site, I created? Thanks in advance - basifra

  See also:

  • http://en.Wikipedia.org/wiki/favicon
  • http://www.w3.org/2005/10/HOWTO-favicon

• Can u put the Apple Watch mode bedside table without getting the dock?

  I Haz one question I am about to get a Apple Watch for my birthday

  question, version 1

  can u put the Apple Watch mode bedside table with the original charger, or get the dock from Apple?

  Hello

  Yes - you can put Apple Watch mode table bedside without having to buy the Apple (or other) docking station.

  To place your watch mode bedside table:

  • Make sure the option is turned on: on your iPhone, in the application of the watch, go to My Watch (tab) > General > scroll mode bedside table.
  • Connect your watch to its charger (with power connected):
    • Place your watch on the side with the buttons facing up.
  • To see the time, tap the screen or slightly shift your watch:
    • By design, when the watch is in this mode, pushing even your bedside table may be sufficient.
  • If you also set an alarm with the alarm clock app on your watch, it will warn you at the specified time.

  More information:

  Use the mode table bedside on your Apple Watch - Apple Support

• Create table 2d by pulling larger 2d table columns, as indivated by an array of Boolean

  Hello

  I have a 2d chart with 16 columns that contain data from different input channels.  I also have a 1 d array of Boolean (length 16) corresponding to these columns.  In the table of Boolean 1 d, if a value is true, I want this column in table 2d to stay.  If the value in the table of Boolean 1 d is wrong, I want to delete the corresponding column.

  Thus, for example, if the table of Boolean 1 d looks like this:

  [T T T T F F T T T F T T F F T F]

  the new 2d array would be 10 columns, which correspond to the columns of the old 16-column of table 1, 2, 3, 4, 7, 8, 9, 11, 12 and 15.

  I am very new to labview (programming just started yesterday). Can someone help a newbie to do something that is probably simple? In my view, that there will be an iteration back through the deletion of rows and 16 columns table columns as they come if the value of the Boolean vector is false, or iterate forward through the 16 columns and add columns to a table if the value of the Boolean vector is true... but I don't know how to do this.

  Thank you

  Matt

  If you have 2012 you could just do this:

  

  -Ryan S.

• The Master Table column updated based on the sum of column Table detail

  
  With the help of JDev 11.1.1.6.

  I have a master-detail table based on a link to BC.

  The main table has a column that displays an InputText or an OutputText, based on the value in another column.

  If the InputText is displayed, the user can enter a value and the database will be updated with that value.

  If the OutputText is displayed, it must be a sum of a column in the secondary table.  Also, this value will be written in the database.

  Question:

  How can I fill the OutputText in the main table with the sum of the values in a column in the secondary table?

  The detail table column is a manually entered InputText field.

  Thank you.

  Create a spike in the main table and write in its expression as follows - DetailVoAccessorName.sum ("ColumnName");

  This will calculate the sum of column table detail and then you can set the value of the transient attribute to attribute DB on backup operation

  Ashish

• ORA-01747: invalid user.table.column... on the REPLACEMENT notice

  Oracle 11g Release 2

  I run an UPDATE statement. In the 'set' I am trying to update a column by using a subquery on the right side. REPLACE the statement Gets the error ORA-01747: specification of invalid column, table.column, or user.table.column.

  create table tab1
  ( file_id   number  ,
    record_id number  ,
    part_type_id number ,
    part_number  number ,
    positon_id   number ,
    notes        varchar2(255) ,
    mapped       varchar2(1) default 'N'
  )
  /
  insert into tab1 values(1,1,123,777,1,'NEW|A/C COMPRESSOR KIT','N') ;
  insert into tab1 values(1,2,123,777,2,'REMAN|A/C LINE','N') ;
  insert into tab1 values(1,3,123,777,2,'TEST NOTE','N') ;
  commit;
  select * from tab1;
  /*
    FILE_ID  RECORD_ID PART_TYPE_ID PART_NUMBER POSITON_ID NOTES                     MAPPED
  --------- ---------- ------------ ----------- ---------- ------------------------- ------
          1          1          123         777          1 NEW|A/C COMPRESSOR KIT         N
          1          2          123         777          2 REMAN|A/C LINE                 N
          1          3          123         777          1 TEST NOTE                      N
  */
  
  
  DECLARE
     v_note2 varchar2(255) := 'NEW' ;
  BEGIN
  UPDATE tab1 t 
           SET 
            , t.notes =  (select REPLACE(t.notes,v_note2,null) 
                          from dual )
        WHERE t.file_id = 1         -- value comes from another source
        AND   t.part_type_id = 123  -- value comes from another source
        AND   t.part_number = 777   -- value comes from another source
        AND   t.position_id = 1  ;  -- value comes from another source
  END ;
  /
  
  ERROR at line 3:
  ORA-01747: invalid user.table.column, table.column, or column specification
  

  Here's what the end result should be:

    FILE_ID  RECORD_ID PART_TYPE_ID PART_NUMBER POSITON_ID NOTES                     MAPPED
  --------- ---------- ------------ ----------- ---------- ------------------------- ------
          1          1          123         777          1 |A/C COMPRESSOR KIT            N
          1          2          123         777          2 REMAN|A/C LINE                 N
          1          3          123         777          1 TEST NOTE                      N
  

  Hello

  orclrunner wrote:

  Oracle 11g Release 2

  I run an UPDATE statement. In the 'set' I am trying to update a column by using a subquery on the right side. REPLACE the statement Gets the error ORA-01747: specification of invalid column, table.column, or user.table.column.

  1. create table tab1
  2. (file_id number,
  3. number of record_id,
  4. number of part_type_id
  5. number of PART_NUMBER,
  6. number of positon_id
  7. Notes VARCHAR2 (255),
  8. mapped by default varchar2 (1) ' don't
  9. )
  10. /
  11. insert into tab1 values (1,1,123,777,1,'NEW |) Kit COMPRESSOR / it, ' don't);
  12. insert into tab1 values (1,2,123,777,2,'REMAN |) A/C LINE ',' don't);
  13. insert into tab1 values (1,3,123,777,2, 'NOTE of TEST', ' don't);
  14. commit;
  15. Select * from tab1;
  16. /*
  17. FILE_ID RECORD_ID PART_TYPE_ID PART_NUMBER POSITON_ID MAPPED NOTES
  18. --------- ---------- ------------ ----------- ---------- ------------------------- ------
  19. 1 1 123 777 1 NEW | A/C COMPRESSOR KIT N
  20. 1 2 123 777 2 REMAN | A/C LINE N
  21. 1 3 123 777 1 TEST NOTES N
  22. */
  23. DECLARE
  24. VARCHAR2 (255) v_note2: = "NEW";
  25. BEGIN
  26. Tab1 t UPDATE
  27. SET
  28. t.notes = (select REPLACE(t.notes,v_note2,null)
  29. the double)
  30. WHERE t.file_id = 1 - value comes from another source
  31. AND t.part_type_id = 123 - value comes from another source
  32. AND t.part_number = 777 - value comes from another source
  33. AND t.position_id = 1;  -value comes from another source
  34. END;
  35. /
  36. ERROR at line 3:
  37. ORA-01747: invalid column, table.column, or user.table.column specification

  Here's what the end result should be:

  1. FILE_ID RECORD_ID PART_TYPE_ID PART_NUMBER POSITON_ID MAPPED NOTES
  2. --------- ---------- ------------ ----------- ---------- ------------------------- ------
  3. 1          1          123         777          1 | A/C COMPRESSOR KIT N
  4. 1 2 123 777 2 REMAN | A/C LINE N
  5. 1 3 123 777 1 TEST NOTES N

  The comma after SET is a syntax error.

  Why you use double?  Why not just

  UPDATE tab1

  SET of notes = REPLACE (notes, v_note2)

  WHERE file_id = 1

  ...

  ?

• Error Type 2 SCD: ODI - 1228:ORA - 01747: invalid column, table.column, or user.table.column specification

  ODI error. When you try to import.

  Error Type 2 SCD: ODI - 1228:ORA - 01747: invalid column, table.column, or user.table.column specification

  It is a common question.

  Allow your SCD SCD table column properties if you do not select "crush on change."
  This property simply

  -Online CPC IKM goto => select ignore option error on update of existing lines.

• What is the table/column name for group of segments data

  Hello!

  I'm looking at the specific table/columns that contain the values for the segments of people group by assignment. Well want to can someone tell me.

  Thank you.

  Jon

  Join the pay_people_groups with per_all_assignments_f with the people_group_id of the column

• Works with tables/columns of the lines and the parameter names... syntax help

  I am trying to create a function that returns the distinct value and counts of a user defined schema/table/column.

  The code below defines a [stats_on_column_obj] object type and creates a single table of this type [stats_on_column_tab].

  The function is supposed to take three input variables: p_schema_name, nom_table_p, p_column_name and return an array (above).

  I can hardcode a select into (the)... but once I try to convert it into settings & immediate exec I'm stuck. The red section is where the problem is (I think).

  Oracle 10g.

  Stats_on_column_obj CREATE TYPE IS OBJECT (

  COL_VAL VARCHAR2 (500),

  NUMBER OF COL_VAL_CNT (7)

  );

  CREATE TYPE Stats_on_column_tab IS TABLE OF stats_on_column_obj;

  
  

  FUNCTION to CREATE or REPLACE get_STATS_ON_COLUMN

  (

  p_schema_name IN varchar2,

  nom_table_p IN varchar2,

  p_column_name IN varchar2

  )

  RETURN STATS_ON_COLUMN_tab

  IS

  l_STATS_ON_COLUMN_tab STATS_ON_COLUMN_tab: = STATS_ON_COLUMN_tab ();

  n INTEGER: = 0;

  str_select_tbl varchar2 (5000);

  BEGIN

  str_select_tbl: = 'SELECT'. p_column_name |' as col_val, count (*) as col_val_cnt FROM ' | p_schema_name |'. ' || nom_table_p: ' group of ' | p_column_name;

  FOR r IN (str_select_tbl)

  LOOP

  l_STATS_ON_COLUMN_tab. EXTEND;

  n: = n + 1;

  l_STATS_ON_COLUMN_tab (n): = STATS_ON_COLUMN_obj (r.col_val, r.col_val_cnt);

  END LOOP;

  RETURN l_STATS_ON_COLUMN_tab;

  END;

  /

  [Error] PLS-00103 (124:4): PLS-00103: encountered the symbol "LOOP" when expecting one of the following numbers: * & - + / at rem rest mod.. < an exponent (*) > | multiset year DAY_

  [Error] PLS-00103 (126:9): PLS-00103: encountered the symbol "=" when expected in the following way: constant exception < an ID > < a between double quote delimited identifiers > double Ref table Fedya Chariot of time timestam

  [Error] PLS-00103 (127:29): PLS-00103: encountered the symbol "

  [Error] PLS-00103 (128:4): PLS-00103: encountered the symbol "END" when waiting for one of the following numbers: begin function package pragma procedure subtype type use < an ID > < a double quote delimited identifier > form

  SELECT * FROM TABLE (get_STATS_ON_COLUMN ('SCHEMAS_X', 'TABLE_X', 'COLUMN_X'));

  Scott@ORCL > CREATE OR REPLACE
  FUNCTION get_STATS_ON_COLUMN () 2
  3 p_schema_name IN varchar2,
  4 nom_table_p IN varchar2,
  5 p_column_name IN varchar2
  6                                )
  7 STATS_ON_COLUMN_tab of RETURN
  8 EAST
  9 v_STATS_ON_COLUMN_tab STATS_ON_COLUMN_tab: = STATS_ON_COLUMN_tab ();
  10 v_n INTEGER: = 0;
  11 v_str_select_tbl VARCHAR2 (5000);
  BEGIN 12
  13 v_str_select_tbl: = ' SELECT stats_on_column_obj (' | p_column_name |) ', Count OF ' |
  14 p_schema_name | '.' || nom_table_p | "Group of" | p_column_name;
  15 v_str_select_tbl EXECUTE IMMEDIATE
  COLLECTION IN BULK 16
  17 IN v_STATS_ON_COLUMN_tab;
  18 RETURN v_STATS_ON_COLUMN_tab;
  END 19;
  20.

  The function is created.

  Scott@ORCL > select *.
  2 from table)
  (3 get_STATS_ON_COLUMN)
  4                                            'SCOTT',
  5                                            'EMP',
  6                                            'JOB'
  7                                           )
  8                       )
  9.

  COL_VAL COL_VAL_CNT
  -------------------- -----------
  CLERK                          4
  SELLER 4
  PRESIDENT 1
  MANAGER 3
  ANALYST 2

  Scott@ORCL >

  Or better change function in the pipeline.

  SY.

• How to disable the right click option resize on the table column header?

  Hi all

  Please let us know how to disable the right click option resize on the table column header.

  The problem is that when I right click on the header of the column, the column is selected and the context menu with options like type, resize columns, columns, etc... is popping. We want to disable the option of re-size column.

  We create a link by program the values in the table (do not use Bc4J) and the version of Jdeveloper's 11.1.2.2

  Thanks in advance,

  -Vignesh S.

  So who did not observe here is that the table is wrapped in a panelCollection and who is in fact source menu.  However, the content of the context menu can be controlled through the featuresOff of the panelCollection component attribute

• Insertion of a DML statement as string in a table column

  
  Hello

  Is there a way I can insert a dml statement (such as "update a SET COL1 = 10") in a table column using a procedure or a function.

  I can do it by simply running an INSERT statement. But how can I do with a proc or function without getting an error "Cannot perform a DML operation inside a query"

  Please advice

  Hello

  937454 wrote:

  In fact, it can be done through a procedure. I was trying to see if I can do this with a function.

  Of course, you can do so via a function; you just can not call this function of a SQL statement.

  If the function returns a VARCHAR2, then you could call it like this:

  DECLARE

  foo VARCHAR2 (100);

  BEGIN

  foo: = fun_a;

  END;

  or like this:

  BEGIN

  dbms_output.put_line (fun_a);

  END;