The letters 'F', 'G' and 'H' stopped just to the light!

I don't have as many problems with this phone. Aside from a wobbly connection on the slider and the lack of Android 1.6 + (which is now), I am extremely satisfied with this phone.

Anyway, the three letters in the title ceased to maximum light and it the symbols when you press 'shift' also do not illuminate. It's really bugging me, I want a phone that still has its working lights! Are you if I went in an Orange store and talking to the staff I could get a replacement or something? I needed to go into my stores anyway, so I might as well pop in Orange while I'm here tomorrow.

If you go here

http://www.Motorola.com/consumers/GB-en/consumer-products-and-services/MOTOBLUR/meet-MOTOBLUR

And go to MyMotoblur and log on to your account Blur here, you can clear your phone or find it if need be

Hope this helps

Tags: Motorola Phones

Similar Questions

  • I click on closing down and then stops just my pc

    It starts with stop and then it stops at this step... https://mysite.uchicago.edu/personal/bsdad_rcarter/Blog/Lists/Photos/112107_1514_ParallelsDe1.png... Please help me!

    Hello

    1. you did it before the issue of any material changes or software?
    2. What do you mean by "PC stops?
    3. you are not able to shut down your system?

    Method 1:

    Step 1: Start your system in safe mode and check if you get the same error message. Then review the article mentioned below to do so:
    A description of the start in Windows XP Mode options:
    http://support.Microsoft.com/kb/315222

    Step 2: If you receive any error in safe mode, please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
    http://support.Microsoft.com/kb/310353
    Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

    Method 2: Please, try the steps mentioned in the article mentioned below:
    Advanced Troubleshooting for shutdown problems in Windows XP:

     http://support.Microsoft.com/kb/308029

  • It is only five years, since I bought the MBP. And "not Stopped Apple hardware support for this products just because they sell it?

    Hello

    I have a 17-inch, mid 2010 MBP.

    The internal DVD drive is broken.

    I contacted the Support of Apple. And sheet metal tech me that "Apple does not support any material for the MBP.» And what I can do is to get an "external DVD drive.

    It is only five years, since I bought the MBP. And "not Stopped Apple hardware support for this products just because they sell it?

    Ed

    < re-titled by host >

    If your computer is on this list it is no longer supported: Vintage and obsolete products - Apple Support

  • Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

    Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

    I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

    We will cover all the possibilities.

    1. download each of the tools for deletion below, save it to your desktop:

    Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

    IMPORTANT! => Activate the Windows Firewall immediately after the restart.

    IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

    4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    5. Repeat step #4 for another removal tool.

    Tips:

    -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

    -Online start the problem in Mode safe computer, if necessary, proceed as above.

    -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

    Why you don't need your anti-virus to scan your email
         http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

    -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I just moved from windows to mac and changed my photoshop and lightroom, but now continues photoshop and lightroom stopping self on the mac, mostly photoshop and lightroom, anyone know why?

    I just moved from windows to mac and changed my photoshop and lightroom, but now continues photoshop and lightroom stopping self on the mac, mostly photoshop and lightroom, anyone know why?

    Yes, never make it.  I think Mac Yosemite by default active Standby Mode.

    Nancy O.

  • My gradient does not work.  He worked on an image and then stopped on the next!  I have cs6.  It is just the display of the background gray and white checkerboard on the upper left corner.  I click on the arrow down to see if I can it go back to black and

    He worked on an image and then stopped on the next!  I have cs6.  It is just the display of the background gray and white checkerboard on the upper left corner.  I click on the arrow down to see if I can get it back to black and white and it will not change... it will not change if I click on any of them.  I think it might be a bug?  Any ideas will be appreciated.  I tried to reset them as well.  Thank you!!

    Check your Options bar.  You have the opacity set to 10%.  Easy to do.  Just hit the 1 key while the gradient tool is selected, and it's done. By pressing the 0 key will take you back to 100%

  • The Apple Mobile Device Service service on Local computer started and then stopped.

    My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says  "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)

    If your iOS device does not appear in iTunes, try the following:

    1. Open Control Panel > Device Manager
    2. Plug in your device
    3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
      It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
    4. Right-click and select software update of the driver...
    5. Click Browse my computer for driver software
    6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
      C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
    7. Click on let me pick from a list of drivers for devices on my computer
    8. Click on Apple Mobile Device USB Driver
    9. Click Next, then close and exit the Device Manager

    To step 3 above, open the Device Manager. Expand one of the articles that are listed.

    • USB Bus controllers
    • Imaging devices
    • Portable devices
    • Other devices

    Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

    Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

    If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

    Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

    TT2

  • Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

    Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

    You should be able to move your cursor to the top of the screen and the menu bar will fall.  So, you start with

    Drag the slider to the top of the screen against the edge and hold that and you should see

    Click the button of "green".  This should take you out of mode full-screen Mail.

    Command + control + F should do it too.

    Also when you have the cursor at the top of the screen and the menu bar comes down, you could also use Mail-> view-> full screen output

    You should also be able to use the command + Tab to switch to another application

  • Firefox does not load pages and said "Stopped" in the lower left corner of the screen.

    Latest FF and XP Pro. 2.4 Ghz Celeron processor, 1 GB of RAM. FF will work for awhile then it will stop loading pages and say 'Stop' in the lower left corner of the screen. Sometimes I can refresh and the page loads, but 95 out of 100 times I can keep refreshing and it will say "stopped". Alternatively, the page will be partially load and then quit and say 'stop. ' I disabled IPv6 and DNS Prefetching and he always does. IE does the same. VERY frustrated. My last PC started doing this and I've finally upgraded to a newer version and it was fine for a few months, but began to do the same thing recently. Arghhh... Thank you!

    This has happened

    Each time Firefox opened

    is with my last computer a few months ago

    You, me and many others (from discussions throughout the net) have this same problem. I had a few glances at Mozilla, take a look, they couldn't find a problem or a solution.

    Here's what I found works - the problem arises on me when I upgraded to Firefox 3.63. 3.63 FF of uninstall and install 3.59. You can always download until the end of June or July I think.

    My problems went away with 3.59. Seems to only affect users of Windows as Mac Firefox 3.63 works very well.

    Found a few discussions pointing to ZoneAlarm Firewall time-out managers and some download tools. I have ZoneAlarm, so I don't think that was the cause, just another victim.

    I wish Mozilla would pull the plug on 3.63, repackage as 3.64 3.59 and go back to the drawing board until they find out what is wrong.

  • Envy 15 k005tx: laptop will not close properly... the va just black screen but the light is on and the fan also

    Laptop doesn't go out normally... va just black screen but the light is on and the fan is also on... so I have to stop it by pressing the power button... help plz...

    Hello

    On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

    Try to use the following method to see if you can install an earlier version of the driver IMEI.

    Download driver IMEI on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

    Disable your wireless card (should be f12 ).

    Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

    When finished, restart the laptop.

    If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

    https://support.Microsoft.com/en-GB/KB/3073930

    Kind regards

    DP - K

  • Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.

    Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.

    It won't let me choose a mode which worked well, it is stuck on "Start windows normally" for 20 seconds.

    Hello

    Restore the system from the recovery console and check.

  • Error - windows search on the local computer started and then stopped. Could not start the Windows Search service.

    Original title: windows search service does not start.

    When I try to start the service "windows search" I get the following error "windows search on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the services of newspapers and performance alerts' I tried manually and nothing, can someone help me please.
    It is a XP machine and yes I have windows search 4.0. I need help to get that windows search service has restarted.

    I no longer need it, I just backed up all my files and re - install windows XP.

  • Vista automatic update said updated 1 of 9 (KB2653956) installation stops at about 10% and custom finishes just continues to run

    Vista automatic update said updated 1 of 9 (KB2653956) installation stops at about 10% and custom finishes just continues to run.

    I've been stuck here for 2 weeks

    Hi Joepompous,

    I suggest you to follow the steps in the link and check if it helps.

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    I hope this helps.

  • Adobe Creative Cloud Desktop install fails and stops just during installation!

    Help, please! I tried to upgrade to Adobe CC Office 2015 (updated June 16) and nothing happens just empty, lost all the features, was not yet able to leave adobe cc or access any info or apps.

    To try to solve this problem, I had a bum steer on another forum saying uninstall Adobe CC Office including all my applications (first pro, media encoder, after effects, lightroom, speed grade), then reinstall.

    Since the withdrawal of all software, I have downloaded the Office Installer Adobe CC and tried to install, but stop just an average quarter thanks to the installation!

    I have Adobe Creative Cloud subscription for the Faculty and staff and have lost everything!

    No one can tell you anything without the proper system or other technical details info. Start by running the cleanup tool and removing all folders OOBE and other whatnot.

    The Adobe Creative Cloud Cleaner tool allows to solve installation problems

    Log, activation, or connection errors. CS5.5 and later, Acrobat DC

    Mylenium

  • What is c? -osxupdcombo10.10.5.dmg - he started to automatically download on my mac and I stopped it... This is a copy of the name of the file and I have no idea what it is?    osxupdcombo10.10.5.dmg

    What is this file? -osxupdcombo10.10.5.dmg - he started to automatically download on my mac and I stopped it... This is a copy of the name of the file and I have no idea what it is?    osxupdcombo10.10.5.dmg

    This is the last update to Yosemite.

    If you do not run 10.10.5 then you run to certain security risks.

Maybe you are looking for

  • camera iOS 10 bug

    Since upgrading my 5s to ios 10, my camera has stopped working. The phone says that the flash will not work until the unit cools. It is not still warm to the touch. The camera is completely black for cameras front and back. The flash does not illumin

  • How to find my connection messages from my Keychain password

    Just logged in my POSTS, and he asked me for my password which I know. How can I go to my keychain and find my password for MESSAGES? Although I can't believe something has changed and I have no idea

  • can I connect a turntable to computer and listen to music

    I have a Platinum ion to albums or documents (I don't know what to call them) and wonder if I can connect to the computer and listening to music.  You want to know how to have sound and so on if I can.

  • I do not understand how to send an email

    Original title: phobic E-maildifficult to understand how to send an email

  • Need to recover a file deleted by Windows Disk Protection

    Yesterday, I created an important file on a computer that has Windows Disk Protection enabled on drive C: (I wasn't aware of this). The computer, and then deleted everything is new on the C: drive, as well as my file. Since then, the computer has bee