Put down the mouse while listening to the other audio

Similar Questions

• Audio is OK until the PP CS5.5.2 is open to all the other audio fails and PP works

  This could be an Nvidia, Windows 7 64 bit, Matrox MX02, Premiere Pro CS5.5, ASUS P5E Deluxe problem or a bit of everything.

  
  

  
  

  When I start the system, audio system, CDs and mp3 files work.

  
  

  When a launch of first Pro CS5.5.2 audio works replaying in PP and the system of files as mp3s continue to play.

  
  

  When I close Windows Media Player and re - open the audio only one that works is the PPCS5.5.2

  
  

  This only happens after that PP is open.

  
  

  When I reboot everything is back to normal, until the PP is open.

  
  

  All the other audio fails, sound system, CD and mp3 files

  
  

  The audio is routed to the Matrox MX02 with 5.5.1 drivers not the SoundMax card on ASUS P5E deluxe with the latest drivers and BIOS.

  
  

  This is consistent. I have not a clue as to what is at the origin of the problem. Matrox is studying the MX02.

  I use the driver with a GeForce GTX 560 Ti 280.26

  
  

  Any help will be appreciated

  Technical support Martrox

  We have been able to reproduce the problem and reported your steps in our Engineering Department.

  We will discuss the updates as soon as we have not.

  Preferences

  Audio output mapping on: Premiere Pro WDM Sound.

  The audio material value: Premiere Pro WDM Sound

  The ASIO value: speakers (Matrox WDM audio device THE)

  Reader: Reader of Matrox

  Table of mixing Windows - speakers (Matrox WDM audio device THE)

  Remote control audio/speakers/panel Matrox WDM set as default

  ASUS P5E Deluxe

  Driver RealTek SoundMAx 6.10.2.6585 latest driver for W7 64-bit

  MX02 audio driver 5.5.1.44

  the properties of the sequence:

  Sequence 01

  1920 x 1080

  00-03; 11; 02, 29.97 FPS

  48000 Hz - Stereo

  I've loaded a different sequence and changed Matrox settings accordingly. The problem remains the same.

  Sequence 01

  720 x 486

  00; 00; 00; 00, 29.97 FPS

  48000 Hz - Stereo

  1080 p 29.97

  Matrox AVI CODEC

  Type: MPEG Movie

  File size: 623,1 MB

  Image size: 1920 x 1080

  Frame rate: 29.97

  Audio Format: 48000 Hz - compressed - stereo

  Project Audio Format: 48000 Hz - 32 bit floating point - stereo

  Total time: 00:02:23:21

  Average: 4.3 MB/second

  Pixel format: 1.0

  Video shot on pixels Sony PMW EX1 Square Native 1920 x 1080 MP4 imported by PP CS5.5.2

  NVIDEA GeForce GTX 560 Ti

  driver 8.17.12.8026

  Latest updates of W7 installed

• LV fpga - wait express vi slows down the other loops?

  Hi all

  I have a question about the use of the vi wait Express in Labview FPGA. I use 2 loops, one that changes data, the other records it these data by sending it to a FIFO. In the first loop, I change the value of a variable named "CurrentWfmFast?" from true to false. After that, I use the vi wait Express to wait a few microseconds, so the program does not change this value to true immediately. In the second loop, I connect the data a FIFO to send to the host.

  If I now draw the variable in the host.vi, it seems that the value of the "CurrentWfmFast"? has changed AFTER the vi wait Express instead of before (see attachment).  If I change the wait ' (we) Pos Stable ' to 60000, for example, the value of "CurrentWfmFast?" changes after 60000 US... How is that possible? What is the vi wait another Express while loops influence?

  Thank you in advance,

  Best regards
  Dries

  

  

  I finally thought to it myself. Before that the value of "CurrentWfmFast?" went from true to false, the waiting already executed only once. That's why the value has not changed immediately. Instead of 1 wait, there are 2, that was my mistake.

  I know it has been difficult (if not impossible) for you to understand that without the whole project, but thanks for watching it. If I need more help, I'll post the VI or the entire project.

  Best regards

  Dries

• Cut the voice while listening to yet other sounds

  I have a clip where I speak, although there is music in the background.

  I want to cut my voice without having to edit the sound of music in the background. Is this possible?

  No, it isn't.  They must be registered separately to be adjustable individually.

• If you use SSD what size minimum, you can use I'll just install the softwar winds 7 operation and put all the other programs on a hard drive Sata is the way it should be done?

  I'm building a new PC, I have the motherboard and it has a location for an SSD, this who has the ability of minium are? and if this store just drive the sofware opererating only, as I intend to have all my programs and data on a SATA hard drive is the way to corect to go? Could someone ' a please advise please.

  The minimum I recommend is 80 GB, if you can go for 128 GB to 160 GB, I would go for it.

  Windows 7 uses 10 GB of disk space, and you have to take into account future, Service Packs and updates.

  You must also consider your page file size that will depend on the amount of RAM you have installed.

  Other disk space requirements include your programs and hardware drivers.

  The benefits of having an SSD is to accelerate the performance of the operating system and applications. In order to have a just installed SSD for upgrading the operating system on a mechanical HDD as well as your programs wouldn't make sense. Store content or data that you create on the HARD disk.

• automatic creation service_name to sleep while the other fails in standby mode

  Hello

  my environment:

  1 primary, standby active 2

  DataGuard without CARS

  Fast-start failover active

  DB 11 G 2

  I wonder how to solve the following scenario:

  Watch 'first' with noms_service 'first_sn' db fails.

  Watch 'second' with noms_service 'second_sn' db is still in place as well as the primaries.

  HOWTO manage creation automatic service_name on standby db 'second' due to the redirection of the connections client read-only?

  in other words, as soon as one of the eve broke down, the other waiting Gets the service name from the database failed, as in this example the

  Watch 'second' db would have these Service_Name:

  view the service_name parameter

  first_sn, second_sn

  Thank you very much!

  The trigger to start the service on the two standbys. The tnsnames would deal with the connection.

  http://docs.Oracle.com/CD/B28359_01/network.111/b28317/tnsnames.htm#NETRF262

  In light of what you really want you can avoid the trigger and use several address lists in your tnsnames file.

  Best regards

  mseberg

• Insert a Clip with/without moving the other layers

  Let's say that I want to insert video only to the layer 1 video and have it move the content of this layer to allow inclusion, but keep the other audio layers and the same video. Is it possible to do? What I did which is a pain is to heighlight all video clips 1, move them, and then drag the new clip in, then heighlight video clips 1 again and your choice. There must be an easier way.

  Thx for the help!

  Prevent changes with track lock

• Wall charger and connected all the time while listening to car

  Hi all

  I just bought a new Sansa Fuze 4 GB. I bought the player fuze mainly for listening to the car. I had planned to buy a car charger kit and the wall. My question is, I will damage the battery (performance and battery time must be down while listening to) if I leave the charger (AC or car) still connected while you listen. The "rocket" takes the power of the battery and the charger the battery charge or taking the rocket power directly from the external source (wall or car charger).

  Thank you for your answers...

  I always bring my rocket when im jumping in one card

  the battery is charging and the player works

  It means the battery is always ready

• stop ID10T users of abandonment downloads by shutting down the computer or put it to sleep

  Key issue:
  Short of locking all users of the computer, is it possible to use my admin account to stop temporarily to other users of the computer is shut down, put to sleep or into hibernation mode? At least until that I get home from work?

  Explanation:

  Normally, all users should be able to put the computer into standby or turn off the console. I want that way normally. However, I share the computer with other people in the House and must work full time, leave the computer unattended during the day.

  For the last three days, I tried to download a LARGE file from a slow server an approximate time of 6 hours. Oh, to add insult to injury I can't the server let me resume a download. To allow the user to get on the computer while I'm at work and by downloading the file, I used Fast User Switching (name of the XP, in case it's called something different to 7) to put the computer on the Welcome screen, while my regular account download.

  For the past two days, despite myself, leaving a note saying: 'Do NOT stop the computer or put it to sleep', when I got home from work, the computer was off, and the download was incomplete. I got an explanation "you were always telling me to stop when I'm done, I did not forget at this time." Then today I started downloading two hours ago and was only asked "could I please verify my email address?", so I donnГ the computer. When she was done, she put the computer to sleep, which was just as bad as l ' turn off as much as to cancel the download.

  Short of locking all users of the computer, is it possible to use my admin account to stop temporarily to other users of the computer is shut down, put to sleep or into hibernation mode? At least until that I get home from work?

  Hello

  
  You need to be logged in as an administrator.
  
  Follow the steps mentioned below:
   
  (a) open the Start menu, type secpol.msc in the search line and press ENTER.
  (b) to expand local policies in the left pane, and then select user rights assignment.
  (c) in the right pane of the user rights assignment double-click Shut down the system
  (d) select (highlight) listed (s) or group (s) that you will not be allowed to turn off the computer more and then click Remove.
   
   
  NOTE 1: You can press on and hold down the CTRL key to select several listed users and group.
  Click on apply.
  Note 2: Windows 7 Pro and Ultimate have secpol and gpedit.

• I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

  I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

  You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista. I shut down the computer?

  Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista.  I shut down the computer?

  Yes. Close and restart, the updates will catch up.

• Mysterious Thunder Sound while listening to music or just surfing the net

  Original title: mysterious Thunder Sound

  While listening to music or just surfing the net, this sound loud Thunder comes out of nowhere and it's scared the heck out of me when I least expect it. Nothing, I downloaded had this sound with it.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Try to check and clean the boot.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: To restore your computer to a Normal startup mode, follow these steps:

  a. click on start in the box start the search.
  b. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  c. under the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart.

  Similar problem: http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/f8d1eed4-e324-438c-8a81-31579009c5c8

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again. How do I do that? Thanks in advance

  I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again.  How do I do that?  Thanks in advance

  I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again.  How do I do that?  Thanks in advance

  First, make sure the taskbar don't are not "locked"...
  Right-click on an open space of the taskbar > make sure there is no checkmark at "lock the taskbar".

  Now, make a left click inside of a space open to the taskbar and HOLD > drag the slider down until he goes back down > drop PREY > lock the taskbar. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The sweet mouse bow and matching carbon ThinkPad Lenovo X 1. computer sleeps or shuts down the mouse is more matched

  Original title: Arcsoft mouse and Lenovo ThinkPad matching

  I recently bought a Lenovo X 1 carbon and it's running windows 7 pro.  I tried to pair the mouse Microsoft Arcsoft Touch with this laptop and it worked.

  Unfortunately every time that the computer sleeps or shuts down the mouse is more matched.  The only way I've found is to reconnect is to add it again as a new device.

  IT appears in my device as; Manager

  (1) HID device

  (2) mouse

  Neither gives me the ability to disable powersaving disconnect for this device (if it appeared in my Bluetooth radio devices I would try this)

  There must be a way to get the computer to recognize and default to this unit?

  Hi Jeff,

  Thanks for posting on Microsoft Communities!

  1. check the problem by plugging another Bluetooth device

  I suggest you follow the steps by Althaus responded on 30 October 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/why-Bluetooth-mouse-keeps-on-disconnecting-in/4d6587f2-A1E9-4486-8a1d-07299cc78d7c?page=1&TM=1428921131740

  Hope the helps of information. Keep us updated on the status of the issue persists. We will be happy to help you.

• The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.

  
  I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

  The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

  EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

  Thank you

  Ron

  Hi Ron,

  Can you please do the following?

  -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

  -Log on to the EM console, go to the homepage of the listener.

  -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

  -Ensure that the parameters, including the Listener.ora directory, are properly.

  Kind regards

  -Loc