Put edges highlight under the mouse cursor

Similar Questions

• DragAndDrop offer an easy way to put the image under the mouse while dragging?

  Hello
  
  Drag - move in javafx provides an easy way to put an image under the mouse when dragging?
  
  Thanks in advance,

  The demand for javafx 3 http://javafx-jira.kenai.com/browse/RT-14730 "drag view."

• do not move the mouse cursor

  Hi all. today I did something really stupid. I was in a chatroom without supervision earlier and another person and I'm in it and I could tell definently I makes him angry. I left the chat room and 15 minutes later im on another site and the cursor of the mouse is suddenly freezes and does not scroll on the page. everything else seems to work very well. so I restarted the computer, the mouse works when the windows password page appears, so I type the password and then loading this page and the home page comes (one with all programs, etc.) and appears as soon as that is when the mouse cursor freezes and not scroll or move. everything else continues to load and seems to work very well. If I restart the computer and put it in safe mode and the mouse works moves very well and everything. Anyway, the bottom line is I think the other person sent me a virus or something that is used to pass my cursor in normal mode. What should I do? also, I can't get the sound to work on my computer in safe mode. says low right volume icon ' audio service does not "and I want it running in safe mode, until I can get this cursor problem is resolved. any help is greatly appreciated and please explain in terms laymans, because I don't know anything about computers. Thank you very much for your time and have a great day.

  Hi crazyforfrance,
   
  As the mouse works properly in safe mode I suggest you try troubleshooting this issue with a clean boot to see if we can identify a program or driver causing the problem you are experiencing.
   
  A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:
   
  Clean clean boot.
   
  a. Click Start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  b. on the general tab, click Selective startup.
  c. under Selective startup, click to clear the load startup items.
  d. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  e. click OK.
  f. When you are prompted, click on restart.
  g. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.
  
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.
   
  Note: In safe mode you may not be able to hear the sound because the sound drivers and other drivers may not load and only essential drivers can handle, which are very important to run an operating system. and it's a way of diagonistic.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Problem of the mouse cursor.

  Original title: the mouse cursor

  The mouse cursor all the shadows

  Hi Burns,

  We would like to know more about details to help you better.

  (1) you earn in the shadow of the mouse pointer in your question?

  (2) don't you make changes to the settings of the mouse before this problem?

  (3) what is the brand and model of your mouse?

  (4) is it an external mouse?

  (5) is the limited issue of any document or a particular Web page?

  There is an option called Enable pointer shadow in Windows 7. The shadow of the pointer on puts a slight shadow under the pointer arrow mouse, which gives a 3D appearance and making it appear to 'float' above other elements on the screen.  This shade also makes it easier to find the pointer slightly colorful Web sites or programs.

  Write to us with details on the issue, so that we can understand the question better to help you.

• The mouse cursor disappears when iTunes movie go full screen

  This isn't a question... actually I found a hack solution to this bug and I wanted to share it with other people having the same problem.

  Since the upgrade of the OS X El Capitan, I'm having a problem with my cursor disappears randomly. It is very repetitive if I start a video in iTunes with the enlarged screen and the cursor disappears. Indeed, after entering mode full-screen, iTunes mask the cursor of the mouse that is predictable. The problem is that iTunes may not reappear there again once, for example, when I go to another office for a temporary job.

  Move the mouse does nothing, escaping mode full screen does not come back. It is very annoying. Like I had never had such a frustrating experience prior to a new installation of El Capitan 10.11.3 and update iTunes to 12.3.3, I thought that this is due to the update to iTunes. So, I made another new facility of El Capitan, this time without updating iTunes. But the problem still exists. It is interesting that I had this problem on my MacBook Pro 17 "end 2011 and not with my iMac 21.5" mid-2009!

  After a little research, I found that this bug is not because of El Capitan, and happened randomly in the other years dating back to Tiger and maybe before.

  Only new change I had made in my MBP Preferences system , was in the part of accessibility, and it was related to Zoom. I had always used this feature, but I put the Zoom Style 'full-screen'. This time (after the new installation of El Capitan), I had changed to 'Picture-in-Picture'.

  I changed the Style of zoom "full screen" even once, and the problem resolved.

  If this does not work for you, can be debilitating, other options, such as 'Use keyboard shortcuts to zoom' or 'Use of scrolling with keys of change to zoom movements,' can solve the problem.

  We all know that it is a bug, and he has been there for a long time. I found that many people had reported it to Apple, but the problem persists.

  For those of you who want to use the zoom "Picture-in-Picture" style, or set the zoom style full screen does not solve the problem of their mouse disappears, I will mention a few ways to recover the mouse cursor. The following solutions are applied to a mouse cursor disappeared after entering the movie to iTunes (or any other application) full screen.

  1. Move the mouse until the switching Office brings back the cursor. Now, you can switch the desktop computer and do whatever you want. (It's easier work, at least for me).
  2. Use Alt - Tab to switch to another program; This will bring the mouse cursor.
  3. Press Ctrl + F2 to activate the Apple menu. (You can also move your cursor away to top left and click to activate the menu.)
  4. Press Ctrl + up arrow (or swipe up with 4 fingers on the touchpad) to activate the control of the Mission.

  You can also find other ways to retrieve the cursor of your mouse.

  Hope this can help you with the mouse pointer disappears.

  In MBP El Capitan the pointer of the mouse is where you assign to ' picture in picture ' or 'full screen '.

  If you miss your mouse pointer, accessibility-> display "Shake mouse to locate" check to find your mouse pointer. It should be there.

  Note: you have posted in the discussion of the Mavericks, should have used the ElCapitan discussion...

• How to control the mouse cursor using EEG signals

  Hello world

  I am doing a project of cursor control using EEG signals. The idea is to find a way to all signals in a specific period of time in order to find the signal Ridge. Then, the highlight will be a parameter to control the position of a cursor.

  Can someone tell me the function that allows you to control the mouse cursor?

  I also found an old topic asking about it (http://forums.ni.com/t5/LabVIEW/Moving-Mouse-using-Labview/td-p/1285842) and I run an example of this link ( smercurio_fc) program. My cursor is stuck in the upper left corner of the screen, I can't control it again. Can you tell me how to run this program and to use the windows API?

  Thank you in advance.

  Sorry, but I can't do it for you.

  As I advised, you should take the free online tutorials. You clearly lacks the basic concepts of LabVIEW, as data flow.

  Things more: in your real applicaton does not use DAQ Assistant, screw Express are generally not optimal for data acquisition. It is safer and better use good DAQmx live. What is the equipment you use? Sampling rate, etc.?

  Why do you need to read data files? For testing? I thought that you will acquire data active, right? In your VI generate you some signals and write in a data file. Is this also for testing?

  There are several constructs in your VI which simply don't make sense.

  So again, I really suggest to go through online Core1-2 teaching material, which is accessible if you are a student, or if you have shared services provider license... It will really help.

• change the shape of the mouse cursor

  Hi all

  is it possible to change the shape of the mouse cursor?

  When I start my VI, the curosr takes form tha of the hand tool.

  How can I put it to the standard shape of the mouse cursor?

  Thank you

  Ritesh

  Try this.

• Is it possible to set the mouse cursor in the Xcontrol?

  

  In my Xcontrol, I want to change "the mouse cursor. But I found, I can only change the cursor in the VI, which contains my Xcontrol.

  An example: I edited the example labview "Dual Mode thermometer. In case of change of front/data, I put the cursor 2. but it did not work?

  Here is an example to change the cursor when the user points the thermometer

  This mouse enter for the class VI of VI of façade:

  

  I have a similar setup for the mouse event leave with the value 1.

  Tone

• The mouse cursor changes to hand instead of the text tool when I hover over the text.

  Normally whenever I have fly over the text in an e-mail or on the web, in order to highlight to copy and paste, the mouse cursor becomes a text tool.  However, now every time I have fly over the text, it remains on the hand tool.  Whenever I click on the mouse button, there just cause the hand to shake.  I can then move the page and everything I want to get off.  The only problem is, I want to highlight the text with the text tool, not handle the page with the hand.  My question is how to change the mouse cursor to get the text tool when it flies over text?

  Normally whenever I have fly over the text in an e-mail or on the web, in order to highlight to copy and paste, the mouse cursor becomes a text tool.  However, now every time I have fly over the text, it remains on the hand tool.  Whenever I click on the mouse button, there just cause the hand to shake.  I can then move the page and everything I want to get off.  The only problem is, I want to highlight the text with the text tool, not handle the page with the hand.  My question is how to change the mouse cursor to get the text tool when it flies over text?

  I wonder if this will help...
  Right-click on an open office space > Personalize > mouse pointers > pointers tab, click on use default > apply/OK

  t-4-2

• Is there a "shortcut" that will bring the mouse cursor to a position of 'home' on the screen

  We currently use Windows 7 and extended desktop in a dental practice that allows us to show images on another screen.  Often you "lose" the cursor on the screen when it is accidentally pushed above the extended desktop.   Y at - it a function that allows you to designate a «shortcut"that when pushed, will automatically return the cursor «before and at the centre"in the main screen?»   We already use it the function of 'location circles', but this is not enough in this situation.

  Thanks for your help, everyone.

  You can of course.  I adapted the instructions below on the following page:

  http://flamingkeys.com/2011/03/moving-the-mouse-cursor-with-Windows-PowerShell/

  And it works well.  Here's how.

  1. Open Notepad and paste these 3 lines.

     Add-Type - AssemblyName System.Windows.Forms
     $screen = [System.Windows.Forms.SystemInformation]: VirtualScreen
     [Windows.Forms.Cursor]: Position = '10', 10

  2. Save the file with a .ps1 name (it is a number at the end, not an I or L), taking care in the box save to select "all files (*.)" *)"in the menu file type to the bottom when you save it.  Example:
     

     You can save this file anywhere you like. I recommend your C:\ drive or something, because this is not the file that someone will actually use directly.  You must create a shortcut instead.  I'll assume that you have saved under C:\MoveMouse.ps1 for the rest of this post.

  3. On your desktop, do a right click and make a new > shortcut.  As the location of your shortcut item, use the following:

     PowerShell.exe c:\MoveMouse.ps1

  4. Right click on your newly created shortcut and go to properties and assign a keyboard shortcut.  I used Ctrl + Shift + M to mouse.

  That's all.  Now, whenever you press Ctrl + Shift + M, this script batch file executes and move your mouse to the location 10.10 on the screen (just inside the upper-left corner of the screen).

  Take advantage of :)

• Zoom hides the mouse cursor

  In Captivate, I added as well a zoom and a cursor in the same blade. The zoom area hides the mouse cursor, which is a problem because the idea of the zoom area has been to highlight mouse click! Yes, the mouse is above the zoom area.

  My idea is to have a small size video, with zooms on the areas I want to talk to.

  Hi again

  Okay, so it looks we are hurt to understand what you want.

  Initially, I assumed that you were unhappy that the width or the height does not reflect changes in the frame on the right for the same area.

  Am I right to say that you want to see the following behavior?

  Suppose that you have inserted a zoom area. The Zoom destination is located at 200 x 200 pixels. The Zoom area is set to 100 x 100 pixels. You change the area of Zoom 100 x 50 pixels (effectively reducing the width or the height of 50%. So, you want to verify that the Destination of Zoom is also affected by 50%. If the new Destination of Zoom and then automatically might change 200 x 100 pixels.

  What are you willing? If so, outside calculation methodically and configure manually, there is no way for that to happen. You (and those who want to achieve) must submit a form would ask.

  Until then, your best bet is to zoom in an image and not a region.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Turn the mouse cursor

  This only happens when I visit Facebook, but the mouse cursor turns and will not stop. Firefox will never block or unresponsive, but it behaves as if there is always from my PC 'think '. Any ideas on how to stop my cursor to turn constantly?

  
  

• The mouse cursor disappears on the address and search bars.

  In Firefox 10, the mouse cursor disappears from the address bar or the search bar after a certain time, or I guess that after visiting a site that I paste below. I don't see what part of the word I click on the address bar or the search bar for the correction because there is no mouse cursor. After clicking on tools and options cancel, the mouse cursor appears (I make no changes to the options) or when I click on customize in the navigation bar, then the icons I click on Cancel again without modification, and the mouse cursor appears again (as you can understand some trigger for windows option implementation even without change is done). I uninstalled firefox 10 just for this reason. Back to Firefox 9. Safe mode - same problem happens. So no problem addon. And the same thing happened in another operating system, so this isn't a fault of a facility.

  Problem solved for me in the last version of firefox v.10.0.1

• Bookmark shortcut does not work if the mouse cursor is focused in the version of the flash plugin.

  I tried to open the bookmark panel shortcut [ctrl + shift + B] buttons when the mouse cursor is focused with the flash plugin. But it does not open. But I clicked on the page and he's trying again, he opens the bookmark panel.
  Try the following link
  [Example: https://learnable.com/courses/a-crash-course-in-mobile-web-design-195]

  This may or may not be a problem.
  It's just a suggestion...

  This is a limitation of the works in Firefox.
  
  If a plugin is developed, which makes this shortcut key is no longer so he treats all keys work.
  
  You have to click outside the plugin, if you need to use a keyboard shortcut.

• Qosmio G20 - the mouse cursor freezes

  Play command and conquer tiberium wars a coupke of minutes in the game, the mouse cursor will feeze not allowing me to select units, etc.. I have to use Ctrl, alt, del to exit the game. This does not in all the other games that I used on the laptop. Is there something I can do?

  Details of my laptop are: the present report time: 24/03/2008, 09:49:38
  Machine name: YOUR-3CB2BF2DC5
  Operating system: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227 - 2254)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: Qosmio G20
  BIOS: v1.30
  : Processor Intel (r) Pentium (r) M 2.26 GHz
  Memory: 1024 MB RAM
  Page file: 508 MB used, 1952 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.2180 32 bit Unicode

  Hello

  If I understand your game freeze but who knows why this happen. As you can see it happen with this game only.
  Have you tried to delete this game and make new facility?