put itunes files back into itunes after external backup

Similar Questions

• File system for FRA and external backups

  Oracle 11g R2.

  The FRA drive is formatted using Linux x 83 put on Diskgroup + FRA system.

  Backups are stored outside on an ext3 file system.

  Suppose now the database gets completely crashed and I need to recover by continuing external backups.  I will copy the external backups to the + FRA disk and then perform the recovery from there.

  My question is, given that external backups are on ext3 file system, while the FRA is the Oracle ASM filesystem, there will be a problem for the use of the file systems of the two difference?

  Thank you

  Scott

  scottjhn wrote:

  To summarize the issue:

  In my system, the database will be on ASM disk group + DATA (disk1 disk2).

  I will use another disk, disk3 (ext3 file system) for FRA, to organize data files backups and multiplexed logs (archive logs, online newspapers and control files).

  Earlier you said "I'll use the + FRA (ASM disk group) for the fast recovery area that holds that archiving multiplexed logs, recovery online logs, and control files.»  Nothing else. »

  Now, I need one more place to hold the copy of the multiplexed logs.

  Wouldn't not on the same + (ABOVE)?  Alternatively, use a disk full-fledged, disk4 (ext3 file system)?

  Thank you

  Scott

  First of all, the reason for multiplexing online redo logs and control files is not the same as that of multiplexing archivelogs. Do it online and the control file are actually a part of the database.  The database will not work without them.  This is why it is so important to have multiplex.  Archivelogs, on the other hand, are part of your backup strategy.  The database itself really doesn't care if you have any archivelogs at all.  The archivelogs multiplexing is much less common.  I have never multiplexed mine, but I do not have a task that runs every hour to copy any newly created on a server off-site.

  If your database is on ASM, at least a control file and a member of each group of redo log must be in ASM.  Technically, is not having to be, but it's really foolish not to do so.  Where to put the second copy?  Probably several schools of thought on this.  If your FRA is on ext3, so it seems a simple decision... a FRA copy, a copy in its default location in ASM.

• HP compaq 15 h000na: can't get back into windows after installing windows 10 [attention] 8?

  Microsoft and hp did an automatic installation of windows 10 and that my old system was windows 8 Andi want to return because the internet explorer 11 is now 64-bit and Windows 8, it is 32-bit, this i where the problem is, a lot of sites do not support windows 10 due to the Explorer currently 64-bit, ibecause now I can't pay your bills online that's why I want to go back to windows 8 , but I can't because then installing windows 10 he has deleted all the files of windows 8 operating system and many other people are having the same problem, microsoft made a remote server to try to find the problem but after 4 hours, they told a lot of people have had the same problem and there was nothing they could do hp says the same thing, now, I thought that I or we had 30 to change my or our spirits come back back so why cant I go back, windows 8 has been preinstalled on my laptop to hp should have the windows software code 8 then why slope they send me this code so that I can have windows 8 , microsft also said that me [i] properly installed windows 10, once again why cant I return to windows 8 and b4 a replys I and the foregoing did all the tests on my laptop and the only thing that remains is for hp to reinstall windows 8 on my laptop, because I have to use my very old another laptop running xp to pay bills online , then what is the point of upgrading to windows 10 and having to use windows xp on old laptop and what was the point of buying me a new laptop last year

  I pressed the button for windows accecpt 10, but read all about it very carefully before installing and it asked to save all of my files that I made, microsoft and hp recommemed I installed windows 10 but you have 30 days to change your mind, windows 8 has been preinstalled and he warned an installation of usb media and says all the websites are supported so u take all this in any good faith, I'm not a super user just a plain person who wants to use his computer and when I want to and do not have all these hassle to write things up and find a hell of a lot of other people with eactly, same problem, microsoft installed a 4 hour remote to find if it was my fault or the fault of the laptop and found nothing and told me it was a problem with 10 windows and they said as a lot of others having the same problem where they cannot restore when they want too, if microsoft had said that there are a lot of sites supporting windows 10 then don't you think [IE me] would wait b4 I installed windows 10 also microsoft has in an email said to try to get these sites to upgrade why the fak must do this, like I said, I don't want all this crap I want to just turn on the laptop and use bloody like most people and not microsoft and hp did not force me but they recemended by e-mail and through my warranty upgrade so that was what I did the second , the only one the way back he semms is hp have my original numbers of windows software 8 not as I regis this sytem with hp, then u would have thought to email me windows 25 digits 8 none for me to install software, microsoft must make it clear that this windows 10 is not supported on the sites of somes and hounor cancellation of 30 days , and what is the bet that they contact me after 30 days and say oh u can't go back, but if you have done this or spoke to them u might have rollback, and this second would make it even more of a pain fffffff.

• can't get back into windows after a system restore

  I ran a system restore on my desktop running windows vista edition Home premium 64-bit. half way through my screan saver restoration opened and collapsed the restoration ended. After a few hours I shut down the computer. now when I start my pc it runs all preliminary functions and allows me to choose to either start windows failure, safe with fast back or normal mode. If I choose the mode safe mode (with or without back) through a loading phase where it shows everybody that it loads, it stops on a cdc.dsk file, and then processes to a black screan. If I choose load windows normally it goes to a black screan. the windows vista I have is one that came with the pc, so I don't have the disks to run. is it possible to fix this or did I just turn a pc $1500 in a very expensive papper weight?

   

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot ignore the titles back into music after iOS 10 update

  I'm having some trouble with the music since I installed on my iPhone iOS 10 6. I already posted something on my car stereo buttons to skip work only with my phone since I've updated, but now I also find that I can't always jump back from the beaches on the iPhone itself. To the front is very good but often jump backward going that far and no further, I am unable to jump to the first track played on my phone.

  No matter who else have similar problems?

  I found that a restore of my iPhone has solved this problem. At took forever but all (for) now hunky dory

• Incompatible control file and the data after the backup files

  The company that I work has servers where some components are new more, so have a backup in the event of hardware failure. If we intend to do some clones of 1:1 of the current servers to change them in case of emergency. As most of the necessary data is not volatile and we reset stuff in any case, there is no need of replicaton, replace an old version of the database works very well. Now we could not easily get substitutes for our old material, so we had to set up new machines. And that's where my trouble starts, because now I had to actually set up the system and the database rather than do a simple copy of byte to byte. I'm mainly a programmer, using Oracle of 'other' side, but as our DBA is yet to come and the work must be done now...
  
  So I did some reasearch and decided to do a normal backup of the cold. I have dumped the controlfile, copied data and configuration files to the new server and read the prompt SQL (no mistake there) control file. After some initial hiccups with the system (memory, etc.), I was finally about to start the database, only to get an error ORA-01190 ("1 database or control file is from before the last RESETLOGS").
  
  I guess I did is a bad thing when you restart the database (used the wrong part of the control file) or when the copy of the data. The original data have split two readers for simplicity and logical, I copied their entire contents. So maybe I don't not copied to little but too?
  
  As I said in the introductory paragraph, I'm not a DBA, but I'm willing to learn and listen. I don't expect a complete solution, but some guidelines when to look and what to avoid. Any help on this would be appreciated.

  Currently, there are some points need clarification,

  1. you don't need to re-create the control file, if you have a clean shutdown database and copied all the files at the same time (data files, control files etc.)

  2. If you stop DB, copied files of data but do not copy the control at shutdown file, you must re-create the control file.

  3. the error ORA-19909 suggested you resetlog prior to recovery.

  ORA-19909: string data file belongs to an orphan incarnation
  Cause: The data file specified has been restored from a backup that was taken during a period of time that has already been abandoned by a resetlogs operation or Oracle cannot identify what incarnation of database file belongs. The alert log contains more information.
  Action: Restore a backup of this file that belongs to the current or a previous incarnation of the database. If you use RMAN to restore, RMAN automatically selects a good backup.

  4. it would be better that again follow you from scratch the article.

  for example,.

  Copy the files you did copy over the data base to the bottom of the old server,
  modify the control file creation script

  RECOVER DATABASE USING BACKUP CONTROLFILE;
  ALTER DATABASE OPEN RESETLOGS;

• I want to save a file in photoshop to one but external backup, get pop ups saying write access is not granted or Volume misread me only folder to another volume?  Not understand.

  I want to save a file in photoshop on an external backup however, I keep getting pop ups read... not granted write access... .and read only the file volume to another volume.   Not understand.

  No one can tell you anything without the proper system or other technical details info. If there are questions of security and permissions, so anything that adobe can fix it for you. Start by reading this.

  Preparations for installation. Error postal codes of Mylenium

  Mylenium

• Cannot get permission to access some files restored from a windows vista backup

  Hello. I just installed windows 7 on a new hard drive. I bought the upgrade to windows 7 Home premium and I had to install vista on the new hard drive first then windows 7.

  I have all my files backed up on an external hard drive and I used windows vista backup and restore to do.

  I have now restored my files on my new hard drive using windows 7 backup and restore.

  I see all my files and folders, but the thumbnails are missing and when I try to actually open a file, a message informs you that I don't have permission to access.

  I tried to click with the right button on the files and changing the security, property, sharing and options, all to nothing does not.

  I tried a few ways to restore my files too, but nothing works.

  If I save a newly downloaded or created file (for example, a photo that I found on the internet) in the same folders, there is no problem and I can access, so the problem isn't that I don't have access to the records.

  Another weird thing is that I can access some of the restored files, but no more than them. I can't think what it is on those I can access that should make them different from those that I can't.

  So far it does not my simple PC! Can anyone help please?

  I should add that I am the ONLY user of this computer, and it is not on a network. Previously, it was the same when I am running windows vista. This is why I'm the only person who should be able to access the files.

  Same problem here after restoring a file backup of Windows Vista to a new installation of Windows 7. This solution worked for me: go to the command prompt, change the drive or a directory, you have problems with and type this:

  ICACLS * / reset/t

  Edit: You need to start the command prompt as an administrator to do. Find it in the start menu, then right click and choose 'run as administrator '. Then use the command as shown above.

• How much time does it take for my ipod to connect the itune after putting in disc mode?

  How much time does it take for my ipod to connect the itune after putting in disc mode?

  my ipod displays 'do not disconnect' for half an hour already, but my itune cannot always detect my ipod (as itune will pop up once I have connected my ipod normally).

  What is your real question?  Why you connect the iPod to your computer to disc Mode?

  In addition, it would be useful to know if you are using a Mac or a Windows PC?  If Windows, what version?

  If iTunes does not open automatically (when you connect the iPod), what happens when you run it manually?

• Not able to use iTunes after that put 12.3.3 updated

  Not able to iTunes after put 12.3.3 updated

  After installing update iTunes to 12.3.3 (after the prompt), I'm not able to use Itunes. When ever open in 10 seconds a pop-up message is displayed which says that itunes has stopped working. a problem caused the blocking of the program works correctly. Please close the program. two close options to obtain the program and the program to debug.

  Please help solve this problem

  Hello! Try the steps suggested here:

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  If you can't install or update iTunes for Windows - Apple supports

  I hope this helps!

• Why my iphone is required to connect to itunes after updating wireless.

  Why my iphone is required to connect to itunes after updating wireless?

  I don't have itunes and won't.

  Is there anyway around of this or take it back to the old ios?

  More than the upgrade of the air seems to have issues, whether all connect at the same time or other problems. I had to plug my phone into the computer, update itunes to the latest, published today, then ios upgrade 10.0.1 and it is fine now. You could bring to the apple store and probably use their computers, just don't tell the computer to trust the phone.

• Transfer iTunes to external hard drive

  I transferred my iTunes library on an external hard drive (Seagate).  I would like to transfer CDs to laptop so that I can do it again on one of my iPod tunes.  There is no option for ' send to ' iTunes from the external hard drive.  I tried several times and failed.  I can listen to the music stored on the external hard drive but playing something other than iTunes.  I installed Win 10 (big mistake, but too late now) so I guess it's to play through their music app.  I also tried to send to the device Bluetooth drive external hard, but that no longer works.

  I plan to replace my Samsung laptop with a Macbook Pro I hope in the not-too-distant future, but for now, I'd like to tell me if it is possible to transfer iTunes from external hard drive to my laptop existing back.  He drives me crazy not less because you have probably guessed I am somewhat of a technophobe.

  Thanks in advance.

  An iTunes library is an index of media stored on your computer that has been added to the library. iTunes has to know where the files are located in order to transfer them to your device. If the albums in question do not appear in your library and then use the menu file > add folder to library to add them, and then either make them slide to the device if handled manually on the base, or adjust the synchronization settings as required, and synchronize.

  See make a library of portable split to some general information about the layout of iTunes library. According to what you have copied where in the place where exactly, and what you see currently listed, you may want to shift-Start-iTunes and open the database stored on the external hard drive or maybe copy the whole folder iTunes from the outside to the inside, or you can create a library laptop from scratch on the outside, if there only your media.

  TT2

• Backup restore my files back after I reinstall my windows?

  Hello. I'm confused about backup. So - I backup my files, after that I will reinstall my windows. This backup will restore my files back?
  I know, I know, the answer is short, but I really need help!

  Tuesday, June 12, 2012 17:04:46 + 0000, PaulB.D. wrote:

  Hello. I'm confused about backup. So - I backup my files, after that I will reinstall my windows. This backup will restore my files back?
  I know, I know, the answer is short, but I really need help!

  Two points:

  1. make sure backup you on external media, not inside your hard
  drive. If you put the backup on your hard drive, reinstalling Windows
  will be their undoing. You can use CDs, DVD, thumb drives, or a
  External hard drive.

  2. you can use the Windows backup program to perform the backup, then
  use the same program to restore the backup files. Or you can use a
  third-party backup program; Again, use the same program to restore. If
  you do not have a lot of backup, you can even just copy the files to
  something like a USB drive or burn the CD or DVD, and then copy
  their return.

  Ken Blake, Microsoft MVP

• How can I keep my computer back to 'place' after that I put it manually using the 'list '?

  How can I keep my computer back to 'place' after that I put it manually using 'list '. There must be a master setting, but I was not able to understand it yet. I have to do this every time I open a file.

  I checked "remember to display each file settings" under "Tools - Folder Options," but it does no good.

  * original title - cannot set the defaults.* view

  Hey, Wesley!

  I tried some time ago, and it will do no good. I returned periodically to ensure that it was not unchecked, but he didn't.

  Someone posted a response that a registry key has been corrupted and offered instructions on how to fix it. I ran utility troubleshooting, but that has not helped and was about to try to change the registry, but the message seems to have disappeared.

  I tried to reinstall Windows on Windows, but the installation stalled after starting the system successfully. He must have done something right, because each window remains now as I put it, so my problem seems to have disappeared.

  Thanks for your interest. If someone asked me, I would recommend refreshing Windows to solve the problem.

  Best,

  Bob

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files