Incompatible control file and the data after the backup files

Similar Questions

• I have a laptop of gigabyte with win 7 home premume .it cant factory restore. I tried restoer in Control Panel and the recovery. but it is imposible.

  I have a laptop of gigabyte with win 7 home premume .it cant factory restore. I tried restoer in Control Panel and the recovery. but it is imposible.

  The control panel is not where you go to restore factory settings.  You should consult your computer user guide because the procedure is different for each computer brand and model.

  Good luck.

• I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

  I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

  I get the error message is could not reconnect account currently disabled mapped drive .so I remap the disk with the same user name and password and it reconnects

  * original title - Networking file sharing file sharing file sharing file sharing Fileshare discovery network shares mapped shared part readers *.

  Hi SCS PCs

   

  I would recommend checking the Microsoft TechNet community. Please visit the link below to find community which will support ask you in the right direction for the linked domain questions.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

   

  I hope this helps.

• Failure of the master node and the backup in VSAN 6.0

  Just curious as to what will happen to VSAN Cluster if master node and backup is omitted VSAN 6.0 cluster. Lets assume there are 10 esxi hosts in this cluster.

  It assumes that you implement a FFT = 2, which means all your VMS survive this double failure.

  Another host in the cluster will be the responsibility of the master, and the other will take responsibility of the backup.

  This may take a little longer than normal, as the new master and the backup to learn more about the configuration and rebuild the contents of the directory (that's what the backup node already for a quick conversion to master the master goes down).

  Other than that, affect without side effects.

• How can I access my computer in order to remove downloaded files that has not deleted using the control panel and the usual functions to delete?

  I recently received from remote assistance installed a new anti-virus program. During using the remote technician, I he observed several open windows because it deleted the files that were left by previous anti-virus programs on my computer.  These files prevent the download of the new program.  As I watched him navigate through my programs and files, I noticed that there are a lot of game files that have been deleted by using the functions of the control panel and uninstalling still in my computer.  The technician of 3-4 programs installed on my computer while he removed residual files of the antivirus and promptly removed from these programs when it was correctly installed my new anti-virus program.  I would really like to know how to access files or records what he did and then delete the game files that I thought were removed.  I downloaded at least 100 trial offers for sets of objects hidden over the years and you don't want no trace with my memory of the computer.  No help available out there?

  Hey,.

  You can follow this link to recover lost or deleted files:

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

  also, look for the file/game:

  http://Windows.Microsoft.com/en-us/Windows-Vista/save-your-search-results

  Hopefully this should help you.

• MCBUILDER. EXE running rampant, competing with updates for CPU and possibly associated with an update failed chess SP2 and the backup and restore

  Running Vista Home Premium SP1 and the system has been slow and freezing. MCbuilder appear to be using 50 to 100% of CPU, and it is a process that seems no way of killing. I disabled in Services, but again, it seems to start without any particular reason and hinders attempts to install programs or updates vista hogging resources. This can be associated with a problem that has arisen since June because I am not able to perform backups or set restore points (gives the error "0 x 81000101 the creation of a shadow copy has timed out"). I tried to install SP2 in the hope that it will not solve the problem, but the failure of installation and install KB947821 doesn't seem to work either. As the restoration of the system is defective, I would be grateful for the pointers to the resolve or completely remove this mcbuilder problem.

  You have COMODO or AVG Antii-virus installed on your system?  It is known problems with these two programs and MCbuilder.exe.  I don't have Microsoft Resource Builder Cache as a service in the Services (so I can't activate or deactivate it)-you which version of Vista to help (bit, SP-number version)?  I have 32 bit Vista Business SP2. I see no way to turn it off in order to close it with the Task Manager when it is - with the exception, but who could become annoying if it happens frequently and with multiple instances.  I could find nothing useful in Knowledge Base Microsoft on it hogging resources although I've seen a few threads using Bing (which is where I came up with COMODO and AVG anti-virus conflicts).

  You can be infected by malware (which may be the origin of the program to activate and run "without reason"). While in Test Mode safe mode (press F8 during startup and select mode safe mode with networking repeatedly) to run anti-malware programs. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after finishing all the scans and see if the problem has been resolved.

  Try a system restore to a point in time BEFORE the problem started (which can be a problem if it began all the way back in June - you should have posted here then when this process would probably have worked).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points (but I doubt that you will have a pretty far back and forth to the system restore may not be a viable option).  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  I bet there is something involving the program or associated with this program.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

  I hope one of these procedures can solve your problem (probably the SFC command or controls anti-virus).  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  BTW, for update of the problems you are having with SP2, post on the Forum of Windows Update to: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in update issues will be happy to help you with your concerns and get SP2 running on your system (perhaps despite this particular problem).  As you say, it can even solve the problem - who knows.

  Good luck!
  Lorien - a - MCSE/MCSA/network + / A +.

• Windows 7 backup and restore shows no internal hard disk and the backup location option

  Windows 7 backup and restore is only the possibility to go back to D drive which is a burner DVD C and F is both internal and external hard drives C is the system drive and F is a newly formatted 1 TB drive free. I access F in Explorer windows without any problems and I would use it for backup.

  Hi dairy Tech 2000,

  Welcome to the Microsoft answers site.

  Drive/C: would not be shown to the backup files since this is the system drive. You cannot save files to C:/drive to C:/drive.

  However, when you change the backup settings to another drive on the computer, follow the steps below:
  1. click on start.
  2. backup and restore type of search.
  3. click on change settings.
  4. This will show the drives internal i.e. your F: drive / on the computer.
  Now you can set the location of drive F:.

  Learn more about the backup from the links below: back up and restore: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Back-up-and-restore-frequently-asked-questions
  Backup your files: http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
  Set or change automatic backup settings: http://Windows.Microsoft.com/en-us/Windows7/set-up-or-change-automatic-backup-settings

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• content and the backup database

  How can I backup my database and the Web site content? Can I configure scheduled backups?

  Hello

  BC is not a tool of backup schedule.  How you will back up data is to follow the migration article.

  - http://kb.worldsecuresystems.com/203/bc_2038.html

  Please note BC keep a daily backup of your site, but is only a restoration of disaster recovery (system failure, etc.).

  Kind regards

  -Sidney

• IM always get "low disk space" and the backup file always fails and recovery D

  always get low D recovery and backup disk space the files always cleaning disc fails is no help either

  You are NOT supposed to file backups on ypur recovery Partition D.

  Your recovery partition D is implemented by the manufacturer of your computer in the event of serious problems in your system.
  You use it to restore your system.

  You are NOT supposed to touch it... to not add anything in it or remove anything from him.

  You call the manufacturer of the computer, tell them the situation...

  1. ask for a set of recovery DVD, if you don't have a game yourself. The game is essential to restore your computer in case where it breaks down, and you screwed up the recovery partition which is unusable for recovery.
  2. ask to talk to a technician. Ask the person how to remove backup files or elements that are NOT supposed to be there.
  They, the manufacturer of computer created the recovery partition, they know how to take care of it.
  Let them teach how you to.

  Buy an external hard drive and use it for backups of the file *.

• I get a blue screen says bug code using the driver. and the backup file. I don't know what to do and my computer no longer works. I have windows vista

  blue screen, error message bug code usb driver and file dumping crash how to stop it

  Hello

  1. what changes have been made to your computer before the problem?

  I suggest that you follow the steps in this article and see if the problem still occurs.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Valid also for Windows 7 steps)

• I am a new user of iPhone. My iPhone 6 s screen does not turn (the home screen and the screen when you use all the apps). My lock screen switching is disabled, the control center and the zoom is off too. What can I do now?

  Rotation screen IiPhone 6 s problem

  Have you tried to force the reboot of your iPhone?

  First of all, try to force your system to restart.

  • Force reboot your device will not erase the content currently on your device.
  • You can force your device to restart even if your screen is black or do not answer your buttons.

  Press and hold the sleep/wake and home buttons at the same time for at least 10 seconds until you see the Apple logo.

• How to work the optimization backup and the backup retention period?

  I'm a little confused on how these 2 features will work together.
  
  Incase I enabled optimization backup and have retention backup value someday. Then I have this tablespace 'users', which is read-only. Please let me know if my understanding is correct.
  
  Date................ Action................................ Backup
  -----
  Monday... Full backup... 'users' saved
  Tuesday... Full backup... 'users' unsaved
  Wednesday... Delete Obselete... backup 'users' deleted
  Thursday... Restore database...?
  
  I was wondering if at Thursday I'm still able to restore the database if tablespace 'users' are deleted?

  Hello;

  Someday - the retention value, it is much too low. You may lose more than your example of demand. Set the highest. (Start with 2 or 3 and test, test, test)

  How backup works of optimization in what concerns the retention policy?

  RMAN only works with files during the retention period.

  For example, consider a backup optimization with a retention period of 5 days.

  RMAN will only compare the data file with backup within the period of 5 days games - even if the data file it as backup has not changed in this 5 days.

  So be very careful. Given your political retention is so low, I would not use optimization.

  I was wondering if at Thursday I'm still able to restore the database if tablespace 'users' are deleted? Very good luck, you will lose data.

  Test your period of detention inside and outside before look you at optimization.

  Best regards

  mseberg

• How to recover data after restoring backup

  How can I recover my data (between 16 Feb to Apr 16) after I restored (backup-jan'16) wrongly?

  You have a backup of a date later than the 16 Jan that may have data between Feb and Apr?

  If so, restore that backup. What is an iTunes backup or a backup to iCloud?

• Search based on the start date and end date

  Hello
  
  I added two fields "Start Date" and "End Date" on a search page.
  I did the VO extension also.
  Now, I have to implement the logic of the search to get all records created between' start' and 'End Date' after pressing the "GO" button on this page.
  
  Can someone please provide advice to extend the controller.
  
  Thanks in advance.
  
  
  Gaurav.

  I think that the path would be

  Import oracle.apps.per.common.webui.PerTransactionTopCOImpl;

  Thank you
  -Anil
  http://oracleanil.blogspot.com/

• The effect of ICT controls runs off the screen and the chronology of control carried out does not follow

  I'm working on a video where I need to change the image very close key pairs. But it seems that ICT is running off the screen and does not follow along as the ICT in the project timeline.

  How can I make the effect controls, ICT and the timeline synch upward? I can use previous and next keyframes, but the view of the timeline does not follow along. He made the process quite slow editing because I have to constantly to the scroll box allows to adjust the view manually.

  There is no option for this scroll.  You will need to zoom out.