put the button (and pop-up) to forward to the reversal
I use button symbols to create pop ups on turnover (by pasting the box pop into their rollover State)
However I need a way to put the buttons in the front when I rollover them because the pop up overlapping the other buttons.
Irealise this question has been asked before, but I am very new to as3 and I find it difficult to adapt responses to my code.
I am very grateful for any help
Ben
var buttons: Array = [btn1, btn2];
function moveFront(event:MouseEvent):void {}
go to the code before
}
for (var i: uint = 0; i < buttons.length; i ++) {}
buttons [i] .addEventListener (MouseEvent.ROLL_OVER, moveFront);
}
:
var buttons: Array = [btn1, btn2];
function moveFront(event:MouseEvent):void {}
event.currentTarget.parent.addChild (event.currentTarget);
}
for (var i: uint = 0; i
buttons [i] .addEventListener (MouseEvent.ROLL_OVER, moveFront);
}
Tags: Adobe Animate
Similar Questions
-
In the latest version of MF, there is a missing button, who was in the previous version: between backward/forward buttons and the bar hits there was little flash, who showed a few recent pages I just went through. How can I restore it?
If you mean the drop marker so you can always get history buttons front and rear, if necessary by left clicking and for a second, or by right-clicking on them.
If you want to continue the brand drop there too there is that Extension to https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
Also the abbreviation for Firefox is Fx
-
I have a computer laptop lenovo, but a red cross that pop up on the volume button and it, s say no audio device is intall
I want to know how can I solve this problem
The following link might be worth a visit:
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
(Win XP / Vista / 7) -
Moose title: How can I get the age of Mythology to work on windows vista
every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer
Hi rew55545,
(1) is this problem limited only to the age of Mythology disc?
(2) what version of the game you are trying to install?
Method 1: Run the fixit available in the link below and check if that makes a difference
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2: run the fixit available in the link below to resolve any problems with DVD player.Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
Once again microsft 7 uninstall and reinstall problems Impossible to uninstall to reinstall it says error language does not support my system... then if I try to put the disc reinstall it says error during installation and just one button close... help
Please repost your question in the section group of Office documents Word to: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.word.docmanagement&lang=en&cr=US where issues of speech specialists will be more than happy to help you with your problem.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switching autour.
If you have symbols of button on the stage to the next and previous, each of these symbols has an instance name with a listener event attached to it. The event listener is linked to a mandate. You can have a single event point to a function. So for example, if you have a next button and a click event that points to a function that says something like nextFrame(); and then you want to use the next button to point to a function that says something like nextScene(); you will need to use another instance of this next button and have this different instance to use a different event handler to point to a different function. Who help me?
-
Message "Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now, I'm putting the button in Photo Shop (banner) in. I pull down on the file Photo Shop button instead and try to select the Banner.psd file. Unfortunately all of the (active) folder is not accessible to all. One is not visibel. Please - need some help here. Thank you.
@Ach ja, meine Muttersprache ist Deutsch
You must use the file > Place Photoshop button (Cmd / Ctrl + B).
-
I uninstalled and re installed and same even used a different installation file that it installed well on laptop had to go back to firefox 3. something until someone can tell me what is wrong
A combined Stop/Reload/Go button that is placed at the right end of the address bar is used in Firefox 4.
During the process of loading page it shows as a stop button and once the charging button is replaced by a reload button.
If you type in the address bar this button would then become a button go.
You can middle - click this button Reload to duplicate the current tab in a new tab.
---
You can find the button at the right end of the Navigation bar.Open the Customize via "view > toolbars > customize" or "Firefox > Options > toolbars."
Drag the home button from its current position on the right to the previous position to the left of the address bar.
- Drag the buttons Reload and stop at their previous position to the left of the address bar.
- Set the "Reload - Stop" order for a combined "Stop/Reload" button.
- Set the order of 'Stop - Reload' or separate them otherwise to get two separate buttons.
-
When I go to the right of my Start button and try to Hibernate, sleep, or shut down my computer, all the buttons are gone. Now, I don't see that "change of user, logoff or lock. Now, in order to stop, I have to go to the Start button and to the right, the trunk, which brings back me to a screen to logon with a red box and an arrow at the bottom right of my screen. It of only then when it allows me to shutdown my computer. Can anyone help.
Hello
How to remove or display the Start Menu in Vista shutdown Options
http://www.Vistax64.com/tutorials/105003-shutdown-options-start-menu.htmlButton missing in the Vista Start menu
http://www.Visser.com.au/blog/missing-shutdown-button-in-Vista-Start-menu/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How do I put the buttons at the top and bottom of a page
Hello
I have a requirement that each of the 4 buttons be placed at the top of the shape and the bottom of the form as well. As I tried, I could not find a way to do it. I use APEX 4.2.2.
The layout of the page is / < should be > as follows:
Area of the header
-various Articles
< buttons should go here >
Region 1
-various Articles
Region 2
-various Articles
Region 3
-various Articles
< buttons should also go here >
Currently I have buttons in a region called the buttons after the region 3. I tried to place 1-3 areas in my region of buttons (buttons has been defined as their parent region) and then set the property position button up and down, but that just gave me 2 sets of buttons with nothing between them (regions 1-3 should be between them). The point of view of each of these regions is body of model Page (3)
So, how can I address my page have two sets of buttons, as shown above? I know there is a much better way than to create a new set of buttons with dynamic here of actions/process/validations/etc.
Thank you very much for your help!
Jason.
EDIT: The theme has been applied to this app is a custom theme that was created by the theme of Cloud applications.
jason02 wrote:
Cloud Apps is theme 101. My area of container using the model 'Button region Untitled' and the HTML in the definition is:
#BODY #.#CLOSE # PREVIOUS # ##DELETE NEXT ##EDIT ##CHANGE # CREATE # CREATE2 # EXPAND ##COPY # HELP #. This is going to sound strange because you want to display buttons, but the region without title button model is not appropriate for what you're trying to do (it is designed to display buttons in positions defined by the chains of substitution in support of button cell). Stranger still, in a theme derived from issue 20, the best model in the region for a container's region without buttons and title. That this legacy theme uses HTML tables-based layout, the jQuery selector that is required in the JavaScript code is more complex:
$('#container_body td.t20RegionBody:first') .append($('#container_body td.t20RegionBody:first table:first'))
-
using the key to toggle the button and retain a mechanical Action
I'll put in place to control the race of a stepper motor and I have 2 buttons for jogging forward and backward to jogging. These buttons have the mouse down and mouse events sends commands to the motor controller. The mechanical action of the buttons are set to release the latch.
I would also use the previous Page and Next Page on the keyboard to toggle these keys. But I would like the button to act in the same way that the mouse when the button is pressed and held the button remains pressed and released with the release of the key.
However when I press on and press and hold the button continues to activate / deactivate. Is has something to do with the repeat button, but I don't know how to operate it. Any advice would be appreciated.
I've attached an example of how I started. The mouse down press the reverse button opens a dialog box, but the key does not work and when the key is held down the button flashes. Page Up for forward and Down to the opposite Page.
Concerning
Terry
Simply use another event and manages press button from the bottom to the top in the same way. The button using local variables while active, you can switch to event.
I don't know why you use latch action. Why not with the button until this that released and value change events?
-
I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?
I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?
Hello
Go t the location where you want to create the new folder, right-click and select new/folder. Name the folder.
Go to where the files, select the files and then use the right mouse button to drag the files into the new folder. When you drop the file, a pop-up menu, select the Move option.
Let us know if you have any other questions.
Thank you for using Windows 7
Ronnie Vernon MVP -
Hand cursor on the 'Next' button and text caption error reversal
I have a template that I have to respect. It has buttons back and forward with a stationary state.
I need an on-screen text entry field to simulate the text before the user in a form field.
If you click on the next button and the field is empty or incomplete, I want an error message to the pop-up window. If the text box is filled correctly the next button moves to the next slide.
Unfortunately, I need BOTH the hover state and hand the cursor on the next button.
Ive tried a few scenarios and here is an example of one:
-Add a text entry and remove text entry button
-Add the text caption called errorMessage
-create the variable called nextButtonIncrement
-create a conditional action called checkTextCaption to run at the entrance to the screen
-button next increment of 1 when you click
-action checks to see if the button is a literal 1 or more, and if a legend of appropriate literal text (i.e. text).
-If true, go to the next slide
-If false to see the error message
The problem with the above is that the error message appears when you enter the slide. I just want that it is displayed when the user clicks Next AND the legend of text entry doesn't have a MESSAGE in it. Im trying an AND OR a conditional action, but I am, I was wondering if anyone knows if I'm wasting my time or not.
Looks like you're on the right track, but you have debugging in the details.
Your back and next buttons must be advanced a conditional Action running that first checks the current value of the variable associated with ETB to check that it is not empty before performing their assigned back or other action.
Each TEB inserted into a default Captivate project will also be a user created variable that has the same name as the name of the ETB (let's say for now it is called var_TEB). As soon as you start typing the text in the TEB, the associated variable is assigned to have the same value (combination of keys for typing).
Now if you want conditional action to ensure that the BER has a value before you move to the next or previous slide, then you must also create a user variable and NOT add a default value. You will use this empty variable (we'll call it var_NULL) in your condition of conditional action.
If your condition will be errorMessage SHOW something ELSE looks like IF var_TEB is not equal to var_NULL then go to the next slide (or previous page depending on whether it is the button Next or Back you use). (Make sure you have the errorMessage value variable is NOT visible in the output, otherwise it will be visible as soon as your timeline starts.)
If the condition is to ensure that the variable associated with ETB is not empty before running the jump to slip, it will SHOW you the legend of hidden error message.
-
Hello
I'm totally green in web development.
My goal is, to the user will enter a range of dates of and to and will be out to put the records in the intranet when they press a button.
However, the good news is: I have experience in programming. I wrote in VB desktop applications > NET and I am aware of the RDBMS SQL concepts.
But CF and WEB development is new to me.
My current projects involves the DB connection and test it. (it works fine)
And the output of the reports to an intranet page. (records)
I need help on how to start this as soon as possible. I'll even do some practice at home.
Tools, I have to work
• Development server (test)
• Place of origin.
• Toad for db connection.
• Html reference guide
• Cf dummies book.
How can start my projects.
(e.g. Create cf, outputpage?)
seriously, I'm new on this.
Thank you.
has expired and I lost everything! Thanks for your efforts.
See. I'm really new to this.
I wanted to start the practice of home.
Well, if you find some timePOP me an email?
great!
[email protected] -
Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!
Marley6921 wrote:
Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!
Put it on wait ten minutes if the phone did not come one, then hold down the sleep/Home button until you see the apple logo and then release, make sure that the phone is still connected to the charger.
Maybe you are looking for
-
Time-out in the structure of the event
Hello I try to configure the time-out period in the structure of the 5s event using the loop, as shown in the picture as an attachment. The problem is that this time-out event occurred only when I code debugging and does not happen when I run the sam
-
Windows XP is missing Normaliz.dll still boots and loads the shell perfectly.
I tried to run a piece of software when I noticed that it wouldn't start. He could always back "cannot locate the Normaliz.dll. Reinstall the application might solve the problem. ' So I did, more than 15 times. Nothing, so I watch system32 and ente
-
Failed to create the system repair disc
When I click on 'create a repair disk' in 'Back up or restore your files', a window (insert a blank disc) flashes for a moment followed by the message "Windows repair disc has stopped working, check online for a solution and close the program or"clos
-
How to remove drive D attributed to DVD burner and it assign to another HD partition?
Hey guys,. I have Windows 7 Home Basic pre-loaded with Acer laptop. I bought a custom software for my needs. This software needs all the "C", "D", "E" drive &. Currently my "D" drive is assigned to the DVD recorder. My other discs are E, F & G. is it
-
Tried to use the Redemption Code - go to the download and Page not found
Just bought Adobe Photoshop elements 14 Best Buy. Came home and implement Adobe ID. Went to redeem with the code and he agreed, but when I try to download it says: Page not found. I read the forum and tried another link - same result. HELP PLEASE