puzzled on the errors of export...

Similar Questions

• When you export files, I get the error message: "Export is not possible..." »

  When you export files, I get the error message: "Export is not possible, an internal error has occurred: error Win32 API 2.» The system cannot find the specified file... The photo is indeed exported correctly, the error message is always and must be confirmed by "OK". The old version of LR had the problem, not only again 5.7.1 (5.5 there)

  In the "Post processing" section at bottom of the export dialog box, change the selection labeled "after export" of blank (no chosen selection) in the selection of actual 'doing nothing '.

  See this thread for more details: error after you have completed the export of JPEG

  Mike

• Get the error when exporting

  Hello friends,

  Please help me...

  When I export data or selecting data by selection for a particular table statement then I get below error...

  Wed Jan 11 04:42:43 2013

  Thread 1 Advanced to record the sequence 924 (switch LGWR)

  Currently Journal # 3 seq # 924 mem # 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\10G\REDO03. JOURNAL

  Wed Jan 11 22:00:12 2013

  Met GATHER_STATS_JOB of errors.  Check the trace file.

  Wed Jan 11 22:00:12 2013

  Errors in the e:\oracle\product\10.2.0\admin\10g\bdump\10g_j000_8952.trc file:

  ORA-01115: reading block IO file error 1 (block # 62905)

  ORA-01110: data file 1: ' E:\ORACLE\PRODUCT\10.2.0\ORADATA\10G\SYSTEM01. DBF'

  ORA-27091: unable to queue I/O

  ORA-27070: async read/write failed

  OSD-04006: ReadFile() failure, unable to read the file

  S/O-error: incorrect function (OS 1).

  My version of DB: - Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi

  Thank you

  Hello

  First of all I would like to know have many blocks are corrupt - you can do this with rman (even if you do not use for rman backups).

  Just run

  RMAN target = /.

  This will connect you to the database (make sure that you are logged in as a user who is in the dba/ORA_DBA group)

  validate the database logical verification;

  This will check the whole database to see how many defective blocks you.

  Then report...

  See you soon,.

  Harry

• The Error Message exporting...

  I'm trying exprot VMs and everytime when I exprot, I get this error - message & gt; Can't export the virtual appliance: I/o error has occurred. Anyone know why this message pop up?

  Please describe what you do a little more in detail.

• error when exporting large report on the PDF in OBIEE 11.1.1.6.12

  Hello

  We have great report should be exported to PDF, I have change some setting like below:

  In the Config.xml file that is located in \BI_Home\instances\instance1\config\OracleBIJavaHostComponent\coreapplication_obijh1\, change

  < XMLP >

  < InputStreamLimitInKB > 32768 < / InputStreamLimitInKB >

  < ReadRequestBeforeProcessing > true < / ReadRequestBeforeProcessing >

  < / XMLP >

  in xdo.cfg, replace

  < property name = "system-temp-dir" > c:\temp < / property >

  the correct path

  After this adjustment, I am able to export reports to PDF, but the records of more than 10000, it throws the error in sawing:

  [2015 03-27 T 10: 51:29.000 - 04:00] [OBIPS] [ERROR: 16] [] [saw.rpc.mis.read] [ecid: 6314d6274a0b62d0:3aa2f498:14bec1dc796: - 8000-0000000000048471, 0:1] [tid: 2312] RPCServer returned an error: error when running PDFRpcCall.processMessage

  oracle.xdo.XDOIOException: com.siebel.analytics.utils.InputStreamWithLimit$ ReadOverTheLimitException

  at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1065)

  at com.siebel.analytics.web.javahostrpccalls.xmlp.XmlpAbstractRpcCall.processMessageInternal(XmlpAbstractRpcCall.java:71)

  at com.siebel.analytics.javahost.AbstractRpcCall.processMessage(AbstractRpcCall.java:251)

  at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:193)

  to com.siebel.analytics.javahost.Listener$ Job.run (Listener.java:223)

  at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:207)

  to com.siebel.analytics.javahost.standalone.SAJobManagerImpl$ 1.run(SAJobManagerImpl.java:155)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: com.siebel.analytics.utils.InputStreamWithLimit$ ReadOverTheLimitException

  at com.siebel.analytics.utils.InputStreamWithLimit.incTotalBytes(InputStreamWithLimit.java:58)

  at com.siebel.analytics.utils.InputStreamWithLimit.read(InputStreamWithLimit.java:49)

  at java.io.BufferedInputStream.read1(BufferedInputStream.java:256)

  at java.io.BufferedInputStream.read(BufferedInputStream.java:317)

  at oracle.xdo.common.io.FileUtil.writeLargeFile(FileUtil.java:75)

  at oracle.xdo.template.FOProcessor.xmlDataSave(FOProcessor.java:2229)

  at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1050)

  ... 7 more

  [[

  Leader: RPC.cpp

  Online: 473

  Geographical area:

  Saw.RPC.mis.Read

  Saw.Subsystem.Portal.pdf

  Saw.httpserver.ProcessRequest

  Saw.RPC.Server.Responder

  Saw.RPC.Server

  saw.rpc.server.handleConnection

  Saw.RPC.Server.Dispatch

  Saw.ThreadPool.socketrpcserver

  Saw.threads

  SessionID: 6hj63tlcl14h5jfa8m9dacbmgea1frjsndqc6ta

  AuthProps: AuthSchema = UidPwd | PWD = * | UID = wei | User = wei

  ECID: 6314d6274a0b62d0:3aa2f498:14bec1dc796: - 8000-0000000000048471, 0:1

  ThreadID: 2312

  HttpCommand: go

  ]]

  [2015 03-27 T 10: 51:29.000 - 04:00] [OBIPS] [ERROR: 31] [] [saw.rpc.mis.read] [ecid: 6314d6274a0b62d0:3aa2f498:14bec1dc796: - 8000-0000000000048471, 0:1] [tid: 2312] a fatal error occurred during the processing of the request. The server responded with: com.siebel.analytics.utils.InputStreamWithLimit$ ReadOverTheLimitException. [[

  Leader: RPC.cpp

  Online: 479

  Geographical area:

  Saw.RPC.mis.Read

  Saw.Subsystem.Portal.pdf

  Saw.httpserver.ProcessRequest

  Saw.RPC.Server.Responder

  Saw.RPC.Server

  saw.rpc.server.handleConnection

  Saw.RPC.Server.Dispatch

  Saw.ThreadPool.socketrpcserver

  Saw.threads

  SessionID: 6hj63tlcl14h5jfa8m9dacbmgea1frjsndqc6ta

  AuthProps: AuthSchema = UidPwd | PWD = * | UID = wei | User = wei

  ECID: 6314d6274a0b62d0:3aa2f498:14bec1dc796: - 8000-0000000000048471, 0:1

  ThreadID: 2312

  HttpCommand: go

  In addition, we have already set in configuration in insatanceconfig.xml for report export to excel that has no problem:

  < ResultRowLimit > 300000 < / ResultRowLimit >

  < / ODBC >

  < views >

  < Center >

  <! - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control - >

  < DefaultRowsDisplayedInDelivery > 2500 < / DefaultRowsDisplayedInDelivery >

  <! - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control - >

  < defaultRowsDisplayedInDownload > 200000 < / DefaultRowsDisplayedInDownload >

  <! - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control - >

  < DisableAutoPreview > false < / DisableAutoPreview >

  < > 1920000 MaxCells < / MaxCells >

  < MaxVisibleColumns > 5000 < / MaxVisibleColumns >

  < MaxVisiblePages > 2500 < / MaxVisiblePages >

  < MaxVisibleRows > 500000 < / MaxVisibleRows >

  < MaxVisibleSections > 5000 < / MaxVisibleSections >

  < / Center >

  < table >

  <! - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control - >

  < DefaultRowsDisplayedInDelivery > 2500 < / DefaultRowsDisplayedInDelivery >

  <! - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control - >

  < defaultRowsDisplayedInDownload > 200000 < / DefaultRowsDisplayedInDownload >

  < > 1920000 MaxCells < / MaxCells >

  < MaxVisiblePages > 2500 < / MaxVisiblePages >

  < MaxVisibleRows > 500000 < / MaxVisibleRows >

  < MaxVisibleSections > 5000 < / MaxVisibleSections >

  < /table >

  < cube >

  < CubeMaxRecords > 500000 < / CubeMaxRecords >

  < CubeMaxPopulatedCells > 500000 < / CubeMaxPopulatedCells >

  < / cube >

  < graphics >

  < MaxVisibleColumns > 5000 < / MaxVisibleColumns >

  < MaxVisiblePages > 2500 < / MaxVisiblePages >

  < MaxVisibleRows > 500000 < / MaxVisibleRows >

  < MaxVisibleSections > 5000 < / MaxVisibleSections >

  < JavaHostReadLimitInKB > 10240 < / JavaHostReadLimitInKB >

  < / charts >

  < / views >

  Someone knows if I get bored always something here?

  Thank you

  Check this Doc ID 1567582.1

• On a Mac ios10.10, using the online service export to PDF format, an error message appears, "year error occurred while trying to access services."

  Can you advise steps I might take now?  On a Mac ios10.10, using the online service export to PDF format, an error message appears, "year error occurred while trying to access services."

  Hi Ringdoc,

  Please see this: "Error has occurred when trying to access this service" when you sign in to Acrobat.com

  Let us know how it goes!

  Best,

  Sara

• Error - "file write failed" at the stage of export in FDQM

  Hi all
  
  We are working on the integration FDQM and HFM.
  We have completed the import, validation and Export step in the FDQM application. But when you try to view the file after the export step, we receive the error "writing on a file has failed.
  In addition, we are unable to see the data in the end HFM. Please advice.

  I do not exclude a security problem. The files imported and export files go to different directories that may have entirely different permissions set. (by default they must match, however).

  In addition, the downloaded file is saved by the IIS service account which is probably different from that of the user used to create export files.

  I agree; However, the disk space is a possible problem since it is certainly possible that you used the last disk space to import the file and then it would be impossible to generate the. DAT files. It would be easy enough to check out as well.

  Regarding problems of file permissions, etc., run procmon (http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx) on the server that runs the back-end FDM services. You see all file and registry activity. (NOTE: you'll want to filter up to just the process that you want to watch, otherwise, it will be a ridiculous amount of information)

  If there is a permissions error, you will see it. If the disk space, you will see that too.

  Other suggestions:

  Check that the logs of Windows AND check your PIF error log. You may well find a definitive answer in there.

  P.S. The one gripe I have with FDM is that, sometimes, the end-user error messages have NOTHING to do with the real problem or are just confused or misleading. Otherwise, great product.

• spatial databases give errors in the log when exporting

  My databases of export fine, but Spatial databases installed show these errors in the logs for export...
  database v11.2.0.2 Enterprise Group of 11 patches
  
  ORA-39127: unexpected error of the call to local_str: = SYS. DBMS_EXPORT_EXTENSION. GET_DOMAIN_INDEX_METADATA('PARKING_SI','I_NAVTEQ','SDO_INDEX_METHOD_10I','MDSYS',11.02.00.00.00,newBlock,0)
  ORA-01403: no data found
  ORA-01403: no data found
  ORA-06512: at "SYS." DBMS_EXPORT_EXTENSION", line 270
  ORA-06512: at line 1
  ORA-06512: at "SYS." Dbms_metadata", line 6498
  
  
  expdp system / * DIRECTORY = export DUMPFILE = OSOW. DMP LOGFILE = OSOW. JOURNAL FULL = Y = 4 PARALLEL
  
  also tried with sys as sysdba. same results

  Hello

  Install the patch Patch: 10402740

  problem: ORA-39127 ORA-6512 in SYS. DBMS_EXPORT_EXTENSION during export Datapump of index of the field

  Kind regards
  Rakesh

• Windows ME error after installing an Ethernet network card: "DEVCON. EXE FILE IS LINKED TO THE LACK OF EXPORT SETUPAPI. DLL:CM_FREE_LOG_CONF_HANDLE ".

  I installed 32-bit network card Ethernet 10/100mbps in a tower of E which has Windows Millennium Edition.  When I tried to run the C/D that came with it I got the message, "DEVCON. EXE FILE IS LINKED TO THE LACK OF EXPORT SETUPAPI. DLL:CM_FREE_LOG_CONF_HANDLE' in the network configuration panel it lists the network adapter as a TCP/IP Protocol, but could not get on the internet. In the past, the only way this computer connected to the internet was through a dial-up access. Any help would be greatly appreciated.

  original title: problem of setting up a network of maps by ME

  Hello

  Windows ME (Windows Millennium Edition) is a Microsoft product.

  There is more support available for Windows Millennium Edition.

  
  Reference: end of support for Windows 98, Windows Me, and Windows XP Service Pack 1

• I have a subscription to Adobe export in PDF, but when I try to access my account (enter my email and password) I get the error message: drive does not have the ability to access this service. What I am doing wrong?

  I had a subscription to the application for export to convert PDF files into Word documents for several years with no problems. Now, when I enter my email address and password, player tells me that it cannot access the service. I know the password is correct, because it works on Adobe's Web site. If something has changed? Why can't I access the export function that I used before and that I paid for?

  Hello

  Try to access this service by means of travel.

  https://cloud.Acrobat.com/EXPORTPDF

  Let us know if you encounter any problems at the moment or it works fine.

  The password you enter must be a saved password associated with your Adobe ID

  Concerning

  Sukrit diallo

• The police when export (preview) or editing error.

  I just bought a new iMac, and since then, I have problems with the fonts. In the screenshot I attached, it is said that there is a police problem. On this page, for example, on the menu, I regularly use part on the title (in white), I use Helvetica and on the text, I use Acumin Pro. All these fonts (except Helvetica) are Web. But Helvetica is a standard font, so where is the problem.

  On the first screen, that's what I have (everything is fine) in Design view. When I try to enter the review mode, you can see in the screenshot of second and third I. You will notice that the police in the menu bar has changed, and you will see the error message.

  What is the problem? Y at - it a cache somewhere that I can empty? Thank you.

  

  

  Have you tried perono passer TypeKit? With your subscription CC, it seems to me that you can use Carriage.

• I get this error when you export from Lightroom 5 but the export complete despite the error.

  

  It is because the box "after export" in the section of post-processing at the bottom of the export dialog box is empty, which is not valid. Use the drop-down list and select one of the options (doing nothing is fine), and then try exporting again.

• I'll have a publication error during export

  Need help, then click Export on my film I get unable to prepare the project for publication (the project might not be prepared for publication because the error) error in user parameter list I don't know what that means or how to fix it

  take the screenshot of the entire screen when you get the error

  How to take a screenshot on your Mac - Apple Support

  Take a screenshot

  1. Press command (⌘) - Shift - 3.
  2. Find the screenshot as a PNG on your desktop file.

  

• Incapable of / the share of exports of iMovie

  Hello

  I can't try to share/export iMovie (10.1.1) to a file. The process hangs at a random time or throws an error 10008.

  It does not matter what video I try to export, for 2-3 months I always get the same result. As you can imagine, it's very frustrating.

  Here is my card of Macbook:

  MacBook Pro (13-inch, mid-2012)

  Processor: Intel Core i5 2.5 GHz

  Memory: 4 GB 1600 MHz DDR3

  Graphics card: Intel HD Graphics 4000 1536 MB

  An excerpt from the log of my last attempt. I hope someone can help. Thank you:

  23/04/2016 15:26:30.000	syslogd [45]	The sender of the ASL statistics
  23/04/2016 15:26:31.430	iMovie [5103]	The AVF error: failure of the control capacity of Perf: 0xe00002be
  23/04/2016 15:29:56.970	iMovie [5103]	The AVF error: failure of the control capacity of Perf: 0xe00002be
  23/04/2016 15:29:58.723	iMovie [5103]	The AVF error: failure of the control capacity of Perf: 0xe00002be
  23/04/2016 15:30:22.000	kernel [0]	CoreStorageGroup::completeIORequest - error 0xe00002ca detected by LVG "Macbook 1 TB" (E62B807F-275E-4437-95FB-247B7B700578), HP AB3CF02A-DF89 - 4 d 19-B41A-F8F6DE176939, near LV byte offset = 264251985920.
  23/04/2016 15:30:22.000	kernel [0]	Disc 1: i/o error.
  23/04/2016 15:30:44.000	kernel [0]	CoreStorageGroup::completeIORequest - error 0xe00002ca detected by LVG "Macbook 1 TB" (E62B807F-275E-4437-95FB-247B7B700578), HP AB3CF02A-DF89 - 4 d 19-B41A-F8F6DE176939, near LV byte offset = 264369913856.
  23/04/2016 15:30:44.000	kernel [0]	Disc 1: i/o error.
  23/04/2016 15:31:57.207	iMovie [5103]	The AVF error: failure of the control capacity of Perf: 0xe00002be
  23/04/2016 15:33:30.544	iMovie [5103]	The AVF error: failure of the control capacity of Perf: 0xe00002be
  23/04/2016 15:33:31.311	iMovie [5103]	The AVF error: failure of the control capacity of Perf: 0xe00002be
  23/04/2016 15:34:26.602	iMovie [5103]	The AVF error: failure of the control capacity of Perf: 0xe00002be
  23/04/2016 15:34:28.357	iMovie [5103]	The AVF error: failure of the control capacity of Perf: 0xe00002be
  23/04/2016 15:34:30.343	com.apple.Safari.SafeBrowsing.Service [4473]	tcp_connection_destination_perform_socket_connect 31 connectx to 2a00:1450:4009:809::200e.443@0 failed: [65] no route to host
  23/04/2016 15:34:30.883	com.apple.Safari.SafeBrowsing.Service [4473]	tcp_connection_destination_perform_socket_connect 32 connectx to 2a00:1450:4009:80f::200e.443@0 failed: [65] no route to host
  23/04/2016 15:34:56.358	iMovie [5103]	The AVF error: failure of the control capacity of Perf: 0xe00002be
  23/04/2016 15:34:58.104	iMovie [5103]	The AVF error: failure of the control capacity of Perf: 0xe00002be
  23/04/2016 15:36:15.000	kernel [0]	CoreStorageGroup::completeIORequest - error 0xe00002ca detected by LVG "Macbook 1 TB" (E62B807F-275E-4437-95FB-247B7B700578), HP AB3CF02A-DF89 - 4 d 19-B41A-F8F6DE176939, near LV byte offset = 264647991296.
  23/04/2016 15:36:15.000	kernel [0]	Disc 1: i/o error.
  23/04/2016 15:37:15.000	syslogd [45]	The sender of the ASL statistics
  23/04/2016 15:39:58.662	iMovie [5103]	CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
  23/04/2016 15:39:58.663	iMovie [5103]	CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
  23/04/2016 15:39:58.763	iMovie [5103]	CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
  23/04/2016 15:39:58.768	iMovie [5103]	CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
  23/04/2016 15:39:58.780	iMovie [5103]	CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
  23/04/2016 15:39:58.782	iMovie [5103]	CGContextConvertRectToDeviceSpace: context not valid 0x0

  . If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.804 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.824 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.888 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.889 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.891 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.891 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.891 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.892 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.893 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.894 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.894 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.894 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.895 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.895 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:58.925 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:59.085 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:59.087 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:59.102 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:59.105 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:59.119 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:39:59.123 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:40:13.880 Console [5120] Unable to connect (_consoleX) out of (NSApplication) (ConsoleX): missing setter or instance variable 23/04/2016 15:40:28.903 Safari [5082] tcp_connection_tls_session_error_callback 19 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22 23/04/2016 15:41:25.632 Safari [5082] KeychainGetICDPStatus: key :-25300 23/04/2016 15:41:25.632 Safari [5082] KeychainGetICDPStatus: status: power off 23/04/2016 15:41:32.455 syncdefaultsd [2573] [AOSAccounts]: [__52-[ACAccountStore (iCloudAccount) icaAppleAccountType] _block_invoke]: accountTypeWithIdentifier returned the error: Domain = com.apple.accounts error Code = 10002 "(null)". 23/04/2016 15:41:32.455 syncdefaultsd [2573] [AOSAccounts]: [-[ACAccountStore (iCloudAccount) icaAppleAccounts]]: icaAppleAccountType returned no account type 23/04/2016 15:42:14.053 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:42:14.064 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:42:14.066 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:42:14.263 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:42:14.315 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:42:14.321 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:42:14.323 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:42:14.330 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:42:14.346 iMovie [5103] CGContextConvertRectToDeviceSpace: context not valid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable. 23/04/2016 15:42:27.223 SDM [65] a 10, 1001 (DiskStore.Normal:2382) 1.633393

  I'm having the same problem, I tried all day export a movie 34 minutes but still get this error after about 20 minutes: "video rendering error: 10008.

  I have:

  MacBook Pro 15 inch

  OS X El Capitan 10.11.4

  Processor 2.3 GHz

  8 GB 1600 MHz DDR3 memory

  I hope someone can help, thanks in advance

• Windows Update fails with the error 'WindowsUpdate_0000057E '.

  I have windows vista, but my microsoft office is 2002.

  For the latest updates of the week 2 windows keep failing.
  1 security Update for Microsoft Excel 2002 (KB959988)
  2. Update for Office XP (KB933388)

  Whenever the update fails, I get the error "WindowsUpdate_0000057E".

  I'm not good with computers and need help on how to fix this...
  

  

  When you try to download an ActiveX control, install an update to Windows or to a Windows component, install a service pack for Windows or to a Windows component, or install a Microsoft or third-party software, you may experience one or more of the following symptoms:

  • You may receive the following error message when you try to install a program or update:
    Digital signature not found
    The Microsoft digital signature affirms that software has been tested with Windows and that the software has not been changed since then, it has been tested.
    The software you are about to install does not contain a Microsoft digital signature. There is therefore no guarantee that this software works correctly with Windows.
    Package name
    If you want to search for Microsoft digitally software signed, refer to the Windows Update Web site at http://windowsupdate.microsoft.com to see if one is available.
    Do you want to continue the installation?

    If you click Details, you receive the following message is displayed:

    Microsoft Windows
    The signature on the software package you want to install is not valid. The package is not signed correctly.

    After you click OK in the first error message dialog box, you may receive a message that States that the installation was successful, or you may receive the following error message:

    Name of the Update Package
    The cryptographic operation failed due to a local security option setting.
  • When you try to install an update or to install a service pack, you may receive an error message that is similar to one of the following:
    • Name of the Update Package
  
  The Setup program could not verify the integrity of the file Update.inf. Make sure the cryptographic service is running on this computer.
• Failed to install catalog files.
• The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this testing is important).

  This software will not be installed. Contact your system administrator.

• The software you are installing has not passed Windows Logo testing to verify its compatibility with this version of Windows. (Tell me why this testing is important).
• When you try to install a service pack Windows XP, you may receive an error message similar to the following:
  Service Pack 1 Setup could not verify the integrity of the file. Make sure the cryptographic service is running on this computer
• When you try to install Microsoft Data Access Components (MDAC) 2.8, you may receive an error message similar to the following:
  «"" "INF. cause installation failure: the timestamp signature and/or certificate could not be verified or is incorrect.»»»"
• The %WINDIR%\System32\CatRoot2\Edb.log may reach 20 megabytes (MB) even though the file is typically less than 1 MB.
• When you try to install a package from the Windows Update Web site or the Microsoft Update Web site, you may receive a message that is similar to the following:
  The software has not passed Windows logo testing and will not be installed.
• When you examine the file % systemroot%\Windowsupdate.log, you should see an entry for one of the following errors:
  • 0 x 80096001
  • 0 x 80096005
  • 0 x 80096010
  • 0x800B0001
  • 0x800B0003
  • 0x800B0004
  • 0x800B0109
  • 0x8007F0DA
  • 0x8007f01e
• When you use Microsoft windows update on a Windows XP-based computer, the update process may fail and you may receive an error message "0x8007f007". This can happen regardless of what type of update you select.

The Svcpack.log file may contain entries that are similar to the following:

937.406: GetCatVersion: failed to retrieve version information from C:\WINDOWS\system32 \CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\Tmp.0.scw.cat with error 0 x 57 937.437: GetCatVersion: failed to retrieve the version information of C:\WINDOWS\Tmp.0.scw.cat with error 0 x 80092004 940.344: InstallSingleCatalogFile: failure failed for Tmp.0.scw.cat; error = 0xfffffbfe. 940.344: DoInstallation failed failed: STR_CATALOG_INSTALL_FAILED 955.125: UnRegisterSpuninstForRecovery, failed to delete SpRecoverCmdLine, 0 error value x 2 955.125: DoInstallation: has no cancellation of registration of spuninst.exe for recovery. 962.656: cancel registration of uninstall-> Windows Server 2003 Service Pack, 0 962.656: impossible to install catalog files. 1448.406: message displayed to the user: cannot install catalog files. 1448.406: user Input: OK 1448.406: Update.exe extended error code = 0xf01e 1448.406: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.
Back to top

CAUSE

This problem may occur if one or more of the following conditions are met: Log...
This problem may occur if one or more of the following conditions are met:
• Log file or database corruption exists in the folder % Systemroot%\System32\Catroot2.
• Cryptographic services is set to disabled.
• Other Windows files are corrupted or missing.
• The timestamp signature or the certificate cannot be verified, or is incorrect.
• The hidden attribute is set to the folder %windir%, or one of its subfolders.
• No unsigned installation behavior group policy setting (Windows 2000 only) is set to do not allow installation or warn, but allow installationor the policy of binary value is not set to 0 in the following registry key:
  The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
• The group policy enable trusted publisher lockdown setting is turned on, and you do not have the appropriate certificate in your trusted publishers certificate store. This group policy setting is under User Configuration, under Windows settings, Internet Explorer Maintenance, under Security, under Authenticode settings in the Group Policy MMC snap-in.
• You install Internet Explorer 6 SP1 and the update of security 823559 (MS03-023) is installed. For more information about this issue, click on the number below to view the article in the Microsoft Knowledge Base:
  828031 (http://support.microsoft.com/kb/828031/) error "the software you are installing has not passed Windows Logo testing...". "message when you try to install Internet Explorer 6 Service Pack 1
• The software distribution folder is corrupted.
Back to top

RESOLUTION

To resolve this problem, use the following methods. Once you perform the operations...
To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

Back to top

Method 1: Rename the Edb.log file rename the Edb.log file, and then try again to install the program. To rename the Edb.log file, follow these steps:

1. Click Start, click run, type cmd in the Open box, and then OK.

   Note On a Windows Vista-based computer, click Start, type cmd in the box to search for text and right click on cmd.exe, and then click run as administrator.

2. At the command prompt, type the following command and press ENTER:
   Ren %systemroot%\system32\catroot2\Edb.log *.tst

Back to top

Method 2: Set the Services of cryptography on AutoSet to automatic Cryptographic Services and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:

1. Start the Administrative Tools utility in control Panel.
2. Double-click Services.
3. Click Cryptographic Services, and then click Properties.
4. Click Automatic for Startup type, and then click Start.

Note Windows 2000 does not list Cryptographic Services in the SERVICES Administration utility.

Back to top

Method 3: Rename the folder Catroot2 rename the Catroot2 (Windows XP and Windows Server 2003 only) folder and then try to install the program again.

Note Skip this method if the operating system is Windows 2000.

To rename the Catroot2 folder, follow these steps:

1. Click Start, click run, type cmd, and then click OK.
2. At the command prompt, type the following commands and press ENTER after each line:
   net stop cryptsvc
   Ren %systemroot%\System32\Catroot2 oldcatroot2
   net start cryptsvc
   output
3. Remove all tmp*.cat to the following folder:
   % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

   If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

Back to top

Method 4: Reregister DLL files that are associated with Cryptographic Services for files .dll registry that are associated with Cryptographic Services, follow these steps:

1. Click Start, click run, type cmd in the Open box, and then OK.

   Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

2. At the command prompt, type the following commands and press ENTER after each command:
   regsvr32 /u softpub.dll
   regsvr32 /u wintrust.dll
   regsvr32 /u initpki.dll
   regsvr32 /u dssenh.dll
   regsvr32 /u rsaenh.dll
   regsvr32 /u gpkcsp.dll
   regsvr32 /u sccbase.dll
   regsvr32 /u slbcsp.dll
   regsvr32 /u mssip32.dll
   regsvr32 /u cryptdlg.dll
   output

   Note If you are prompted, click OK .

   Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

3. Restart your computer.
4. Click Start, click run, type cmd in the Open box, and then click OK.
5. At the command prompt, type the following commands and press ENTER after each command:
   regsvr32 softpub.dll
   regsvr32 wintrust.dll
   regsvr32 initpki.dll
   regsvr32 dssenh.dll
   regsvr32 rsaenh.dll
   regsvr32 gpkcsp.dll
   regsvr32 sccbase.dll
   regsvr32 slbcsp.dll
   regsvr32 mssip32.dll
   regsvr32 cryptdlg.dll
   output

   Note If you are prompted, click OK .

   Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

6. Restart the computer.
Back to top

Method 5: Remove the hidden %windir%\System32 and its subfolders attribute

1. Click Start, click run, type cmd in the Open box, and then OK.

   Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

2. At the command prompt, type the following commands, pressing ENTER after each line:
   attrib s h % windir %
   attrib s h %windir%\system32
   attrib s h %windir%\system32\catroot2

output
Back to top

Method 6: Set a strategy without driver signature silently succeed if you are running a version of Windows 2000, set the silent success no unsigned installation behavior group policy setting. This group policy setting located under Computer Configuration, under Windows settings, under security settings, under local policies, under Security Options in the Group Policy MMC snap-in. If you are running Windows XP or a later version of Windows, this group policy setting is no longer supported. In this case, follow these steps to resolve this problem:

1. Click Start, click run, type regedit, and then click OK.

   Note On a Windows Vista-based computer, click Start, type regedit in the Search box and click on regedit.exe, and then click run as administrator.

2. Locate and then click the following key in the registry:
   The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
3. Right-click on the Policy binary value, and then click change.
4. The value data will appear in the following format:
   0000 02

   Press DELETE to remove the current value (02 in this example), and then type 0 (the current value will now appear as 00).

5. Click OK, and then quit the registry editor.
Back to top

Method 7: Temporarily turn off Trusted Publishers Lockdown and install the certificates to your trusted publishers certificate store you can continue to use the group policy enable trusted publisher lockdown setting, but you must first add the certificates in your trusted publishers certificate store. To do this, disable the group policy enable trusted publisher lockdown setting, install the certificates in your certificate and then trusted publishers store on the setting of group policy enable trusted publisher lockdown again. To install the certificate suitable for Microsoft Windows and Microsoft Internet Explorer updates, follow these steps:

1. Download the product of Microsoft update you want to install from the Microsoft Download Center, the Windows Update Catalog or the Microsoft Update Catalog. For more information about how to download updates from Microsoft Download Center, click the number below to view the article in the Microsoft Knowledge Base:
   119591 (http://support.microsoft.com/kb/119591/) how to obtain technical support files from Online Services Microsoft

   For more information about how to download updates from the Windows Update Catalog, click on the number below to view the article in the Microsoft Knowledge Base:

323166 (http://support.microsoft.com/kb/323166/) how to download updates that include drivers and hotfixes from the Windows Update Catalog
• Extract the package to update product in a temporary folder. The command line that you use to do this depends on the update that you are trying to install. View the Microsoft Knowledge Base article associated with the update to determine the command line switches appropriate that you will use to extract the package. For example, to extract the 824146 security for Windows XP update to the C:\824146 folder, run Windowsxp-kb824146 - x 86 - enu - x: c: \824146. To extract the 828750 security for Windows XP update to the C:\828750 folder, run q828750.exe/c t:c:\828750.
• Right click on the file KBNumber.cat to the package to update product to the temporary folder you created in step 2, and then click Properties.

  Note The KBNumber.cat file may be in a subfolder. For example, the file may be in the C:\824146\sp1\update folder or in the C:\824146\sp2\update folder.

• On the Digital Signatures tab, click the digital signature and then click Details.
• Click view certificate, and then click install Certificate.
• Click Next to start the Certificate Import Wizard.
• Click place all certificates in the following store, and then click Browse.
• Click approved publishers, and then click OK.
• Click Next, click Finish, and then click OK.
Back to top

Method 8: Check the status of all certificates in the certification path and import missing certificates or damaged from another computer to verify certificates in the path of certificate for a Windows or Internet Explorer product update, follow these steps: step 1: Verify Microsoft certificates

1. In Internet Explorer, click on Toolsand then click Internet Options.
2. On the content tab, click certificates.
3. Certificate authorities roots of trust tab, double-click Microsoft Root Authority. If this certificate is missing, go to step 2.
4. On the general tab, make sure that the dates valid from are 10/01/1997 to 12/31/2020.
5. Under the Certificate path tab, verify that this certificate is OK appears under certificate status.
6. Click OKand then double-click the NO LIABILITY ACCEPTED certificate.
7. On the general tab, make sure that the dates valid from are 11/05/1997 to 01/07/2004.
8. On the Certificate path tab, check whether the certificate has expired or is not yet valid or this certificate is OK appears under certificate status.

   Note Although this certificate is expired, the certificate will continue to work. The operating system may not work properly if the certificate is missing or revoked. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

   293781 (http://support.microsoft.com/kb/293781/) Trusted certificate root that are required by Windows 2000, Windows XP and Windows Server 2003
9. Click OKand then double-click the GTE CyberTrust Root certificate. You can have more than one of these certificates with the same name. Check the certificate that has an expiration date of 02/23/2006.
10. On the general tab, make sure that the dates valid from are "23/02/1996-02/23/2006."
11. Under the Certificate path tab, verify that this certificate is OK appears under certificate status.

    Note Although this certificate is expired, the certificate will continue to work. The operating system may not work properly if the certificate is missing or revoked. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

293781 (http://support.microsoft.com/kb/293781/) Trusted certificate root that are required by Windows 2000, Windows XP and Windows Server 2003
• Click OK, and then double-click Thawte Timestamping CA.
• On the general tab, make sure that the dates valid from are "31/12/1996 to 12/31/2020."
• Under the Certificate path tab, verify that this certificate is OK appears under certificate status.

Step 2: Import the missing certificates or damaged if one or more of these certificates are missing or corrupted, export the missing certificates or damaged on another computer, and then install the certificates on your computer. To export certificates to another computer, follow these steps:

1. In Internet Explorer, click on Toolsand then click Internet Options.
2. On the content tab, click certificates.
3. Certificate authorities roots of trust tab, click the certificate you want to export.
4. Click export, and then follow the instructions to export the certificate as a DER encoded Binary x.509 (.) REB) file.
5. Once the certificate file has been exported, copy it to the computer where you want to import.
6. On the computer where you want to import the certificate, double-click the certificate.
7. Click install Certificate, and then click Next.
8. Click Finish, and then click OK.
Back to top

Method 9: Clear the temporary file and restart the hotfix installation or the installation of the service pack Note Skip this method if the operating system is Windows 2000.

To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

1. Remove all tmp*.cat of the following folders:

   systemroot\system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

   systemroot\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

2. Delete all the kb*.cat files in the following folders:
   % systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
   % systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
3. Remove all the oem *. * files in the % systemroot %\inf folder.
4. At the command prompt, type the following commands. Press ENTER after each command.
   net stop cryptsvc
   Ren %systemroot%\System32\Catroot2 oldcatroot2
   net start cryptsvc
   output
5. Restart the installation of the patch failed or the installation of the service pack.
Back to top

Method 10: Empty the software distribution folder

1. Click Start, click run, type services.msc and click OK.

Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.mscand then click run as administrator.

• In the Services (Local) pane, click automatic updates, and then click stop.
• Reduce the Services (local) window.
• Select all the contents of the Windows distribution folder, and then delete them.

  Note By default, the Windows distribution folder is located in the folder drive: \Windows\SoftwareDistribution. In this place, the drive is a placeholder for the drive where Windows is installed.

• Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
• In the Services (Local) pane, click automatic updates, and then click Start.
• Restart the computer, and then run Windows Update again.
Back to top

Method 11: Perform an upgrade on site for more information about how to perform an upgrade on the spot, click on the number below to view the article in the Microsoft Knowledge Base:

315341 (http://support.microsoft.com/kb/315341/) how to perform an upgrade on the spot (reinstallation) of Windows XP
Back to top

MORE INFORMATION

For more information about a resolution that is intended for Windows 2000 only.
For more information about a resolution that is intended for Windows 2000 only, click on the number below to view the article in the Microsoft Knowledge Base:
281458 (http://support.microsoft.com/kb/281458/) error message when you install a service pack Windows 2000 or product update
This problem has been reported to occur with the following updates:
328310 (http://support.microsoft.com/kb/328310/) MS02-071: a failure in management of Windows WM_TIMER messages may allow elevation of privileges
810565 (http://support.microsoft.com/kb/810565/) of the hyperlinks open in Internet Explorer instead of in default browser or Help and Support Center
327979 (http://support.microsoft.com/kb/327979/) game stops responding (hangs) or when the introductory video is played
322011 (http://support.microsoft.com/kb/322011/) you cannot preview a fax in the Fax Console
811630 (http://support.microsoft.com/kb/811630/) HTML Help update to limit functionality when it is invoked with the window.showHelp method)
810577 (http://support.microsoft.com/kb/810577/) MS03-005: a buffer uncontrolled in the Windows Redirector may allow elevation of privileges
329441 (http://support.microsoft.com/kb/329441/) you cannot create a network connection after you restore Windows XP
329170 (http://support.microsoft.com/kb/329170/) MS02-070: a flaw in SMB signing may permit group policy to change
810833 (http://support.microsoft.com/kb/810833/) MS03-001: buffer uncontrolled in the Locator service may allow code to run
For more information about configuring automatic updates in Windows XP, click on the number below to view the article in the Microsoft Knowledge Base:
306525 (http://support.microsoft.com/kb/306525/) how to configure and use automatic updates in Windows XP

Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."