spatial databases give errors in the log when exporting

Similar Questions

• Error in the logs when a workflow running on the web client of vSphere WARN {} [TypeQualifierToDecoratorConverter] could not find the mapping for: class ch.dunes.model.type.qualifier.TQCallerParameter, [kind:null, name:contextualParameter, value: __NULL__

  I see this error:

  WARN {} [TypeQualifierToDecoratorConverter] could not find the mapping for: class ch.dunes.model.type.qualifier.TQCallerParameter, [kind:null, name:contextualParameter, value: __NULL__]

  pop up in newspapers of vCO a few times on a workflow when I try to run it from the web client of vSphere.  I wonder if it is somehow contributing to the time it takes to render the page.  We never saw it or someone has a clue about what might be the cause.  Newspapers are clean when I run the workflow of the vCO client.

  TQCallerParameter is a kind of decorator that is not exposed in the REST API. This warning message is safe and does not affect performance at all.

  You don't see it during execution of the workflow of vCO customer because the customer vCO does not use the REST API and therefore does not need to run conversions Decorator.

• Download this message when I try to run Lightroom. Point procedure entry AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library - system: windows 7 64 bit is no error in the log file

  Download this message when I try to run Lightroom. The procedure entry point AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library

  system: windows 7 64-bit

  There is no error in the log file.

  no error in scannow at the command prompt.

  

  Hi Michela,

  Lightroom makes a call the the AGkernel.dll file, but the file isn't sure what to do because it can't find the line of code within himself to answer. This can happen for several reasons, that fall within these two broad categories: AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

  Here are some things you can do to fix the file:

  -Record again with Windows AGKernel.dll: https://support.microsoft.com/en-us/kb/249873

  -Windows repair: https://support.microsoft.com/en-us/kb/929833

  -Install all the updates that are available for Windows: Windows Installer updates

  -Uninstall and reinstall Lightroom

  Kind regards

  Tanuj

• We have seen this error in the log, this hinders not, but any suggestion for this.

  We have seen this error in the log file, when execution of the module of the application, have two to customize the view objects added to it.

  java.sql.SQLException: invalid name model: FUSION_RUNTIME. FND_TABLE_OF_VARCHAR2_255

  at oracle.jdbc.oracore.OracleTypeADT.initMetadata(OracleTypeADT.java:599)

  at oracle.jdbc.oracore.OracleTypeADT.init(OracleTypeADT.java:506)

  at oracle.sql.ArrayDescriptor.initPickler(ArrayDescriptor.java:2143)

  to oracle.sql.ArrayDescriptor. < init > (ArrayDescriptor.java:315)

  at oracle.sql.ArrayDescriptor.createDescriptor(ArrayDescriptor.java:222)

  at oracle.sql.ArrayDescriptor.createDescriptor(ArrayDescriptor.java:190)

  at oracle.sql.ArrayDescriptor.createDescriptor(ArrayDescriptor.java:172)

  at oracle.sql.ArrayDescriptor.createDescriptor(ArrayDescriptor.java:130)

  at oracle.apps.fnd.applcore.common.ApplSessionManagement.createSession(ApplSessionManagement.java:323)

  at oracle.apps.fnd.applcore.common.ApplSessionManagement.createSession(ApplSessionManagement.java:191)

  at oracle.apps.fnd.applcore.common.ApplSessionManagement.createAttachedSession(ApplSessionManagement.java:663)

  at oracle.apps.fnd.applcore.oaext.model.OAApplicationModuleImpl.prepareSession(OAApplicationModuleImpl.java:875)

  at oracle.jbo.server.ApplicationModuleImpl.prepareSession(ApplicationModuleImpl.java:6892)

  at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:181)

  at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:9075)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4603)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2533)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2343)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3242)

  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:572)

  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:505)

  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:500)

  at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:516)

  at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:862)

  at oracle.jbo.jbotester.binding.TesterBinding.getApplicationModule(TesterBinding.java:189)

  at oracle.jbo.jbotester.binding.TesterBinding.initApplicationModule(TesterBinding.java:168)

  to oracle.jbo.jbotester.binding.TesterBinding. < init > (TesterBinding.java:164)

  to oracle.jbo.jbotester.binding.TesterBinding. < init > (TesterBinding.java:128)

  at oracle.jbo.jbotester.MainFrame.loadConfiguration(MainFrame.java:632)

  at oracle.jbo.jbotester.MainFrame.processArgs(MainFrame.java:597)

  at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:428)

  -------------------------

  any suggestion to remove this error.

  Thank you

  VIpin

  Please add the below setting jvm

  -Doracle.jdbc.createDescriptorUseCurrentSchemaForSchemaName = true

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• ERRORS in the LOG of the capture of 2291 on UPDATE statement errors

  We are running Oracle Database 10 g Enterprise Edition Release 10.2.0.4.0 - Production 64 - bit with the options of partitioning, OLAP, Data Mining and Real Application Testing
  
  We used often successfully the clause of the logging of errors during the execution of the batch to the database inserts. However, we now have a situation where an UPDATE statement is default and make back up when it encounters a referential constraint foreign key [ORA-02291]. It registers with success of coercion errors [ORA-02290] Check. Foreign keys are not carried over, and they have nothing to do with unique constraints or indexes on the table that is the target of the UPDATE statement. The logging of errors table was created using the DBMS_ERRLOG package. We have created to make sure that we introduced column format errors. The same problem occurs. The UPDATE statement tries to update about 12000 lines. Any help in understanding this problem would be appreciated.
  
  Here's the error statement
  ORA-02291: integrity constraint (OIFS. FRAME_FK07) violated - key parent not found
  
  Here is the statement of the problem and its PLSQL block surrounding:
  
  BEGIN < < update_records > >
  UPDATE image f
  SET (company_name,
  address1_line,
  address2_line,
  address1_city,
  address1_state,
  address1_zip,
  contact1_name,
  contact1_phone_number,
  update_date,
  update_user,
  -Comments,
  facility_name,
  facility_type,
  doing_business_as,
  contact1_phone_ext,
  contact1_fax,
  contact1_email,
  contact2_name,
  contact2_phone_number,
  contact2_phone_ext,
  contact2_fax,
  contact2_email,
  source_survey,
  source_status,
  address2_city,
  address2_state,
  address2_zip,
  facility_location_number,
  attention_line,
  company_official,
  facility_irs_code
  ) =
  (SELECT company_name,
  address1_line,
  address2_line,
  address1_city,
  address1_state,
  address1_zip,
  contact1_name,
  contact1_phone_number,
  SYSDATE,
  user_in,
  facility_name,
  facility_type,
  doing_business_as,
  contact1_phone_ext,
  contact1_fax,
  contact1_email,
  contact2_name,
  contact2_phone_number,
  contact2_phone_ext,
  contact2_fax,
  contact2_email,
  source_survey,
  source_status,
  address2_city,
  address2_state,
  address2_zip,
  facility_location_number,
  attention_line,
  company_official,
  facility_irs_code
  Oifs.respondent r
  WHERE r.cin = f.cin
  )
  WHERE f.cin IN
  (SELECT cin
  Of
  (SELECT cin,
  company_name,
  address1_line,
  address2_line,
  address1_city,
  address1_state,
  address1_zip,
  contact1_name,
  contact1_phone_number,
  facility_name,
  facility_type,
  doing_business_as,
  contact1_phone_ext,
  contact1_fax,
  contact1_email,
  contact2_name,
  contact2_phone_number,
  contact2_phone_ext,
  contact2_fax,
  contact2_email,
  source_survey,
  source_status,
  address2_city,
  address2_state,
  address2_zip,
  facility_location_number,
  attention_line,
  company_official,
  facility_irs_code
  OF oifs.respondent
  LESS
  SELECT cin,
  company_name,
  address1_line,
  address2_line,
  address1_city,
  address1_state,
  address1_zip,
  contact1_name,
  contact1_phone_number,
  facility_name,
  facility_type,
  doing_business_as,
  contact1_phone_ext,
  contact1_fax,
  contact1_email,
  contact2_name,
  contact2_phone_number,
  contact2_phone_ext,
  contact2_fax,
  contact2_email,
  source_survey,
  source_status,
  address2_city,
  address2_state,
  address2_zip,
  facility_location_number,
  attention_line,
  company_official,
  facility_irs_code
  OF oifs.frame
  )
  )
  ERROR IN oifs.frame_load_errors LOG
  (job_num |) ' ' || TO_CHAR (SYSDATE, 'YYYYMMDD HH24:MI:SS'). 'update')
  REJECT LIMIT UNLIMITED;
  EXCEPTION
  WHILE OTHERS THEN
  ohub.err_pkg.record_and_continue (' msg_in = > ' problem to update the lines of FIELD ');
  LIFT;
  END update_records;

  I think and that's just a wild guess, is that your table has a trigger... or an associated view has a relaxing place.

• Errors in the log event 20035, 7023, 7035 7036 - can not get online with dial-up or broadband addapter

  Original title: errors in the event log 20035, 7023, 7035, 7036

  Can't get online with dial-up or actions addapter. verified that newspaper and got codes of Thies. They have to do with rasman and the service control manager. I think I need to reset some how back to the line. Thanks for the help.

  Hello

  ·        What is the exact error message you get when you try to connect to the network (the error that comes up on the screen)?

  ·        Who is the manufacturer of the system and what is the model?

  ·        You are using an external modem or a modem internal?

  ·        If he external modem then who is the manufacturer of the modem and what is the model?

  I suggest you follow the steps mentioned in the article below.

  You cannot create a network connection after you restore Windows XP

  http://support.Microsoft.com/kb/329441

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Errors in the log of alerts in mode standby

  Dear all,
  
  We have 10 gr 2 CARS with physical environment Data Guard using ASM, and both have the same disk group names. Let's say the first name of the database is prim and stand by a database name is stdby. We receive the following errors in the standby alert log file:

  Clearing online redo logfile 9 +DG_DATAFILES_AND_FB/prim/onlinelog/group9_2a.rdo
  Clearing online log 9 of thread 2 sequence number 0
  
  Errors in file c:\oracle\product\10.2.0\admin\stdby\bdump\stdby1_mrp0_4288.trc:
  ORA-00313: Message 313 not found; No message file for product=RDBMS, facility=ORA; arguments: [9] [2]
  ORA-00312: Message 312 not found; No message file for product=RDBMS, facility=ORA; arguments: [9] [2] [+DG_DATAFILES_AND_FB/prim/onlinelog/group9_2a.rdo]
  ORA-17503: Message 17503 not found; No message file for product=RDBMS, facility=ORA; arguments: [2] [+DG_DATAFILES_AND_FB/prim/onlinelog/group9_2a.rdo]
  ORA-15173: entry 'prim does not exist in directory '/'
  
  
  Errors in file c:\oracle\product\10.2.0\admin\stdby\bdump\stdby1_mrp0_4288.trc:
  ORA-00344: Message 344 not found; No message file for product=RDBMS, facility=ORA; arguments: [+DG_DATAFILES_AND_FB/prim/onlinelog/group9_2a.rdo]
  ORA-17502: Message 17502 not found; No message file for product=RDBMS, facility=ORA; arguments: [4] [+DG_DATAFILES_AND_FB/prim/onlinelog/group9_2a.rdo]
  ORA-15173: entry 'prim' does not exist in directory '/'

  The errors indicate that the day before trying to find files in the directory + DG_DATAFILES_AND_FB/prim/onlinelog that apparently does not exist in the mode standby. This is the result of the query to redo connects in standby mode:
  

  SQL> SELECT group#, status, member FROM v$logfile where member like '%prim/%'
  /
  
      GROUP#   STATUS         MEMEBER
      ----------     -------            ---------------------------------------------------------------------------------
           9                            +DG_DATAFILES_AND_FB/prim/onlinelog/group9_2a.rdo
           1                            +DG_DATAFILES_AND_FB/prim/standbylogs/sredo1.rdo
          10                           +DG_DATAFILES_AND_FB/prim/onlinelog/group10_1a.rdo
           2                            +DG_DATAFILES_AND_FB/prim/standbylogs/sredo2.rdo
           3                            +DG_DATAFILES_AND_FB/prim/standbylogs/sredo3.rdo
           4                            +DG_DATAFILES_AND_FB/prim/standbylogs/sredo4.rdo
          11                           +DG_DATAFILES_AND_FB/prim/onlinelog/group11_1a.rdo
          12                           +DG_DATAFILES_AND_FB/prim/onlinelog/group12_2a.rdo
  
  8 rows selected.  

  How can we get rid of this error?
  
  Best regards

  After this change (re - create log files), it seems that the archive logs are not applied to sleep automatically. However, if I manually apply, it's OK. What could go wrong?

  If you able to receive the archive/redo logs and the recovery does not occur every time that you start MRP? (or) archives even transfer not in the database pending?
  What is the status of destination of v$ archive_Dest?

  I suggest you according to the output by using the below scripts from primary and standby in coded format.
  http://www.Oracle-CKPT.com/dataguard_troubleshoot_snapper/

• Receive the error on the logging message indicating "problem accessing your user profile.

  I get an error message from the log indicating that there 'a problem accessing your user profile '. About a week or two ago I called Microsoft and Security Support technician run my laptop in safe mode to remove a virus preventing me access to the internet. This problem has been resolved. I have not used my laptop again since then until today.

  See if this helps:

  ·

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• WindowActivationUpdate gives error 0 x 80070422 when you try to install Virtual PC

  When you try to install Virtual PC on my computer Windows 7 Enterprise edition (64-bit), download try first to install WindowsActivationUpdate, but which fails with the error message
  The update installation failed. -Error information 0 x 80070422

  That error often results from a number of Services to be disabled incorrectly, or be unable to start...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• IM have downloaded on windows 10 software adobe reader DC. Cannot install the update 15.009.20069 - gives error 1635. the drive is not all the functions associated with it - does not seem to download documents - opens in mocrosoft edge despiye moxilla fir

  I downloaded the CD player on windows 10. Unable to install the 15.009.20069 update. gives error 1635. Reader is not all functions available - documents opens on the edge of microsoft despite moxilla firefox as my default browser

  Hi Jacqueline,.

  Please check the steps in the article that Sukrit Dhingra shared with you. If in case the issue is not resolved with who perform a clean installation of drive using the cleaning tool and install offline using. Links provided below.

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs

  Adobe - Adobe Acrobat Reader DC Distribution

  To set the default on Windows 10 drive, try the steps from here: Reader/Acrobat is not the default PDF owner | Windows 10 threshold 2

  Thank you

  Abhishek

• Error in the page when the ADF security enabled

  Hello
  
  I created an example page JSF with only a text to output "Hello World!"
  
  When I run the page without activating the safety of the ADF, it works fine.
  
  I activated the ADF security according to the "Enabling Oracle ADF security 29.3" in Guide of Dev for the ADF.
  Now when I run the page, it shows the default login page. I enter username and password and 'send '.
  
  After that, it shows an error with the following error page:
  --------------------------------------------------------------------------
  Error 500 - Internal server error
  java.lang.RuntimeException: cannot find FacesContext
  at javax.faces.webapp.UIComponentClassicTagBase.getFacesContext(UIComponentClassicTagBase.java:1855)
  at javax.faces.webapp.UIComponentClassicTagBase.setJspId(UIComponentClassicTagBase.java:1672)
  at jsp_servlet.__testpage1_jspx._jspService(__testpage1_jspx.java:85)
  at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
  at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3588)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  ------------------------------------------------------------------------------------------------------
  
  Any suggestion/help in this regard is appreciated.
  Thank you

  Hi vbokar! ;)

  I check your application and I noticed that the political ADF seems be grayed in JDev so I re - run the Configuration Wizard for the ADF security.
  Other changes were:
  

• user "vbokar" was added to the application role 'testRole1 '.
  <>changed the password of the user vbokar for "password1" (so I can test it)
  
• changed the home page or from the success_url of ' / TestPage2.jspx ' to ' / faces/TesPage2.jspx.

  Run and Viola! It works!
  Here is the updated file...
  https://docs.Google.com/leaf?ID=0b-coz_ZFqg5XMmQyNGZiNTAtY2YwZC00YWMwLWIxNWItM2ExZWVlOTFjN2Ri&hl=en

  Kind regards

  Pino

  PS. as I also proposed Vikram wire, please build > CleanAll your app. Or better yet, remove it and load the one you sent me.

• Component ActiveX cannot create object. Error code 429. When exporting

  Hi all
  One of my users becomes the below error when exporting a mapping file to Excel, which he was able to do before. I guess that this should not be linked to the record of the adapter as user took before export.
  
  Log is below:
  
  
  * Start the journal entry for the Runtime Error FDM [2012-01-24-14: 21:33] *.
  
  --------------------------------------------------------------------------------
  ERROR:
  Code............................................. 429
  Description... Component ActiveX cannot create object
  Process... clsUtility.mRecordsetToExcel
  The component... upsWDataWindowDM
  Version.......................................... 1111
  Thread........................................... 15876
  
  IDENTIFICATION:
  User............................................. xxxxx
  Name of the computer... xxxxx
  App Name......................................... FDMAPP
  Client App....................................... WebClient
  
  CONNECTION:
  Provider......................................... SQLOLEDB
  ... Database server xxxxx
  Name of the database... hyp_fdm
  Trust connect... Fake
  Connect status... Open connection
  
  GLOBALS:
  Location......................................... HFM
  Location ID... 769
  Location Seg... 23
  Category......................................... Real
  ID of the category... 13
  Period........................................... Dec - 2010
  Period ID........................................ 31/12/2010
  POV Local........................................ Fake
  Language......................................... 1033
  User Level....................................... 1
  All Partitions... True
  Is Auditor....................................... Fake
  
  * Start the journal entry for the Runtime Error FDM [2012-01-24-14: 21:52] *.
  
  
  
  --------------------------------------------------------------------------------
  ERROR:
  Code............................................. 429
  Description... Component ActiveX cannot create object
  Process... clsUtility.mRecordsetToExcel
  The component... upsWDataWindowDM
  Version.......................................... 1111
  Thread........................................... 14044
  
  IDENTIFICATION:
  User............................................. xxxxxx
  Name of the computer... xxxxxx
  App Name......................................... FDMAPP
  Client App....................................... WebClient
  
  CONNECTION:
  Provider......................................... SQLOLEDB
  Server data... xxxxxx
  Name of the database... hyp_fdm
  Trust connect... Fake
  Connect status... Open connection
  
  GLOBALS:
  Location......................................... HFM
  Location ID... 769
  Location Seg... 23
  Category......................................... Real
  ID of the category... 13
  Period........................................... Dec - 2010
  Period ID........................................ 31/12/2010
  POV Local........................................ Fake
  Language......................................... 1033
  User Level....................................... 1
  All Partitions... True
  Is Auditor....................................... Fake
  
  
  Help, please.

  It's probably a DCOM object cannot create a file; You must have MS Excel / Office 2007 on the server.

  T

• Grey outline around the objects when exporting to Photoshop

  Hello

  I have a strange issue when exporting with a simple badge that I'm working on Illustrator to Photoshop.

  Everything seems well within the Illustrator, but when I select my creation and copy and paste into Photoshop, then as a "dynamic object" or "pixels", I get a strange gray outline around the objects that should be hidden.

  I use the latest versions of Illustrator and Photoshop 2015 CC and their installation on Mac OSX El Capitan v. 10.11.3

  Edit: I noticed that the compression of the screenshots, it is difficult to see, but it should be very obvious if you download AI and try it yourself.

  I link to the file: http://bit.ly/1QhIi6i

  Best regards

  Rasmus

  

  

  

  

  I think that the problem is more on the side of Photoshop.

  Rasterize the objects in Illustrator; no visible lines.

  Pixelation in Photoshop; the Ant-aliasing artifacts.

  It is easy to reproduce: put a couple of black oval overlaid. Use Pathfinder > divide

  Now you have perfectly fitting distinct forms.

  Copy and paste into Photoshop; lines.

  Rasterize them (or use the pixelation effect) in Illustrator, copy and paste it into Photoshop. no lines.

• Maintaining the Exif when exporting to JPEG?

  Howdy-

  
  

  What setting should we avoid - that Exif can be displayed when exporting to JPEG?

  example - display JPEG images on a photo forum
  

  
  

  Thank you ~.

  If you want to have the EXIF data available, do not check "minimize metadata" in their export.

  Gossweiler beat

  Switzerland